* Nishanth Menon <nm@xxxxxx> [140605 18:12]: > From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@xxxxxx> > > Add ABB device nodes for OMAP5 family of devices. Data is based on > final production OMAP543x Technical Reference Manual revision Z (April 2013). > Final production Data Manual for OMAP5432 SWPS050F(APRIL 2014). > > [nm@xxxxxx: co-developer and updates to latest documentation] > Signed-off-by: Nishanth Menon <nm@xxxxxx> > Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@xxxxxx> > --- > Original patch (v1): https://patchwork.kernel.org/patch/3555191/ > > Rest of the series was accepted, however, I had to drop this > previously to ensure that the data we introduce is compatible with > production samples and existing pre-production samples on various > OMAP5uEVMs already in circulation. Is this OK to queue for v3.17 or do we need it for the -rc cycle? Regards, Tony > arch/arm/boot/dts/omap5.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index a4ed549..8eee6fb 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -985,6 +985,66 @@ > dma-names = "audio_tx"; > }; > }; > + > + abb_mpu: regulator-abb-mpu { > + compatible = "ti,abb-v2"; > + regulator-name = "abb_mpu"; > + #address-cells = <0>; > + #size-cells = <0>; > + clocks = <&sys_clkin>; > + ti,settling-time = <50>; > + ti,clock-cycles = <16>; > + > + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, > + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; > + reg-names = "base-address", "int-address", > + "efuse-address", "ldo-address"; > + ti,tranxdone-status-mask = <0x80>; > + /* LDOVBBMPU_MUX_CTRL */ > + ti,ldovbb-override-mask = <0x400>; > + /* LDOVBBMPU_VSET_OUT */ > + ti,ldovbb-vset-mask = <0x1F>; > + > + /* > + * NOTE: only FBB mode used but actual vset will > + * determine final biasing > + */ > + ti,abb_info = < > + /*uV ABB efuse rbb_m fbb_m vset_m*/ > + 1060000 0 0x0 0 0x02000000 0x01F00000 > + 1250000 0 0x4 0 0x02000000 0x01F00000 > + >; > + }; > + > + abb_mm: regulator-abb-mm { > + compatible = "ti,abb-v2"; > + regulator-name = "abb_mm"; > + #address-cells = <0>; > + #size-cells = <0>; > + clocks = <&sys_clkin>; > + ti,settling-time = <50>; > + ti,clock-cycles = <16>; > + > + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, > + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; > + reg-names = "base-address", "int-address", > + "efuse-address", "ldo-address"; > + ti,tranxdone-status-mask = <0x80000000>; > + /* LDOVBBMM_MUX_CTRL */ > + ti,ldovbb-override-mask = <0x400>; > + /* LDOVBBMM_VSET_OUT */ > + ti,ldovbb-vset-mask = <0x1F>; > + > + /* > + * NOTE: only FBB mode used but actual vset will > + * determine final biasing > + */ > + ti,abb_info = < > + /*uV ABB efuse rbb_m fbb_m vset_m*/ > + 1025000 0 0x0 0 0x02000000 0x01F00000 > + 1120000 0 0x4 0 0x02000000 0x01F00000 > + >; > + }; > }; > }; > > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
