On 07/07/2014 at 16:25:17 +0200, Maxime Ripard wrote : > Adapt the ramc mapping code to handle multiple ram controllers in the DT. > > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> > --- > arch/arm/mach-at91/setup.c | 26 ++++++++++++++------------ > 1 file changed, 14 insertions(+), 12 deletions(-) > I believe you also need to update the documentation in Documentation/devicetree/bindings/arm/atmel-at91.txt > diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c > index 9c4c7fb323fb..cc520596f23b 100644 > --- a/arch/arm/mach-at91/setup.c > +++ b/arch/arm/mach-at91/setup.c > @@ -393,24 +393,26 @@ static void at91_dt_ramc(void) > { > struct device_node *np; > const struct of_device_id *of_id; > + int idx = 0; > > - np = of_find_matching_node(NULL, ramc_ids); > - if (!np) > - panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); > + for_each_matching_node(np, ramc_ids) { > + at91_ramc_base[idx] = of_iomap(np, 0); > + if (!at91_ramc_base[idx]) > + panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx); > > - at91_ramc_base[0] = of_iomap(np, 0); > - if (!at91_ramc_base[0]) > - panic(pr_fmt("unable to map ramc[0] cpu registers\n")); > - /* the controller may have 2 banks */ > - at91_ramc_base[1] = of_iomap(np, 1); > + idx++; > + } > + > + if (!idx) > + panic(pr_fmt("unable to find compatible ram controller node in dtb\n")); > > of_id = of_match_node(ramc_ids, np); > - if (!of_id) > + if (!of_id) { > pr_warn("ramc no standby function available\n"); > - else > - at91_pm_set_standby(of_id->data); > + return; > + } > > - of_node_put(np); > + at91_pm_set_standby(of_id->data); > } > > static struct of_device_id shdwc_ids[] = { > -- > 2.0.1 > -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html