Hello Bartlomiej, > -----Original Message----- > From: Bartlomiej Zolnierkiewicz [mailto:b.zolnierkie@xxxxxxxxxxx] > Sent: Monday, July 07, 2014 9:01 PM > To: Pratyush ANAND > Cc: Arnd Bergmann (arnd@xxxxxxxx); 'Bjorn Helgaas' > (bhelgaas@xxxxxxxxxx); Mohit KUMAR DCG; spear-devel; linux- > kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux- > pci@xxxxxxxxxxxxxxx; Mark Nicholson > Subject: Re: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support > > > Hi Arnd, > > Any update on status of this patchset? Is it OK for it to go through arm-soc > tree or should it be splitted into separate parts which would go through > pci/phy/arm-soc trees? - These patches are rebased over 3-16-rc3 to go through arm-soc tree. Somehow we are having 'sync' issue in providing web link for spear public repository with these patches. It will be resolve soon, and I will provide the link. > > [ The patchset applies fine to next-20140707 after fixing trivial > reject in drivers/pci/host/Makefile in patch #8. To make it build > the following line from patch #8 needs to be dropped: > > + spin_lock_init(&pp->conf_lock); - yes, I have already considered this while rebasing. Thanks Mohit > ] > > Best regards, > -- > Bartlomiej Zolnierkiewicz > Samsung R&D Institute Poland > Samsung Electronics > > On Thursday, May 22, 2014 05:01:19 PM Pratyush Anand wrote: > > Hi Arnd/Bjorn, > > > > On Mon, May 19, 2014 at 07:55:12PM +0800, Mohit KUMAR wrote: > > > Hello Arnd, > > > > > > > -----Original Message----- > > > > From: Mohit KUMAR DCG > > > > Sent: Tuesday, April 15, 2014 5:20 PM > > > > To: spear-devel; linux-kernel@xxxxxxxxxxxxxxx; > > > > devicetree@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; > > > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > > > Cc: Mohit KUMAR DCG > > > > Subject: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support > > > > > > > > Patch# 1 and 2: Improvement and fixes for SPEAr13xx support. > > > > Patch# 3,4 and 6: Add DT bindings for spear1310/40-miphy, misc and > > > > pcie node Patch# 5: Add spear1310/40-miphy driver and support for > > > > spear1310/40 miphy wrapper. > > > > Patch# 7-9: Add SPEAr13xx PCIe driver and dt support. > > > > > > > > These pathes are tested with linux-3.15 tag of arm-soc tree. > > > > Tested with SPEAr1310 evaluation board with: > > > > - INTEL PRO 100/100 EP card > > > > - USB xhci gen2 card > > > > - Above cards connected through LeCROY PTC switch > > > > > > > > Modifications for SATA are tested with SPEAr1340-evb board > > > > > > > > > > I think 3.16 windows is about to close, are you planning to merge this > series? > > > Pls let me know if something pending on our part. > > > > If you could let us know the status of this patch series inclusion. > > > > Regards > > Pratyush > > > > > > > > Regards > > > Mohit > > > > > > > Changes since v7: > > > > - Rebase over for-linus-3.15 tag of arm-soc tree so that complete > > > > patch series can be applied cleanly. > > > > - Incorporated few comments on comment style and superfluous > > > > comments Changes since v6: > > > > - Split miphy driver for SPEAr1310 and SPEAr1340 > > > > - Some cleanup and incorporated other minor comments Changes since > v5: > > > > - Split DT bindings for misc, miphy-40lp and pcie node into > > > > sepearte patches > > > > - Merge config options PCIE_SPEAR13XX and PCI_MSI into defconfig > > > > patch > > > > - Incorporated other minor comments Changes since v4: > > > > - Uses per device function pointers passed from .data field to > > > > the of_device_id instead of of_device_is_compatible. > > > > - Incorporated other minor comments from v4 > > > > > > > > Changes since v3: > > > > - Phy driver renamed to phy-miphy40lp > > > > - ahci phy hook patch used as suggested by Arnd > > > > - Incorporated other minor comments from v3 > > > > > > > > Changes since v2: > > > > - Incorporated comments to move SPEAr13xx PCIe and SATA phy > > > > specific routines to > > > > the phy framework > > > > - Modify ahci driver to include phy hooks > > > > - phy-core driver modifications for subsys_initcall() > > > > > > > > Changes since v1: > > > > - Few patches of the series are already accepted and applied to > mainline e.g. > > > > pcie designware driver improvements,fixes for IO translation bug, > > > > PCIe dw driver maintainer. So dropped these from v2. > > > > - Incorporated comment to move the common/reset PCIe code to the > > > > seperate driver > > > > - PCIe and SATA share common PHY configuration registers, so move > > > > SATA platform code to the system config driver Fourth patch is > > > > improves pcie designware driver and fixes the IO translation bug. > > > > IO translation bug fix leads to the working of PCIe EP devices connected > to RC through switch. > > > > > > > > Mohit Kumar (1): > > > > SPEAr13xx: defconfig: Update > > > > > > > > Pratyush Anand (8): > > > > clk: SPEAr13XX: Fix pcie clock name > > > > SPEAr13XX: Fix static mapping table > > > > phy: SPEAr1310/40-miphy: Add binding information > > > > SPEAr: misc: Add binding information > > > > phy: SPEAr1310/40-miphy: Add phy driver for PCIe and SATA > > > > SPEAr13XX: Add binding information for PCIe controller > > > > SPEAr13XX: dts: Add PCIe node information > > > > pcie: SPEAr13xx: Add designware wrapper support > > > > > > > > .../devicetree/bindings/arm/spear-misc.txt | 9 + > > > > .../devicetree/bindings/pci/spear13xx-pcie.txt | 14 + > > > > .../devicetree/bindings/phy/st-spear1310-miphy.txt | 12 + > > > > .../devicetree/bindings/phy/st-spear1340-miphy.txt | 11 + > > > > MAINTAINERS | 6 + > > > > arch/arm/boot/dts/spear1310-evb.dts | 4 + > > > > arch/arm/boot/dts/spear1310.dtsi | 93 +++++- > > > > arch/arm/boot/dts/spear1340-evb.dts | 4 + > > > > arch/arm/boot/dts/spear1340.dtsi | 30 ++- > > > > arch/arm/boot/dts/spear13xx.dtsi | 9 +- > > > > arch/arm/configs/spear13xx_defconfig | 16 + > > > > arch/arm/mach-spear/Kconfig | 4 + > > > > arch/arm/mach-spear/include/mach/spear.h | 4 +- > > > > arch/arm/mach-spear/spear1340.c | 127 +------ > > > > arch/arm/mach-spear/spear13xx.c | 2 +- > > > > drivers/clk/spear/spear1310_clock.c | 6 +- > > > > drivers/clk/spear/spear1340_clock.c | 2 +- > > > > drivers/pci/host/Kconfig | 8 + > > > > drivers/pci/host/Makefile | 1 + > > > > drivers/pci/host/pcie-spear13xx.c | 407 > ++++++++++++++++++++ > > > > drivers/phy/Kconfig | 12 + > > > > drivers/phy/Makefile | 2 + > > > > drivers/phy/phy-spear1310-miphy.c | 274 +++++++++++++ > > > > drivers/phy/phy-spear1340-miphy.c | 300 ++++++++++++++ > > > > 24 files changed, 1218 insertions(+), 139 deletions(-) create > > > > mode 100644 Documentation/devicetree/bindings/arm/spear-misc.txt > > > > create mode 100644 > > > > Documentation/devicetree/bindings/pci/spear13xx- > > > > pcie.txt > > > > create mode 100644 Documentation/devicetree/bindings/phy/st- > > > > spear1310-miphy.txt > > > > create mode 100644 Documentation/devicetree/bindings/phy/st- > > > > spear1340-miphy.txt > > > > create mode 100644 drivers/pci/host/pcie-spear13xx.c create mode > > > > 100644 drivers/phy/phy-spear1310-miphy.c create mode 100644 > > > > drivers/phy/phy- spear1340-miphy.c -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
