Linux USB Users
[Prev Page][Next Page]
- RE: [PATCH v3 2/4] usb: aspeed-vhub: fix remote wakeup failure in iKVM use case
- From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
- [PATCH 6/6] usb: musb: dsps: Use platform_get_irq_byname() to get the interrupt
- From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
- [PATCH 3/6] usb: dwc3: Drop unneeded calls to platform_get_resource_byname()
- From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
- [PATCH 5/6] usb: cdns3: Use platform_get_irq_byname() to get the interrupt
- From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
- [PATCH 4/6] usb: isp1760: Use platform_get_irq() to get the interrupt
- From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
- [PATCH 2/6] usb: renesas_usbhs: Use platform_get_irq() to get the interrupt
- From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
- [PATCH 1/6] usb: host: fotg210: Use platform_get_irq() to get the interrupt
- From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
- [PATCH 0/6] usb: sound/soc: Use platform_get_irq*() variants to fetch IRQ's
- From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
- Re: [PATCH v3] extcon: fix extcon_get_extcon_dev() error handling
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [syzbot] KMSAN: uninit-value in ax88772a_hw_reset
- From: syzbot <syzbot+8d179821571093c5f928@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [Bug 215361] SL-6000 zaurus USB error - 'bad CDC descriptors'
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [syzbot] KMSAN: uninit-value in asix_mdio_read (2)
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- [Bug 215361] SL-6000 zaurus USB error - 'bad CDC descriptors'
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [syzbot] KMSAN: uninit-value in asix_mdio_read (2)
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH] usb: fixing some clang warnings inside usb host drivers
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [Bug 215175] thunderbolt: consistent system freezes with Dell U4021QW, general protection fault, probably for non-canonical address 0xdead000000000108, Workqueue: events tb_cfg_request_work [thunderbolt]
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v2 3/4] usb: mtu3: fix list_head check warning
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: [PATCH v2 3/4] usb: mtu3: fix list_head check warning
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/4] usb: mtu3: fix list_head check warning
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: [PATCH] usb: fixing some clang warnings inside usb host drivers
- From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
- [Bug 215361] New: SL-6000 zaurus USB error - 'bad CDC descriptors'
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] usb: fixing some clang warnings inside usb host drivers
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: fixing some clang warnings inside usb host drivers
- From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
- Re: [syzbot] KMSAN: uninit-value in asix_mdio_read (2)
- From: syzbot <syzbot+f44badb06036334e867a@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] USB fixes for 5.16-rc6
- From: pr-tracker-bot@xxxxxxxxxx
- Re: [syzbot] KMSAN: uninit-value in asix_mdio_read (2)
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: [syzbot] KMSAN: uninit-value in asix_mdio_read (2)
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [syzbot] KMSAN: uninit-value in asix_mdio_read (2)
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: FWD: Holtek mouse stopped working after kernel upgrade from 5.15.7 to 5.15.8
- From: "Tomasz C." <tlinux@xxxxxxxxxxxxx>
- Re: [PATCH] usb: fixing some clang warnings inside usb host drivers
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [GIT PULL] USB fixes for 5.16-rc6
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [syzbot] KMSAN: uninit-value in asix_mdio_read (2)
- From: syzbot <syzbot+f44badb06036334e867a@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: fixing some clang warnings inside usb host drivers
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH v2 4/4] usb: mtu3: set interval of FS intr and isoc endpoint
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 3/4] usb: mtu3: fix list_head check warning
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 2/4] usb: mtu3: add memory barrier before set GPD's HWO
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 1/4] usb: mtu3: fix interval value for intr and isoc
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH] usb: fixing some clang warnings inside usb host drivers
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS c4d936efa46d8ea183df16c0f3fa4423327da51d
- From: kernel test robot <lkp@xxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS f2b42379c57682d4b127283da109fa1a3317966a
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH] usb: fixing some clang warnings inside usb host drivers
- From: Julio Faracco <jcfaracco@xxxxxxxxx>
- [PATCH v2] usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
- From: Vincent Pelletier <plr.vincent@xxxxxxxxx>
- Re: [PATCH] usb: typec: ucsi: Only check the contract if there is a connection
- From: Chris Hixon <linux-kernel-bugs@xxxxxxxxxxxxx>
- Re: [PATCH] usb: typec: ucsi: Only check the contract if there is a connection
- From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/4] acpi: Store the known device locations
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
- From: conor dooley <mail@xxxxxxxxxxx>
- Re: [PATCH v4 3/6] ARM: dts: NSP: Rename SATA unit name
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
- From: <Conor.Dooley@xxxxxxxxxxxxx>
- Re: [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree
- From: <Conor.Dooley@xxxxxxxxxxxxx>
- Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
- From: <Conor.Dooley@xxxxxxxxxxxxx>
- Re: earlyprintk=xdbc seems broken
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: typec: ucsi: Only check the contract if there is a connection
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [PATCH v4 6/6] dt-bindings: usb: Convert BDC to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [PATCH v4 5/6] dt-bindings: bus: Convert GISB arbiter to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 4/6] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: usb: document snps,dis_split_quirk property in dwc3
- From: Yaqin Pan <akingchen@xxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: usb: document snps,dis_split_quirk property in dwc3
- From: Yaqin Pan <akingchen@xxxxxxxx>
- [PATCH 4.19 0/6] fix warning and errors on arm built with clang
- From: Anders Roxell <anders.roxell@xxxxxxxxxx>
- [PATCH 4.19 6/6] Input: touchscreen - avoid bitwise vs logical OR warning
- From: Anders Roxell <anders.roxell@xxxxxxxxxx>
- [PATCH 4.19 5/6] ARM: 8788/1: ftrace: remove old mcount support
- From: Anders Roxell <anders.roxell@xxxxxxxxxx>
- [PATCH 4.19 4/6] ARM: 8800/1: use choice for kernel unwinders
- From: Anders Roxell <anders.roxell@xxxxxxxxxx>
- [PATCH 4.19 3/6] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO
- From: Anders Roxell <anders.roxell@xxxxxxxxxx>
- [PATCH 4.19 2/6] ARM: 8805/2: remove unneeded naked function usage
- From: Anders Roxell <anders.roxell@xxxxxxxxxx>
- [PATCH 4.19 1/6] net: lan78xx: Avoid unnecessary self assignment
- From: Anders Roxell <anders.roxell@xxxxxxxxxx>
- Re: [PATCH] usb: typec: ucsi: Only check the contract if there is a connection
- From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
- Re: [PATCH v2 09/17] dt-bindings: gpio: add bindings for microchip mpfs gpio
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 05/17] dt-bindings: i2c: add bindings for microchip mpfs i2c
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 07/17] dt-bindings: rtc: add bindings for microchip mpfs rtc
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 11/17] dt-bindings: usb: add bindings for microchip mpfs musb
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 0/4] acpi: Store _PLD information and convert users
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] usb: typec: ucsi: Only check the contract if there is a connection
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: earlyprintk=xdbc seems broken
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2 13/17] riscv: dts: microchip: use hart and clk defines for icicle kit
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2 04/17] mailbox: change mailbox-mpfs compatible string
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v3 4/4] usb: Remove usb_for_each_port()
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v3 3/4] usb: typec: port-mapper: Convert to the component framework
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 2/4] usb: Link the ports to the connectors they are attached to
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 1/4] acpi: Store the known device locations
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v3 0/4] acpi: Store _PLD information and convert users
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_reset.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
- From: <Conor.Dooley@xxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_reset.
- From: Vincent Pelletier <plr.vincent@xxxxxxxxx>
- Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: gadget: udc: pxa25x: propagate errors from platform_get_irq()
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: earlyprintk=xdbc seems broken
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: dwc3-qcom: Fix registration when tx-fifo-resize exists
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: gadget: udc: pxa25x: propagate errors from platform_get_irq()
- From: Daniel Mack <daniel@xxxxxxxxxx>
- Re: [PATCH v2] usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH v2 0/7] DT bindings for Hikey960/970 USB/PCI
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- [PATCH v2 3/7] dt-bindings: usb: hisilicon,hi3670-dwc3: add binding for Kirin970
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [PATCH] usb: dwc3: dwc3-qcom: Fix registration when tx-fifo-resize exists
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: ftdi-elan: fix memory leak on device disconnect
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_reset.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 00/17] Update the Icicle Kit device tree
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: xhci: skip re-check pending port event if hibernated
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [GIT PULL] USB-serial fixes for 5.16-rc6
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 16/17] riscv: dts: microchip: update peripherals in icicle kit device tree
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 13/17] riscv: dts: microchip: use hart and clk defines for icicle kit
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 11/17] dt-bindings: usb: add bindings for microchip mpfs musb
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 08/17] dt-bindings: soc/microchip: add bindings for mpfs system services
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 09/17] dt-bindings: gpio: add bindings for microchip mpfs gpio
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 07/17] dt-bindings: rtc: add bindings for microchip mpfs rtc
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 05/17] dt-bindings: i2c: add bindings for microchip mpfs i2c
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 04/17] mailbox: change mailbox-mpfs compatible string
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 03/17] dt-bindings: soc/microchip: make systemcontroller a mfd
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 01/17] dt-bindings: interrupt-controller: create a header for RISC-V interrupts
- From: <conor.dooley@xxxxxxxxxxxxx>
- [PATCH v2 00/17] Update the Icicle Kit device tree
- From: <conor.dooley@xxxxxxxxxxxxx>
- [GIT PULL] USB-serial fixes for 5.16-rc6
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: FWD: Holtek mouse stopped working after kernel upgrade from 5.15.7 to 5.15.8
- From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
- Re: FWD: Holtek mouse stopped working after kernel upgrade from 5.15.7 to 5.15.8
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: FWD: Holtek mouse stopped working after kernel upgrade from 5.15.7 to 5.15.8
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: ftdi-elan: fix memory leak on device disconnect
- From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
- Re: FWD: Holtek mouse stopped working after kernel upgrade from 5.15.7 to 5.15.8
- From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
- Re: FWD: Holtek mouse stopped working after kernel upgrade from 5.15.7 to 5.15.8
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: xen-hcd: unlock on error paths
- From: Juergen Gross <jgross@xxxxxxxx>
- [PATCH v4] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
- From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
- [PATCH] usb: xen-hcd: unlock on error paths
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- FWD: Holtek mouse stopped working after kernel upgrade from 5.15.7 to 5.15.8
- From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
- [PATCH v3] extcon: fix extcon_get_extcon_dev() error handling
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH v4 6/6] dt-bindings: usb: Convert BDC to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v4 5/6] dt-bindings: bus: Convert GISB arbiter to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v4 4/6] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v4 3/6] ARM: dts: NSP: Rename SATA unit name
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v4 2/6] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v4 1/6] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v4 0/6] Broadcom DT bindings updates to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 7/7] thunderbolt: Add kernel param for CLx disabling
- From: Gil Fine <gil.fine@xxxxxxxxx>
- [PATCH v2 6/7] thunderbolt: Enable CL0s for Titan Ridge device
- From: Gil Fine <gil.fine@xxxxxxxxx>
- [PATCH v2 5/7] thunderbolt: Rename Intel VSC capability
- From: Gil Fine <gil.fine@xxxxxxxxx>
- [PATCH v2 4/7] thunderbolt: Enable TMU for Titan Ridge device
- From: Gil Fine <gil.fine@xxxxxxxxx>
- [PATCH v2 3/7] thunderbolt: Move usb4_switch_wait_for_bit() to switch.c
- From: Gil Fine <gil.fine@xxxxxxxxx>
- [PATCH v2 1/7] thunderbolt: Add TMU unidirectional mode
- From: Gil Fine <gil.fine@xxxxxxxxx>
- [PATCH v2 2/7] thunderbolt: Add CL0s support for USB4
- From: Gil Fine <gil.fine@xxxxxxxxx>
- [PATCH v2 0/7] thunderbolt: CLx support for USB4 and Titan Ridge
- From: Gil Fine <gil.fine@xxxxxxxxx>
- Re: [PATCH v2] extcon: fix extcon_get_extcon_dev() error handling
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH v17 7/7] usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- Re: [PATCH v17 7/7] usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: qcom,dwc3: add binding for SM8450
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 0/5] tools/usbip: Patch set summary
- From: Lars Gunnarsson <gunnarsson.lars@xxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: usb: document snps,dis_split_quirk property in dwc3
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH RESEND 3/7] dt-bindings: usb: hisilicon,hi3670-dwc3: add binding for Kirin970
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: usb: chipidea: Convert to json-schema
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] usb: ohci-spear: Remove direct access to platform_device resource list
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: ohci-s3c2410: Use platform_get_irq() to get the interrupt
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: uhci: Use platform_get_irq() to get the interrupt
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] extcon: fix extcon_get_extcon_dev() error handling
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: usb: document snps,dis_split_quirk property in dwc3
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH] usb: chipidea: Set the DT node on the child device
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- [PATCH v3 1/1] usb: dwc3: drd: Add support for usb-conn-gpio based usb-role-switch
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- [Bug 215117] ucsi_acpi: kernel NULL pointer dereference
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [usb:usb-linus] BUILD SUCCESS ca4d8344a72b91fb9d4c8bfbc22204b4c09c5d8f
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS f59f93cd1d720809466c7fd5aa16a236156c672b
- From: kernel test robot <lkp@xxxxxxxxx>
- [Bug 215117] ucsi_acpi: kernel NULL pointer dereference
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [Bug 215117] New: ucsi_acpi: kernel NULL pointer dereference
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [Bug 215117] ucsi_acpi: kernel NULL pointer dereference
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
- [PATCH] dt-bindings: usb: qcom,dwc3: add binding for SM8450
- From: Vinod Koul <vkoul@xxxxxxxxxx>
- [Bug 215117] ucsi_acpi: kernel NULL pointer dereference
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
- Re: [PATCH 3/3] usb: dwc2: drd: restore role and overrides upon resume
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 2/3] usb: dwc2: drd: add role-switch-default-node support
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 1/1] usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 1/1] usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [RFC]How else could a malicious device sabotage endpoints for usbnet
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: usb: dwc2: USB on Agilex platform broken after commit 50fb0c128b6e
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- [Bug 215117] ucsi_acpi: kernel NULL pointer dereference
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [Bug 215117] New: ucsi_acpi: kernel NULL pointer dereference
- From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
- Re: [PATCH v2] extcon: fix extcon_get_extcon_dev() error handling
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/3] usb: mtu3: fix interval value for intr and isoc
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: mtu3: fix list_head check warning
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 2/3] usb: mtu3: add memory barrier before set GPD's HWO
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: usb: document snps,dis_split_quirk property in dwc3
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH v2] extcon: fix extcon_get_extcon_dev() error handling
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH v2] extcon: fix extcon_get_extcon_dev() error handling
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2] extcon: fix extcon_get_extcon_dev() error handling
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH v2] extcon: fix extcon_get_extcon_dev() error handling
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] usb: ohci-s3c2410: Use platform_get_irq() to get the interrupt
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: remove typo from XEN PVUSB DRIVER section
- From: Juergen Gross <jgross@xxxxxxxx>
- [PATCH] MAINTAINERS: remove typo from XEN PVUSB DRIVER section
- From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
- Re: [PATCH v2] extcon: fix extcon_get_extcon_dev() error handling
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH] usb: xhci: Extend support for runtime power management for AMD's Yellow carp.
- From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
- Re: [PATCH 1/4] usb: gadget: udc: bcm63xx: propagate errors from platform_get_irq()
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH v2] usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
- From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
- [PATCH 2/2] usb: musb: Set the DT node on the child device
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 1/2] usb: musb: Drop unneeded resource copying
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 0/2] usb: musb resource clean-ups
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] usb: chipidea: Set the DT node on the child device
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] usb: ohci-spear: Remove direct access to platform_device resource list
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] usb: ohci-s3c2410: Use platform_get_irq() to get the interrupt
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] usb: uhci: Use platform_get_irq() to get the interrupt
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: remove duplicate include
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: xhci: Extend support for runtime power management for AMD's Yellow carp.
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: (subset) [PATCH 00/10] dt-binding patches for sm6350
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- Re: [PATCH 06/10] dt-bindings: usb: qcom,dwc3: Add SM6350 compatible
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 3/4] dt-bindings: usb: tegra-xusb: Convert to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: usb: tegra: Convert to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: usb: chipidea: Convert to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: atmel: Revert regression in USB Gadget (atmel_usba_udc)
- From: Marcelo Roberto Jimenez <marcelo.jimenez@xxxxxxxxx>
- Re: [PATCH v2] usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC]How else could a malicious device sabotage endpoints for usbnet
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] acpi: Store the Physical Location of Device (_PLD) information
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [RFC]How else could a malicious device sabotage endpoints for usbnet
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [usb-storage] Re: [PATCH] usb: storage: do not use UAS with Logitec LGB-4BNHUC
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [syzbot] INFO: task hung in r871xu_dev_remove
- From: syzbot <syzbot+f39c1dad0b7db49ca4a8@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] acpi: Store the Physical Location of Device (_PLD) information
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: atmel: Revert regression in USB Gadget (atmel_usba_udc)
- From: <Cristian.Birsan@xxxxxxxxxxxxx>
- [PATCH 2/2] dt-bindings: usb: document snps,dis_split_quirk property in dwc3
- From: Yaqin Pan <akingchen@xxxxxxxx>
- [PATCH 1/2] usb: dwc3: Add a quirk to set GUCTL.SPRSCTRLTRANSEN bit.
- From: Yaqin Pan <akingchen@xxxxxxxx>
- [PATCH 0/2] usb: dwc3: Add a quirk to set GUCTL.SPRSCTRLTRANSEN bit
- From: Yaqin Pan <akingchen@xxxxxxxx>
- Re: [PATCH V2 6/8] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector
- From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
- Re: [PATCH V2 4/8] usb: dwc3: drd: Register the eud connector child node for dwc3
- From: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
- [PATCH v2] usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
- From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] acpi: Store the Physical Location of Device (_PLD) information
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH] usb: storage: do not use UAS with Logitec LGB-4BNHUC
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH v2 0/5] acpi: Store _PLD information and convert users
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH] thunderbolt: check the return value of kmemdup()
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_reset.
- From: Vincent Pelletier <plr.vincent@xxxxxxxxx>
- [PATCH] usb: xhci: Extend support for runtime power management for AMD's Yellow carp.
- From: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@xxxxxxx>
- [PATCH] xhci: use max() to make code cleaner
- [PATCH RESEND 0/7] DT bindings for Hikey960/970 USB/PCI
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- [PATCH RESEND 3/7] dt-bindings: usb: hisilicon,hi3670-dwc3: add binding for Kirin970
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- Re: [PATCH -next] usb: host: xen-hcd: add missing unlock in error path
- From: Juergen Gross <jgross@xxxxxxxx>
- Re: [PATCH v2] arm64: qcom: sc7280: Move USB2 controller nodes from common dtsi to SKU1
- From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
- [PATCH -next] usb: host: xen-hcd: add missing unlock in error path
- From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
- Re: [PATCH] usb: xhci: skip re-check pending port event if hibernated
- From: Jun Li <lijun.kernel@xxxxxxxxx>
- [PATCH] usb: gadget: remove duplicate include
- Re: [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- [PATCH] usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_reset.
- From: Vincent Pelletier <plr.vincent@xxxxxxxxx>
- Re: [PATCH v2 0/5] acpi: Store _PLD information and convert users
- From: Prashant Malani <pmalani@xxxxxxxxxxxx>
- Re: [PATCH v6 0/5] tools/usbip: Patch set summary
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- [PATCH] net: usb: lan78xx: add Allied Telesis AT29M2-AF
- From: Greg Jesionowski <jesionowskigreg@xxxxxxxxx>
- Re: [PATCH 4/4] usb: host: ohci-omap: propagate errors from platform_get_irq()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/4] usb: host: ehci-sh: propagate errors from platform_get_irq()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 4/4] usb: host: ohci-omap: propagate errors from platform_get_irq()
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH 3/4] usb: host: ehci-sh: propagate errors from platform_get_irq()
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH 2/4] usb: gadget: udc: pxa25x: propagate errors from platform_get_irq()
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH 1/4] usb: gadget: udc: bcm63xx: propagate errors from platform_get_irq()
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH 0/4] Propagate errors from platform_get_irq() in the USB drivers
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH v3 15/15] dt-bindings: usb: Convert BDC to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 14/15] dt-bindings: bus: Convert GISB arbiter to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] USB: gadget: bRequestType is a bitfield, not a enum
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 11/15] dt-bindings: thermal: Convert Broadcom TMON to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 10/15] dt-bindings: rng: Convert iProc RNG200 to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 09/15] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 07/15] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 06/15] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 04/15] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 03/15] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: usb: dwc2: USB on Agilex platform broken after commit 50fb0c128b6e
- From: Dinh Nguyen <dinh.linux@xxxxxxxxx>
- Re: usb: dwc2: USB on Agilex platform broken after commit 50fb0c128b6e
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- Re: usb: dwc2: USB on Agilex platform broken after commit 50fb0c128b6e
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- [RFT PATCH] xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] Enable trust tx length quirk for Fresco FL11 USB controller
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
- From: Amelie DELAUNAY <amelie.delaunay@xxxxxxxxxxx>
- Re: [PATCH v2] usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: Unhandled prefetch abort when probing USB flash drive
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: xhci: skip re-check pending port event if hibernated
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] USB: serial: option: add Telit FN990 compositions
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] usb: xhci: skip re-check pending port event if hibernated
- From: Jun Li <lijun.kernel@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: add sprs_ctrl_trans_quirk
- From: Yaqin Pan <akingchen@xxxxxxxx>
- Re: [PATCH 1/1] usb: dwc2: platform: adopt dev_err_probe() to silent probe defer
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 1/1] usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH 1/1] usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: usb: dwc2: USB on Agilex platform broken after commit 50fb0c128b6e
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH] usb: hub: Resume hubs to find newly connected device
- From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
- Unhandled prefetch abort when probing USB flash drive
- From: Joshua Scott <Joshua.Scott@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- Re: [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
- From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS 99ea221f2e2f2743314e348b25c1e2574b467528
- From: kernel test robot <lkp@xxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS cdf8e2de16c01b2b44fc544a3b5de74d8092b517
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 2/4] usb: aspeed-vhub: fix remote wakeup failure in iKVM use case
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)
- From: Jimmy Wang <wangjm221@xxxxxxxxx>
- [usb:usb-next] BUILD SUCCESS c45479ecd0c21705ab078ceaba097bbb730a0541
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: usb: dwc3-xilinx: Convert USB DWC3 bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: usb: document role-switch-default-mode property in dwc2
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: usb: dwc2: USB on Agilex platform broken after commit 50fb0c128b6e
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- Re: [PATCH V2 4/8] usb: dwc3: drd: Register the eud connector child node for dwc3
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH V2 6/8] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] usb: storage: do not use UAS with Logitec LGB-4BNHUC
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH v4 2/2] usb: misc: ehset: Rework test mode entry
- From: Razvan Heghedus <heghedus.razvan@xxxxxxxxx>
- [PATCH v4 1/2] usb: core: Export usb_device_match_id
- From: Razvan Heghedus <heghedus.razvan@xxxxxxxxx>
- [PATCH] usb: core: Export usb_device_match_id
- From: Razvan Heghedus <heghedus.razvan@xxxxxxxxx>
- [PATCH v3] usb: misc: ehset: Rework test mode entry
- From: Razvan Heghedus <heghedus.razvan@xxxxxxxxx>
- Re: usb: dwc2: USB on Agilex platform broken after commit 50fb0c128b6e
- From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
- Re: [PATCH V2] usb: typec: tcpm: fix tcpm unregister port but leave a pending timer
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 1/6] usb: gadget: udc: gr: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Fwd: [PATCH] usb: gadget: atmel: Revert regression in USB Gadget (atmel_usba_udc)
- From: Marcelo Roberto Jimenez <marcelo.jimenez@xxxxxxxxx>
- RE: [PATCH] usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- Re: [PATCH] usb: hub: avoid warm port reset during USB3 disconnect
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] usb: mtu3: fix interval value for intr and isoc
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: mtu3: fix list_head check warning
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] usb: mtu3: add memory barrier before set GPD's HWO
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/6] usb: gadget: udc: gr: fix deferred probing
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] thunderbolt: check the return value of kmemdup()
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH v6] usb: f_fs: Fix use-after-free for epfile
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/4] usb: aspeed-vhub: fix remote wakeup failure in iKVM use case
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 2/3] usb: Introduce Xen pvUSB frontend (xen hcd)
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] usb: host: xhci-plat: Set XHCI_SKIP_PHY_INIT quirk for DWC3 controller
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: usb: dwc2: Detecting cable disconnection in OTG mode?
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- Re: [PATCH] usb: cdnsp: Fix incorrect status for control request
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH v5 0/3] usb: meson: fix shared reset control use
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- Re: [PATCH] usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- RE: [PATCH] usb: cdnsp: Fix incorrect status for control request
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- Re: [PATCH] usb: cdnsp: Fix issue in cdnsp_log_ep trace event
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH] usb: cdnsp: Fix incorrect calling of cdnsp_died function
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- Re: [PATCH] usb: cdnsp: Fix incorrect status for control request
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- [PATCH] usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- [syzbot] KASAN: use-after-free Read in cdc_ncm_tx_fixup
- From: syzbot <syzbot+5ec3d1378e31c88d87f4@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 0/5] acpi: Store _PLD information and convert users
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: usb: dwc2: Detecting cable disconnection in OTG mode?
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- [PATCH v2 4/5] usb: typec: port-mapper: Convert to the component framework
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 5/5] usb: Remove usb_for_each_port()
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 3/5] usb: Link the ports to the connectors they are attached to
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 1/5] acpi: Store the Physical Location of Device (_PLD) information
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 2/5] usb: Use the cached ACPI _PLD entry
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH v2 0/5] acpi: Store _PLD information and convert users
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: gadget: atmel: Revert regression in USB Gadget (atmel_usba_udc)
- From: Jonas Bonn <jonas@xxxxxxxxxxx>
- Re: usb: dwc2: USB on Agilex platform broken after commit 50fb0c128b6e
- From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
- Re: [PATCH v5 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH V2] usb: typec: tcpm: fix tcpm unregister port but leave a pending timer
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] thunderbolt: check the return value of kmemdup()
- From: Xiaoke Wang <xkernel.wang@xxxxxxxxxxx>
- [PATCH 06/10] dt-bindings: usb: qcom,dwc3: Add SM6350 compatible
- From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
- [PATCH 00/10] dt-binding patches for sm6350
- From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
- Re: [PATCH] thunderbolt: check the return value of kmemdup()
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] thunderbolt: check the return value of kmemdup()
- From: "Xiaoke Wang" <xkernel.wang@xxxxxxxxxxx>
- Re: Discrete Thunderbold Controller 8086:1137 throws DMAR and thunderbolt fails to work
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] thunderbolt: check the return value of kmemdup()
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Discrete Thunderbold Controller 8086:1137 throws DMAR and thunderbolt fails to work
- From: Chris Chiu <chris.chiu@xxxxxxxxxxxxx>
- [PATCH] usb: cdnsp: Fix issue in cdnsp_log_ep trace event
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- Re: [PATCH v3 1/5] Docs: usb: update usb_bulk_msg receiving example
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS ca5737396927afd4d57b133fd2874bbcf3421cdb
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v5 7/7] usb: gadget: uvc: add format/frame handling code
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- [PATCH] thunderbolt: check the return value of kmemdup()
- From: xkernel <xkernel.wang@xxxxxxxxxxx>
- Re: [PATCH v5 3/3] phy: amlogic: meson8b-usb2: fix shared reset control use
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH v5 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH v5 2/3] phy: amlogic: meson8b-usb2: Use dev_err_probe()
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- [PATCH v5 3/3] phy: amlogic: meson8b-usb2: fix shared reset control use
- From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
- [PATCH v5 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
- From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
- [PATCH v5 2/3] phy: amlogic: meson8b-usb2: Use dev_err_probe()
- From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
- [PATCH v5 0/3] usb: meson: fix shared reset control use
- From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
- Re: [GIT PULL] USB fixes for 5.16-rc5
- From: pr-tracker-bot@xxxxxxxxxx
- Re: ODROID-C1/-C2 USB Detection only triggered by some devices dwc2
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- [GIT PULL] USB fixes for 5.16-rc5
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: usb: dwc2: Detecting cable disconnection in OTG mode?
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- [PATCH] usb: storage: do not use UAS with Logitec LGB-4BNHUC
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH] usb: gadget: atmel: Revert regression in USB Gadget (atmel_usba_udc)
- From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/5] Docs: usb: update comment and code near decrement our usage count for the device
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [PATCH] usb: gadget: atmel: Revert regression in USB Gadget (atmel_usba_udc)
- From: Marcelo Roberto Jimenez <marcelo.jimenez@xxxxxxxxx>
- Re: proposal to delete the skeleton driver
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [Bug 214875] USB 3.1 device cannot be detected
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: usb: dwc2: Detecting cable disconnection in OTG mode?
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- usb: dwc2: Detecting cable disconnection in OTG mode?
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- Re: [PATCH 1/1] net: usb: qmi_wwan: add Telit 0x1070 composition
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- [syzbot] WARNING in dvb_media_device_free
- From: syzbot <syzbot+353b9bb3bcc881d85a46@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS 7faac1953ed1f658f719cdf7bb7303fa5eef822c
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: add sprs_ctrl_trans_quirk
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: usb-connector: Add support for Type-C alternate-modes
- From: Prashant Malani <pmalani@xxxxxxxxxxxxxxxx>
- [PATCH v3 5/6] usb: host: ohci-nxp: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3 6/6] usb: musb: core: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3 1/6] usb: gadget: udc: gr: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3 3/6] usb: host: ehci-orion: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3 2/6] usb: host: ehci-atmel: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3 4/6] usb: host: ohci-da8xx: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v3 0/6] Fix deferred probing in the USB host/gadget drivers
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH 01/10] usb: gadget: udc: bcm63xx: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH] usb: hub: avoid warm port reset during USB3 disconnect
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v18 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxxxxxx>
- [PATCH v18 4/5] usb: core: hcd: Create platform devices for onboard hubs in probe()
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxxxxxx>
- [PATCH v18 3/5] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxxxxxx>
- [PATCH v18 2/5] driver core: Export device_is_bound()
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxxxxxx>
- [PATCH v18 1/5] of/platform: Add stubs for of_platform_device_create/destroy()
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxxxxxx>
- [PATCH v18 0/5] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxxxxxx>
- Re: [PATCH v17 1/7] usb: misc: Add onboard_usb_hub driver
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] usb: core: enable remote wakeup function for usb controller
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: hub: Resume hubs to find newly connected device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: core: config: fix validation of wMaxPacketValue entries
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] usb: core: config: using bit mask instead of individual bits
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] usb: core: config: fix validation of wMaxPacketValue entries
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH] usb: hub: make wait_for_connected() take an int instead of a pointer to int
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 2/2] xhci: avoid race between disable slot command and host runtime suspend
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 1/2] xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- [PATCH 0/2] xhci fixes for usb-linus
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: hub: avoid warm port reset during USB3 disconnect
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: xhci: skip re-check pending port event if hibernated
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: hub: avoid warm port reset during USB3 disconnect
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: cdnsp: Fix incorrect calling of cdnsp_died function
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- [PATCH] usb: hub: avoid warm port reset during USB3 disconnect
- From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] net: usb: qmi_wwan: add Telit 0x1070 composition
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/1] USB: serial: option: add Telit FN990 compositions
- From: Daniele Palmas <dnlplm@xxxxxxxxx>
- [PATCH 1/1] net: usb: qmi_wwan: add Telit 0x1070 composition
- From: Daniele Palmas <dnlplm@xxxxxxxxx>
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
- [usb:usb-linus] BUILD SUCCESS 6a97cee39d8f2ed4d6e35a09a302dae1d566db36
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 2/2] usb: core: enable remote wakeup function for usb controller
- From: zhuyinbo <zhuyinbo@xxxxxxxxxxx>
- Re: [PATCH 0/5] acpi: Store _PLD information and convert users
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH 2/2] usb: core: config: using bit mask instead of individual bits
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- [PATCH 1/2] usb: core: config: fix validation of wMaxPacketValue entries
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: mediatek: Add USB xHCI controller for mt8195
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH] usb: hub: Resume hubs to find newly connected device
- From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
- Re: An inquiry on supporting USB CDC ACM on Host PC as USB Host/Master
- From: Maggie Maralit <maggie.roxas@xxxxxxxxx>
- Re: [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 3/3] usb: mtu3: fix list_head check warning
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH v6 0/5] tools/usbip: Patch set summary
- From: Lars Gunnarsson <gunnarsson.lars@xxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: usb: chipidea: Convert to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 3/4] dt-bindings: usb: tegra-xusb: Convert to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: usb: tegra: Convert to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 0/5] acpi: Store _PLD information and convert users
- From: Prashant Malani <pmalani@xxxxxxxxxxxx>
- Re: [syzbot] INFO: task hung in r871xu_dev_remove
- From: Pavel Skripkin <paskripkin@xxxxxxxxx>
- Re: [PATCH 4/4] dt-bindings: usb: tegra-xudc: Document interconnects and iommus properties
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 4/4] dt-bindings: usb: tegra-xudc: Document interconnects and iommus properties
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 3/4] dt-bindings: usb: tegra-xusb: Convert to json-schema
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 2/4] dt-bindings: usb: tegra: Convert to json-schema
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 1/4] dt-bindings: usb: chipidea: Convert to json-schema
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: usb:core: possible bug in wMaxPacketSize validation in config.c?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: hub: Resume hubs to find newly connected device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC]How else could a malicious device sabotage endpoints for usbnet
- From: Greg KH <greg@xxxxxxxxx>
- [RFC]How else could a malicious device sabotage endpoints for usbnet
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: An inquiry on supporting USB CDC ACM on Host PC as USB Host/Master
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: An inquiry on supporting USB CDC ACM on Host PC as USB Host/Master
- From: Maggie Maralit <maggie.roxas@xxxxxxxxx>
- [PATCH] usb: dwc3: add sprs_ctrl_trans_quirk
- From: Yaqin Pan <akingchen@xxxxxxxx>
- Re: An inquiry on supporting USB CDC ACM on Host PC as USB Host/Master
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [syzbot] BUG: sleeping function called from invalid context in hci_cmd_sync_cancel
- From: Oliver Neukum <oneukum@xxxxxxxx>
- An inquiry on supporting USB CDC ACM on Host PC as USB Host/Master
- From: Maggie Maralit <maggie.roxas@xxxxxxxxx>
- RE: [PATCH] usb: cdnsp: Fix incorrect status for control request
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- Re: [syzbot] BUG: sleeping function called from invalid context in hci_cmd_sync_cancel
- From: Benjamin Berg <bberg@xxxxxxxxxx>
- Re: [syzbot] WARNING in usbnet_start_xmit/usb_submit_urb
- From: syzbot <syzbot+63ee658b9a100ffadbe2@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [syzbot] WARNING in usbnet_start_xmit/usb_submit_urb
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] usb: cdnsp: Fix incorrect status for control request
- From: Peter Chen <peter.chen@xxxxxxxxxx>
- [PATCH V2] usb: typec: tcpm: fix tcpm unregister port but leave a pending timer
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v3] usb: typec: clear usb_pd flag if change to typec only mode
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: Discrete Thunderbold Controller 8086:1137 throws DMAR and thunderbolt fails to work
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [syzbot] BUG: sleeping function called from invalid context in hci_cmd_sync_cancel
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 0/5] acpi: Store _PLD information and convert users
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Discrete Thunderbold Controller 8086:1137 throws DMAR and thunderbolt fails to work
- From: Chris Chiu <chris.chiu@xxxxxxxxxxxxx>
- Re: [PATCH v2 00/10] Fix deferred probing in the USB host/gadget drivers
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH 3/3] usb: mtu3: fix list_head check warning
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: usb:core: possible bug in wMaxPacketSize validation in config.c?
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- [PATCH v5 6/7] usb: gadget: uvc: add VIDIOC function
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v5 2/7] media: uvcvideo: move uvc_format_desc to common header
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v5 4/7] usb: gadget: uvc: move structs to common header
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v5 0/7] usb: gadget: uvc: use configfs entries for negotiation and v4l2 VIDIOCS
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v5 7/7] usb: gadget: uvc: add format/frame handling code
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v5 5/7] usb: gadget: uvc: track frames in format entries
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v5 1/7] media: v4l: move helper functions for fractions from uvc to v4l2-common
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v5 3/7] usb: gadget: uvc: prevent index variables to start from 0
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- Re: usb:core: possible bug in wMaxPacketSize validation in config.c?
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- usb:core: possible bug in wMaxPacketSize validation in config.c?
- From: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
- [PATCH] usb: xhci: skip re-check pending port event if hibernated
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- Re: [PATCH] xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
- From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
- [syzbot] INFO: task hung in r871xu_dev_remove
- From: syzbot <syzbot+f39c1dad0b7db49ca4a8@xxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: core: hcd: change sizeof(vaddr) to sizeof(unsigned long)
- From: Guo Zhengkui <guozhengkui@xxxxxxxx>
- Re: [PATCH 0/5] acpi: Store _PLD information and convert users
- From: Prashant Malani <pmalani@xxxxxxxxxxxx>
- [PATCH 3/3] usb: mtu3: fix list_head check warning
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 2/3] usb: mtu3: add memory barrier before set GPD's HWO
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH 1/3] usb: mtu3: fix interval value for intr and isoc
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- [PATCH] usb: xhci-mtk: fix list_del warning when enable list debug
- From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- RE: [PATCH v3 0/4] Refactor Aspeed USB vhub driver
- From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
- RE: [PATCH v3 2/4] usb: aspeed-vhub: fix remote wakeup failure in iKVM use case
- From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
- Re: [syzbot] BUG: sleeping function called from invalid context in hci_cmd_sync_cancel
- From: syzbot <syzbot+485cc00ea7cf41dfdbf1@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: hub: Resume hubs to find newly connected device
- From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
- Re: [PATCH v3 4/4] usb: aspeed-vhub: support test mode feature
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/4] usb: aspeed-vhub: fix remote wakeup failure in iKVM use case
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/4] usb: aspeed-vhub: add qualifier descriptor
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC]first draft of the new driver writing guide
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [Bug 215241] "usbreset" tool causes hung task on kernel 5.15.3+ with Hauppauge WinTV dualHD
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v1 2/2] usb: core: enable remote wakeup function for usb controller
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: hub: Resume hubs to find newly connected device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: core: hcd: fix bug: application of sizeof to pointer
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 09/10] usb: host: ohci-omap: fix deferred probing
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH v2 09/10] usb: host: ohci-omap: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 06/10] usb: host: ehci-sh: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 03/10] usb: gadget: udc: pxa25x: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: [PATCH] dt-bindings: usb: tegra-xudc: Document interconnects and iommus properties
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2 04/10] usb: host: ehci-atmel: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 02/10] usb: gadget: udc: gr: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 09/10] usb: host: ohci-omap: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 10/10] usb: musb: core: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 07/10] usb: host: ohci-da8xx: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 08/10] usb: host: ohci-nxp: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 05/10] usb: host: ehci-orion: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 01/10] usb: gadget: udc: bcm63xx: fix deferred probing
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- [PATCH v2 00/10] Fix deferred probing in the USB host/gadget drivers
- From: Sergey Shtylyov <s.shtylyov@xxxxxx>
- Re: proposal to delete the skeleton driver
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [RFC]first draft of the new driver writing guide
- From: Jonathan Corbet <corbet@xxxxxxx>
- [Bug 215241] "usbreset" tool causes hung task on kernel 5.15.3+ with Hauppauge WinTV dualHD
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] dt-bindings: usb: Add missing properties used in examples
- From: Rob Herring <robh@xxxxxxxxxx>
- [RFC]first draft of the new driver writing guide
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH v1 2/2] usb: core: enable remote wakeup function for usb controller
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 0/4] Refactor Aspeed USB vhub driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 02/14] dt-bindings: reset: Convert Broadcom STB reset to YAML
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- RE: [PATCH V1 1/1] usb: hub: introduce delay after usb hub mutex release
- From: "Chugh, Sanjeev" <Sanjeev_Chugh@xxxxxxxxxx>
- Re: [PATCH 4/5] usb: typec: port-mapper: Convert to the component framework
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: proposal to delete the skeleton driver
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH v1 1/1] thunderbolt: Do not dereference fwnode in struct device
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH v3 4/4] usb: aspeed-vhub: support test mode feature
- From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
- [PATCH v3 2/4] usb: aspeed-vhub: fix remote wakeup failure in iKVM use case
- From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
- [PATCH v3 3/4] usb: aspeed-vhub: fix ep0 OUT ack received wrong length issue
- From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
- [PATCH v3 0/4] Refactor Aspeed USB vhub driver
- From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
- [PATCH v3 1/4] usb: aspeed-vhub: add qualifier descriptor
- From: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH v1 1/2] HID: usbhid: enable remote wakeup function for usbhid device
- From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
- [PATCH v1 2/2] usb: core: enable remote wakeup function for usb controller
- From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
- Re: [PATCH V1 1/1] usb: hub: introduce delay after usb hub mutex release
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH V1 1/1] usb: hub: introduce delay after usb hub mutex release
- From: "Chugh, Sanjeev" <Sanjeev_Chugh@xxxxxxxxxx>
- [PATCH v3] usb: typec: clear usb_pd flag if change to typec only mode
- From: Steven Syu <stevensyu7@xxxxxxxxx>
- [PATCH] usb: hub: Resume hubs to find newly connected device
- From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
- RE: [PATCH V1 1/1] usb: hub: introduce delay after usb hub mutex release
- From: "Chugh, Sanjeev" <Sanjeev_Chugh@xxxxxxxxxx>
- Re: [PATCH V1 1/1] usb: hub: introduce delay after usb hub mutex release
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: core: hcd: fix bug: application of sizeof to pointer
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: Why no SG support for isoc
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH] usb: core: hcd: fix bug: application of sizeof to pointer
- From: Guo Zhengkui <guozhengkui@xxxxxxxx>
- Re: Why no SG support for isoc
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 12/15] ARM: dts: NSP: Rename SATA unit name
- From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 15/15] dt-bindings: usb: Convert BDC to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 14/15] dt-bindings: bus: Convert GISB arbiter to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 13/15] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 12/15] ARM: dts: NSP: Rename SATA unit name
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 11/15] dt-bindings: thermal: Convert Broadcom TMON to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 10/15] dt-bindings: rng: Convert iProc RNG200 to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 09/15] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 08/15] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 07/15] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 06/15] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 05/15] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 04/15] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 03/15] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 02/15] dt-bindings: reset: Convert Broadcom STB reset to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 01/15] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v3 00/15] Broadcom DT bindings updates to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: proposal to delete the skeleton driver
- From: "Theodore Y. Ts'o" <tytso@xxxxxxx>
- Why no SG support for isoc
- From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
- Re: [PATCH] usb: core: hcd: fix bug: application of sizeof to pointer
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: dwc3-qcom: Avoid use-after-free when USB defers or unbinds
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH] Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v1 1/1] thunderbolt: Do not dereference fwnode in struct device
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/5] usb: typec: port-mapper: Convert to the component framework
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v1 1/1] thunderbolt: Do not dereference fwnode in struct device
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH V1 1/1] usb: hub: introduce delay after usb hub mutex release
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] usb: core: hcd: fix bug: application of sizeof to pointer
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 5/5] usb: Remove usb_for_each_port()
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH 4/5] usb: typec: port-mapper: Convert to the component framework
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH 3/5] usb: Link the ports to the connectors they are attached to
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH 2/5] usb: Use the cached ACPI _PLD entry
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH 1/5] acpi: Store the Physical Location of Device (_PLD) information
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- [PATCH 0/5] acpi: Store _PLD information and convert users
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH] usb: phy: add missing put_device() call in tegra_usb_phy_parse_pmc()
- From: Dmitry Osipenko <digetx@xxxxxxxxx>
- [PATCH] usb: core: hcd: fix bug: application of sizeof to pointer
- From: Guo Zhengkui <guozhengkui@xxxxxxxx>
- [PATCH 1/1] usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
- From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
- [PATCH] dt-bindings: usb: hisilicon,hi3670-dwc3: add binding for Kirin970
- From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
- [PATCH] usb: phy: add missing put_device() call in tegra_usb_phy_parse_pmc()
- From: Qing Wang <wangqing@xxxxxxxx>
- [PATCH 1/1] usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe
- From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
- Re: [PATCH 0/6] thunderbolt: Improvements for PM and USB4 compatibility
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] thunderbolt: xdomain: Avoid potential stack OOB read
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH 1/1] usb: dwc2: platform: adopt dev_err_probe() to silent probe defer
- From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
- Re: [PATCH v4 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
- From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
- Re: BUG: iPNPstring in f_printer USB gadget is reduced by two bytes
- From: John Keeping <john@xxxxxxxxxxxx>
- Re: proposal to delete the skeleton driver
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- proposal to delete the skeleton driver
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: PATCH 0/4] usbd: typec: fusb302: Add support for specifying supported alternate-modes through devicetree/fwnodes
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: PATCH 0/4] usbd: typec: fusb302: Add support for specifying supported alternate-modes through devicetree/fwnodes
- From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/5] Docs: usb: update comment and code near decrement our usage count for the device
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH] usb: cdnsp: Fix incorrect status for control request
- From: Pawel Laszczak <pawell@xxxxxxxxxxx>
- [Bug 215117] ucsi_acpi: kernel NULL pointer dereference
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v3 1/5] Docs: usb: update usb_bulk_msg receiving example
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH] dt-bindings: usb: Add missing properties used in examples
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH] thunderbolt: xdomain: Avoid potential stack OOB read
- From: Kees Cook <keescook@xxxxxxxxxxxx>
- [PATCH v6] usb: f_fs: Fix use-after-free for epfile
- From: Udipto Goswami <quic_ugoswami@xxxxxxxxxxx>
- RE: [PATCH V1 1/1] usb: hub: introduce delay after usb hub mutex release
- From: "Chugh, Sanjeev" <Sanjeev_Chugh@xxxxxxxxxx>
- Re: [PATCH v5] usb: f_fs: Fix use-after-free for epfile
- From: Udipto Goswami <quic_ugoswami@xxxxxxxxxxx>
- Re: [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Gregory Fong <gregory.0xf0@xxxxxxxxx>
- Re: [PATCH] usb: dwc3: dwc3-qcom: Avoid use-after-free when USB defers or unbinds
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [Bug 209555] dwc2 driver stops working after sudden disconnect
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] usb: dwc3: dwc3-qcom: Avoid use-after-free when USB defers or unbinds
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: Regression: "xhci: Fix command ring pointer corruption while aborting a command" breaks USB on Intel controllers
- From: Tobias Bachmann <tobachmann@xxxxxx>
- Re: [PATCH] usb: dwc3: dwc3-qcom: Avoid use-after-free when USB defers or unbinds
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: dwc3-qcom: Avoid use-after-free when USB defers or unbinds
- From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
- Re: [PATCH] usb: dwc3: dwc3-qcom: Avoid use-after-free when USB defers or unbinds
- From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
- [PATCH] usb: dwc3: dwc3-qcom: Avoid use-after-free when USB defers or unbinds
- From: Douglas Anderson <dianders@xxxxxxxxxxxx>
- [Bug 214789] ehci-hcd.c ISR
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v4 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- [PATCH AUTOSEL 4.19 2/7] USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.4 02/10] USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 5.10 05/15] USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH v4 3/3] phy: amlogic: meson8b-usb2: fix shared reset control use
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] phy: amlogic: meson8b-usb2: Use dev_err_probe()
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- [PATCH AUTOSEL 5.15 08/24] USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [usb:usb-testing] BUILD SUCCESS d598c3c46ea69ea974f0613a651cd4ef3be0c870
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v3 5/5] Docs: usb: correct format of function names in the explanations
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [PATCH v3 4/5] Docs: usb: update explanation for device_present to disconnected
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [PATCH v3 3/5] Docs: usb: update comment and code of function skel_delete
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [PATCH v3 2/5] Docs: usb: update comment and code near decrement our usage count for the device
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [PATCH v3 1/5] Docs: usb: update usb_bulk_msg receiving example
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [PATCH v3 0/5] Docs: usb: Code and text updates from usb-skeleton
- From: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
- [Bug 215241] "usbreset" tool causes hung task on kernel 5.15.3+ with Hauppauge WinTV dualHD
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH v6 0/5] tools/usbip: Patch set summary
- From: Shuah Khan <skhan@xxxxxxxxxxxxxxxxxxx>
- [Bug 215241] "usbreset" tool causes hung task on kernel 5.15.3+ with Hauppauge WinTV dualHD
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [PATCH v2 10/14] dt-bindings: rng: Convert iProc RNG200 to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 11/14] dt-bindings: thermal: Convert Broadcom TMON to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 09/14] dt-bindings: interrupt-controller: Convert Broadcom STB L2 to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 07/14] dt-bindings: interrupt-controller: Convert BCM7120 L2 to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 05/14] dt-bindings: gpio: Convert Broadcom STB GPIO to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 08/14] dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 06/14] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 04/14] dt-bindings: rtc: Convert Broadcom STB waketimer to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 03/14] dt-bindings: pwm: Convert BCM7038 PWM binding to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 14/14] dt-bindings: usb: Convert BDC to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 13/14] dt-bindings: bus: Convert GISB arbiter to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 12/14] dt-bindings: ata: Convert Broadcom SATA to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 02/14] dt-bindings: reset: Convert Broadcom STB reset to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 01/14] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH v2 00/14] Broadcom DT bindings updates to YAML
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH] dt-bindings: usb: Add missing properties used in examples
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [Bug 215241] "usbreset" tool causes hung task on kernel 5.15.3+ with Hauppauge WinTV dualHD
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 215241] New: "usbreset" tool causes hung task on kernel 5.15.3+ with Hauppauge WinTV dualHD
- From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
- [PATCH] dt-bindings: usb: Add missing properties used in examples
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2] dt-bindings: usb: dwc3-xilinx: Convert USB DWC3 bindings
- From: Manish Narani <manish.narani@xxxxxxxxxx>
- [PATCH] dt-bindings: usb: tegra-xudc: Document interconnects and iommus properties
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH 2/3] usb: dwc2: drd: add role-switch-default-node support
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
- [PATCH 1/3] dt-bindings: usb: document role-switch-default-mode property in dwc2
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]