Re: [PATCH v6] xhci: re-initialize the HC during resume if HCE was set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15.2.2022 14.05, Puma Hsu wrote:
> On Thu, Feb 10, 2022 at 7:08 PM Mathias Nyman
> <mathias.nyman@xxxxxxxxxxxxxxx> wrote:
>>
>> On 8.2.2022 9.11, Puma Hsu wrote:
>>> On Thu, Feb 3, 2022 at 3:11 AM Mathias Nyman
>>> <mathias.nyman@xxxxxxxxxxxxxxx> wrote:
>>>>
>>>> On 29.1.2022 11.30, Puma Hsu wrote:
>>>>> When HCE(Host Controller Error) is set, it means an internal
>>>>> error condition has been detected. Software needs to re-initialize
>>>>> the HC, so add this check in xhci resume.
>>>>>
>>>>> Cc: stable@xxxxxxxxxxxxxxx
>>>>> Signed-off-by: Puma Hsu <pumahsu@xxxxxxxxxx>
>>>>> ---
>>>>> v2: Follow Sergey Shtylyov <s.shtylyov@xxxxxx>'s comment.
>>>>> v3: Add stable@xxxxxxxxxxxxxxx for stable release.
>>>>> v4: Refine the commit message.
>>>>> v5: Add a debug log. Follow Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>'s comment.
>>>>> v6: Fix the missing declaration for str.
>>>>>
>>>>>  drivers/usb/host/xhci.c | 7 +++++--
>>>>>  1 file changed, 5 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
>>>>> index dc357cabb265..6f1198068004 100644
>>>>> --- a/drivers/usb/host/xhci.c
>>>>> +++ b/drivers/usb/host/xhci.c
>>>>> @@ -1091,6 +1091,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>>>>       int                     retval = 0;
>>>>>       bool                    comp_timer_running = false;
>>>>>       bool                    pending_portevent = false;
>>>>> +     char                    str[XHCI_MSG_MAX];
>>>>>
>>>>>       if (!hcd->state)
>>>>>               return 0;
>>>>> @@ -1146,8 +1147,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>>>>>               temp = readl(&xhci->op_regs->status);
>>>>>       }
>>>>>
>>>>> -     /* If restore operation fails, re-initialize the HC during resume */
>>>>> -     if ((temp & STS_SRE) || hibernated) {
>>>>> +     /* If restore operation fails or HC error is detected, re-initialize the HC during resume */
>>>>> +     if ((temp & (STS_SRE | STS_HCE)) || hibernated) {
>>>>> +             xhci_warn(xhci, "re-initialize HC during resume, USBSTS:%s\n",
>>>>> +                       xhci_decode_usbsts(str, temp));
>>>>>
>>>>>               if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
>>>>>                               !(xhci_all_ports_seen_u0(xhci))) {
>>>>>
>>>>
>>>> Ended up modifying this patch a bit more than I first intended,
>>>> - don't print warning in hibernation case, only error.
>>>> - maybe using a lot of stack for a debug string isn't really needed.
>>>> - make sure we read the usbsts register before checking for the HCE bit.
>>>>
>>>> Does the below work for you? If yes, and you agree I'll apply it instead
>>>
>>> Hi Mathias,
>>> Yes, your patch works for me, thanks!
>>> Will you submit a new patch? or should I update to a new version?
>>> Thanks.
>>
>> I'll submit it
> 
> Hi Mathias,
> Could I know when you will submit the new patch?
> We will sync the patch to our project.
> Thank you for your effort!

Just did, thanks for the reminder.

-Mathias



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux