Hi Thinh,
Am Dienstag, 15. Februar 2022, 23:49:48 CET schrieb Thinh Nguyen:
> The CONFIG_OF maybe set, but it may not be applicable to a device. In
> such case, checking against that can cause the device fail to
> initialize. Check against the device node (device->of_node) instead.
>
> Fixes: a102f07e4edf ("usb: dwc3: drd: Add support for usb-conn-gpio based
> usb-role-switch") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
> ---
> Note: This patch should go on Greg's "usb-testing" branch as the commit it
> fixes is not in mainline yet.
>
> drivers/usb/dwc3/drd.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index 25f322e62d3f..b60b5f7b6dff 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -560,7 +560,7 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc)
> if (IS_ERR(dwc->role_sw))
> return PTR_ERR(dwc->role_sw);
>
> - if (IS_ENABLED(CONFIG_OF)) {
> + if (dwc->dev->of_node) {
> /* populate connector entry */
> int ret = devm_of_platform_populate(dwc->dev);
>
>
Looks reasonable, thanks.
Tested-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
on TQMa8MPxL using DT.
Regards,
Alexander
