Some Android x86 tablets with a Bay Trail (BYT) SoC and a Crystal Cove PMIC, which does not support charger-detection, rely on the TUSB1211 phy for charger-detection. Windows tablets with the same SoC + PMIC often use an extra chip for charger-detection like the FSA831A. But since on Android tablets the designers already need to add a TUSB1211 phy to support device/gadget mode the phy is used to do charger-detection instead. These Android x86 tablets can be identified by the unique combination of a Bay Trail SoC (already checked for by PCI-ids) + a Crystal Cove PMIC + not using the standard ACPI battery and ac drivers. Where as on Windows tablets the standard ACPI battery and ac drivers will be used on BYT boards with a Crystal Cove PMIC. Set a special kernel-internal (so not part of the dt-bindings) "linux,phy_charger_detect" property on these boards, which tells the tusb1210 driver to enable charger-detection. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/usb/dwc3/dwc3-pci.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 40a3a1b114e9..8deccf0aa5e7 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -126,6 +126,14 @@ static const struct property_entry dwc3_pci_intel_byt_properties[] = { {} }; +static const struct property_entry dwc3_pci_intel_phy_charger_detect_properties[] = { + PROPERTY_ENTRY_STRING("dr_mode", "peripheral"), + PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"), + PROPERTY_ENTRY_BOOL("linux,phy_charger_detect"), + PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), + {} +}; + static const struct property_entry dwc3_pci_mrfld_properties[] = { PROPERTY_ENTRY_STRING("dr_mode", "otg"), PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"), @@ -172,6 +180,10 @@ static const struct software_node dwc3_pci_intel_byt_swnode = { .properties = dwc3_pci_intel_byt_properties, }; +static const struct software_node dwc3_pci_intel_phy_charger_detect_swnode = { + .properties = dwc3_pci_intel_phy_charger_detect_properties, +}; + static const struct software_node dwc3_pci_intel_mrfld_swnode = { .properties = dwc3_pci_mrfld_properties, }; @@ -239,6 +251,18 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc, gpiod_put(gpio); usleep_range(10000, 11000); } + + /* + * Some Android tablets with a Crystal Cove PMIC + * (INT33FD), rely on the TUSB1211 phy for charger + * detection. These can be identified by them _not_ + * using the standard ACPI battery and ac drivers. + */ + if (acpi_dev_present("INT33FD", "1", 2) && + acpi_quirk_skip_acpi_ac_and_battery()) { + dev_info(&pdev->dev, "Using TUSB1211 phy for charger detection\n"); + swnode = &dwc3_pci_intel_phy_charger_detect_swnode; + } } } -- 2.33.1