On 2/9/22 17:15, Fabrice Gasnier wrote:
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Thanks for your patch, Reviewed-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx> Regards, Amelie
--- drivers/usb/dwc2/drd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c index 1b39c47..9b6d44d 100644 --- a/drivers/usb/dwc2/drd.c +++ b/drivers/usb/dwc2/drd.c @@ -130,8 +130,10 @@ static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role) already = dwc2_ovr_avalid(hsotg, true); } else if (role == USB_ROLE_DEVICE) { already = dwc2_ovr_bvalid(hsotg, true); - /* This clear DCTL.SFTDISCON bit */ - dwc2_hsotg_core_connect(hsotg); + if (hsotg->enabled) { + /* This clear DCTL.SFTDISCON bit */ + dwc2_hsotg_core_connect(hsotg); + } } else { if (dwc2_is_device_mode(hsotg)) { if (!dwc2_ovr_bvalid(hsotg, false))