Linux SoC

• Thread Index

• [PATCH v4 3/4] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v4 2/4] rtc: rtc-pm8xxx: Add support for pm8018 rtc
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v4 0/4] Add support for the Qualcomm PM8018 PMIC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v3 4/4] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RESEND PATCH v2 2/3] clk: mdm9615: Add support for MDM9615 Clock Controllers
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RESEND PATCH v2 3/3] dt-bindings: clock: Update bindings for MDM9615 GCC and LCC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RESEND PATCH v2 0/3] clk: Add MDM9615 Clock Controllers driver and bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RESEND PATCH v2 1/3] dt-bindings: Add MDM9615 DT bindings include files for GCC and LCC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 1/4] soc: qcom: add an EBI2 device tree bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] soc: qcom: smd: Request irqs after parsing properties
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] soc: qcom: smd: Simplify multi channel handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/4] soc: qcom: add EBI2 driver
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] soc: qcom: add EBI2 driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/4] soc: qcom: add an EBI2 device tree bindings
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 4/4] ARM: dts: add SMSC ethernet on the APQ8060 Dragonboard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/4] ARM: dts: add EBI2 to the Qualcomm MSM8660 DTSI
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/4] soc: qcom: add EBI2 driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/4] soc: qcom: add an EBI2 device tree bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/4] Qualcomm MSM8660/APQ8060 EBI2 and ethernet support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/2] Fix Qualcomm 8064/8660 interrupt flags
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 4/4] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] rtc: rtc-pm8xxx: Add support for pm8018 rtc
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8974-hammerhead: Add sdhci1 node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 2/5] ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 5/5] ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
  • From: Bhushan Shah <bshah@xxxxxxx>
• [PATCH v3 4/5] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Bhushan Shah <bshah@xxxxxxx>
• [PATCH v3 3/5] ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
  • From: Bhushan Shah <bshah@xxxxxxx>
• [PATCH v3 2/5] ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
  • From: Bhushan Shah <bshah@xxxxxxx>
• Re: [Patch v2 4/5] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [Patch v2 3/5] ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [Patch v2 2/5] ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Applied "spi: qup: Remove spi_master_put in spi_qup_remove()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: qup: Remove spi_master_put in spi_qup_remove()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• [PATCH] ARM: dts: qcom: msm8974-hammerhead: Add sdhci1 node
  • From: Bhushan Shah <bshah@xxxxxxx>
• [no subject]
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 1/4] mfd: pm8921: Add support for pm8018
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 3/4] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 0/4] Add support for the Qualcomm PM8018 PMIC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 4/4] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v3 2/4] rtc: rtc-pm8xxx: Add support for pm8018 rtc
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [Patch v2 5/5] ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
  • From: Bhushan Shah <bshah@xxxxxxx>
• [Patch v2 4/5] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Bhushan Shah <bshah@xxxxxxx>
• [Patch v2 3/5] ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
  • From: Bhushan Shah <bshah@xxxxxxx>
• [Patch v2 2/5] ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
  • From: Bhushan Shah <bshah@xxxxxxx>
• Re: [PATCH 2/3] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Bhushan Shah <bshah@xxxxxxx>
• Re: [PATCH 1/4] qcom: ipq4019: Add ipq4019 ASoC device tree changes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 3/3] ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
  • From: Bhushan Shah <bshah@xxxxxxx>
• [PATCH 2/3] ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  • From: Bhushan Shah <bshah@xxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: msm8916: Add Hexagon SMD edge
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: msm8916: Add Hexagon remoteproc node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 3/6] arm64: dts: qcom: msm8916: Make scm a reset-controller
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: msm8916: Add tcsr syscon
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 2/6] arm64: dts: qcom: msm8916: Add mba memory reserve
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 1/6] arm64: dts: qcom: msm8916: Add smsm and smp2p nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: update DT bindings with ebi2 groups
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] qcom: ipq4019: ASoC tlmm/pinctrl support
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 1/4] soc: qcom: add an EBI2 device tree bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] qcom: ipq4019: ASoC tlmm/pinctrl support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 0/4] Qualcomm IPQ4019 Audio driver addition
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/4] qcom: ipq4019: Add ASoC driver modules
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/4] qcom: ipq4019: ASoC clock driver support
  • From: njaigane@xxxxxxxxxxxxxx
• [PATCH 3/4] qcom: ipq4019: ASoC tlmm/pinctrl support
  • From: njaigane@xxxxxxxxxxxxxx
• [PATCH 1/4] qcom: ipq4019: Add ipq4019 ASoC device tree changes
  • From: njaigane@xxxxxxxxxxxxxx
• [PATCH 0/4] Qualcomm IPQ4019 Audio driver addition
  • From: njaigane@xxxxxxxxxxxxxx
• [PATCH 1/4] qcom: ipq4019: Add ipq4019 ASoC device tree changes
  • From: njaigane@xxxxxxxxxxxxxx
• [PATCH 0/4] Qualcomm IPQ4019 Audio driver addition
  • From: njaigane@xxxxxxxxxxxxxx
• Re: [PATCH] pinctrl: qcom: update DT bindings with ebi2 groups
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: establish proper EBI2 pin groups
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 0/3] clk: Add MDM9615 Clock Controllers driver and bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: update DT bindings with ebi2 groups
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• [PATCH] pinctrl: qcom: update DT bindings with ebi2 groups
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: qcom: establish proper EBI2 pin groups
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: next build: 7 warnings 3 failures (next/next-20160708)
  • From: Archit Taneja <architt@xxxxxxxxxxxxxx>
• Re: next build: 7 warnings 3 failures (next/next-20160708)
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 4/4] ARM: dts: add SMSC ethernet on the APQ8060 Dragonboard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/4] ARM: dts: add EBI2 to the Qualcomm MSM8660 DTSI
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/4] soc: qcom: add EBI2 driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/4] soc: qcom: add an EBI2 device tree bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/4] soc: qcom: add EBI2 support and do ethernet
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] pinctrl: qcom: establish proper EBI2 pin groups
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] firmware: qcom_scm: make it explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] APQ8060 Dragonboard support v2
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/7] APQ8060 Dragonboard support v2
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 0/7] APQ8060 Dragonboard support v2
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: qcom: Add support for MDM9615 TLMM
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: Add MDM9615 TLMM bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/8] arm64: dts: db820c: add basic board support
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] mfd: pm8921: Add support for pm8018
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 4/5] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: Add MDM9615 TLMM bindings
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] pinctrl: qcom: Add support for MDM9615 TLMM
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 0/2] pinctrl: Add MDM9615 TLMM pinctrl driver and bindings
  • From: Ivan Ivanov <iivanov.xz@xxxxxxxxx>
• Re: [PATCH v2 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 3/5] rtc: rtc-pm8xxx: Add support for pm8018 rtc
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 4/5] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 1/5] mfd: pm8921: Add support for pm8018
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: Add MDM9615 DT bindings include files for GCC and LCC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: clock: Update bindings for MDM9615 GCC and LCC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 2/3] clk: mdm9615: Add support for MDM9615 Clock Controllers
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 0/3] clk: Add MDM9615 Clock Controllers driver and bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH v2 0/5] Add support for the Qualcomm PM8018 PMIC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: vendor-prefixes: Add Sierra Wireless
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: mdm9615: Add support for MDM9615 Clock Controllers
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2 1/8] arm64: dts: db820c: add basic board support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 4/5] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/8] arm64: dts: db820c: add basic board support
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v2] tty: serial: msm: Don't reconfigure same baud rate
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 1/8] arm64: dts: db820c: add basic board support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 4/5] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 4/5] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 3/5] rtc: rtc-pm8xxx: Add support for pm8018 rtc
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/5] mfd: pm8921: Add support for pm8018
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/8] arm64: dts: db820c: add basic board support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 15/16] arm64: dts: msm8996: add sdc2 pinctrl
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH v2 16/16] arm64: dts: msm8996: add sdc2 support
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• [PATCH v2 0/8] arm64: dts: db820c: Add basic board support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 6/8] arm64: dts: db820c: add support to LS-SPI0
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 16/16] arm64: dts: msm8996: add sdc2 support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 7/8] arm64: dts: db820c: add support to SPI on HS
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 4/8] arm64: dts: db820c: add support to LS-I2C1
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 5/8] arm64: dts: db820c: add support to I2C on HS
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 2/8] arm64: dts: db820c: add support to LS-UART0
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 3/8] arm64: dts: db820c: add support to LS-I2C0
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 1/8] arm64: dts: db820c: add basic board support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 8/8] arm64: dts: db820c: add support to external sd card.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 3/5] rtc: rtc-pm8xxx: Add support for pm8018 rtc
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/5] clk: qcom: ipq4019: Added the clock nodes and operations for pll
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] clk: qcom: ipq4019: Added the nodes for pcnoc
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] clk: qcom: ipq4019: Added the apss cpu pll divider clock node
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] clk: qcom: ipq4019: Added the cpu clock frequency change notifier
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] clk: qcom: ipq4019: Added the all frequencies for apps cpu
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] Patches for QCOM IPQ4019 clock driver
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• Re: [PATCH v2] tty: serial: msm: Don't reconfigure same baud rate
  • From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
• Re: [RFC 0/8] usb: phy: msm: various cleanups
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 1/8] arm64: dts: db820c: add basic board support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 1/3] clk: mdm9615: Add support for MDM9615 Clock Controllers
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] arm64: dts: db820c: add basic board support
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: qcom: Add MDM9615 bindings
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2] tty: serial: msm: Don't reconfigure same baud rate
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] ARM: dts: fix the MSM8660 RTC base address
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2] firmware: qcom: scm: Expose PAS command 10 as reset-controller
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 8/8] arm64: dts: db820c: add support to external sd card.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 8/8] arm64: dts: db820c: add support to external sd card.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 5/8] arm64: dts: db820c: add support to I2C on HS
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 3/8] arm64: dts: db820c: add support to LS-I2C0
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 4/8] arm64: dts: db820c: add support to LS-I2C1
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 2/8] arm64: dts: db820c: add support to LS-UART0
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 1/8] arm64: dts: db820c: add basic board support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 6/8] arm64: dts: db820c: add support to LS-SPI0
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 0/8] arm64: dts: db820c: Add basic board support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 7/8] arm64: dts: db820c: add support to SPI on HS
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: qcom: Add MDM9615 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: vendor-prefixes: Add Sierra Wireless
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: pinctrl: Add MDM9615 TLMM bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: clock: Update bindings for MDM9615 GCC and LCC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] firmware: qcom: scm: Expose PAS command 10 as reset-controller
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 7/7] ARM: dts: add Qualcomm APQ8060-based Dragonboard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/7] ARM: dts: move the fixed MMC regulator to SURF board
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/7] ARM: dts: fix the MSM8660 RTC base address
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/7] ARM: dts: add I2C block in GSBI12
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/3] ARM: dts: add Qualcomm APQ8060-based Dragonboard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/7] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/7] ARM: dts: add SDCC5 to Qualcomm MSM8660
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/7] ARM: dts: add GPIO and MPP to MSM8660 PMIC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/7] APQ8060 Dragonboard support v2
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/2] pinctrl: Add MDM9615 TLMM pinctrl driver and bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] firmware: qcom: scm: Expose PAS command 10 as reset-controller
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: Add WP8548 based MangOH Green board DTS
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] clk: mdm9615: Add support for MDM9615 Clock Controllers
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 02/16] arm64: dts: msm8996: add blsp2_uart1 pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 00/16] arm64: dts: msm8996: add more device support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 01/16] arm64: dts: msm8996: add msmgpio label
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 04/16] arm64: dts: msm8996: add support blsp2_uart2
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 05/16] arm64: dts: msm8996: add blsp1_i2c2 pinctrl nodes.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 07/16] arm64: dts: msm8996: add blsp2_i2c1 pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 06/16] arm64: dts: msm8996: add support to blsp1_i2c2 device
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 10/16] arm64: dts: msm8996: add support to blsp2_i2c0
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 09/16] arm64: dts: msm8996: add support to blsp2_i2c0 pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 11/16] arm64: dts: msm8996: add support to blsp1_spi0 pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 08/16] arm64: dts: msm8996: add support to blsp2_i2c1
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 12/16] arm64: dts: msm8996: add support to blsp1_spi0
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 14/16] arm64: dts: msm8996: add support to blsp2_spi5
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 13/16] arm64: dts: msm8996: add support to blsp2_spi5 pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 15/16] arm64: dts: msm8996: add sdhci2 pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 16/16] arm64: dts: msm8996: add sdc2 support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 15/16] arm64: dts: msm8996: add sdc2 pinctrl
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 03/16] arm64: dts: msm8996: add blsp2_uart2 pinctrl nodes.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/4] dt-bindings: arm: Add Sierra Wireless modules bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: vendor-prefixes: Add Sierra Wireless
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: Add Sierra Wireless WP8548 dtsi
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: Add WP8548 based MangOH Green board DTS
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 0/4] ARM: dts: Add support for the WP8548 and mangOH Board
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: Add MSM9615 dtsi
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: qcom: Add MDM9615 bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 0/2] ARM: dts: Add support for the MDM9615
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 1/2] ARM: qcom: Add support for MDM9615
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 2/2] ARM: configs: qualcomm: Add MDM9615 missing defconfigs
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 0/2] ARM: qcom: Add support for the MDM9615
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 0/5] Add support for the Qualcomm PM8018 PMIC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 2/5] input: pmic8xxx-pwrkey: Add support for pm8018 pwrkey
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 1/5] mfd: pm8921: Add support for pm8018
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 3/5] rtc: rtc-pm8xxx: Add support for pm8018 rtc
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 4/5] mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 1/2] pinctrl: qcom: Add support for MDM9615 TLMM
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 0/2] pinctrl: Add MDM9615 TLMM pinctrl driver and bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: pinctrl: Add MDM9615 TLMM bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 1/3] clk: mdm9615: Add support for MDM9615 Clock Controllers
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: clock: Update bindings for MDM9615 GCC and LCC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 3/3] dt-bindings: Add MDM9615 DT bindings include files for GCC and LCC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 0/3] clk: Add MDM9615 Clock Controllers driver and bindings
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2] tty: serial: msm: Don't reconfigure same baud rate
  • From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
• [PATCH v2] tty: serial: msm: Don't reconfigure same baud rate
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] tty: serial: msm_serial: Don't reset uart on set_termios
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: add Qualcomm APQ8060-based Dragonboard
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: add Qualcomm APQ8060-based Dragonboard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH] tty: serial: msm_serial: Don't reset uart on set_termios
  • From: Pramod Gurav <pramod.gurav@xxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] firmware: qcom: scm: Expose PAS command 10 as reset-controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: add Qualcomm APQ8060-based Dragonboard
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/5] ARM: dts: add SDCC5 to Qualcomm MSM8660
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: dts: add GPIO and MPP to MSM8660 PMIC
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: dts: move the fixed MMC regulator to SURF board
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] firmware: qcom: scm: Expose PAS command 10 as reset-controller
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: dts: add Qualcomm APQ8060-based Dragonboard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/5] ARM: dts: move the fixed MMC regulator to SURF board
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/5] ARM: dts: add SDCC5 to Qualcomm MSM8660
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/5] ARM: dts: add GPIO and MPP to MSM8660 PMIC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/5] APQ8060 Dragonboard support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: add Qualcomm APQ8060-based Dragonboard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RFC PATCH] tty: serial: msm_serial: Don't reset uart on set_termios
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: sd_600eval: Fix eMMC lockup issue
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 3/3] ARM: dts: add Qualcomm APQ8060-based Dragonboard
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3] ARM: dts: add SDCC5 to Qualcomm MSM8660
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] ARM: dts: add GPIO and MPP to MSM8660 PMIC
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: sd_600eval: Fix eMMC lockup issue
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] firmware: qcom: scm: Expose PAS command 10 as reset-controller
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v2 2/2] ARM: dts: sd_600eval: Fix eMMC lockup issue
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: apq8064: rename db600c to SD_600eval
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Update properties for smem state referencing
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: apq8064: rename db600c to SD_600eval
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: apq8064: rename db600c to SD_600eval
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: apq8064: move sdcc3 pinctrls out of baord file
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: apq8064: move sdcc1 pinctrl nodes to soc file
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 1/2] ARM: dts: apq8064: rename db600c to SD_600eval
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: sd_600eval: Fix eMMC lockup issue
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2] soc: qcom: Update properties for smem state referencing
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] soc: qcom: Update properties for smem state referencing
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 2/2] soc: qcom: smp2p: Drop io-accessors
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 1/2] soc: qcom: smp2p: Correct addressing of outgoing value
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 04/54] MAINTAINERS: Add file patterns for qcom device tree bindings
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH v3] tty:serial:msm:Do not restore Rx interrupts in DMA
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: fix definition of msm_stop_dma
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] tty:serial:msm:Do not restore Rx interrupts in DMA
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: fix definition of msm_stop_dma
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: fix definition of msm_stop_dma
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] tty: serial: msm: fix definition of msm_stop_dma
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH v3] tty:serial:msm:Do not restore Rx interrupts in DMA
  • From: Charanya Venkatraman <charanya@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: msm8916: Add smsm and smp2p nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] ARM: dts: msm8916: Update reserved-memory
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v4 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 1/2] dt: binding: Add Qualcomm WCNSS control binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: defconfig: enable the MSM8660 pin controller
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: Don't read off end of tx fifo
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: Don't read off end of tx fifo
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v2] tty:serial:msm:Do not restore Rx interrupts in DMA
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] tty:serial:msm:Do not restore Rx interrupts in DMA
  • From: Charanya Venkatraman <charanya@xxxxxxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: Don't read off end of tx fifo
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• [PATCH] tty: serial: msm: Don't read off end of tx fifo
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/5] clk: qcom: ipq4019: Modified the fixed clock rate to proper values
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] clk: qcom: ipq4019: Modified the fixed clock rate to proper values
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] clk: qcom: ipq4019: Modified the fixed clock rate to proper values
  • From: "Banavathi, Pradeep" <pradeepb@xxxxxxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: charanya@xxxxxxxxxxxxxx
• Re: [PATCH 1/5] clk: qcom: ipq4019: Modified the fixed clock rate to proper values
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: defconfig: enable the MSM8660 pin controller
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH] ARM: defconfig: enable the MSM8660 pin controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFT PATCH 1/2] serial: Fix console setup section mismatch
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFT PATCH 1/2] serial: Fix console setup section mismatch
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• [RFT PATCH 2/2] serial: pnx8xxx: Fix coding style
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFT PATCH 1/2] serial: Fix console setup section mismatch
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH 1/5] clk: qcom: ipq4019: Modified the fixed clock rate to proper values
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH 2/5] clk: qcom: ipq4019: Added the apss cpu pll divider clock node
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH 3/5] clk: qcom: ipq4019: Added the cpu pll divider and changed regmap limit
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH 4/5] clk: qcom: ipq4019: Added the cpu clock frequency change notifier
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH 5/5] clk: qcom: ipq4019: Added the turbo frequency for apps cpu
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• [PATCH 0/5] Patches for QCOM IPQ4019 clock driver
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt: binding: Add Qualcomm WCNSS control binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt: binding: Add Qualcomm WCNSS control binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH v3] qcom: ipq4019: add wifi nodes to ipq4019 SoC device tree
  • From: tamizhchelvam@xxxxxxxxxxxxxx
• [PATCH 04/54] MAINTAINERS: Add file patterns for qcom device tree bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 4/8] usb: phy: move TCSR driver into new file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 4/8] usb: phy: move TCSR driver into new file
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC 4/8] usb: phy: move TCSR driver into new file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 4/8] usb: phy: move TCSR driver into new file
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [RFC 0/8] usb: phy: msm: various cleanups
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• [RFC 1/8] usb: phy: move msm_hsusb.h into driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC 0/8] usb: phy: msm: various cleanups
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC 2/8] usb: ehci-msm: call usb_phy_init instead of open-coding it
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC 8/8] usb: phy: msm: disable regulator for remove()
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC 3/8] usb: chipidea: msm: remove open-coded phy init
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC 5/8] usb: phy: msm: move register definitions into driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC 7/8] usb: phy: msm: remove v1p8/v3p3 voltage setting
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC 4/8] usb: phy: move TCSR driver into new file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC 6/8] usb: phy: qcom: use bulk regulator interfaces
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: charanya@xxxxxxxxxxxxxx
• [PATCH v2 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v2 1/2] dt: binding: Add Qualcomm WCNSS control binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH] tty: serial: msm: Disable restoring Rx interrupts for DMA Mode
  • From: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] tty: serial: msm_serial regression fix data corruption
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH 1/2] tty: serial: msm_serial regression fix data corruption
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] tty: serial: msm_serial regression fix data corruption
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH 2/2] tty: serial: msm_serial add info message
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• [PATCH 1/2] tty: serial: msm_serial regression fix data corruption
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• [PATCH 0/2] tty: serial: msm_serial regression and add info message
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH v2 05/13] ARM: dts: db600c: add pmic regulator supplies
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 3/4] soc: qcom: spm: Use const and __initconst for qcom_cpuidle_ops
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH 4/4] drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Ivan Ivanov <iivanov.xz@xxxxxxxxx>
• Re: [PATCH v2] tty: msm_serial: remove static clk rate setting in probe
  • From: gpramod@xxxxxxxxxxxxxx
• Re: [PATCH 0/4] ARM: cpuidle: use const and __initconst for cpuidle_ops
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH v2 05/13] ARM: dts: db600c: add pmic regulator supplies
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] soc: qcom: spm: use const and __initconst for qcom_cpuidle_ops
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 0/4] ARM: cpuidle: use const and __initconst for cpuidle_ops
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 0/4] ARM: cpuidle: use const and __initconst for cpuidle_ops
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2] tty: msm_serial: remove static clk rate setting in probe
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• [PATCH v2 07/13] ARM: dts: db600c: add usb support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 06/13] ARM: dts: db600c: Add eMMC and SD card support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 05/13] ARM: dts: db600c: add pmic regulator supplies
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 04/13] ARM: dts: db600c: add board support with serial
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 11/13] ARM: dts: db600c: add i2c support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 10/13] ARM: dts: db600c: Add on board leds support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 13/13] ARM: dts: db600c: add support to magnetometer
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 09/13] ARM: dts: db600c: add on board sata support.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 12/13] ARM: dts: db600c: add spi support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 08/13] ARM: dts: db600c: add pcie support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 03/13] ARM: dts: apq8064: add gsbi7 i2c support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 01/13] ARM: dts: apq8064: fix the pinctrls for i2c and spi
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 02/13] ARM: dts: apq8064: add support to gsbi1 uart
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 00/13] ARM: dts: Add DB600c support.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 1/2] qcom: ipq4019: Add regulator support to DK04 device tree
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 1/2] qcom: ipq4019: Add regulator support to DK04 device tree
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] qcom: ipq4019: Add regulator support to DK04 device tree
  • From: Sreedhar Sambangi <ssambang@xxxxxxxxxxxxxx>
• [PATCH] qcom: ipq4019: Add SDHC device nodes for SOC and DK04 board.
  • From: Sreedhar Sambangi <ssambang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] qcom: ipq4019: Add regulator support to DK04 device tree
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• [PATCH 1/2] qcom: ipq4019: Add regulator support to DK04 device tree
  • From: Sreedhar Sambangi <ssambang@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] ata: ahci-platform: Add ports-implemented DT bindings.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/3] ahci: add ports-implemented dt bindings
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH v3 1/3] libahci: save port map for forced port map
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 2/3] ata: ahci-platform: Add ports-implemented DT bindings.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: apq8064: add ahci ports-implemented mask
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 0/3] ahci: add ports-implemented dt bindings
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: apq8064: add ahci ports-implemented mask
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 2/5] soc: qcom: smem: Use write-combine remap for SMEM
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/3] libahci: save port map for forced port map
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH v2 2/3] ata: ahci-platform: Add ports-implemented DT bindings.
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: apq8064: add ahci ports-implemented mask
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/3] ata: ahci-platform: Add ports-implemented DT bindings.
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH v2 0/3] ahci: add ports-implemented dt bindings.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 2/3] ata: ahci-platform: Add ports-implemented DT bindings.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 1/3] libahci: save port map for forced port map
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: apq8064: add ahci ports-implemented mask
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] libahci: save port map for forced port map
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] libahci: save port map for forced port map
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] libahci: save port map for forced port map
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] libahci: save port map for forced port map
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] ata: ahci-platform: Add ports-implemented dt bindings.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] ata: ahci-platform: Add ports-implemented dt bindings.
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 01/12] ARM: dts: apq8064: fix the pinctrls for i2c and spi
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 01/12] ARM: dts: apq8064: fix the pinctrls for i2c and spi
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 11/12] ARM: dts: dragonboard-600c: add i2c support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 00/12] ARM: dts: Add dragonboard-600c support.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 06/12] ARM: dts: dragonboard-600c: Add eMMC and SD card support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 05/12] ARM: dts: dragonboard-600c: add pmic regulator supplies
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 00/12] ARM: dts: Add dragonboard-600c support.
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 11/12] ARM: dts: dragonboard-600c: add i2c support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] ata: ahci-platform: Add ports-implemented dt bindings.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 09/12] ARM: dts: dragonboard-600c: add on board sata support.
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 08/12] ARM: dts: dragonboard-600c: add pcie support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 07/12] ARM: dts: dragonboard-600c: add usb support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 06/12] ARM: dts: dragonboard-600c: Add eMMC and SD card support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 05/12] ARM: dts: dragonboard-600c: add pmic regulator supplies
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 03/12] ARM: dts: apq8064: add gsbi7 i2c support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 02/12] ARM: dts: apq8064: add support to gsbi1 uart
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 01/12] ARM: dts: apq8064: fix the pinctrls for i2c and spi
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] ata: ahci-platform: Add ports-implemented dt bindings.
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [RFC PATCH 1/3] libahci: save port map for forced port map
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [RFC PATCH 2/3] ata: ahci-platform: Add ports-implemented dt bindings.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [RFC PATCH 0/3] ahci: add ports-implemented dt bindings.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [RFC PATCH 3/3] ARM: dts: apq8064: add ahci ports-implemented mask
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v2 5/9] ARM: dts: qcom: msm8974: Introduce the wcnss remoteproc node
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 2/5] soc: qcom: smem: Use write-combine remap for SMEM
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 5/5] ARM: dts: qcom: msm8974: Introduce pronto node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 1/5] soc: qcom: smd: Make callback pass channel reference
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2 9/9] ARM: dts: qcom: apq8064: Introduce wcnss remoteproc
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v2 8/9] ARM: dts: qcom: apq8064: Add smd node and all edges
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v2 7/9] ARM: dts: qcom: apq8064: Add complete smsm node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v2 6/9] ARM: dts: qcom: apq8064: Add syscon for sic-non-secure
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v2 5/9] ARM: dts: qcom: msm8974: Introduce the wcnss remoteproc node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v2 0/9] Qualcomm WCNSS remoteproc
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 4/4] ARM: dts: msm8974: Add modem smp2p and smd nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 2/4] ARM: dts: msm8974: Split efs in rfsa and rmtfs
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 3/4] ARM: dts: msm8974: Add node for second i2c from blsp1
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 0/4] ARM: cpuidle: use const and __initconst for cpuidle_ops
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
• Re: [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Nicolas Dechesne <nicolas.dechesne@xxxxxxxxxx>
• Re: [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 15/17] qcom: ipq4019: add cpu operating points for cpufreq support
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH 11/17] qcom: ipq4019: add support for reset via qcom,ps-hold
  • From: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
• [PATCH 12/17] qcom: ipq4019: add spi node to ipq4019 SoC and DK01 device tree
  • From: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
• [PATCH 10/17] qcom: ipq4019: add watchdog node to ipq4019 SoC and DK01 device tree
  • From: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
• [PATCH 13/17] qcom: ipq4019: add i2c node to ipq4019 SoC and DK01 device tree
  • From: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
• [PATCH 16/17] qcom: ipq4019: add crypto nodes to ipq4019 SoC and DK01 device tree
  • From: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
• [PATCH 15/17] qcom: ipq4019: add cpu operating points for cpufreq support
  • From: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
• [PATCH 17/17] qcom: ipq4019: add DMA nodes to ipq4019 SoC and DK01 device tree
  • From: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx>
• Re: [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH 02/12] ARM: dts: apq8064: add support to gsbi1 uart
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 05/12] ARM: dts: dragonboard-600c: add pmic regulator supplies
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 06/12] ARM: dts: dragonboard-600c: Add eMMC and SD card support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 09/12] ARM: dts: dragonboard-600c: add on board sata support.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 11/12] ARM: dts: dragonboard-600c: add i2c support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 12/12] ARM: dts: dragonboard-600c: add spi support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 08/12] ARM: dts: dragonboard-600c: add pcie support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 07/12] ARM: dts: dragonboard-600c: add usb support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 03/12] ARM: dts: apq8064: add gsbi7 i2c support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 01/12] ARM: dts: apq8064: fix the pinctrls for i2c and spi
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 00/12] ARM: dts: Add dragonboard-600c support.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 4/4] drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH 1/4] ARM: cpuidle: add const qualifier to cpuidle_ops member in structures
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH 3/4] soc: qcom: spm: use const and __initconst for qcom_cpuidle_ops
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH 2/4] ARM: cpuidle: constify return value of arm_cpuidle_get_ops()
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• [PATCH 0/4] ARM: cpuidle: use const and __initconst for cpuidle_ops
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v3] ARM, ARM64: dts: drop "arm, amba-bus" in favor of "simple-bus"
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v2] ARM: dts: add "simple-bus" where "arm,amba-bus" is used alone
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH v3] ARM,ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: add "simple-bus" where "arm,amba-bus" is used alone
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: add "simple-bus" where "arm,amba-bus" is used alone
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: add "simple-bus" to "arm, amba-bus" compatible nodes
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH v2] ARM: dts: add "simple-bus" where "arm,amba-bus" is used alone
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH v2] tty: msm_serial: remove static clk rate setting in probe
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: add "simple-bus" to "arm,amba-bus" compatible nodes
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: add "simple-bus" to "arm, amba-bus" compatible nodes
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [rtc-linux] Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [rtc-linux] [RFC 06/15] pinctrl: rockchip: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [rtc-linux] [RFC 07/15] pinctrl: mvebu: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [rtc-linux] [RFC 12/15] soc: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [rtc-linux] [RFC 13/15] staging: media: omap4iss: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [rtc-linux] Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [rtc-linux] Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozłowski <k.kozlowski.k@xxxxxxxxx>
• Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [rtc-linux] Re: [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [rtc-linux] Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [RFC 14/15] usb: xhci: mtk: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 10/15] net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 01/15] clocksource: atmel: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 05/15] phy: hi6220: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 03/15] hwspinlock: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 02/15] dmaengine: nxp: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] ARM: dts: add "simple-bus" to "arm, amba-bus" compatible nodes
  • From: "Jon Medhurst (Tixy)" <tixy@xxxxxxxxxx>
• [RFC 06/15] pinctrl: rockchip: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 07/15] pinctrl: mvebu: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 08/15] rtc: at91sam9: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 09/15] media: platform: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 10/15] net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 13/15] staging: media: omap4iss: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 12/15] soc: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 14/15] usb: xhci: mtk: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 11/15] power: reset: keystone: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 05/15] phy: hi6220: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 04/15] irqchip: st: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 03/15] hwspinlock: qcom: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 02/15] dmaengine: nxp: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 01/15] clocksource: atmel: Add missing MFD_SYSCON dependency on HAS_IOMEM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [RFC 00/15] tree-wide: mfd: syscon: Fix unmet ioremap dependency
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: add "simple-bus" to "arm,amba-bus" compatible nodes
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] soc: qcom: smp2p: Use memset_io to zero out new entries
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: smp2p: Use memset_io to zero out new entries
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: dts: add "simple-bus" to "arm,amba-bus" compatible nodes
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• [PATCH] ARM: dts: add "simple-bus" to "arm,amba-bus" compatible nodes
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] arm64: dts: qcom: fix usb digital voltage levels
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] arm64: dts: qcom: fix usb digital voltage levels
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: smp2p: Use memset_io to zero out new entries
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• [PATCH] soc: qcom: smp2p: Use memset_io to zero out new entries
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 6/8] arm64: dts: qcom: fix usb digital voltage levels
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 6/8] arm64: dts: qcom: fix usb digital voltage levels
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH] arm64: dts: msm8916: Move smem below hwlock
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• [PATCH v3 2/8] arm64: dts: qcom: apq8016-sbc: add usb support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 3/8] arm64: dts: qcom: add audio pinctrls
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 4/8] arm64: dts: qcom: add lpass node
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 5/8] arm64: dts: qcom: apq8016-sbc: enable lpass on DB410c
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 6/8] arm64: dts: qcom: fix usb digital voltage levels
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 7/8] arm64: dts: qcom: apq8016-sbc: enable bam dma node.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 8/8] arm64: dts: qcom: Fix MPP's function used for LED control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 1/8] arm64: dts: qcom: add manual pullup setting to otg.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 0/8] arm64: dts: apq8016 dt patches (Set2).
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 03/12] ARM: dts: apq8064: add pci support in CM QS600
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 04/12] ARM: dts: apq8064: add i2c sleep pinctrl states.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 05/12] ARM: dts: apq8064: add spi5 device node.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 06/12] ARM: dts: ifc6410: enable spi device on expansion
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 07/12] ARM: dts: apq8064: add missing i2c2 pinctrl info
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 09/12] ARM: dts: apq8064: add gsbi4 with i2c node.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 10/12] ARM: dts: ifc6410: enable cam i2c device
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 11/12] ARM: dts: apq8064: add i2c6 device node.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 12/12] ARM: dts: ifc6410: add correct aliases to the i2c and spi bus
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 02/12] ARM: dts: apq8064: move pinctrls to dedicated dtsi
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 01/12] ARM: dts: qcom: fix i2c lables to be inline with others
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH 00/12] ARM: dts: apq8064: spi and i2c dt patches
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3 0/5] Qualcomm SMD multi-channel client support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 5/5] soc: qcom: smd: Support opening additional channels
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 1/5] soc: qcom: smd: Introduce callback setter
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 3/5] soc: qcom: smd: Refactor channel open and close handling
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 2/5] soc: qcom: smd: Split discovery and state change work
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v3 4/5] soc: qcom: smd: Support multiple channels per sdev
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] soc: qcom/spm: shut up uninitialized variable warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] spi: qup: provide proper bus numbers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: qup: provide proper bus numbers
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] spi: qup: provide proper bus numbers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: qup: provide proper bus numbers
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] spi: qup: provide proper bus numbers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: qup: provide proper bus numbers
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Add support for SAW2 regulators
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] soc: qcom: Add support for SAW2 regulators
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Add support for SAW2 regulators
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• [PATCH] ARM: dts: qcom: msm8974: Add WCNSS SMP2P node
  • From: bjorn@xxxxxxx
• [PATCH] ARM: dts: qcom: msm8974: Add smsm node
  • From: bjorn@xxxxxxx
• Re: [PATCH] soc: qcom: Add support for SAW2 regulators
  • From: Lina Iyer <lina.iyer@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Add support for SAW2 regulators
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] soc: qcom: Add support for SAW2 regulators
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [PATCH 0/5] drivers/tty: make more bool drivers explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: qcom: msm8974: Add i2c8 node
  • From: Andy Gross <agross@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: qcom: select ARM_CPU_SUSPEND for power management
  • From: Andy Gross <agross@xxxxxxxxxxxxxx>
• RE: [PATCH] ARM: use "depends on" for SoC configs instead of "if" after prompt
  • From: <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: qcom: select ARM_CPU_SUSPEND for power management
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH] ARM: qcom: select ARM_CPU_SUSPEND for power management
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] ARM: dts: qcom: msm8974: Add i2c8 node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: enable smsm/smp2p modular build
  • From: Andy Gross <agross@xxxxxxxxxxxxxx>
• [PATCH v2] soc: qcom: enable smsm/smp2p modular build
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] drivers/built-in.o: In function `qcom_smp2p_intr':
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] drivers/built-in.o: In function `qcom_smp2p_intr':
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] mfd: ssbi: removing unnecessary strcmp
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] ARM: use "depends on" for SoC configs instead of "if" after prompt
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH] ARM: use "depends on" for SoC configs instead of "if" after prompt
  • From: <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] mfd: ssbi: removing unnecessary strcmp
  • From: Saurabh Sengar <saurabh.truth@xxxxxxxxx>
• Re: [PATCH] soc: qcom: smd-rpm: Correct size of outgoing message
  • From: Andy Gross <agross@xxxxxxxxxxxxxx>
• Re: [PATCH] soc: qcom: smd-rpm: Correct size of outgoing message
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH] soc: qcom: smd-rpm: Correct size of outgoing message
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] Add __ioread32_copy() and use it
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] soc: qcom: Introduce WCNSS_CTRL SMD client
  • From: Bjorn Andersson <bjorn@xxxxxxx>
• Re: [PATCH] soc: qcom: Introduce WCNSS_CTRL SMD client
  • From: yfw <fengwei.yin@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: Introduce WCNSS_CTRL SMD client
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH] soc: qcom: Introduce WCNSS_CTRL SMD client
  • From: yfw <fengwei.yin@xxxxxxxxxx>
• Re: [PATCH 0/5] drivers/tty: make more bool drivers explicitly non-modular
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] drivers/tty: make more bool drivers explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH 0/5] drivers/tty: make more bool drivers explicitly non-modular
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] drivers/tty/serial: make msm_serial.c explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] drivers/tty/serial: make msm_serial.c explicitly non-modular
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• [PATCH 4/5] drivers/tty/serial: make msm_serial.c explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• [PATCH 0/5] drivers/tty: make more bool drivers explicitly non-modular
  • From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] soc: qcom: smd: Support opening additional channels
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] soc: qcom: smd: Support opening additional channels
  • From: yfw <fengwei.yin@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  • From: Andy Gross <agross@xxxxxxxxxxxxxx>
• [PATCH] soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH] firmware: qcom-scm: build for correct architecture level
  • From: Andy Gross <agross@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: msm8974: fix typo in "disabled" property
  • From: Michael Opdenacker <michael.opdenacker@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] delete unneeded of_node_put
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 2/3] soc: qcom: smd: delete unneeded of_node_put
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PATCH] soc: qcom: smd: Correct SMEM items for upper channels
  • From: Bjorn Andersson <bjorn@xxxxxxx>
• Re: [PATCH] soc: qcom: smd: Correct SMEM items for upper channels
  • From: Andy Gross <agross@xxxxxxxxxxxxxx>
• [PATCH] firmware: qcom-scm: build for correct architecture level
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] firmware: bcm47xx_nvram: fix typo / build error
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RESEND PATCH] soc: qcom: smd: Correct SMEM items for upper channels
  • From: bjorn@xxxxxxx