I think the vdd-levels were an oversight. The voltages definitely need to be correct. As for the corner regulators, I believe the CPR driver was supposed to address this. The USB requests a specific voltage and frequency and based on this the CPR would set the corner for the regulator. Stephen, correct me if i am wrong. On 25 February 2016 at 17:44, Andy Gross <andy.gross@xxxxxxxxxx> wrote: > I think the vdd-levels were an oversight. The voltages definitely need to > be correct. As for the corner regulators, I believe the CPR driver was > supposed to address this. The USB requests a specific voltage and frequency > and based on this the CPR would set the corner for the regulator. > > Stephen, correct me if i am wrong. > > On 25 February 2016 at 05:21, Srinivas Kandagatla > <srinivas.kandagatla@xxxxxxxxxx> wrote: >> >> >> >> On 24/02/16 23:06, Stephen Boyd wrote: >>> >>> On 02/23/2016 08:50 AM, Srinivas Kandagatla wrote: >>>> >>>> This patch updates the digital voltage levels from corner values to >>>> microvolts as we are going to use s1 regulator directly for vddcx >>>> instead of s1_corner. >>>> >>>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> >>>> --- >>> >>> >>> What's the plan for corners? Maybe we should remove the voltage setting >>> from the usb driver or drop the usb node entirely on msm8916 until we >>> resolve how we're going to handle corners. I'd like to avoid getting >>> stuck into some DT binding ABI mess here. >> >> >> Andy/Bjorn, any comments on plans on corner regulators? >> >> Please note, that this is a patch to fix what is already in the mainline. >> Without this patch the regulator would be configured with 1uV or 5uV or 7uV >> which would obviously fail. >> >> THB, it does not make sense to drop feature which is functional, and I >> also agree that we should cleanup some of this mess at some point in time >> once we all the bits and pieces ready. >> >> I was surprised to see these usb bindings(qcom,vdd-levels) existed even >> before we had concept of corner regulators in mainline kernel. Which also >> suggests that this driver needs a proper relook once again. >> >> Thanks, >> srini > > -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
