Hi Andy, This patchset adds support to Dragonboard 600c which is based on APQ8064. With this patchset, except spi I was able to test all the below features on this board on top of linus master branch. 1> i2c 2> spi 3> sd/mmc with card detect 4> eMMC 5> USB 6> SATA 7> on board Ethernet based on PCIE. 8> user and activity leds. AHCI SATA is broken on APQ8064 on mainline, due to changes in libahci, fix is being discussed which should not effect this dt patches anyway. This patchset also has a fix to i2c/spi pinctrls which was not set correctly in my previous apq8064 patches, I have verified this patchset with eeprom and sensors on the board, you might want to take that patch in next rc. Thanks, srini Srinivas Kandagatla (12): ARM: dts: apq8064: fix the pinctrls for i2c and spi ARM: dts: apq8064: add support to gsbi1 uart ARM: dts: apq8064: add gsbi7 i2c support ARM: dts: dragonboard-600c: add board support with serial ARM: dts: dragonboard-600c: add pmic regulator supplies ARM: dts: dragonboard-600c: Add eMMC and SD card support ARM: dts: dragonboard-600c: add usb support ARM: dts: dragonboard-600c: add pcie support ARM: dts: dragonboard-600c: add on board sata support. ARM: dts: dragonboard-600c: Add on board leds support ARM: dts: dragonboard-600c: add i2c support ARM: dts: dragonboard-600c: add spi support arch/arm/boot/dts/Makefile | 1 + .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 377 +++++++++++++++++++++ arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 39 +++ arch/arm/boot/dts/qcom-apq8064.dtsi | 41 ++- 4 files changed, 452 insertions(+), 6 deletions(-) create mode 100644 arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
