Hi Andy, Here is a patchset for msm8996 which enables more support to serial, i2c, spi, sd card and pinctrl on msm8996. I was able to test i2c/sdcard with this patchset on a APQ8096 based board on mainline. Thanks, srini Srinivas Kandagatla (16): arm64: dts: msm8996: add msmgpio label arm64: dts: msm8996: add blsp2_uart1 pinctrl arm64: dts: msm8996: add blsp2_uart2 pinctrl nodes. arm64: dts: msm8996: add support blsp2_uart2 arm64: dts: msm8996: add blsp1_i2c2 pinctrl nodes. arm64: dts: msm8996: add support to blsp1_i2c2 device arm64: dts: msm8996: add blsp2_i2c1 pinctrl arm64: dts: msm8996: add support to blsp2_i2c1 arm64: dts: msm8996: add support to blsp2_i2c0 pinctrl arm64: dts: msm8996: add support to blsp2_i2c0 arm64: dts: msm8996: add support to blsp1_spi0 pinctrl arm64: dts: msm8996: add support to blsp1_spi0 arm64: dts: msm8996: add support to blsp2_spi5 pinctrl arm64: dts: msm8996: add support to blsp2_spi5 arm64: dts: msm8996: add sdc2 pinctrl arm64: dts: msm8996: add sdc2 support arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 303 +++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 103 +++++++++- 2 files changed, 405 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/qcom/msm8996-pins.dtsi -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
