Linux Serial

• Date Index

• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, (continued)
  • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Mark Brown
  • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Wolfram Sang
  • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, kernel test robot
  • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, Chris Packham
  • Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode, kernel test robot
  • Re: [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq(), Wolfram Sang
• [PATCH v4 0/2] Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support, Phil Edworthy
  • [PATCH v4 1/2] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers, Phil Edworthy
    • Re: [PATCH v4 1/2] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers, Rob Herring
      • RE: [PATCH v4 1/2] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers, Phil Edworthy
• [PATCH 1/3] tty: n_gsm: fix buffer over-read in gsm_dlci_data(), D. Starke
  • [PATCH 3/3] tty: n_gsm: fix invalid gsmtty_write_room() result, D. Starke
    • Re: [PATCH 3/3] tty: n_gsm: fix invalid gsmtty_write_room() result, Jiri Slaby
  • [PATCH 2/3] tty: n_gsm: fix mux activation issues in gsm_config(), D. Starke
    • Re: [PATCH 2/3] tty: n_gsm: fix mux activation issues in gsm_config(), Jiri Slaby
  • Re: [PATCH 1/3] tty: n_gsm: fix buffer over-read in gsm_dlci_data(), Jiri Slaby
  • <Possible follow-ups>
  • RE: [PATCH 1/3] tty: n_gsm: fix buffer over-read in gsm_dlci_data(), Starke, Daniel
• [PATCH RESEND] serial: men_z135_uart: Drop duplicated iotype assignment, Ilpo Järvinen
  • Re: [PATCH RESEND] serial: men_z135_uart: Drop duplicated iotype assignment, Jiri Slaby
• [PATCH 1/1] termbits: Convert octal defines to hex, Ilpo Järvinen
  • Re: [PATCH 1/1] termbits: Convert octal defines to hex, Arnd Bergmann
    • Re: [PATCH 1/1] termbits: Convert octal defines to hex, Ilpo Järvinen
      • Re: [PATCH 1/1] termbits: Convert octal defines to hex, Arnd Bergmann
        • Re: [PATCH 1/1] termbits: Convert octal defines to hex, Ilpo Järvinen
          • Re: [PATCH 1/1] termbits: Convert octal defines to hex, Arnd Bergmann
  • Re: [PATCH 1/1] termbits: Convert octal defines to hex, Michael Ellerman
• [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas, Rob Herring
  • Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas, Mark Brown
  • Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas, Marc Kleine-Budde
  • Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas, Vinod Koul
  • Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas, Ulf Hansson
  • Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas, Jonathan Cameron
  • Re: [PATCH] dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas, Rob Herring
• [PATCH v3 00/12] Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support, Phil Edworthy
  • [PATCH v3 01/12] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers, Phil Edworthy
    • Re: [PATCH v3 01/12] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers, Geert Uytterhoeven
      • RE: [PATCH v3 01/12] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers, Phil Edworthy
• [PATCH 0/7] serial: pch: cleanup, Jiri Slaby
  • [PATCH 1/7] serial: pch: move size check from pop_tx one level up, Jiri Slaby
    • Re: [PATCH 1/7] serial: pch: move size check from pop_tx one level up, Andy Shevchenko
  • [PATCH 2/7] serial: pch: don't overwrite xmit->buf[0] by x_char, Jiri Slaby
    • [PATCH 5/7] serial: pch: remove xmit circ_buf size double check, Jiri Slaby
    • [PATCH 3/7] serial: pch: decomission pch_uart_hal_write(), Jiri Slaby
    • [PATCH 6/7] serial: pch: simplify pop_tx() even more, Jiri Slaby
    • [PATCH 7/7] serial: pch: inline pop_tx() into handle_tx(), Jiri Slaby
    • [PATCH 4/7] serial: pch: remove debug print from pop_tx, Jiri Slaby
• [PATCH 00/11] serial: pic32: cleanup, Jiri Slaby
  • [PATCH 01/11] serial: pic32: remove unused items from the header, Jiri Slaby
  • [PATCH 03/11] serial: pic32: remove constants from struct pic32_sport, Jiri Slaby
  • [PATCH 05/11] serial: pic32: simplify pic32_sport::enable_tx_irq handling, Jiri Slaby
  • [PATCH 04/11] serial: pic32: simplify clk handling, Jiri Slaby
  • [PATCH 06/11] serial: pic32: remove pic32_get_port() macro, Jiri Slaby
  • [PATCH 10/11] serial: pic32: free up irq names correctly, Jiri Slaby
  • [PATCH 02/11] serial: pic32: move header content to .c, Jiri Slaby
  • [PATCH 09/11] serial: pic32: don't zero members of kzalloc-ated structure, Jiri Slaby
  • [PATCH 07/11] serial: pic32: convert to_pic32_sport() to an inline, Jiri Slaby
  • [PATCH 08/11] serial: pic32: don't assign pic32_sport::cts_gpio twice, Jiri Slaby
  • [PATCH 11/11] serial: pic32: restore disabled irqs in pic32_uart_startup(), Jiri Slaby
• [PATCH 0/7] dt-bindings: renesas: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
  • [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4, Vinod Koul
  • [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4, Wolfram Sang
  • [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4, Wolfram Sang
    • Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4, Bartosz Golaszewski
  • [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4, Wolfram Sang
    • Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4, Guenter Roeck
  • [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4, Wolfram Sang
  • [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4, Joerg Roedel
    • Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4, Wolfram Sang
  • [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4, Geert Uytterhoeven
    • Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4, Krzysztof Kozlowski
    • Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4, Wolfram Sang
    • Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4, Wolfram Sang
• [PATCH 1/2] serial: 8250: core: Remove unneeded <linux/pm_runtime.h>, Geert Uytterhoeven
  • [PATCH 2/2] serial: 8250: pxa: Remove unneeded <linux/pm_runtime.h>, Geert Uytterhoeven
  • Re: [PATCH 1/2] serial: 8250: core: Remove unneeded <linux/pm_runtime.h>, Andy Shevchenko
  • Re: [PATCH 1/2] serial: 8250: core: Remove unneeded <linux/pm_runtime.h>, Ilpo Järvinen
• [PATCH] serial: 8250: dw: Fix NULL pointer dereference, Heikki Krogerus
  • Re: [PATCH] serial: 8250: dw: Fix NULL pointer dereference, Andy Shevchenko
• [PATCH 0/2] Disable MMIO tracing from QUP wrapper and serial driver, Vijaya Krishna Nivarthi
  • [PATCH 1/2] soc: qcom: geni: Disable MMIO tracing, Vijaya Krishna Nivarthi
    • Re: [PATCH 1/2] soc: qcom: geni: Disable MMIO tracing, Greg KH
  • [PATCH 2/2] tty: serial: qcom_geni_serial: Disable MMIO tracing, Vijaya Krishna Nivarthi
    • Re: [PATCH 2/2] tty: serial: qcom_geni_serial: Disable MMIO tracing, Greg KH
  • Re: [PATCH 0/2] Disable MMIO tracing from QUP wrapper and serial driver, Greg KH
    • Re: [PATCH 0/2] Disable MMIO tracing from QUP wrapper and serial driver, Sai Prakash Ranjan
• [PATCH] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled, Vijaya Krishna Nivarthi
  • Re: [PATCH] serial: core: Do stop_rx in suspend path for console if console_suspend is disabled, Vijaya Krishna Nivarthi
• [PATCH] tty: serial: samsung_tty: Fix suspend/resume on S5L, Hector Martin
  • Re: [PATCH] tty: serial: samsung_tty: Fix suspend/resume on S5L, Greg Kroah-Hartman
    • Re: [PATCH] tty: serial: samsung_tty: Fix suspend/resume on S5L, Hector Martin
      • Re: [PATCH] tty: serial: samsung_tty: Fix suspend/resume on S5L, Krzysztof Kozlowski
• [tty:tty-testing] BUILD SUCCESS 1e70d57e7285996bcf0a226eac8c5ba43a89f85d, kernel test robot
• [tty:tty-linus] BUILD SUCCESS 19317433057dc1f2ca9a975e4e6b547282c2a5ef, kernel test robot
• [PATCH 1/2] serial: stm32: Factor out GPIO RTS toggling into separate function, Marek Vasut
  • [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode, Marek Vasut
    • Re: [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode, Erwan LE RAY
      • Re: [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode, Marek Vasut
        • Re: [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode, Erwan LE RAY
          • Re: [PATCH 2/2] serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode, Marek Vasut
• [GIT PULL] TTY/Serial driver fixes for 5.18-rc5, Greg KH
  • Re: [GIT PULL] TTY/Serial driver fixes for 5.18-rc5, pr-tracker-bot
• [PATCH 0/2] serial: sifive: Correct/improve baud base handling, Maciej W. Rozycki
  • [PATCH 1/2] serial: sifive: Report actual baud base rather than fixed 115200, Maciej W. Rozycki
  • [PATCH 2/2] serial: sifive: Remove duplicate `clkin_rate' setting, Maciej W. Rozycki
• [RFC v2 34/39] tty: serial: add HAS_IOPORT dependencies, Niklas Schnelle
  • Re: [RFC v2 34/39] tty: serial: add HAS_IOPORT dependencies, Maciej W. Rozycki
• [PATCH 29/37] tty: serial: add HAS_IOPORT dependencies, Niklas Schnelle
  • Re: [PATCH 29/37] tty: serial: add HAS_IOPORT dependencies, Niklas Schnelle
• [PATCH v2] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Ilpo Järvinen
  • Re: [PATCH v2] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Greg KH
    • Re: [PATCH v2] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Ilpo Järvinen
      • Re: [PATCH v2] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Greg KH
• [PATCH] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Ilpo Järvinen
  • Re: [PATCH] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Nuno Gonçalves
    • Re: [PATCH] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Ilpo Järvinen
      • Re: [PATCH] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Nuno Gonçalves
        • Re: [PATCH] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Ilpo Järvinen
  • <Possible follow-ups>
  • [PATCH] serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle, Ilpo Järvinen
• [PATCH 0/7] tty: xilinx_uartps: fixes and improvements, Shubhrajyoti Datta
  • [PATCH 3/7] tty: xilinx_uartps: Add check for runtime_get_sync calls, Shubhrajyoti Datta
    • Re: [PATCH 3/7] tty: xilinx_uartps: Add check for runtime_get_sync calls, Greg KH
      • RE: [PATCH 3/7] tty: xilinx_uartps: Add check for runtime_get_sync calls, Shubhrajyoti Datta
  • [PATCH 1/7] xilinx: Update copyright text to correct format, Shubhrajyoti Datta
  • [PATCH 2/7] tty: xilinx_uartps: Check the clk_enable return value, Shubhrajyoti Datta
    • Re: [PATCH 2/7] tty: xilinx_uartps: Check the clk_enable return value, Greg KH
      • RE: [PATCH 2/7] tty: xilinx_uartps: Check the clk_enable return value, Datta, Shubhrajyoti
        • Re: [PATCH 2/7] tty: xilinx_uartps: Check the clk_enable return value, Greg KH
  • [PATCH 4/7] tty: xilinx_uartps: Check clk_enable return value, Shubhrajyoti Datta
    • Re: [PATCH 4/7] tty: xilinx_uartps: Check clk_enable return value, Greg KH
  • [PATCH 5/7] tty: xilinx_uartps: Make the timeout unsigned, Shubhrajyoti Datta
    • Re: [PATCH 5/7] tty: xilinx_uartps: Make the timeout unsigned, Greg KH
  • [PATCH 6/7] serial: uartps: Fix the ignore_status, Shubhrajyoti Datta
    • Re: [PATCH 6/7] serial: uartps: Fix the ignore_status, Greg KH
  • [PATCH 7/7] serial: uartps: Prevent writes when the controller is disabled, Shubhrajyoti Datta
    • Re: [PATCH 7/7] serial: uartps: Prevent writes when the controller is disabled, Greg KH
  • Re: [PATCH 0/7] tty: xilinx_uartps: fixes and improvements, Greg KH
    • RE: [PATCH 0/7] tty: xilinx_uartps: fixes and improvements, Shubhrajyoti Datta
• [RFC PATCH] serial: Don't assume uart_ops .throttle is always set, Ilpo Järvinen
  • Re: [RFC PATCH] serial: Don't assume uart_ops .throttle is always set, Greg KH
  • Re: [RFC PATCH] serial: Don't assume uart_ops .throttle is always set, Tomasz Mon
    • Re: [RFC PATCH] serial: Don't assume uart_ops .throttle is always set, Ilpo Järvinen
• pl011 (Raspberry Pi) crash, Nuno Gonçalves
  • Re: pl011 (Raspberry Pi) crash, Ilpo Järvinen
• [PATCH 0/3] MediaTek 8250 UART: fixes and improvements, AngeloGioacchino Del Regno
  • [PATCH 3/3] serial: 8250_mtk: Fix register address for XON/XOFF character, AngeloGioacchino Del Regno
  • [PATCH 1/3] serial: 8250_mtk: Fix UART_EFR register address, AngeloGioacchino Del Regno
  • [PATCH 2/3] serial: 8250_mtk: Make sure to select the right FEATURE_SEL, AngeloGioacchino Del Regno
• [PATCH v4 0/3] tty/serial: Process XON/XOFF robustly, Ilpo Järvinen
  • [PATCH v4 2/3] tty: Implement lookahead to process XON/XOFF timely, Ilpo Järvinen
  • [PATCH v4 1/3] tty: Rework receive flow control char logic, Ilpo Järvinen
  • [PATCH v4 3/3] tty: Use flow-control char function on closing path, Ilpo Järvinen
  • Re: [PATCH v4 0/3] tty/serial: Process XON/XOFF robustly, Greg KH
• [PATCH v5 00/10] Add RS485 support to DW UART, Ilpo Järvinen
  • [PATCH v5 02/10] serial: 8250_dwlib: Implement SW half duplex support, Ilpo Järvinen
  • [PATCH v5 01/10] serial: 8250_dwlib: RS485 HW half & full duplex support, Ilpo Järvinen
  • [PATCH v5 03/10] dt_bindings: rs485: Add receiver enable polarity, Ilpo Järvinen
  • [PATCH v5 04/10] ACPI / property: Document RS485 _DSD properties, Ilpo Järvinen
  • [PATCH v5 08/10] serial: 8250: create lsr_save_mask, Ilpo Järvinen
  • [PATCH v5 06/10] serial: General support for multipoint addresses, Ilpo Järvinen
    • Re: [PATCH v5 06/10] serial: General support for multipoint addresses, Greg KH
      • Re: [PATCH v5 06/10] serial: General support for multipoint addresses, Ilpo Järvinen
        • Re: [PATCH v5 06/10] serial: General support for multipoint addresses, Greg KH
  • [PATCH v5 07/10] serial: 8250: make saved LSR larger, Ilpo Järvinen
  • [PATCH v5 09/10] serial: 8250_lpss: Use 32-bit reads, Ilpo Järvinen
  • [PATCH v5 10/10] serial: 8250_dwlib: Support for 9th bit multipoint addressing, Ilpo Järvinen
  • [PATCH v5 05/10] serial: termbits: ADDRB to indicate 9th bit addressing mode, Ilpo Järvinen
    • Re: [PATCH v5 05/10] serial: termbits: ADDRB to indicate 9th bit addressing mode, Greg KH
      • Re: [PATCH v5 05/10] serial: termbits: ADDRB to indicate 9th bit addressing mode, Ilpo Järvinen
        • Re: [PATCH v5 05/10] serial: termbits: ADDRB to indicate 9th bit addressing mode, Ilpo Järvinen
          • Re: [PATCH v5 05/10] serial: termbits: ADDRB to indicate 9th bit addressing mode, Greg KH
            • Re: [PATCH v5 05/10] serial: termbits: ADDRB to indicate 9th bit addressing mode, Ilpo Järvinen
  • Re: [PATCH v5 00/10] Add RS485 support to DW UART, Greg KH
• [PATCH v4 00/13] Add RS485 support to DW UART, Ilpo Järvinen
  • [PATCH v4 01/13] serial: Store character timing information to uart_port, Ilpo Järvinen
  • [PATCH v4 02/13] serial: 8250: use THRE & __stop_tx also with DMA, Ilpo Järvinen
  • [PATCH v4 03/13] serial: 8250: Handle UART without interrupt on TEMT, Ilpo Järvinen
  • [PATCH v4 04/13] serial: 8250_dwlib: RS485 HW half & full duplex support, Ilpo Järvinen
    • Re: [PATCH v4 04/13] serial: 8250_dwlib: RS485 HW half & full duplex support, Greg KH
    • Re: [PATCH v4 04/13] serial: 8250_dwlib: RS485 HW half & full duplex support, Lukas Wunner
      • Re: [PATCH v4 04/13] serial: 8250_dwlib: RS485 HW half & full duplex support, Ilpo Järvinen
        • Re: [PATCH v4 04/13] serial: 8250_dwlib: RS485 HW half & full duplex support, Lukas Wunner
  • [PATCH v4 05/13] serial: 8250_dwlib: Implement SW half duplex support, Ilpo Järvinen
  • [PATCH v4 06/13] dt_bindings: rs485: Add receiver enable polarity, Ilpo Järvinen
  • [PATCH v4 07/13] ACPI / property: Document RS485 _DSD properties, Ilpo Järvinen
  • [PATCH v4 08/13] serial: termbits: ADDRB to indicate 9th bit addressing mode, Ilpo Järvinen
  • [PATCH v4 09/13] serial: General support for multipoint addresses, Ilpo Järvinen
  • [PATCH v4 10/13] serial: 8250: make saved LSR larger, Ilpo Järvinen
  • [PATCH v4 13/13] serial: 8250_dwlib: Support for 9th bit multipoint addressing, Ilpo Järvinen
  • [PATCH v4 12/13] serial: 8250_lpss: Use 32-bit reads, Ilpo Järvinen
  • [PATCH v4 11/13] serial: 8250: create lsr_save_mask, Ilpo Järvinen
• [PATCH 1/1] tty: n_gsm: fix sometimes uninitialized warning in gsm_dlci_modem_output(), D. Starke
• [PATCH v2 0/7] treewide: Initial support for R-Car V4H, Yoshihiro Shimoda
  • [PATCH v2 2/7] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Yoshihiro Shimoda
    • Re: [PATCH v2 2/7] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Geert Uytterhoeven
    • Re: [PATCH v2 2/7] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Krzysztof Kozlowski
  • [PATCH v2 4/7] clk: renesas: rcar-gen4: Add CLK_TYPE_GEN4_PLL4, Yoshihiro Shimoda
    • Re: [PATCH v2 4/7] clk: renesas: rcar-gen4: Add CLK_TYPE_GEN4_PLL4, Geert Uytterhoeven
  • [PATCH v2 6/7] arm64: dts: renesas: Add Renesas R8A779G0 SoC support, Yoshihiro Shimoda
    • Re: [PATCH v2 6/7] arm64: dts: renesas: Add Renesas R8A779G0 SoC support, Geert Uytterhoeven
      • RE: [PATCH v2 6/7] arm64: dts: renesas: Add Renesas R8A779G0 SoC support, Yoshihiro Shimoda
  • [PATCH v2 7/7] arm64: dts: renesas: Add Renesas White Hawk boards support, Yoshihiro Shimoda
    • Re: [PATCH v2 7/7] arm64: dts: renesas: Add Renesas White Hawk boards support, Geert Uytterhoeven
  • [PATCH v2 5/7] clk: renesas: cpg-mssr: Add support for R-Car V4H, Yoshihiro Shimoda
    • Re: [PATCH v2 5/7] clk: renesas: cpg-mssr: Add support for R-Car V4H, Geert Uytterhoeven
      • RE: [PATCH v2 5/7] clk: renesas: cpg-mssr: Add support for R-Car V4H, Yoshihiro Shimoda
  • [PATCH v2 3/7] dt-bindings: serial: renesas,hscif: Document r8a779g0 bindings, Yoshihiro Shimoda
    • Re: [PATCH v2 3/7] dt-bindings: serial: renesas,hscif: Document r8a779g0 bindings, Geert Uytterhoeven
  • [PATCH v2 1/7] dt-bindings: power: Add r8a779g0 SYSC power domain definitions, Yoshihiro Shimoda
• [tty:tty-testing] BUILD SUCCESS 8043b16f522c9e21e2361a67514386bee3731c6e, kernel test robot
• [tty:tty-linus 23/26] drivers/tty/n_gsm.c:939:13: warning: variable 'size' is used uninitialized whenever 'if' condition is false, kernel test robot
  • Re: [tty:tty-linus 23/26] drivers/tty/n_gsm.c:939:13: warning: variable 'size' is used uninitialized whenever 'if' condition is false, Greg Kroah-Hartman
    • Re: [tty:tty-linus 23/26] drivers/tty/n_gsm.c:939:13: warning: variable 'size' is used uninitialized whenever 'if' condition is false, Nathan Chancellor
  • <Possible follow-ups>
  • RE: [tty:tty-linus 23/26] drivers/tty/n_gsm.c:939:13: warning: variable 'size' is used uninitialized whenever 'if' condition is false, Starke, Daniel
• [PATCH v7 0/9] serial: 8250: dw: RZN1 DMA support, Miquel Raynal
  • [PATCH v7 5/9] serial: 8250: dma: Allow driver operations before starting DMA transfers, Miquel Raynal
  • [PATCH v7 1/9] serial: 8250: dw: Move definitions to the shared header, Miquel Raynal
  • [PATCH v7 7/9] serial: 8250: dw: Move the IO accessors to 8250_dwlib.h, Miquel Raynal
  • [PATCH v7 2/9] serial: 8250: dw: Create a generic platform data structure, Miquel Raynal
  • [PATCH v7 8/9] serial: 8250: dw: Add support for DMA flow controlling devices, Miquel Raynal
  • [PATCH v7 9/9] serial: 8250: dw: Improve RZN1 support, Miquel Raynal
  • [PATCH v7 4/9] serial: 8250: dw: Allow to use a fallback CPR value if not synthesized, Miquel Raynal
  • [PATCH v7 6/9] serial: 8250: dw: Introduce an rx_timeout variable in the IRQ path, Miquel Raynal
  • [PATCH v7 3/9] serial: 8250: dw: Move the USR register to pdata, Miquel Raynal
• [PATCH V3 0/2] Add q 12MHz internal clock rate to calculate, Yu Tu
  • [PATCH V3 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Yu Tu
    • Re: [PATCH V3 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Neil Armstrong
  • [PATCH V3 2/2] tty: serial: meson: Added S4 SOC compatibility, Yu Tu
    • Re: [PATCH V3 2/2] tty: serial: meson: Added S4 SOC compatibility, Neil Armstrong
  • Re: [PATCH V3 0/2] Add q 12MHz internal clock rate to calculate, Neil Armstrong
• [PATCH 1/3] tty: n_gsm: fix broken virtual tty handling, D. Starke
  • [PATCH 3/3] tty: n_gsm: fix software flow control handling, D. Starke
  • [PATCH 2/3] tty: n_gsm: fix invalid use of MSC in advanced option, D. Starke
• [tty:tty-testing] BUILD SUCCESS 05fe70dd2efd13de700c2dfe5169d3a7a5050bc2, kernel test robot
• [PATCH] serial: sunplus-uart: change sunplus_console_ports from global to static, Tom Rix
  • Re: [PATCH] serial: sunplus-uart: change sunplus_console_ports from global to static, Jiri Slaby
• [PATCH 0/7] serial: various cleanups, Jiri Slaby
  • [PATCH 4/7] serial: zs: use NULL as a pointer, not 0, Jiri Slaby
  • [PATCH 5/7] serial: qcom: use check for empty instead of pending, Jiri Slaby
  • [PATCH 3/7] serial: xilinx_uartps: cache xmit in cdns_uart_handle_tx(), Jiri Slaby
  • [PATCH 1/7] serial: sunplus-uart: mark sunplus_console_ports[] static, Jiri Slaby
  • [PATCH 7/7] serial: allow COMPILE_TEST for some drivers, Jiri Slaby
    • Re: [PATCH 7/7] serial: allow COMPILE_TEST for some drivers, Randy Dunlap
  • [PATCH 2/7] serial: xilinx_uartps: return early in cdns_uart_handle_tx(), Jiri Slaby
  • [PATCH 6/7] serial: pic32: make SERIAL_PIC32_CONSOLE depend on SERIAL_PIC32=y, Jiri Slaby
• [PATCH v6 00/12] serial: 8250: dw: RZN1 DMA support, Miquel Raynal
  • [PATCH v6 02/12] serial: 8250: dw: Create a generic platform data structure, Miquel Raynal
  • [PATCH v6 05/12] serial: 8250: dma: Allow driver operations before starting DMA transfers, Miquel Raynal
  • [PATCH v6 06/12] serial: 8250: dw: Introduce an rx_timeout variable in the IRQ path, Miquel Raynal
  • [PATCH v6 03/12] serial: 8250: dw: Move the USR register to pdata, Miquel Raynal
  • [PATCH v6 10/12] ARM: dts: r9a06g032: Fill the UART DMA properties, Miquel Raynal
    • Re: [PATCH v6 10/12] ARM: dts: r9a06g032: Fill the UART DMA properties, Geert Uytterhoeven
      • Re: [PATCH v6 10/12] ARM: dts: r9a06g032: Fill the UART DMA properties, Geert Uytterhoeven
  • [PATCH v6 11/12] bestla: Enable DMA, UART3 and UART4, Miquel Raynal
    • Re: [PATCH v6 11/12] bestla: Enable DMA, UART3 and UART4, Miquel Raynal
      • Re: [PATCH v6 11/12] bestla: Enable DMA, UART3 and UART4, Greg Kroah-Hartman
        • Re: [PATCH v6 11/12] bestla: Enable DMA, UART3 and UART4, Geert Uytterhoeven
          • Re: [PATCH v6 11/12] bestla: Enable DMA, UART3 and UART4, Miquel Raynal
  • [PATCH v6 01/12] serial: 8250: dw: Move definitions to the shared header, Miquel Raynal
  • [PATCH v6 08/12] serial: 8250: dw: Add support for DMA flow controlling devices, Miquel Raynal
  • [PATCH v6 09/12] serial: 8250: dw: Improve RZN1 support, Miquel Raynal
  • [PATCH v6 07/12] serial: 8250: dw: Move the IO accessors to 8250_dwlib.h, Miquel Raynal
  • [PATCH v6 12/12] bestla: Add support for RZN1 dmamux, Miquel Raynal
  • [PATCH v6 04/12] serial: 8250: dw: Allow to use a fallback CPR value if not synthesized, Miquel Raynal
• [PATCH 00/10] serial: icom: cleanup, Jiri Slaby
  • [PATCH 05/10] serial: icom: move header content to .c, Jiri Slaby
  • [PATCH 03/10] serial: icom: remove to_icom_adapter() and icom_kref_release(), Jiri Slaby
  • [PATCH 09/10] serial: icom: delete empty serial hooks, Jiri Slaby
  • [PATCH 04/10] serial: icom: use proper __le types and functions, Jiri Slaby
  • [PATCH 07/10] serial: icom: make icom_acfg_baud const and unsigned, Jiri Slaby
  • [PATCH 01/10] serial: icom: remove ICOM_VERSION_STR macro, Jiri Slaby
  • [PATCH 10/10] serial: icom: remove unused struct icom_port members, Jiri Slaby
  • [PATCH 08/10] serial: icom: use list_for_each_entry(), Jiri Slaby
  • [PATCH 02/10] serial: icom: switch vague casts to container_of, Jiri Slaby
  • [PATCH 06/10] serial: icom: use ARRAY_SIZE, Jiri Slaby
• [tty:tty-linus] BUILD SUCCESS 48473802506d2d6151f59e0e764932b33b53cb3b, kernel test robot
• [tty:tty-next] BUILD SUCCESS 2a72b1b2db9dbe12c730754009196a132500f007, kernel test robot
• [tty:tty-testing] BUILD SUCCESS 871277738426e188cf5b8eb7a2fbee1e27a496cb, kernel test robot
• [PATCH v3 1/3] tty: n_gsm: fix missing update of modem controls after DLCI open, D. Starke
  • [PATCH v3 3/3] tty: n_gsm: clean up implicit CR bit encoding in address field, D. Starke
  • [PATCH v3 2/3] tty: n_gsm: clean up dead code in gsm_queue(), D. Starke
• [PATCH 00/15] treewide: Initial support for R-Car V4H, Yoshihiro Shimoda
  • [PATCH 02/15] dt-bindings: arm: renesas: Document Renesas White Hawk boards, Yoshihiro Shimoda
    • Re: [PATCH 02/15] dt-bindings: arm: renesas: Document Renesas White Hawk boards, Krzysztof Kozlowski
    • Re: [PATCH 02/15] dt-bindings: arm: renesas: Document Renesas White Hawk boards, Geert Uytterhoeven
  • [PATCH 01/15] dt-bindings: arm: renesas: Document R-Car V4H SoC DT bindings, Yoshihiro Shimoda
    • Re: [PATCH 01/15] dt-bindings: arm: renesas: Document R-Car V4H SoC DT bindings, Geert Uytterhoeven
  • [PATCH 06/15] dt-bindings: clock: renesas,cpg-mssr: Document r8a779g0, Yoshihiro Shimoda
    • Re: [PATCH 06/15] dt-bindings: clock: renesas,cpg-mssr: Document r8a779g0, Krzysztof Kozlowski
    • Re: [PATCH 06/15] dt-bindings: clock: renesas,cpg-mssr: Document r8a779g0, Geert Uytterhoeven
  • [PATCH 04/15] dt-bindings: power: renesas,rcar-sysc: Document r8a779g0 SYSC bindings, Yoshihiro Shimoda
    • Re: [PATCH 04/15] dt-bindings: power: renesas,rcar-sysc: Document r8a779g0 SYSC bindings, Krzysztof Kozlowski
    • Re: [PATCH 04/15] dt-bindings: power: renesas,rcar-sysc: Document r8a779g0 SYSC bindings, Geert Uytterhoeven
  • [PATCH 03/15] dt-bindings: reset: renesas,rst: Document r8a779g0 reset module, Yoshihiro Shimoda
    • Re: [PATCH 03/15] dt-bindings: reset: renesas,rst: Document r8a779g0 reset module, Krzysztof Kozlowski
    • Re: [PATCH 03/15] dt-bindings: reset: renesas,rst: Document r8a779g0 reset module, Geert Uytterhoeven
  • [PATCH 08/15] dt-bindings: serial: renesas,hscif: Document r8a779g0 bindings, Yoshihiro Shimoda
    • Re: [PATCH 08/15] dt-bindings: serial: renesas,hscif: Document r8a779g0 bindings, Krzysztof Kozlowski
    • Re: [PATCH 08/15] dt-bindings: serial: renesas,hscif: Document r8a779g0 bindings, Geert Uytterhoeven
      • Re: [PATCH 08/15] dt-bindings: serial: renesas,hscif: Document r8a779g0 bindings, Geert Uytterhoeven
        • RE: [PATCH 08/15] dt-bindings: serial: renesas,hscif: Document r8a779g0 bindings, Yoshihiro Shimoda
  • [PATCH 05/15] dt-bindings: power: Add r8a779g0 SYSC power domain definitions, Yoshihiro Shimoda
    • Re: [PATCH 05/15] dt-bindings: power: Add r8a779g0 SYSC power domain definitions, Krzysztof Kozlowski
      • Re: [PATCH 05/15] dt-bindings: power: Add r8a779g0 SYSC power domain definitions, Geert Uytterhoeven
        • Re: [PATCH 05/15] dt-bindings: power: Add r8a779g0 SYSC power domain definitions, Krzysztof Kozlowski
    • Re: [PATCH 05/15] dt-bindings: power: Add r8a779g0 SYSC power domain definitions, Geert Uytterhoeven
  • [PATCH 12/15] clk: renesas: rcar-gen4: Add CLK_TYPE_GEN4_PLL4, Yoshihiro Shimoda
    • Re: [PATCH 12/15] clk: renesas: rcar-gen4: Add CLK_TYPE_GEN4_PLL4, Geert Uytterhoeven
      • RE: [PATCH 12/15] clk: renesas: rcar-gen4: Add CLK_TYPE_GEN4_PLL4, Yoshihiro Shimoda
  • [PATCH 10/15] soc: renesas: Identify R-Car V4H, Yoshihiro Shimoda
    • Re: [PATCH 10/15] soc: renesas: Identify R-Car V4H, Geert Uytterhoeven
  • [PATCH 11/15] soc: renesas: rcar-rst: Add support for R-Car V4H, Yoshihiro Shimoda
    • Re: [PATCH 11/15] soc: renesas: rcar-rst: Add support for R-Car V4H, Geert Uytterhoeven
  • [PATCH 09/15] soc: renesas: r8a779g0-sysc: Add r8a779g0 support, Yoshihiro Shimoda
    • Re: [PATCH 09/15] soc: renesas: r8a779g0-sysc: Add r8a779g0 support, Geert Uytterhoeven
  • [PATCH 07/15] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Yoshihiro Shimoda
    • Re: [PATCH 07/15] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Krzysztof Kozlowski
      • RE: [PATCH 07/15] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Yoshihiro Shimoda
        • Re: [PATCH 07/15] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Krzysztof Kozlowski
          • RE: [PATCH 07/15] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Yoshihiro Shimoda
    • Re: [PATCH 07/15] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Geert Uytterhoeven
      • RE: [PATCH 07/15] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Yoshihiro Shimoda
        • Re: [PATCH 07/15] dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions, Geert Uytterhoeven
  • [PATCH 14/15] arm64: dts: renesas: Add Renesas R8A779G0 SoC support, Yoshihiro Shimoda
    • Re: [PATCH 14/15] arm64: dts: renesas: Add Renesas R8A779G0 SoC support, Krzysztof Kozlowski
  • [PATCH 13/15] clk: renesas: cpg-mssr: Add support for R-Car V4H, Yoshihiro Shimoda
  • [PATCH 15/15] arm64: dts: renesas: Add Renesas White Hawk boards support, Yoshihiro Shimoda
    • Re: [PATCH 15/15] arm64: dts: renesas: Add Renesas White Hawk boards support, Krzysztof Kozlowski
• [PATCH v2 1/1] Revert "serial: 8250: Handle UART without interrupt on TEMT using em485", Ilpo Järvinen
• [PATCH 1/1] serial: 8250: revert UART_CAP_NOTEMT changes, Ilpo Järvinen
  • Re: [PATCH 1/1] serial: 8250: revert UART_CAP_NOTEMT changes, Uwe Kleine-König
    • Re: [PATCH 1/1] serial: 8250: revert UART_CAP_NOTEMT changes, Ilpo Järvinen
• [PATCH 00/41] OMAP1 full multiplatform conversion, Arnd Bergmann
  • [PATCH 01/41] video: fbdev: omapfb: lcd_ams_delta: fix unused variable warning, Arnd Bergmann
    • Re: [PATCH 01/41] video: fbdev: omapfb: lcd_ams_delta: fix unused variable warning, Sergei Shtylyov
      • Re: [PATCH 01/41] video: fbdev: omapfb: lcd_ams_delta: fix unused variable warning, Arnd Bergmann
  • [PATCH 02/41] ARM: omap1: innovator: pass lcd control address as pdata, Arnd Bergmann
  • [PATCH 03/41] ARM: omap1: move lcd_dma code into omapfb driver, Arnd Bergmann
  • [PATCH 04/41] ARM: omap1: declare a dummy omap_set_dma_priority, Arnd Bergmann
  • [PATCH 05/41] fbdev: omap: pass irqs as resource, Arnd Bergmann
  • [PATCH 06/41] ARM: omap1: ams-delta: remove camera leftovers, Arnd Bergmann
  • [PATCH 07/41] ARM: omap1: move mach/usb.h to include/linux/soc, Arnd Bergmann
  • [PATCH 08/41] ARM: omap1: move some headers to include/linux/soc, Arnd Bergmann
  • [PATCH 09/41] ARM: omap1: move perseus spi pinconf to board file, Arnd Bergmann
  • [PATCH 13/41] clocksource: ti-dmtimer: avoid using mach/hardware.h, Arnd Bergmann
  • [PATCH 20/41] dma: omap: hide legacy interface, Arnd Bergmann
    • Re: [PATCH 20/41] dma: omap: hide legacy interface, Vinod Koul
  • [PATCH 17/41] ARM: omap1: move 32k counter from plat-omap to mach-omap1, Arnd Bergmann
    • Re: [PATCH 17/41] ARM: omap1: move 32k counter from plat-omap to mach-omap1, Tony Lindgren
  • [PATCH 15/41] input: omap: void using mach/*.h headers, Arnd Bergmann
    • Re: [PATCH 15/41] input: omap: void using mach/*.h headers, Dmitry Torokhov
  • [PATCH 18/41] ARM: omap: remove debug-leds driver, Arnd Bergmann
  • [PATCH 22/41] ARM: omap1: move plat/dma.c to mach/omap-dma.c, Arnd Bergmann
    • Re: [PATCH 22/41] ARM: omap1: move plat/dma.c to mach/omap-dma.c, Péter Ujfalusi
  • [PATCH 21/41] ARM: omap1: dma: remove omap2 specific bits, Arnd Bergmann
    • Re: [PATCH 21/41] ARM: omap1: dma: remove omap2 specific bits, Péter Ujfalusi
  • [PATCH 10/41] ARM: omap1: move CF chipselect setup to board file, Arnd Bergmann
  • [PATCH 19/41] ARM: omap: dma: make usb support optional, Arnd Bergmann
    • Re: [PATCH 19/41] ARM: omap: dma: make usb support optional, Péter Ujfalusi
  • [PATCH 16/41] ARM: omap1: innovator: move ohci phy power handling to board file, Arnd Bergmann
  • [PATCH 28/41] ARM: omap1: move mach/*.h into mach directory, Arnd Bergmann
  • [PATCH 27/41] ARM: omap1: use pci_remap_iospace() for omap_cf, Arnd Bergmann
  • [PATCH 12/41] usb: omap: avoid mach/*.h headers, Arnd Bergmann
  • [PATCH 24/41] ARM: omap: un-merge plat/sram.c, Arnd Bergmann
    • Re: [PATCH 24/41] ARM: omap: un-merge plat/sram.c, Tony Lindgren
  • [PATCH 11/41] fbdev: omap: avoid using mach/*.h files, Arnd Bergmann
  • [PATCH 26/41] ARM: omap1: relocate static I/O mapping, Arnd Bergmann
    • Re: [PATCH 26/41] ARM: omap1: relocate static I/O mapping, Aaro Koskinen
      • Re: [PATCH 26/41] ARM: omap1: relocate static I/O mapping, Arnd Bergmann
        • Re: [PATCH 26/41] ARM: omap1: relocate static I/O mapping, Tony Lindgren
  • [PATCH 14/41] serial: 8250/omap1: include linux/soc/ti/omap1-soc.h, Arnd Bergmann
    • Re: [PATCH 14/41] serial: 8250/omap1: include linux/soc/ti/omap1-soc.h, Greg KH
  • [PATCH 23/41] ARM: omap: split up arch/arm/plat-omap/Kconfig, Arnd Bergmann
  • [PATCH 25/41] ARM: omap: remove empty plat-omap directory, Arnd Bergmann
  • [PATCH 29/41] ARM: omap1: fix build with no SoC selected, Arnd Bergmann
  • [PATCH 30/41] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF, Arnd Bergmann
  • [PATCH 31/41] ARM: OMAP1: clock: Fix early UART rate issues, Arnd Bergmann
  • [PATCH 37/41] [MERGED] video: fbdev: omap: Make it CCF clk API compatible, Arnd Bergmann
  • [PATCH 36/41] usb: gadget: omap_udc: Make it CCF clk API compatible, Arnd Bergmann
  • [PATCH 34/41] ARM: OMAP1: clock: Remove noop code, Arnd Bergmann
  • [PATCH 35/41] usb: host: ohci-omap: Make it CCF clk API compatible, Arnd Bergmann
  • [PATCH 32/41] ARM: OMAP1: clock: Fix UART rate reporting algorithm, Arnd Bergmann
  • [PATCH 38/41] [MERGED] mmc: omap: Make it CCF clk API compatible, Arnd Bergmann
  • [PATCH 33/41] ARM: OMAP1: clock: Remove unused code, Arnd Bergmann
  • [PATCH 40/41] [TO BE REBASED] ARM: OMAP1: clock: Convert to CCF, Arnd Bergmann
    • Re: [PATCH 40/41] [TO BE REBASED] ARM: OMAP1: clock: Convert to CCF, Tony Lindgren
  • [PATCH 39/41] [MERGED] ASoC: ti: osk5912: Make it CCF clk API compatible, Arnd Bergmann
  • [PATCH 41/41] [TO BE REBASED] ARM: omap1: enable multiplatform, Arnd Bergmann
  • Re: [PATCH 00/41] OMAP1 full multiplatform conversion, Ulf Hansson
    • Re: [PATCH 00/41] OMAP1 full multiplatform conversion, Tony Lindgren
  • Re: [PATCH 00/41] OMAP1 full multiplatform conversion, Aaro Koskinen
    • Re: [PATCH 00/41] OMAP1 full multiplatform conversion, Arnd Bergmann
      • Re: [PATCH 00/41] OMAP1 full multiplatform conversion, Aaro Koskinen
        • Re: [PATCH 00/41] OMAP1 full multiplatform conversion, Arnd Bergmann
• [PATCH V3 0/3] serial: stm32: add earlycon and polling mode, Valentin Caron
  • [PATCH V3 1/3] serial: stm32: remove infinite loop possibility in putchar function, Valentin Caron
    • Re: [PATCH V3 1/3] serial: stm32: remove infinite loop possibility in putchar function, Geert Uytterhoeven
      • Re: [PATCH V3 1/3] serial: stm32: remove infinite loop possibility in putchar function, Valentin CARON
  • [PATCH V3 3/3] serial: stm32: add earlycon support, Valentin Caron
  • [PATCH V3 2/3] serial: stm32: add KGDB support, Valentin Caron
• RE: [PATCH 19/20] tty: n_gsm: fix wrong behavior of gsm_carrier_raised() on debug, Starke, Daniel
• [PATCH] Documentation: fix tty link, Jiri Slaby
• RE: [PATCH 16/20] tty: n_gsm: fix invalid command/response bit check for UI/UIH frames, Starke, Daniel
  • Re: [PATCH 16/20] tty: n_gsm: fix invalid command/response bit check for UI/UIH frames, Greg KH
• [PATCH v5 0/5] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs, Maciej W. Rozycki
  • [PATCH v5 1/5] serial: 8250: Also set sticky MCR bits in console restoration, Maciej W. Rozycki
  • [PATCH v5 2/5] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device, Maciej W. Rozycki
  • [PATCH v5 3/5] serial: 8250: Fold EndRun device support into OxSemi Tornado code, Maciej W. Rozycki
  • [PATCH v5 4/5] serial: 8250: Export ICR access helpers for internal use, Maciej W. Rozycki
  • [PATCH v5 5/5] serial: 8250: Add proper clock handling for OxSemi PCIe devices, Maciej W. Rozycki
• [PATCH 4.9 116/218] kgdboc: fix return value of __setup handler, Greg Kroah-Hartman
• [PATCH 4.14 145/284] kgdboc: fix return value of __setup handler, Greg Kroah-Hartman
• [PATCH] tty: serdev: using pm_runtime_resume_and_get instead of pm_runtime_get_sync, cgel . zte
  • Re: [PATCH] tty: serdev: using pm_runtime_resume_and_get instead of pm_runtime_get_sync, Jiri Slaby
  • Re: [PATCH] tty: serdev: using pm_runtime_resume_and_get instead of pm_runtime_get_sync, Johan Hovold
• [PATCH] Revert "serial: sc16is7xx: Clear RS485 bits in the shutdown", Hui Wang
• [PATCH V2 0/2] Add q 12MHz internal clock rate to calculate, Yu Tu
  • [PATCH V2 2/2] tty: serial: meson: Added S4 SOC compatibility, Yu Tu
    • Re: [PATCH V2 2/2] tty: serial: meson: Added S4 SOC compatibility, Neil Armstrong
      • Re: [PATCH V2 2/2] tty: serial: meson: Added S4 SOC compatibility, Yu Tu
  • [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Yu Tu
    • Re: [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Andy Shevchenko
      • Re: [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Yu Tu
        • Re: [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Jiri Slaby
          • Re: [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Andy Shevchenko
            • Re: [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Neil Armstrong
          • Re: [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Yu Tu
      • Re: [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Neil Armstrong
        • Re: [PATCH V2 1/2] tty: serial: meson: Add a 12MHz internal clock rate to calculate baud rate in order to meet the baud rate requirements of special BT modules, Yu Tu
• [PATCH] tty: serial: fsl_lpuart: remove the count initialization as it is not needed, Sherry Sun
  • Re: [PATCH] tty: serial: fsl_lpuart: remove the count initialization as it is not needed, Jiri Slaby
• [PATCH v4 0/5] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs, Maciej W. Rozycki
  • [PATCH v4 1/5] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device, Maciej W. Rozycki
    • Re: [PATCH v4 1/5] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device, Andy Shevchenko
  • [PATCH v4 2/5] serial: 8250: Fold EndRun device support into OxSemi Tornado code, Maciej W. Rozycki
    • Re: [PATCH v4 2/5] serial: 8250: Fold EndRun device support into OxSemi Tornado code, Andy Shevchenko
  • [PATCH v4 3/5] serial: 8250: Export ICR access helpers for internal use, Maciej W. Rozycki
    • Re: [PATCH v4 3/5] serial: 8250: Export ICR access helpers for internal use, Andy Shevchenko
      • Re: [PATCH v4 3/5] serial: 8250: Export ICR access helpers for internal use, Maciej W. Rozycki
  • [PATCH v4 4/5] serial: 8250: Also set sticky MCR bits in console restoration, Maciej W. Rozycki
    • Re: [PATCH v4 4/5] serial: 8250: Also set sticky MCR bits in console restoration, Andy Shevchenko
      • Re: [PATCH v4 4/5] serial: 8250: Also set sticky MCR bits in console restoration, Maciej W. Rozycki
  • [PATCH v4 5/5] serial: 8250: Add proper clock handling for OxSemi PCIe devices, Maciej W. Rozycki
    • Re: [PATCH v4 5/5] serial: 8250: Add proper clock handling for OxSemi PCIe devices, Andy Shevchenko
      • Re: [PATCH v4 5/5] serial: 8250: Add proper clock handling for OxSemi PCIe devices, Maciej W. Rozycki
• [PATCH V2] drivers: tty: serial: Fix deadlock in sa1100_set_termios(), Duoming Zhou
• [tty:tty-testing] BUILD SUCCESS f398e0aa325c61fa20903833a5b534ecb8e6e418, kernel test robot
• [tty:tty-linus] BUILD SUCCESS cc994bb97587787b8f0c094a9bc6945d82075b1d, kernel test robot
• [tty:tty-next] BUILD SUCCESS 9c3a431a486d0c494a68941045885333a5bc1975, kernel test robot
• [PATCH 5.4 256/475] kgdboc: fix return value of __setup handler, Greg Kroah-Hartman
• [PATCH 4.19 177/338] kgdboc: fix return value of __setup handler, Greg Kroah-Hartman
• [PATCH 01/20] tty: n_gsm: fix missing mux reset on config change at responder, D. Starke
  • [PATCH 02/20] tty: n_gsm: fix restart handling via CLD command, D. Starke
  • [PATCH 03/20] tty: n_gsm: fix decoupled mux resource, D. Starke
  • [PATCH 05/20] tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2, D. Starke
  • [PATCH 04/20] tty: n_gsm: fix mux cleanup after unregister tty device, D. Starke
  • [PATCH 07/20] tty: n_gsm: fix malformed counter for out of frame data, D. Starke
  • [PATCH 08/20] tty: n_gsm: fix insufficient txframe size, D. Starke
  • [PATCH 06/20] tty: n_gsm: fix frame reception handling, D. Starke
  • [PATCH 09/20] tty: n_gsm: fix wrong DLCI release order, D. Starke
  • [PATCH 11/20] tty: n_gsm: fix wrong command retry handling, D. Starke
  • [PATCH 13/20] tty: n_gsm: fix wrong signal octets encoding in MSC, D. Starke
  • [PATCH 10/20] tty: n_gsm: fix missing explicit ldisc flush, D. Starke
  • [PATCH 12/20] tty: n_gsm: fix wrong command frame length field encoding, D. Starke
  • [PATCH 16/20] tty: n_gsm: fix invalid command/response bit check for UI/UIH frames, D. Starke
    • Re: [PATCH 16/20] tty: n_gsm: fix invalid command/response bit check for UI/UIH frames, Greg KH
      • [PATCH v2 16/20] tty: n_gsm: clean up dead code in gsm_queue(), D. Starke
        • Re: [PATCH v2 16/20] tty: n_gsm: clean up dead code in gsm_queue(), Greg KH
        • Re: [PATCH v2 16/20] tty: n_gsm: clean up dead code in gsm_queue(), Greg KH
  • [PATCH 14/20] tty: n_gsm: fix missing tty wakeup in convergence layer type 2, D. Starke
  • [PATCH 15/20] tty: n_gsm: fix missing update of modem controls after DLCI open, D. Starke
    • Re: [PATCH 15/20] tty: n_gsm: fix missing update of modem controls after DLCI open, Greg KH
      • [PATCH v2 15/20] tty: n_gsm: fix missing update of modem controls after DLCI open, D. Starke
        • Re: [PATCH v2 15/20] tty: n_gsm: fix missing update of modem controls after DLCI open, Greg KH
  • [PATCH 17/20] tty: n_gsm: fix reset fifo race condition, D. Starke
  • [PATCH 19/20] tty: n_gsm: fix wrong behavior of gsm_carrier_raised() on debug, D. Starke
    • Re: [PATCH 19/20] tty: n_gsm: fix wrong behavior of gsm_carrier_raised() on debug, Greg KH
  • [PATCH 18/20] tty: n_gsm: fix implicit CR bit encoding in address field, D. Starke
    • Re: [PATCH 18/20] tty: n_gsm: fix implicit CR bit encoding in address field, Greg KH
      • [PATCH v2 18/20] tty: n_gsm: clean up implicit CR bit encoding in address field, D. Starke
        • Re: [PATCH v2 18/20] tty: n_gsm: clean up implicit CR bit encoding in address field, Greg KH
  • [PATCH 20/20] tty: n_gsm: fix incorrect UA handling, D. Starke
• [PATCH v5 00/11] serial: 8250: dw: RZN1 DMA support, Miquel Raynal
  • [PATCH v5 01/11] serial: 8250: dw: Move definitions to the shared header, Miquel Raynal
  • [PATCH v5 02/11] serial: 8250: dw: Use the device API, Miquel Raynal
  • [PATCH v5 10/11] serial: 8250: dw: Improve RZN1 support, Miquel Raynal
  • [PATCH v5 05/11] serial: 8250: dw: Allow to use a fallback CPR value if not synthesized, Miquel Raynal
    • Re: [PATCH v5 05/11] serial: 8250: dw: Allow to use a fallback CPR value if not synthesized, Andy Shevchenko
  • [PATCH v5 03/11] serial: 8250: dw: Create a more generic platform data structure, Miquel Raynal
  • [PATCH v5 06/11] serial: 8250: dma: Allow driver operations before starting DMA transfers, Miquel Raynal
  • [PATCH v5 08/11] serial: 8250: dw: Move the IO accessors to 8250_dwlib.h, Miquel Raynal
    • Re: [PATCH v5 08/11] serial: 8250: dw: Move the IO accessors to 8250_dwlib.h, Andy Shevchenko
  • [PATCH v5 07/11] serial: 8250: dw: Introduce an rx_timeout variable in the IRQ path, Miquel Raynal
  • [PATCH v5 04/11] serial: 8250: dw: Move the USR register to pdata, Miquel Raynal
    • Re: [PATCH v5 04/11] serial: 8250: dw: Move the USR register to pdata, Andy Shevchenko
  • [PATCH v5 09/11] serial: 8250: dw: Add support for DMA flow controlling devices, Miquel Raynal
    • Re: [PATCH v5 09/11] serial: 8250: dw: Add support for DMA flow controlling devices, Andy Shevchenko
  • [PATCH v5 11/11] ARM: dts: r9a06g032: Fill the UART DMA properties, Miquel Raynal
  • Re: [PATCH v5 00/11] serial: 8250: dw: RZN1 DMA support, Greg Kroah-Hartman
    • Re: [PATCH v5 00/11] serial: 8250: dw: RZN1 DMA support, Miquel Raynal
      • Re: [PATCH v5 00/11] serial: 8250: dw: RZN1 DMA support, Miquel Raynal
• [PATCH] serial: core: Start managing serial controllers to enable runtime PM, Tony Lindgren
  • Re: [PATCH] serial: core: Start managing serial controllers to enable runtime PM, Andy Shevchenko
    • Re: [PATCH] serial: core: Start managing serial controllers to enable runtime PM, Tony Lindgren
    • Re: [PATCH] serial: core: Start managing serial controllers to enable runtime PM, Tony Lindgren
• [PATCHv2] serial: 8250: Fix runtime PM for start_tx() for empty buffer, Tony Lindgren
  • Re: [PATCHv2] serial: 8250: Fix runtime PM for start_tx() for empty buffer, Johan Hovold
  • Re: [PATCHv2] serial: 8250: Fix runtime PM for start_tx() for empty buffer, Uwe Kleine-König
• [PATCH 0/6] tty: Documentation moves and updates., Jiri Slaby
  • [PATCH 1/6] Documentation: move tty to driver-api, Jiri Slaby
  • [PATCH 2/6] Documentation: tty: introduce "Other Documentation", Jiri Slaby
  • [PATCH 4/6] Documentation: tty: move moxa-smartio.rst to tty, Jiri Slaby
  • [PATCH 3/6] Documentation: tty: move n_gsm to tty, Jiri Slaby
  • [PATCH 6/6] Documentation: tty: n_gsm, use power of ReST, Jiri Slaby
  • [PATCH 5/6] Documentation: tty: n_gsm, delete "Additional Documentation", Jiri Slaby
• [PATCH 0/3] tty: TX helpers, Jiri Slaby
  • [PATCH 2/3] tty: serial: use uart_port_tx() helper, Jiri Slaby
  • [PATCH 1/3] tty: serial: introduce uart_port_tx{,_limit}() helpers, Jiri Slaby
    • Re: [PATCH 1/3] tty: serial: introduce uart_port_tx{,_limit}() helpers, Greg KH
      • Re: [PATCH 1/3] tty: serial: introduce uart_port_tx{,_limit}() helpers, Jiri Slaby
        • Re: [PATCH 1/3] tty: serial: introduce uart_port_tx{,_limit}() helpers, Greg KH
  • [PATCH 3/3] tty: serial: use uart_port_tx_limit() helper, Jiri Slaby
    • Re: [PATCH 3/3] tty: serial: use uart_port_tx_limit() helper, Pali Rohár
      • Re: [PATCH 3/3] tty: serial: use uart_port_tx_limit() helper, Jiri Slaby
        • Re: [PATCH 3/3] tty: serial: use uart_port_tx_limit() helper, Pali Rohár
• [PATCH 0/3] tty: various cleanups, Jiri Slaby
  • [PATCH 1/3] tty: serial: mpc52xx_uart: remove double ifdeffery, Jiri Slaby
  • [PATCH 3/3] tty: serial: altera: use altera_jtaguart_stop_tx(), Jiri Slaby
    • Re: [PATCH 3/3] tty: serial: altera: use altera_jtaguart_stop_tx(), Tobias Klauser
  • [PATCH 2/3] tty: serial: owl-uart, send x_char even if stopped, Jiri Slaby
• [PATCH v3 0/5] tty/serial: Process XON/XOFF robustly, Ilpo Järvinen
  • [PATCH v3 2/5] tty: Simplify receive flow control char logic, Ilpo Järvinen
    • Re: [PATCH v3 2/5] tty: Simplify receive flow control char logic, Greg KH
  • [PATCH v3 3/5] tty: Add lookahead param to receive_buf, Ilpo Järvinen
    • Re: [PATCH v3 3/5] tty: Add lookahead param to receive_buf, Greg KH
      • Re: [PATCH v3 3/5] tty: Add lookahead param to receive_buf, Ilpo Järvinen
        • Re: [PATCH v3 3/5] tty: Add lookahead param to receive_buf, Ilpo Järvinen
          • Re: [PATCH v3 3/5] tty: Add lookahead param to receive_buf, Greg KH
  • [PATCH v3 1/5] tty: Add function for handling flow control chars, Ilpo Järvinen
  • [PATCH v3 4/5] tty: Implement lookahead to process XON/XOFF timely, Ilpo Järvinen
  • [PATCH v3 5/5] tty: Use flow-control char function on closing path, Ilpo Järvinen
    • Re: [PATCH v3 5/5] tty: Use flow-control char function on closing path, Andy Shevchenko
• [PATCH 1/2] serial: 8250: Fix runtime PM for start_tx() for RS485, Tony Lindgren
  • [PATCH 2/2] serial: 8250: Fix runtime PM for start_tx() for empty buffer, Tony Lindgren
    • Re: [PATCH 2/2] serial: 8250: Fix runtime PM for start_tx() for empty buffer, Uwe Kleine-König
      • Re: [PATCH 2/2] serial: 8250: Fix runtime PM for start_tx() for empty buffer, Tony Lindgren
    • Re: [PATCH 2/2] serial: 8250: Fix runtime PM for start_tx() for empty buffer, Johan Hovold
      • Re: [PATCH 2/2] serial: 8250: Fix runtime PM for start_tx() for empty buffer, Tony Lindgren
  • Re: [PATCH 1/2] serial: 8250: Fix runtime PM for start_tx() for RS485, Johan Hovold