Use UART_LCR_DLAB instead of literal. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> --- drivers/tty/serial/8250/8250_pericom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c index 95ff10f25d58..b8d5b7714a9d 100644 --- a/drivers/tty/serial/8250/8250_pericom.c +++ b/drivers/tty/serial/8250/8250_pericom.c @@ -73,7 +73,7 @@ static void pericom_do_set_divisor(struct uart_port *port, unsigned int baud, struct uart_8250_port *up = up_to_u8250p(port); int lcr = serial_port_in(port, UART_LCR); - serial_port_out(port, UART_LCR, lcr | 0x80); + serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB); serial_dl_write(up, divisor); serial_port_out(port, 2, 16 - scr); serial_port_out(port, UART_LCR, lcr); -- 2.30.2
