Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23/05/2022 16:22, Geert Uytterhoeven wrote:
> Hi Tomer,
> 
> On Mon, May 23, 2022 at 4:03 PM Tomer Maimon <tmaimon77@xxxxxxxxx> wrote:
>> On Mon, 23 May 2022 at 12:01, Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>> On 22/05/2022 17:50, Tomer Maimon wrote:
>>>> Add binding document and device tree binding
>>>> constants for Nuvoton BMC NPCM8XX reset controller.
>>>>
>>>> Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> 
>>>> --- /dev/null
>>>> +++ b/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
>>>> @@ -0,0 +1,124 @@
>>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>>> +// Copyright (c) 2022 Nuvoton Technology corporation.
>>>> +
>>>> +#ifndef _DT_BINDINGS_NPCM8XX_RESET_H
>>>> +#define _DT_BINDINGS_NPCM8XX_RESET_H
>>>> +
>>>> +#define NPCM8XX_RESET_IPSRST1                0x20
>>>> +#define NPCM8XX_RESET_IPSRST2                0x24
>>>> +#define NPCM8XX_RESET_IPSRST3                0x34
>>>> +#define NPCM8XX_RESET_IPSRST4                0x74
>>>
>>> What are these? All IDs should be incremental, decimal and start from 0.
>>
>> Register offset, we use the same method in NPCM7xx. please refer
>> https://elixir.bootlin.com/linux/v5.18/source/include/dt-bindings/reset/nuvoton,npcm7xx-reset.h
>>
>> and the driver asserts the reset according to the reset include definitions
> 
> So if they're easy to look up the values, you could do without the
> definitions? Cfr. the interrupts properties in .dtsi files, where we
> typically just use the hardcoded numbers.
> 
> If you do decide to keep them, a comment explaining their origins
> would be useful.
> 
>>>> +
>>>> +/* Reset lines on IP1 reset module (NPCM8XX_RESET_IPSRST1) */
>>>> +#define NPCM8XX_RESET_GDMA0          3
>>>
>>> IDs start from 0 and do not have holes.
>>
>> This represents the reset BIT in the reset register.
> 
> Likewise, I think it's a good idea to document that in a comment, cfr.
> https://elixir.bootlin.com/linux/v5.18/source/include/dt-bindings/power/r8a7795-sysc.h#L8

Renesas is also doing it not correct (just like many others). The
bindings are not for register bits or offsets. Such data can be DTS but
not part of bindings. Imagine now you made mistake in this register
offset and hardware uses slightly different value. What now? Change
bindings? No. Bindings hold here ID, the abstraction, and ID stays fixed.


Best regards,
Krzysztof



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux