From: Daniel Starke <daniel.starke@xxxxxxxxxxx>
1) The function drains the fifo for the given user tty/DLCI without
considering 'TX_THRESH_HI' and different to gsm_dlci_data_output_framed(),
which moves only one packet from the user side to the internal transmission
queue. We can only handle one packet at a time here if we want to allow
DLCI priority handling in gsm_dlci_data_sweep() to avoid link starvation.
2) Furthermore, the additional header octet from convergence layer type 2
is not counted against MTU. It is part of the UI/UIH frame message which
needs to be limited to MTU. Hence, it is wrong not to consider this octet.
3) Finally, the waiting user tty is not informed about freed space in its
send queue.
Take at most one packet worth of data out of the DLCI fifo to fix 1).
Limit the max user data size per packet to MTU - 1 in case of convergence
layer type 2 to leave space for the control signal octet which is added in
the later part of the function. This fixes 2).
Add tty_port_tty_wakeup() to wake up the user tty if new write space has
been made available to fix 3).
Fixes: 268e526b935e ("tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Daniel Starke <daniel.starke@xxxxxxxxxxx>
---
drivers/tty/n_gsm.c | 74 +++++++++++++++++++++++++--------------------
1 file changed, 42 insertions(+), 32 deletions(-)
There have been no comments on v2, hence, no change was done.
Link: https://lore.kernel.org/all/20220519070757.2096-3-daniel.starke@xxxxxxxxxxx/
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 9b0bbd0d35d0..b51e2023d88d 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -869,41 +869,51 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
{
struct gsm_msg *msg;
u8 *dp;
- int len, total_size, size;
- int h = dlci->adaption - 1;
+ int h, len, size;
- total_size = 0;
- while (1) {
- len = kfifo_len(&dlci->fifo);
- if (len == 0)
- return total_size;
-
- /* MTU/MRU count only the data bits */
- if (len > gsm->mtu)
- len = gsm->mtu;
-
- size = len + h;
-
- msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
- /* FIXME: need a timer or something to kick this so it can't
- get stuck with no work outstanding and no buffer free */
- if (msg == NULL)
- return -ENOMEM;
- dp = msg->data;
- switch (dlci->adaption) {
- case 1: /* Unstructured */
- break;
- case 2: /* Unstructed with modem bits.
- Always one byte as we never send inline break data */
- *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
- break;
- }
- WARN_ON(kfifo_out_locked(&dlci->fifo, dp , len, &dlci->lock) != len);
- __gsm_data_queue(dlci, msg);
- total_size += size;
+ /* for modem bits without break data */
+ h = ((dlci->adaption == 1) ? 0 : 1);
+
+ len = kfifo_len(&dlci->fifo);
+ if (len == 0)
+ return 0;
+
+ /* MTU/MRU count only the data bits but watch adaption mode */
+ if ((len + h) > gsm->mtu)
+ len = gsm->mtu - h;
+
+ size = len + h;
+
+ msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+ /* FIXME: need a timer or something to kick this so it can't
+ * get stuck with no work outstanding and no buffer free
+ */
+ if (!msg)
+ return -ENOMEM;
+ dp = msg->data;
+ switch (dlci->adaption) {
+ case 1: /* Unstructured */
+ break;
+ case 2: /* Unstructured with modem bits.
+ * Always one byte as we never send inline break data
+ */
+ *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
+ break;
+ default:
+ pr_err("%s: unsupported adaption %d\n", __func__,
+ dlci->adaption);
+ break;
}
+
+ WARN_ON(len != kfifo_out_locked(&dlci->fifo, dp, len,
+ &dlci->lock));
+
+ /* Notify upper layer about available send space. */
+ tty_port_tty_wakeup(&dlci->port);
+
+ __gsm_data_queue(dlci, msg);
/* Bytes of data we used up */
- return total_size;
+ return size;
}
/**
--
2.34.1
