Linux SCSI Development

• Date Index

• Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, (continued)
  • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, John Garry
    • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, Damien Le Moal
    • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, Christoph Hellwig
      • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, Yihang Li
        • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, Damien Le Moal
          • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, Christoph Hellwig
            • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, Damien Le Moal
              • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, Christoph Hellwig
                • Re: [PATCH v2] scsi: libsas: Allocation SMP request is aligned to ARCH_DMA_MINALIGN, Yihang Li
• [PATCH 0/2] Remove support for legacy UFS, Avri Altman
  • [PATCH 1/2] scsi: ufs: Remove support for old UFSHCI versions, Avri Altman
    • Re: [PATCH 1/2] scsi: ufs: Remove support for old UFSHCI versions, Bart Van Assche
      • Re: [PATCH 1/2] scsi: ufs: Remove support for old UFSHCI versions, Christoph Hellwig
        • RE: [PATCH 1/2] scsi: ufs: Remove support for old UFSHCI versions, Avri Altman
      • RE: [PATCH 1/2] scsi: ufs: Remove support for old UFSHCI versions, Avri Altman
  • [PATCH 2/2] scsi: ufs: Remove legacy tuning calls, Avri Altman
• [PATCH 0/2] Improve the code for showing commands in debugfs, Bart Van Assche
  • [PATCH 2/2] scsi: core: Improve the code for showing commands in debugfs, Bart Van Assche
  • [PATCH 1/2] scsi: core: Introduce scsi_cmd_list_info(), Bart Van Assche
  • Re: [PATCH 0/2] Improve the code for showing commands in debugfs, Bart Van Assche
  • Re: [PATCH 0/2] Improve the code for showing commands in debugfs, Martin K. Petersen
• [PATCH] scsi: mpi3mr: Reduce stack usage, Bart Van Assche
  • Re: [PATCH] scsi: mpi3mr: Reduce stack usage, Bart Van Assche
  • Re: [PATCH] scsi: mpi3mr: Reduce stack usage, Martin K. Petersen
• [PATCH] scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING, Bart Van Assche
  • Re: [PATCH] scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING, Bart Van Assche
• [Bug] UBSAN: shift-out-of-bounds in sg_build_indirect, Sam Sun
  • Re: [Bug] UBSAN: shift-out-of-bounds in sg_build_indirect, Sam Sun
    • Re: [Bug] UBSAN: shift-out-of-bounds in sg_build_indirect, Bart Van Assche
      • Re: [Bug] UBSAN: shift-out-of-bounds in sg_build_indirect, Sam Sun
        • Re: [Bug] UBSAN: shift-out-of-bounds in sg_build_indirect, Bart Van Assche
          • Re: [Bug] UBSAN: shift-out-of-bounds in sg_build_indirect, Sam Sun
• [PATCH] scsi: libsas: Add SMP request allocation handler callback, Yihang Li
  • Re: [PATCH] scsi: libsas: Add SMP request allocation handler callback, Damien Le Moal
    • Re: [PATCH] scsi: libsas: Add SMP request allocation handler callback, Jason Yan
      • Re: [PATCH] scsi: libsas: Add SMP request allocation handler callback, John Garry
      • Re: [PATCH] scsi: libsas: Add SMP request allocation handler callback, Yihang Li
• [PATCH] scsi: 53c700: call NCR_700_internal_bus_reset() unconditionally, Alexandra Diupina
• [PATCH v2 00/28] Zone write plugging, Damien Le Moal
  • [PATCH v2 03/28] block: Introduce blk_zone_update_request_bio(), Damien Le Moal
    • Re: [PATCH v2 03/28] block: Introduce blk_zone_update_request_bio(), Bart Van Assche
      • Re: [PATCH v2 03/28] block: Introduce blk_zone_update_request_bio(), Damien Le Moal
        • Re: [PATCH v2 03/28] block: Introduce blk_zone_update_request_bio(), Christoph Hellwig
          • Re: [PATCH v2 03/28] block: Introduce blk_zone_update_request_bio(), Damien Le Moal
    • Re: [PATCH v2 03/28] block: Introduce blk_zone_update_request_bio(), Hannes Reinecke
  • [PATCH v2 04/28] block: Introduce bio_straddle_zones() and bio_offset_from_zone_start(), Damien Le Moal
    • Re: [PATCH v2 04/28] block: Introduce bio_straddle_zones() and bio_offset_from_zone_start(), Bart Van Assche
    • Re: [PATCH v2 04/28] block: Introduce bio_straddle_zones() and bio_offset_from_zone_start(), Christoph Hellwig
  • [PATCH v2 05/28] block: Allow using bio_attempt_back_merge() internally, Damien Le Moal
    • Re: [PATCH v2 05/28] block: Allow using bio_attempt_back_merge() internally, Bart Van Assche
    • Re: [PATCH v2 05/28] block: Allow using bio_attempt_back_merge() internally, Christoph Hellwig
  • [PATCH v2 02/28] block: Remove req_bio_endio(), Damien Le Moal
    • Re: [PATCH v2 02/28] block: Remove req_bio_endio(), Bart Van Assche
      • Re: [PATCH v2 02/28] block: Remove req_bio_endio(), Damien Le Moal
  • [PATCH v2 12/28] block: Allow BIO-based drivers to use blk_revalidate_disk_zones(), Damien Le Moal
    • Re: [PATCH v2 12/28] block: Allow BIO-based drivers to use blk_revalidate_disk_zones(), Christoph Hellwig
      • Re: [PATCH v2 12/28] block: Allow BIO-based drivers to use blk_revalidate_disk_zones(), Damien Le Moal
    • Re: [PATCH v2 12/28] block: Allow BIO-based drivers to use blk_revalidate_disk_zones(), Hannes Reinecke
  • [PATCH v2 08/28] block: Use a mempool to allocate zone write plugs, Damien Le Moal
    • Re: [PATCH v2 08/28] block: Use a mempool to allocate zone write plugs, Hannes Reinecke
      • Re: [PATCH v2 08/28] block: Use a mempool to allocate zone write plugs, Damien Le Moal
  • [PATCH v2 17/28] null_blk: Introduce zone_append_max_sectors attribute, Damien Le Moal
    • Re: [PATCH v2 17/28] null_blk: Introduce zone_append_max_sectors attribute, Hannes Reinecke
  • [PATCH v2 13/28] dm: Use the block layer zone append emulation, Damien Le Moal
  • [PATCH v2 09/28] block: Fake max open zones limit when there is no limit, Damien Le Moal
    • Re: [PATCH v2 09/28] block: Fake max open zones limit when there is no limit, Christoph Hellwig
    • Re: [PATCH v2 09/28] block: Fake max open zones limit when there is no limit, Hannes Reinecke
  • [PATCH v2 06/28] block: Remember zone capacity when revalidating zones, Damien Le Moal
    • Re: [PATCH v2 06/28] block: Remember zone capacity when revalidating zones, Bart Van Assche
      • Re: [PATCH v2 06/28] block: Remember zone capacity when revalidating zones, Damien Le Moal
    • Re: [PATCH v2 06/28] block: Remember zone capacity when revalidating zones, Christoph Hellwig
    • Re: [PATCH v2 06/28] block: Remember zone capacity when revalidating zones, Hannes Reinecke
  • [PATCH v2 10/28] block: Allow zero value of max_zone_append_sectors queue limit, Damien Le Moal
  • [PATCH v2 07/28] block: Introduce zone write plugging, Damien Le Moal
    • Re: [PATCH v2 07/28] block: Introduce zone write plugging, Bart Van Assche
      • Re: [PATCH v2 07/28] block: Introduce zone write plugging, Damien Le Moal
        • Re: [PATCH v2 07/28] block: Introduce zone write plugging, Christoph Hellwig
        • Re: [PATCH v2 07/28] block: Introduce zone write plugging, Bart Van Assche
    • Re: [PATCH v2 07/28] block: Introduce zone write plugging, Hannes Reinecke
  • [PATCH v2 20/28] block: Remove BLK_STS_ZONE_RESOURCE, Damien Le Moal
    • Re: [PATCH v2 20/28] block: Remove BLK_STS_ZONE_RESOURCE, Christoph Hellwig
  • [PATCH v2 28/28] block: Do not special-case plugging of zone write operations, Damien Le Moal
  • [PATCH v2 23/28] block: Remove elevator required features, Damien Le Moal
    • Re: [PATCH v2 23/28] block: Remove elevator required features, Christoph Hellwig
  • [PATCH v2 26/28] block: Remove zone write locking, Damien Le Moal
    • Re: [PATCH v2 26/28] block: Remove zone write locking, Bart Van Assche
    • Re: [PATCH v2 26/28] block: Remove zone write locking, Hannes Reinecke
  • [PATCH v2 27/28] block: Do not force select mq-deadline with CONFIG_BLK_DEV_ZONED, Damien Le Moal
    • Re: [PATCH v2 27/28] block: Do not force select mq-deadline with CONFIG_BLK_DEV_ZONED, Bart Van Assche
    • Re: [PATCH v2 27/28] block: Do not force select mq-deadline with CONFIG_BLK_DEV_ZONED, Hannes Reinecke
  • [PATCH v2 24/28] block: Do not check zone type in blk_check_zone_append(), Damien Le Moal
    • Re: [PATCH v2 24/28] block: Do not check zone type in blk_check_zone_append(), Christoph Hellwig
  • [PATCH v2 25/28] block: Move zone related debugfs attribute to blk-zoned.c, Damien Le Moal
    • Re: [PATCH v2 25/28] block: Move zone related debugfs attribute to blk-zoned.c, Bart Van Assche
      • Re: [PATCH v2 25/28] block: Move zone related debugfs attribute to blk-zoned.c, Damien Le Moal
  • [PATCH v2 01/28] block: Restore sector of flush requests, Damien Le Moal
    • Re: [PATCH v2 01/28] block: Restore sector of flush requests, Bart Van Assche
    • Re: [PATCH v2 01/28] block: Restore sector of flush requests, Christoph Hellwig
  • [PATCH v2 11/28] block: Implement zone append emulation, Damien Le Moal
    • Re: [PATCH v2 11/28] block: Implement zone append emulation, Hannes Reinecke
  • [PATCH v2 16/28] null_blk: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature, Damien Le Moal
  • [PATCH v2 18/28] null_blk: Introduce fua attribute, Damien Le Moal
  • [PATCH v2 15/28] ublk_drv: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature, Damien Le Moal
  • [PATCH v2 19/28] nvmet: zns: Do not reference the gendisk conv_zones_bitmap, Damien Le Moal
    • Re: [PATCH v2 19/28] nvmet: zns: Do not reference the gendisk conv_zones_bitmap, Christoph Hellwig
  • [PATCH v2 22/28] block: mq-deadline: Remove support for zone write locking, Damien Le Moal
    • Re: [PATCH v2 22/28] block: mq-deadline: Remove support for zone write locking, Bart Van Assche
  • [PATCH v2 21/28] block: Simplify blk_revalidate_disk_zones() interface, Damien Le Moal
    • Re: [PATCH v2 21/28] block: Simplify blk_revalidate_disk_zones() interface, Christoph Hellwig
  • [PATCH v2 14/28] scsi: sd: Use the block layer zone append emulation, Damien Le Moal
• [PATCH 00/28] Remove PCI_IRQ_LEGACY, Damien Le Moal
  • [PATCH 10/28] drm: amdgpu: Use PCI_IRQ_INTX, Damien Le Moal
    • RE: [PATCH 10/28] drm: amdgpu: Use PCI_IRQ_INTX, Deucher, Alexander
  • [PATCH 14/28] net: xgbe: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 22/28] scsi: hpsa: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 04/28] sound: intel: Use PCI_IRQ_INTX, Damien Le Moal
    • Re: [PATCH 04/28] sound: intel: Use PCI_IRQ_INTX, Amadeusz Sławiński
      • Re: [PATCH 04/28] sound: intel: Use PCI_IRQ_INTX, Amadeusz Sławiński
  • [PATCH 26/28] scsi: pmcraid: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 07/28] platform: intel_ips: Use PCI_IRQ_INTX, Damien Le Moal
    • Re: [PATCH 07/28] platform: intel_ips: Use PCI_IRQ_INTX, Hans de Goede
  • [PATCH 28/28] PCI: Remove PCI_IRQ_LEGACY, Damien Le Moal
  • [PATCH 01/28] PCI: msi: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 15/28] net: aquantia atlantic: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 11/28] infiniband: qib: Use PCI_IRQ_INTX, Damien Le Moal
    • Re: [PATCH 11/28] infiniband: qib: Use PCI_IRQ_INTX, Dennis Dalessandro
  • [PATCH 08/28] ntb: Use PCI_IRQ_INTX, Damien Le Moal
    • Re: [PATCH 08/28] ntb: Use PCI_IRQ_INTX, Dave Jiang
  • [PATCH 21/28] scsi: arcmsr: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 23/28] scsi: ipr: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 18/28] net: wangxun: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 09/28] mfd: intel-lpss-pci: Use PCI_IRQ_INTX, Damien Le Moal
    • Re: [PATCH 09/28] mfd: intel-lpss-pci: Use PCI_IRQ_INTX, Andy Shevchenko
      • Re: [PATCH 09/28] mfd: intel-lpss-pci: Use PCI_IRQ_INTX, Bjorn Helgaas
        • Re: [PATCH 09/28] mfd: intel-lpss-pci: Use PCI_IRQ_INTX, Bjorn Helgaas
  • [PATCH 19/28] net: wireless: ath10k: Use references to INTX instead of LEGACY, Damien Le Moal
  • [PATCH 06/28] tty: 8250_pci: Use PCI_IRQ_INTX, Damien Le Moal
    • Re: [PATCH 06/28] tty: 8250_pci: Use PCI_IRQ_INTX, Greg Kroah-Hartman
  • [PATCH 02/28] PCI: portdrv: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 05/28] usb: hcd-pci: Use PCI_IRQ_INTX, Damien Le Moal
    • Re: [PATCH 05/28] usb: hcd-pci: Use PCI_IRQ_INTX, Greg Kroah-Hartman
  • [PATCH 20/28] net wireless; realtec: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 12/28] infiniband: vmw_pvrdma: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 03/28] PCI: documentation: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 27/28] scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY, Damien Le Moal
  • [PATCH 25/28] scsi: mpt3sas: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 24/28] scsi: megaraid: Use PCI_IRQ_INTX, Damien Le Moal
  • [PATCH 13/28] misc: vmci_guest: Use PCI_IRQ_ALL_TYPES, Damien Le Moal
    • Re: [PATCH 13/28] misc: vmci_guest: Use PCI_IRQ_ALL_TYPES, Greg Kroah-Hartman
  • [PATCH 17/28] net: realtek: r8169: Use PCI_IRQ_INTX, Damien Le Moal
    • Re: [PATCH 17/28] net: realtek: r8169: Use PCI_IRQ_INTX, Heiner Kallweit
  • [PATCH 16/28] net: atheros: alx: Use PCI_IRQ_INTX, Damien Le Moal
  • Re: [PATCH 00/28] Remove PCI_IRQ_LEGACY, Bjorn Helgaas
    • Re: [PATCH 00/28] Remove PCI_IRQ_LEGACY, Damien Le Moal
  • Re: [External] : [PATCH 00/28] Remove PCI_IRQ_LEGACY, Martin K. Petersen
• convert SCSI to atomic queue limits, part 1, Christoph Hellwig
  • [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun, Christoph Hellwig
    • Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun, Damien Le Moal
    • Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun, Bart Van Assche
    • Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun, John Garry
      • Re: [PATCH 09/23] scsi: use the atomic queue limits API in scsi_add_lun, Christoph Hellwig
  • [PATCH 14/23] hptiop: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 14/23] hptiop: switch to using ->device_configure, Damien Le Moal
  • [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template, Christoph Hellwig
    • Re: [PATCH 05/23] scsi_transport_fc: add a max_bsg_segments field to struct fc_function_template, Damien Le Moal
  • [PATCH 15/23] ipr: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 15/23] ipr: switch to using ->device_configure, Damien Le Moal
  • [PATCH 10/23] scsi: add a device_configure method to the host template, Christoph Hellwig
    • Re: [PATCH 10/23] scsi: add a device_configure method to the host template, Damien Le Moal
      • Re: [PATCH 10/23] scsi: add a device_configure method to the host template, Christoph Hellwig
    • Re: [PATCH 10/23] scsi: add a device_configure method to the host template, Bart Van Assche
      • Re: [PATCH 10/23] scsi: add a device_configure method to the host template, Christoph Hellwig
  • [PATCH 16/23] pmcraid: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 16/23] pmcraid: switch to using ->device_configure, Damien Le Moal
  • [PATCH 20/23] libata: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 20/23] libata: switch to using ->device_configure, Damien Le Moal
    • Re : [PATCH 20/23] libata: switch to using ->device_configure, John Garry
  • [PATCH 23/23] block: remove now unused queue limits helpers, Christoph Hellwig
    • Re: [PATCH 23/23] block: remove now unused queue limits helpers, Damien Le Moal
    • Re: [PATCH 23/23] block: remove now unused queue limits helpers, Bart Van Assche
    • Re : [PATCH 23/23] block: remove now unused queue limits helpers, John Garry
  • [PATCH 21/23] mpi3mr: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 21/23] mpi3mr: switch to using ->device_configure, Damien Le Moal
  • [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits, Christoph Hellwig
    • Re: [PATCH 22/23] uas: switch to using ->device_configure to configure queue limits, Damien Le Moal
  • [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method, Christoph Hellwig
    • Re: [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method, Damien Le Moal
    • Re: [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method, Bart Van Assche
    • RE: [PATCH 08/23] ufs-exynos: move setting the the dma alignment to the init method, Alim Akhtar
  • [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue, Christoph Hellwig
    • Re: [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue, Damien Le Moal
    • Re: [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue, Bart Van Assche
    • Re: [PATCH 02/23] bsg: pass queue_limits to bsg_setup_queue, John Garry
  • [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host, Christoph Hellwig
    • Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host, Damien Le Moal
      • Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host, Christoph Hellwig
    • Re: [PATCH 06/23] scsi: add a no_highmem flag to struct Scsi_Host, John Garry
  • [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue, Christoph Hellwig
    • Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue, Damien Le Moal
    • Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue, Bart Van Assche
    • Re: [PATCH 04/23] scsi: initialize scsi midlayer limits before allocating the queue, John Garry
  • [PATCH 01/23] block: don't reject too large max_user_setors in blk_validate_limits, Christoph Hellwig
    • Re: [PATCH 01/23] block: don't reject too large max_user_setors in blk_validate_limits, Damien Le Moal
    • Re: [PATCH 01/23] block: don't reject too large max_user_setors in blk_validate_limits, John Garry
  • [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue, Christoph Hellwig
    • Re: [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue, Damien Le Moal
    • Re: [PATCH 03/23] mpi3mr: pass queue_limits to bsg_setup_queue, John Garry
  • [PATCH 07/23] scsi: add a dma_alignment field to the host and host template, Christoph Hellwig
    • Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template, Damien Le Moal
    • Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template, Bart Van Assche
    • Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template, John Garry
      • Re: [PATCH 07/23] scsi: add a dma_alignment field to the host and host template, Christoph Hellwig
  • [PATCH 11/23] megaraid_sas: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 11/23] megaraid_sas: switch to using ->device_configure, Damien Le Moal
  • [PATCH 19/23] pata_macio: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 19/23] pata_macio: switch to using ->device_configure, Damien Le Moal
  • [PATCH 13/23] sbp2: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 13/23] sbp2: switch to using ->device_configure, Damien Le Moal
    • Re: [PATCH 13/23] sbp2: switch to using ->device_configure, Takashi Sakamoto
      • Re: [PATCH 13/23] sbp2: switch to using ->device_configure, Christoph Hellwig
  • [PATCH 18/23] sata_nv: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 18/23] sata_nv: switch to using ->device_configure, Damien Le Moal
  • [PATCH 17/23] usb-storage: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 17/23] usb-storage: switch to using ->device_configure, Damien Le Moal
  • [PATCH 12/23] mpt3sas: switch to using ->device_configure, Christoph Hellwig
    • Re: [PATCH 12/23] mpt3sas: switch to using ->device_configure, Damien Le Moal
• [PATCH v2] scsi: mpi3mr: Avoid memcpy field-spanning write WARNING, Shin'ichiro Kawasaki
  • Re: [PATCH v2] scsi: mpi3mr: Avoid memcpy field-spanning write WARNING, Martin K. Petersen
• [GIT PULL] SCSI postmerge updates for the 6.8+ merge window, James Bottomley
  • Re: [GIT PULL] SCSI postmerge updates for the 6.8+ merge window, Linus Torvalds
    • Re: [GIT PULL] SCSI postmerge updates for the 6.8+ merge window, James Bottomley
      • Re: [GIT PULL] SCSI postmerge updates for the 6.8+ merge window, Linus Torvalds
  • Re: [GIT PULL] SCSI postmerge updates for the 6.8+ merge window, pr-tracker-bot
• [PATCH] scsi: mpt3sas: complete function description, Deming Wang
  • <Possible follow-ups>
  • [PATCH] scsi: mpt3sas: complete function description, Deming Wang
• [PATCH] scsi: qla2xxx: indent help text, Prasad Pandit
  • Re: [PATCH] scsi: qla2xxx: indent help text, P J P
  • Re: [PATCH] scsi: qla2xxx: indent help text, Martin K. Petersen
• [bug report]debugfs: Directory 'target13:0:0' with parent 'scsi_debug' already present! observed during blktests block/001, Yi Zhang
• [PATCH] scsi: core: Make scsi_lib KUnit tests modular for real, Geert Uytterhoeven
  • Re: [PATCH] scsi: core: Make scsi_lib KUnit tests modular for real, Bart Van Assche
    • Re: [PATCH] scsi: core: Make scsi_lib KUnit tests modular for real, Geert Uytterhoeven
      • Re: [PATCH] scsi: core: Make scsi_lib KUnit tests modular for real, Bart Van Assche
        • Re: [PATCH] scsi: core: Make scsi_lib KUnit tests modular for real, Geert Uytterhoeven
          • Re: [PATCH] scsi: core: Make scsi_lib KUnit tests modular for real, Bart Van Assche
• [PATCH] scsi: sd: Fix TCG OPAL unlock on system resume, Damien Le Moal
  • Re: [PATCH] scsi: sd: Fix TCG OPAL unlock on system resume, Damien Le Moal
  • Re: [PATCH] scsi: sd: Fix TCG OPAL unlock on system resume, Martin K. Petersen
• blktests failures with v6.8 kernel, Shinichiro Kawasaki
  • Re: blktests failures with v6.8 kernel, Daniel Wagner
• [PATCH v2 01/25] scsi: aacraid: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 04/25] scsi: be2iscsi: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 05/25] scsi: fcoe: Convert sprintf() family to sysfs_emit() family (part 1), Li Zhijian
  • [PATCH v2 07/25] scsi: megaraid: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 09/25] scsi: pcmcia: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 13/25] scsi: hpsa: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 12/25] scsi: snic: Convert sprintf() family to sysfs_emit() family, Li Zhijian
    • RE: [PATCH v2 12/25] scsi: snic: Convert sprintf() family to sysfs_emit() family, Karan Tilak Kumar (kartilak)
  • [PATCH v2 16/25] scsi: myrb,myrs: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 10/25] scsi: qla4xxx: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 08/25] scsi: mpt3sas: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 18/25] scsi: pmcraid: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 14/25] scsi: hptiop: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 02/25] scsi: aic94xx: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 19/25] scsi: st: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 21/25] scsi: scsi_transport_fc: Convert sprintf() family to sysfs_emit() family (part 1), Li Zhijian
  • [PATCH v2 17/25] scsi: ncr53c8xx: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 20/25] scsi: core: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 23/25] scsi: scsi_transport_sas: Convert sprintf() family to sysfs_emit() family (part 1), Li Zhijian
  • [PATCH v2 11/25] scsi: smartpqi: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 06/25] scsi: fcoe: Convert sprintf() family to sysfs_emit() family (part 2), Li Zhijian
  • [PATCH v2 15/25] scsi: ipr: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 22/25] scsi: scsi_transport_fc: Convert sprintf() family to sysfs_emit() family (part 2), Li Zhijian
  • [PATCH v2 24/25] scsi: scsi_transport_sas: Convert sprintf() family to sysfs_emit() family (part 2), Li Zhijian
  • [PATCH v2 25/25] scsi: ibmvscsi: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • [PATCH v2 03/25] scsi: arcmsr: Convert sprintf() family to sysfs_emit() family, Li Zhijian
  • Re: (subset) [PATCH v2 01/25] scsi: aacraid: Convert sprintf() family to sysfs_emit() family, Martin K. Petersen
• [PATCH] scsi: target: core: replace deprecated strncpy with strscpy, Justin Stitt
  • Re: [PATCH] scsi: target: core: replace deprecated strncpy with strscpy, Kees Cook
    • Re: [PATCH] scsi: target: core: replace deprecated strncpy with strscpy, Kees Cook
• [PATCH] scsi: target: replace deprecated strncpy with strscpy, Justin Stitt
  • Re: [PATCH] scsi: target: replace deprecated strncpy with strscpy, Kees Cook
• [PATCH 1/2] iscsi_tcp: do not bind sockets that already have extra callbacks, Khazhismel Kumykov
  • [PATCH 2/2] iscsi_tcp: disallow binding the same connection twice, Khazhismel Kumykov
    • Re: [PATCH 2/2] iscsi_tcp: disallow binding the same connection twice, Mike Christie
      • Re: [PATCH 2/2] iscsi_tcp: disallow binding the same connection twice, Khazhy Kumykov
  • Re: [PATCH 1/2] iscsi_tcp: do not bind sockets that already have extra callbacks, Mike Christie
• [GIT PULL] SCSI updates for the 6.8+ merge window, James Bottomley
  • Re: [GIT PULL] SCSI updates for the 6.8+ merge window, pr-tracker-bot
• ida_alloc result as scsi host_no, Nikita Kiryushin
• [bug report] scsi: qla2xxx: Fix N2N stuck connection, Dan Carpenter
• [PATCH v2 0/7] ufs: host: mediatek: Provide features and fixes in MediaTek platforms, peter.wang
  • [PATCH v2 5/7] ufs: host: mediatek: rename host power control API, peter.wang
  • [PATCH v2 7/7] ufs: host: mediatek: support rtff in PM flow, peter.wang
  • [PATCH v2 2/7] ufs: host: mediatek: tx skew fix, peter.wang
  • [PATCH v2 1/7] ufs: host: mediatek: fix vsx/vccqx control logic, peter.wang
  • [PATCH v2 6/7] ufs: host: mediatek: support mphy reset, peter.wang
  • [PATCH v2 3/7] ufs: host: mediatek: Add UFS_MTK_CAP_DISABLE_MCQ, peter.wang
  • [PATCH v2 4/7] ufs: host: mediatek: ufs mtk sip command reconstruct, peter.wang
  • Re: [PATCH v2 0/7] ufs: host: mediatek: Provide features and fixes in MediaTek platforms, Martin K. Petersen
• [PATCH] bnx2fc: Remove spin_lock_bh while release resources after upload., Saurav Kashyap
  • Re: [PATCH] bnx2fc: Remove spin_lock_bh while release resources after upload., Martin K. Petersen
• [PATCH v2] scsi: message: fusion: Convert sprintf/snprintf to sysfs_emit, Li Zhijian
  • <Possible follow-ups>
  • [PATCH v2] scsi: message: fusion: Convert sprintf/snprintf to sysfs_emit, Li Zhijian
• [PATCH] scsi: core: Fix unremoved procfs host directory regression, Guilherme G. Piccoli
  • Re: [PATCH] scsi: core: Fix unremoved procfs host directory regression, Bart Van Assche
  • Re: [PATCH] scsi: core: Fix unremoved procfs host directory regression, Martin K. Petersen
• [PATCH v4 0/7] mpi3mr: Few Enhancements and minor fixes, Ranjan Kumar
  • [PATCH v4 1/7] mpi3mr: Block devices are not removed from OS even vd's are offlined, Ranjan Kumar
  • [PATCH v4 2/7] mpi3mr: Set MPI request flags appropriately, Ranjan Kumar
  • [PATCH v4 3/7] mpi3mr: Clear controller-wide flag that is used to block IOCTLS for the unresponsive controller, Ranjan Kumar
  • [PATCH v4 4/7] mpi3mr: Set the WriteSame Divert Capability in the IOCInit MPI Request, Ranjan Kumar
  • [PATCH v4 5/7] mpi3mr: Debug ability improvements, Ranjan Kumar
  • [PATCH v4 6/7] mpi3mr: Update MPI Headers to revision 31, Ranjan Kumar
  • [PATCH v4 7/7] mpi3mr: driver version upgrade to 8.8.1.0.50, Ranjan Kumar
  • Re: [PATCH v4 0/7] mpi3mr: Few Enhancements and minor fixes, Martin K. Petersen
• Re: [REGRESSION] Bug 218538 - 3cc2ffe5c16d from 6.6 breaks S3 resume on SATA SSD OPAL, Damien Le Moal
• [PATCH] scsi: hpsa: Fix allocation size for Scsi_Host private data, Yuri Karpov
  • Re: [PATCH] scsi: hpsa: Fix allocation size for Scsi_Host private data, Martin K. Petersen
• [drivers/scsi] Question about `st_setup`, Chenyuan Yang
  • Re: [drivers/scsi] Question about `st_setup`, "Kai Mäkisara (Kolumbus)"
• [PATCH v6 0/4] scsi: libsas: Fix the failure of adding phy with zero-address to port, Xingui Yang
  • [PATCH v6 4/4] scsi: libsas: Fix the failure of adding phy with zero-address to port, Xingui Yang
  • [PATCH v6 3/4] scsi: libsas: Set port when ex_phy is added or deleted, Xingui Yang
  • [PATCH v6 2/4] scsi: libsas: Move sas_add_parent_port() to sas_expander.c, Xingui Yang
  • [PATCH v6 1/4] scsi: libsas: Add helper for port add ex_phy, Xingui Yang
  • Re: [PATCH v6 0/4] scsi: libsas: Fix the failure of adding phy with zero-address to port, Martin K. Petersen
  • Re: [PATCH v6 0/4] scsi: libsas: Fix the failure of adding phy with zero-address to port, Martin K. Petersen
• [PATCH AUTOSEL 4.19 1/3] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready, Sasha Levin
• [PATCH AUTOSEL 5.4 2/4] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready, Sasha Levin
• [PATCH AUTOSEL 5.10 1/3] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready, Sasha Levin
• [PATCH AUTOSEL 5.15 1/5] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready, Sasha Levin
• [PATCH AUTOSEL 6.1 06/13] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready, Sasha Levin
• [PATCH AUTOSEL 6.6 08/17] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready, Sasha Levin
• [PATCH AUTOSEL 6.7 13/23] scsi: mpt3sas: Prevent sending diag_reset when the controller is ready, Sasha Levin
• [PATCH v1] scsi: megaraid: indent Kconfig option help text, Prasad Pandit
  • Re: [PATCH v1] scsi: megaraid: indent Kconfig option help text, P J P
    • Message not available
      • Re: [PATCH v1] scsi: megaraid: indent Kconfig option help text, Prasad Pandit
  • Re: [PATCH v1] scsi: megaraid: indent Kconfig option help text, Martin K. Petersen
• [PATCH] scsi: megaraid: fix MEGARAID_MAILBOX option help text, Prasad Pandit
• [PATCH v3 0/7] mpi3mr: Few Enhancements and minor fixes, Ranjan Kumar
  • [PATCH v3 1/7] mpi3mr: Block devices are not removed from OS even vd's are offlined, Ranjan Kumar
  • [PATCH v3 2/7] mpi3mr: Set MPI request flags appropriately, Ranjan Kumar
  • [PATCH v3 3/7] mpi3mr: Clear controller-wide flag that is used to block IOCTLS for the unresponsive controller, Ranjan Kumar
  • [PATCH v3 4/7] mpi3mr: Set the WriteSame Divert Capability in the IOCInit MPI Request, Ranjan Kumar
  • [PATCH v3 5/7] mpi3mr: Debug ability improvements, Ranjan Kumar
  • [PATCH v3 6/7] mpi3mr: Update MPI Headers to revision 31, Ranjan Kumar
  • [PATCH v3 7/7] mpi3mr: driver version upgrade to 8.8.1.0.50, Ranjan Kumar
• [PATCH] scsi: megaraid_sas: disabled shared host tagset feature by default, mengfanhui
  • Re: [PATCH] scsi: megaraid_sas: disabled shared host tagset feature by default, John Garry
    • Re: [PATCH] scsi: megaraid_sas: disabled shared host tagset feature by default, mengfanhui
• [PATCH RFC 0/2] scsi: scsi_debug: Allow parameter changes through sysfs, Shin'ichiro Kawasaki
  • [PATCH RFC 1/2] scsi: scsi_debug: Factor out initialization of size parameters, Shin'ichiro Kawasaki
    • Re: [PATCH RFC 1/2] scsi: scsi_debug: Factor out initialization of size parameters, Bart Van Assche
      • Re: [PATCH RFC 1/2] scsi: scsi_debug: Factor out initialization of size parameters, Shinichiro Kawasaki
        • Re: [PATCH RFC 1/2] scsi: scsi_debug: Factor out initialization of size parameters, Bart Van Assche
  • [PATCH RFC 2/2] scsi: scsi_debug: Allow dev_size_mb changes through sysfs, Shin'ichiro Kawasaki
• [PATCH v3 0/4] Re-use device management code fragments, Avri Altman
  • [PATCH v3 1/4] scsi: ufs: Re-use device management locking code, Avri Altman
  • [PATCH v3 2/4] scsi: ufs: Re-use exec_dev_cmd, Avri Altman
    • Re: [PATCH v3 2/4] scsi: ufs: Re-use exec_dev_cmd, Bart Van Assche
    • Re: [PATCH v3 2/4] scsi: ufs: Re-use exec_dev_cmd, Bean Huo
  • [PATCH v3 3/4] scsi: ufs: Re-use compose_dev_cmd, Avri Altman
  • [PATCH v3 4/4] scsi: ufs: Re-use compose_devman_upiu, Avri Altman
    • Re: [PATCH v3 4/4] scsi: ufs: Re-use compose_devman_upiu, Bart Van Assche
    • Re: [PATCH v3 4/4] scsi: ufs: Re-use compose_devman_upiu, Bean Huo
  • RE: [PATCH v3 0/4] Re-use device management code fragments, Avri Altman
  • Re: [PATCH v3 0/4] Re-use device management code fragments, Martin K. Petersen
• WARNING: CPU: 45 PID: 84967 at ../block/mq-deadline.c:659 dd_exit_sched+0xce/0xe0, Xose Vazquez Perez
  • Re: WARNING: CPU: 45 PID: 84967 at ../block/mq-deadline.c:659 dd_exit_sched+0xce/0xe0, Bart Van Assche
• [PATCH v2 0/6] Add LIBSAS_SHT_BASE for libsas, John Garry
  • [PATCH v2 1/6] scsi: libsas: Add LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH v2 1/6] scsi: libsas: Add LIBSAS_SHT_BASE, Igor Pylypiv
      • Re: [PATCH v2 1/6] scsi: libsas: Add LIBSAS_SHT_BASE, John Garry
        • Re: [PATCH v2 1/6] scsi: libsas: Add LIBSAS_SHT_BASE, Igor Pylypiv
  • [PATCH v2 6/6] scsi: isci: Use LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH v2 6/6] scsi: isci: Use LIBSAS_SHT_BASE, Igor Pylypiv
  • [PATCH v2 5/6] scsi: mvsas: Use LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH v2 5/6] scsi: mvsas: Use LIBSAS_SHT_BASE, Igor Pylypiv
    • Re: [PATCH v2 5/6] scsi: mvsas: Use LIBSAS_SHT_BASE, Jason Yan
  • [PATCH v2 2/6] scsi: pm8001: Use LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH v2 2/6] scsi: pm8001: Use LIBSAS_SHT_BASE, Igor Pylypiv
    • Re: [PATCH v2 2/6] scsi: pm8001: Use LIBSAS_SHT_BASE, Jason Yan
  • [PATCH v2 3/6] scsi: hisi_sas: Use LIBSAS_SHT_BASE_NO_SLAVE_INIT, John Garry
    • Re: [PATCH v2 3/6] scsi: hisi_sas: Use LIBSAS_SHT_BASE_NO_SLAVE_INIT, Igor Pylypiv
  • [PATCH v2 4/6] scsi: aic94xx: Use LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH v2 4/6] scsi: aic94xx: Use LIBSAS_SHT_BASE, Igor Pylypiv
  • Re: [PATCH v2 0/6] Add LIBSAS_SHT_BASE for libsas, Jason Yan
    • Re: [PATCH v2 0/6] Add LIBSAS_SHT_BASE for libsas, John Garry
  • Re: [PATCH v2 0/6] Add LIBSAS_SHT_BASE for libsas, Martin K. Petersen
• [PATCH v1 0/7] ufs: host: mediatek: Provide features and fixes in MediaTek platforms, peter.wang
  • [PATCH v1 7/7] ufs: host: mediatek: support rtff in PM flow, peter.wang
    • Re: [PATCH v1 7/7] ufs: host: mediatek: support rtff in PM flow, Chun-Hung Wu (巫駿宏)
  • [PATCH v1 1/7] ufs: host: mediatek: fix vsx/vccqx control logic, peter.wang
    • Re: [PATCH v1 1/7] ufs: host: mediatek: fix vsx/vccqx control logic, Bart Van Assche
      • Re: [PATCH v1 1/7] ufs: host: mediatek: fix vsx/vccqx control logic, Peter Wang (王信友)
    • Re: [PATCH v1 1/7] ufs: host: mediatek: fix vsx/vccqx control logic, Chun-Hung Wu (巫駿宏)
  • [PATCH v1 5/7] ufs: host: mediatek: rename host power control API, peter.wang
    • RE: [PATCH v1 5/7] ufs: host: mediatek: rename host power control API, Avri Altman
    • Re: [PATCH v1 5/7] ufs: host: mediatek: rename host power control API, Chun-Hung Wu (巫駿宏)
    • Re: [PATCH v1 5/7] ufs: host: mediatek: rename host power control API, Bart Van Assche
      • Re: [PATCH v1 5/7] ufs: host: mediatek: rename host power control API, Peter Wang (王信友)
  • [PATCH v1 4/7] ufs: host: mediatek: ufs mtk sip command reconstruct, peter.wang
    • Re: [PATCH v1 4/7] ufs: host: mediatek: ufs mtk sip command reconstruct, Bart Van Assche
      • Re: [PATCH v1 4/7] ufs: host: mediatek: ufs mtk sip command reconstruct, Peter Wang (王信友)
    • Re: [PATCH v1 4/7] ufs: host: mediatek: ufs mtk sip command reconstruct, Chun-Hung Wu (巫駿宏)
  • [PATCH v1 3/7] ufs: host: mediatek: Add UFS_MTK_CAP_DISABLE_MCQ, peter.wang
    • RE: [PATCH v1 3/7] ufs: host: mediatek: Add UFS_MTK_CAP_DISABLE_MCQ, Avri Altman
    • Re: [PATCH v1 3/7] ufs: host: mediatek: Add UFS_MTK_CAP_DISABLE_MCQ, Chun-Hung Wu (巫駿宏)
  • [PATCH v1 6/7] ufs: host: mediatek: support mphy reset, peter.wang
    • Re: [PATCH v1 6/7] ufs: host: mediatek: support mphy reset, Chun-Hung Wu (巫駿宏)
  • [PATCH v1 2/7] ufs: host: mediatek: tx skew fix, peter.wang
    • RE: [PATCH v1 2/7] ufs: host: mediatek: tx skew fix, Avri Altman
      • Re: [PATCH v1 2/7] ufs: host: mediatek: tx skew fix, Peter Wang (王信友)
    • RE: [PATCH v1 2/7] ufs: host: mediatek: tx skew fix, Avri Altman
    • Re: [PATCH v1 2/7] ufs: host: mediatek: tx skew fix, Bart Van Assche
    • Re: [PATCH v1 2/7] ufs: host: mediatek: tx skew fix, Chun-Hung Wu (巫駿宏)
  • Re: [PATCH v1 0/7] ufs: host: mediatek: Provide features and fixes in MediaTek platforms, Chun-Hung Wu (巫駿宏)
• [PATCH v8 0/7] NCQ Priority sysfs sttributes for libsas, Igor Pylypiv
  • [PATCH v8 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Igor Pylypiv
    • Re: [PATCH v8 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Niklas Cassel
      • Re: [PATCH v8 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Damien Le Moal
        • Re: [PATCH v8 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Niklas Cassel
    • Re: [PATCH v8 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Niklas Cassel
  • [PATCH v8 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
    • Re: [PATCH v8 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Niklas Cassel
    • Re: [PATCH v8 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Geert Uytterhoeven
      • Re: [PATCH v8 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Damien Le Moal
      • Re: [PATCH v8 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Damien Le Moal
        • Re: [PATCH v8 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Geert Uytterhoeven
          • Re: [PATCH v8 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Damien Le Moal
  • [PATCH v8 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
  • [PATCH v8 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v8 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Niklas Cassel
  • [PATCH v8 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v8 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Niklas Cassel
  • [PATCH v8 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v8 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Niklas Cassel
  • [PATCH v8 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Igor Pylypiv
  • Re: [PATCH v8 0/7] NCQ Priority sysfs sttributes for libsas, Martin K. Petersen
• [PATCH v3 0/4] scsi_debug improvements, Bart Van Assche
  • [PATCH v3 2/4] scsi: scsi_debug: Do not sleep in atomic sections, Bart Van Assche
    • Re: [PATCH v3 2/4] scsi: scsi_debug: Do not sleep in atomic sections, John Garry
  • [PATCH v3 1/4] scsi: scsi_debug: Remove a reference to in_use_bm, Bart Van Assche
    • Re: [PATCH v3 1/4] scsi: scsi_debug: Remove a reference to in_use_bm, John Garry
      • Re: [PATCH v3 1/4] scsi: scsi_debug: Remove a reference to in_use_bm, Bart Van Assche
  • [PATCH v3 3/4] scsi: scsi_debug: Simplify command handling, Bart Van Assche
  • [PATCH v3 4/4] scsi: scsi_debug: Make CRC_T10DIF support optional, Bart Van Assche
• [PATCH v2 0/7] mpi3mr: Few Enhancements and minor fixes, Ranjan Kumar
  • [PATCH v2 1/7] mpi3mr: Block devices are not removed from OS even vd's are offlined, Ranjan Kumar
  • [PATCH v2 2/7] mpi3mr: Set MPI request flags appropriately, Ranjan Kumar
  • [PATCH v2 3/7] mpi3mr: Clear controller-wide flag that is used to block IOCTLS for the unresponsive controller, Ranjan Kumar
  • [PATCH v2 4/7] mpi3mr: Set the WriteSame Divert Capability in the IOCInit MPI Request, Ranjan Kumar
  • [PATCH v2 6/7] mpi3mr: Update MPI Headers to revision 31, Ranjan Kumar
  • [PATCH v2 5/7] mpi3mr: Debug ability improvements, Ranjan Kumar
    • Re: [PATCH v2 5/7] mpi3mr: Debug ability improvements, kernel test robot
  • [PATCH v2 7/7] mpi3mr: driver version upgrade to 8.8.1.0.50, Ranjan Kumar
• [PATCH v4 0/3] SCSI: Fix issues between removing device and error handle, Wenchao Hao
  • [PATCH v4 2/3] scsi: scsi_error: Fix wrong statistic when print error info, Wenchao Hao
  • [PATCH v4 1/3] scsi: core: Add new helper to iterate all devices of host, Wenchao Hao
  • [PATCH v4 3/3] scsi: scsi_error: Fix device reset is not triggered, Wenchao Hao
  • Re: [PATCH v4 0/3] SCSI: Fix issues between removing device and error handle, Wenchao Hao
  • Re: [PATCH v4 0/3] SCSI: Fix issues between removing device and error handle, Wenchao Hao
  • Re: [PATCH v4 0/3] SCSI: Fix issues between removing device and error handle, Markus Elfring
    • Re: [PATCH v4 0/3] SCSI: Fix issues between removing device and error handle, Wenchao Hao
      • Re: [PATCH v4 0/3] SCSI: Fix issues between removing device and error handle, Julia Lawall
        • Re: [PATCH v4 0/3] SCSI: Fix issues between removing device and error handle, Wenchao Hao
        • Re: [PATCH v4 0/3] SCSI: Fix issues between removing device and error handle, Wenchao Hao
          • Re: [v4 0/3] SCSI: Fix issues between removing device and error handle, Markus Elfring
            • Re: [v4 0/3] SCSI: Fix issues between removing device and error handle, Wenchao Hao
• [PATCH v4 0/2] scsi: libsas: Fix disk not being scanned in after being removed, Xingui Yang
  • [PATCH v4 2/2] scsi: libsas: Fix disk not being scanned in after being removed, Xingui Yang
  • [PATCH v4 1/2] scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type(), Xingui Yang
• [PATCH][next] scsi: target: iscsi: remove unused variable xfer_len, Colin Ian King
  • Re: [PATCH][next] scsi: target: iscsi: remove unused variable xfer_len, Martin K. Petersen
• [PATCH v3 0/3] scsi: libsas: Fix disk not being scanned in after being removed, Xingui Yang
  • [PATCH v3 1/3] scsi: libsas: Allow smp_execute_task() arguments to be on the stack, Xingui Yang
    • Re: [PATCH v3 1/3] scsi: libsas: Allow smp_execute_task() arguments to be on the stack, Dan Carpenter
      • Re: [PATCH v3 1/3] scsi: libsas: Allow smp_execute_task() arguments to be on the stack, yangxingui
  • [PATCH v3 3/3] scsi: libsas: Fix disk not being scanned in after being removed, Xingui Yang
    • Re: [PATCH v3 3/3] scsi: libsas: Fix disk not being scanned in after being removed, John Garry
      • Re: [PATCH v3 3/3] scsi: libsas: Fix disk not being scanned in after being removed, yangxingui
  • [PATCH v3 2/3] scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type(), Xingui Yang
    • Re: [PATCH v3 2/3] scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type(), John Garry
  • Re: [PATCH v3 0/3] scsi: libsas: Fix disk not being scanned in after being removed, John Garry
• [PATCH] scsi: mpi3mr: Avoid memcpy field-spanning write WARNING, Shin'ichiro Kawasaki
  • Re: [PATCH] scsi: mpi3mr: Avoid memcpy field-spanning write WARNING, Johannes Thumshirn
  • Re: [PATCH] scsi: mpi3mr: Avoid memcpy field-spanning write WARNING, Sathya Prakash Veerichetty
    • Re: [PATCH] scsi: mpi3mr: Avoid memcpy field-spanning write WARNING, Shinichiro Kawasaki
• [PATCH v4] USB:UAS:return ENODEV when submit urbs fail with device not attached, Weitao Wang
• 판매 문의 2024, info
• [PATCH v7 0/7] NCQ Priority sysfs sttributes for libsas, Igor Pylypiv
  • [PATCH v7 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Igor Pylypiv
    • Re: [PATCH v7 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Niklas Cassel
  • [PATCH v7 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
    • Re: [PATCH v7 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Niklas Cassel
      • Re: [PATCH v7 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
        • Re: [PATCH v7 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Niklas Cassel
          • Re: [PATCH v7 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
  • [PATCH v7 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v7 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Niklas Cassel
  • [PATCH v7 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v7 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Niklas Cassel
      • Re: [PATCH v7 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Igor Pylypiv
        • Re: [PATCH v7 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Niklas Cassel
          • Re: [PATCH v7 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Igor Pylypiv
  • [PATCH v7 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v7 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Niklas Cassel
      • Re: [PATCH v7 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Igor Pylypiv
        • Re: [PATCH v7 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, John Garry
          • Re: [PATCH v7 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Niklas Cassel
            • Re: [PATCH v7 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, John Garry
  • [PATCH v7 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v7 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Niklas Cassel
      • Re: [PATCH v7 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
  • [PATCH v7 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v7 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Niklas Cassel
  • Re: [PATCH v7 0/7] NCQ Priority sysfs sttributes for libsas, Niklas Cassel
    • Re: [PATCH v7 0/7] NCQ Priority sysfs sttributes for libsas, Igor Pylypiv
• [PATCH v6 0/7] NCQ Priority sysfs sttributes for libsas, Igor Pylypiv
  • [PATCH v6 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Igor Pylypiv
    • Re: [PATCH v6 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Hannes Reinecke
  • [PATCH v6 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
    • Re: [PATCH v6 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Damien Le Moal
      • Re: [PATCH v6 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
    • Re: [PATCH v6 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Hannes Reinecke
  • [PATCH v6 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v6 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Hannes Reinecke
  • [PATCH v6 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v6 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Hannes Reinecke
  • [PATCH v6 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v6 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Hannes Reinecke
  • [PATCH v6 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v6 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Hannes Reinecke
  • [PATCH v6 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v6 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Hannes Reinecke
• [PATCH v3 0/7] scsi: replace deprecated strncpy, Justin Stitt
  • [PATCH v3 1/7] scsi: mpi3mr: replace deprecated strncpy with assignments, Justin Stitt
  • [PATCH v3 2/7] scsi: mpt3sas: replace deprecated strncpy with strscpy, Justin Stitt
  • [PATCH v3 4/7] scsi: qla4xxx: replace deprecated strncpy with strscpy, Justin Stitt
  • [PATCH v3 3/7] scsi: qedf: replace deprecated strncpy with strscpy, Justin Stitt
  • [PATCH v3 5/7] scsi: devinfo: replace strncpy and manual pad, Justin Stitt
  • [PATCH v3 6/7] scsi: smartpqi: replace deprecated strncpy with strscpy, Justin Stitt
  • [PATCH v3 7/7] scsi: wd33c93: replace deprecated strncpy with strscpy, Justin Stitt
  • Re: [PATCH v3 0/7] scsi: replace deprecated strncpy, Martin K. Petersen
• [PATCH v2] scsi_debug: Make CRC_T10DIF support optional, Bart Van Assche
  • Re: [PATCH v2] scsi_debug: Make CRC_T10DIF support optional, John Garry
    • Re: [PATCH v2] scsi_debug: Make CRC_T10DIF support optional, Bart Van Assche
      • Re: [PATCH v2] scsi_debug: Make CRC_T10DIF support optional, John Garry
        • Re: [PATCH v2] scsi_debug: Make CRC_T10DIF support optional, Bart Van Assche
          • Re: [PATCH v2] scsi_debug: Make CRC_T10DIF support optional, John Garry
            • Re: [PATCH v2] scsi_debug: Make CRC_T10DIF support optional, Martin K. Petersen
            • Re: [PATCH v2] scsi_debug: Make CRC_T10DIF support optional, Bart Van Assche
• [PATCH v2 0/4] Re-use device management code fragments, Avri Altman
  • [PATCH v2 1/4] scsi: ufs: Re-use device management locking code, Avri Altman
    • Re: [PATCH v2 1/4] scsi: ufs: Re-use device management locking code, Bean Huo
  • [PATCH v2 2/4] scsi: ufs: Re-use exec_dev_cmd, Avri Altman
    • Re: [PATCH v2 2/4] scsi: ufs: Re-use exec_dev_cmd, Bean Huo
      • RE: [PATCH v2 2/4] scsi: ufs: Re-use exec_dev_cmd, Avri Altman
        • Re: [PATCH v2 2/4] scsi: ufs: Re-use exec_dev_cmd, Bean Huo
          • RE: [PATCH v2 2/4] scsi: ufs: Re-use exec_dev_cmd, Avri Altman
  • [PATCH v2 3/4] scsi: ufs: Re-use compose_dev_cmd, Avri Altman
    • Re: [PATCH v2 3/4] scsi: ufs: Re-use compose_dev_cmd, Bean Huo
    • Re: [PATCH v2 3/4] scsi: ufs: Re-use compose_dev_cmd, Bart Van Assche
  • [PATCH v2 4/4] scsi: ufs: Re-use compose_devman_upiu, Avri Altman
    • Re: [PATCH v2 4/4] scsi: ufs: Re-use compose_devman_upiu, Bean Huo
      • RE: [PATCH v2 4/4] scsi: ufs: Re-use compose_devman_upiu, Avri Altman
        • Re: [PATCH v2 4/4] scsi: ufs: Re-use compose_devman_upiu, Bart Van Assche
• [PATCH 00/12] Update lpfc to revision 14.4.0.1, Justin Tee
  • [PATCH 01/12] lpfc: Remove unnecessary log message in queuecommand path, Justin Tee
  • [PATCH 02/12] lpfc: Move NPIV's transport unregistration to after resource clean up, Justin Tee
  • [PATCH 03/12] lpfc: Remove IRQF_ONESHOT flag from threaded irq handling, Justin Tee
  • [PATCH 04/12] lpfc: Update lpfc_ramp_down_queue_handler logic, Justin Tee
  • [PATCH 06/12] lpfc: Release hbalock before calling lpfc_worker_wake_up, Justin Tee
  • [PATCH 05/12] lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port, Justin Tee
  • [PATCH 07/12] lpfc: Use a dedicated lock for ras_fwlog state, Justin Tee
  • [PATCH 08/12] lpfc: Define lpfc_nodelist type for ctx_ndlp ptr, Justin Tee
  • [PATCH 09/12] lpfc: Define lpfc_dmabuf type for ctx_buf ptr, Justin Tee
  • [PATCH 10/12] lpfc: Define types in a union for generic void *context3 ptr, Justin Tee
  • [PATCH 11/12] lpfc: Update lpfc version to 14.4.0.1, Justin Tee
  • [PATCH 12/12] lpfc: Copyright updates for 14.4.0.1 patches, Justin Tee
  • Re: [PATCH 00/12] Update lpfc to revision 14.4.0.1, Martin K. Petersen
• [BUG] scsi: sg: NULL pointer dereference, Alexander Wetzel
  • [PATCH] scsi: sg: Avoid sg device teardown race, Alexander Wetzel
    • [PATCH v2] scsi: sg: Avoid sg device teardown race, Alexander Wetzel
      • Re: [PATCH v2] scsi: sg: Avoid sg device teardown race, Greg KH
        • Re: [PATCH v2] scsi: sg: Avoid sg device teardown race, Alexander Wetzel
      • Re: [PATCH v2] scsi: sg: Avoid sg device teardown race, Bart Van Assche
        • Re: [PATCH v2] scsi: sg: Avoid sg device teardown race, Alexander Wetzel
          • Re: [PATCH v2] scsi: sg: Avoid sg device teardown race, Bart Van Assche
      • Re: [PATCH v2] scsi: sg: Avoid sg device teardown race, Bart Van Assche
      • [PATCH v3] scsi: sg: Avoid sg device teardown race, Alexander Wetzel
        • Re: [PATCH v3] scsi: sg: Avoid sg device teardown race, Bart Van Assche
        • Re: [PATCH v3] scsi: sg: Avoid sg device teardown race, Martin K. Petersen
• RE:Insect Screens,Patio screens,Flyscreens, hikingsales03
• [PATCH 0/6] Add LIBSAS_SHT_BASE for libsas, John Garry
  • [PATCH 1/6] scsi: libsas: Add LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH 1/6] scsi: libsas: Add LIBSAS_SHT_BASE, Jason Yan
  • [PATCH 2/6] scsi: pm8001: Use LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH 2/6] scsi: pm8001: Use LIBSAS_SHT_BASE, Jason Yan
    • Re: [PATCH 2/6] scsi: pm8001: Use LIBSAS_SHT_BASE, Jason Yan
  • [PATCH 4/6] scsi: aic94xx: Use LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH 4/6] scsi: aic94xx: Use LIBSAS_SHT_BASE, Jason Yan
  • [PATCH 3/6] scsi: hisi_sas: Use LIBSAS_SHT_BASE_NO_SLAVE_INIT, John Garry
    • Re: [PATCH 3/6] scsi: hisi_sas: Use LIBSAS_SHT_BASE_NO_SLAVE_INIT, Jason Yan
    • Re: [PATCH 3/6] scsi: hisi_sas: Use LIBSAS_SHT_BASE_NO_SLAVE_INIT, Jason Yan
  • [PATCH 5/6] scsi: mvsas: Use LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH 5/6] scsi: mvsas: Use LIBSAS_SHT_BASE, Jason Yan
      • Re: [PATCH 5/6] scsi: mvsas: Use LIBSAS_SHT_BASE, John Garry
        • Re: [PATCH 5/6] scsi: mvsas: Use LIBSAS_SHT_BASE, Jason Yan
          • Re: [PATCH 5/6] scsi: mvsas: Use LIBSAS_SHT_BASE, John Garry
  • [PATCH 6/6] scsi: isci: Use LIBSAS_SHT_BASE, John Garry
    • Re: [PATCH 6/6] scsi: isci: Use LIBSAS_SHT_BASE, Jason Yan
      • Re: [PATCH 6/6] scsi: isci: Use LIBSAS_SHT_BASE, John Garry
        • Re: [PATCH 6/6] scsi: isci: Use LIBSAS_SHT_BASE, Jason Yan
• Development of new flavors, Maxwell Atlee
• [PATCH v5 0/7] NCQ Priority sysfs sttributes for libsas, Igor Pylypiv
  • [PATCH v5 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Igor Pylypiv
    • Re: [PATCH v5 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Jason Yan
  • [PATCH v5 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
    • Re: [PATCH v5 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Jason Yan
    • Re: [PATCH v5 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, John Garry
      • Re: [PATCH v5 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
  • [PATCH v5 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v5 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Jason Yan
  • [PATCH v5 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v5 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Jason Yan
  • [PATCH v5 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v5 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Jason Yan
  • [PATCH v5 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v5 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Jason Yan
  • [PATCH v5 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v5 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Jason Yan
• [PATCH v4 0/7] NCQ Priority sysfs sttributes for libsas, Igor Pylypiv
  • [PATCH v4 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Igor Pylypiv
    • Re: [PATCH v4 1/7] ata: libata-sata: Factor out NCQ Priority configuration helpers, Damien Le Moal
  • [PATCH v4 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
    • Re: [PATCH v4 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Damien Le Moal
      • Re: [PATCH v4 2/7] scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices, Igor Pylypiv
  • [PATCH v4 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v4 3/7] scsi: pm80xx: Add libsas SATA sysfs attributes group, Damien Le Moal
  • [PATCH v4 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v4 4/7] scsi: mvsas: Add libsas SATA sysfs attributes group, Damien Le Moal
  • [PATCH v4 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v4 5/7] scsi: hisi_sas: Add libsas SATA sysfs attributes group, Damien Le Moal
  • [PATCH v4 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v4 6/7] scsi: aic94xx: Add libsas SATA sysfs attributes group, Damien Le Moal
  • [PATCH v4 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Igor Pylypiv
    • Re: [PATCH v4 7/7] scsi: isci: Add libsas SATA sysfs attributes group, Damien Le Moal
• [PATCH 0/4] Re-use device management code fragments, Avri Altman
  • [PATCH 1/4] scsi: ufs: Re-use device management locking code, Avri Altman
    • Re: [PATCH 1/4] scsi: ufs: Re-use device management locking code, Bart Van Assche
      • RE: [PATCH 1/4] scsi: ufs: Re-use device management locking code, Avri Altman
  • [PATCH 2/4] scsi: ufs: Re-use exec_dev_cmd, Avri Altman
    • Re: [PATCH 2/4] scsi: ufs: Re-use exec_dev_cmd, Bart Van Assche
      • RE: [PATCH 2/4] scsi: ufs: Re-use exec_dev_cmd, Avri Altman
        • Re: [PATCH 2/4] scsi: ufs: Re-use exec_dev_cmd, Bart Van Assche
          • RE: [PATCH 2/4] scsi: ufs: Re-use exec_dev_cmd, Avri Altman
  • [PATCH 3/4] scsi: ufs: Re-use compose_dev_cmd, Avri Altman
    • Re: [PATCH 3/4] scsi: ufs: Re-use compose_dev_cmd, Bart Van Assche
  • [PATCH 4/4] scsi: ufs: Re-use compose_devman_upiu, Avri Altman
    • Re: [PATCH 4/4] scsi: ufs: Re-use compose_devman_upiu, Bart Van Assche
• [PATCH v2] scsi: lpfc: correct size for cmdwqe/rspwqe for memset, Muhammad Usama Anjum
  • Re: [PATCH v2] scsi: lpfc: correct size for cmdwqe/rspwqe for memset, Justin Tee
  • Re: [PATCH v2] scsi: lpfc: correct size for cmdwqe/rspwqe for memset, Martin K. Petersen
• [PATCH v2] scsi: lpfc: correct size for wqe for memset, Muhammad Usama Anjum