Re: [PATCH v1 2/2] scsi: ufs: qcom: Update the UIC Command Timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/22/2024 11:18 AM, Bart Van Assche wrote:
On 5/22/24 00:01, Bao D. Nguyen wrote:
Change the UIC command timeout to 2 seconds.
This extra time is to allow the uart occasionally print long
debug messages and logging from different modules during
product development. With the default hardcoded 500ms timeout,
the uart printing with interrupt disabled may cause the UIC command
interrupt get starved, resulting in a UIC command timeout and
eventually a watchdog timeout.
When a product development completes, the vendors may
select a different UIC command timeout as desired.

Signed-off-by: Bao D. Nguyen <quic_nguyenb@xxxxxxxxxxx>
---
  drivers/ufs/host/ufs-qcom.c | 3 +++
  1 file changed, 3 insertions(+)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 79f8cb3..4649e0f 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -49,6 +49,7 @@ enum {
  #define QCOM_UFS_MAX_GEAR 4
  #define QCOM_UFS_MAX_LANE 2
+#define QCOM_UIC_CMD_TIMEOUT_MS 2000
  enum {
      MODE_MIN,
@@ -1111,6 +1112,8 @@ static int ufs_qcom_init(struct ufs_hba *hba)
          dev_warn(dev, "%s: failed to configure the testbus %d\n",
                  __func__, err);
+    hba->uic_cmd_timeout = QCOM_UIC_CMD_TIMEOUT_MS;
+
      return 0;
  out_variant_clear:

Given the description of patch 1, the addressed issue is not specific to
a single vendor. Is that correct?

The issue we are trying to address is not specific to a single vendor.
Any vendor would have a freedom to choose the UIC command timeout. At different times during their product development, they can choose different UIC command timeout, or use the default 500ms. It's the flexibility we would like to give to vendors.


Since the described issue is only encountered during development, why to
modify the UIC command timeout unconditionally?

The vendors can enjoy the default 500ms UIC timeout if they prefer.
As long as they don't write to hba->uic_cmd_timeout in the vendor's initialization routine, the default value of 500ms will be used.

Thanks,
Bao


Thanks,

Bart.





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux