Linux SCSI

• Thread Index

• [PATCH 3/3] qedf: Change context reset messages to ratelimited
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 2/3] qedf: Fix refcount issue when LOGO is received during TMF
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 1/3] qedf: Add stag_work to all the vports
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 0/3] qedf misc bug fixes
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v1] scsi: ufs: see link lost as fatal
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• [PATCH v1] scsi: ufs: use an generic error code in ufshcd_set_dev_pwr_mode
  • From: Kiwoong Kim <kwmad.kim@xxxxxxxxxxx>
• Re: [PATCH] scsi: hisi_sas: Remove useless DMA-32 fallback configuration
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: ufshcd-pltfrm: check the return value of devm_kstrdup()
  • From: Bean Huo <huobean@xxxxxxxxx>
• RE: [EXT] [PATCH V2] scsi: bnx2fc: flush destroy_work queue before calling bnx2fc_interface_put
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH v2] scsi: ufs: ufshcd-pltfrm: check the return value of devm_kstrdup()
  • From: xkernel.wang@xxxxxxxxxxx
• [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: Christopher Horler <cshorler@xxxxxxxxxxxxxx>
• [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] scsi: bfa: Remove useless DMA-32 fallback configuration
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] scsi: hisi_sas: Remove useless DMA-32 fallback configuration
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] scsi: 3w-sas: Remove useless DMA-32 fallback configuration
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v3] scsi: bnx2fc: flush destroy_work queue before calling bnx2fc_interface_put
  • From: John Meneghini <jmeneghi@xxxxxxxxxx>
• [PATCH] scsi: scsi_scan purge devices no longer in reported LUN list
  • From: Brian Bunker <brian@xxxxxxxxxxxxxxx>
• Re: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 5.15+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] scsi: bnx2fc: flush destroy_work queue before calling bnx2fc_interface_put
  • From: John Meneghini <jmeneghi@xxxxxxxxxx>
• [PATCH V2] scsi: bnx2fc: flush destroy_work queue before calling bnx2fc_interface_put
  • From: John Meneghini <jmeneghi@xxxxxxxxxx>
• Re: [GIT PULL] first round of SCSI updates for the 5.15+ merge window
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL] first round of SCSI updates for the 5.15+ merge window
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/1] t10-pi bio split fix
  • From: "Lyashkov, Alexey" <alexey.lyashkov@xxxxxxx>
• [PATCH] scsi: bnx2fc: flush destroy_work queue before calling bnx2fc_interface_put
  • From: John Meneghini <jmeneghi@xxxxxxxxxx>
• [GIT PULL] first round of SCSI updates for the 5.15+ merge window
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/1] t10-pi bio split fix
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH 0/1] t10-pi bio split fix
  • From: "Lyashkov, Alexey" <alexey.lyashkov@xxxxxxx>
• Re: [PATCH] target: make sure the np under each tpg is unique
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH -next v2] scsi: efct: don't use GFP_KERNEL under spin lock
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Martin Wilck <martin.wilck@xxxxxxxx>
• [PATCH] scsi: mpt3sas: avoid watchdog issue while releasing chain buffers
  • From: mwilck@xxxxxxxx
• [PATCH] drivers/message/fusion: remove redundant rc variable
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH 1/9] scsi_debug: address races following module load
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [PATCH] scsi: Do not break scan luns loop if add single lun failed
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• [PATCH -next] scsi: message: fusion: Fix returned errno code
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] lpfc: Retry FLOGI if previous attempt was rejected with busy
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• [PATCH] scsi: megaraid: use max() to make code cleaner
  • From: cgel.zte@xxxxxxxxx
• [PATCH] target: make sure the np under each tpg is unique
  • From: mingzhe.zou@xxxxxxxxxxxx
• [PATCH] target: make sure the np under each tpg is unique
  • From: mingzhe.zou@xxxxxxxxxxxx
• Re: [PATCH v2] scsi: pmcraid: Fix memory allocation in 'pmcraid_alloc_sglist()'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH -next v2] scsi: efct: don't use GFP_KERNEL under spin lock
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] scsi: qedf: potential dereference of null pointer
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: aacraid: fix spelling of "its"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: Update Persistent Trigger Pages from SysFs interface.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][RESEND] scsi: megaraid: Avoid mismatched storage type sizes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: mpi3mr: Fix some spelling mistakes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] drivers/scsi: remove redundant error variable
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/2] small cleanups
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: pm80xx: port reset timeout error handling correction.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2] scsi: pmcraid: Fix memory allocation in 'pmcraid_alloc_sglist()'
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [bug report] scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: modify Tactive time setting conditions
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: efct: Remove useless DMA-32 fallback configuration
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 00/16] Remove usage of the deprecated "pci-dma-compat.h" API
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• RE: [PATCH v2] scsi: ufs: modify Tactive time setting conditions
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• [PATCH] lpfc: Retry FLOGI if previous attempt was rejected with busy
  • From: Daniel Wagner <dwagner@xxxxxxx>
• RE: [PATCH v2] scsi: ufs: modify Tactive time setting conditions
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [bug report] scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] scsi: storvsc: Fix storvsc_queuecommand() memory leak
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH] scsi: storvsc: Fix storvsc_queuecommand() memory leak
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH -next] scsi: efct: don't use GFP_KERNEL under spin lock
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH v2] scsi: pmcraid: Fix memory allocation in 'pmcraid_alloc_sglist()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• Re: [PATCH] scsi: storvsc: Fix storvsc_queuecommand() memory leak
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH -next] scsi: efct: don't use GFP_KERNEL under spin lock
  • From: Maurizio Lombardi <mlombard@xxxxxxxxxx>
• [PATCH -next] scsi: efct: don't use GFP_KERNEL under spin lock
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH -next] scsi: efct: Use GFP_ATOMIC under spin lock
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] pmcraid: don't use GFP_DMA in pmcraid_alloc_sglist
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 14/16] scsi: mptsas: Use dma_alloc_coherent()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 15/16] scsi: mptctl: Use dma_alloc_coherent()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 13/16] scsi: mptsas: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 12/16] scsi: mptbase: Use dma_alloc_coherent()
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 11/16] scsi: mptbase: Use dma_alloc_coherent() in 'mpt_alloc_fw_memory()'
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 10/16] scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: efct: Remove useless DMA-32 fallback configuration
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH v2 17/17] qla2xxx: Update version to 10.02.07.300-k
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 15/17] qla2xxx: Add devid's and conditionals for 28xx
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 05/17] qla2xxx: Fix premature hw access after pci error
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 04/17] qla2xxx: Fix warning message due to adisc is being flush
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 16/17] qla2xxx: check for firmware dump already collected
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 13/17] qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 07/17] qla2xxx: add retry for exec fw
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 08/17] qla2xxx: Show wrong FDMI data for 64G adaptor
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 14/17] qla2xxx: Suppress a kernel complaint in qla_create_qpair()
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 02/17] qla2xxx: Implement ref count for srb
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 12/17] qla2xxx: edif: Fix clang warning
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 10/17] qla2xxx: Fix device reconnect in loop topology
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 03/17] qla2xxx: fix stuck session in gpdb
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 11/17] qla2xxx: fix warning for missing error code
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 09/17] qla2xxx: Add ql2xnvme_queues module param to configure number of NVME queues
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 06/17] qla2xxx: Fix scheduling while atomic
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 01/17] qla2xxx: Refactor asynchronous command initialization
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH v2 00/17] qla2xxx misc bug fixes and features
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• RE: [PATCH v2] scsi: ufs: modify Tactive time setting conditions
  • From: 서호영 <hy50.seo@xxxxxxxxxxx>
• [PATCH] scsi: efct: Remove useless DMA-32 fallback configuration
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v2 8/9] scsi_debug: change store from vmalloc to sgl
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 9/9] scsi_debug: add environmental reporting log subpage
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 7/9] scsi_debug: add sdeb_sgl_copy_sgl and friends
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 6/9] scsi_debug: add no_rwlock parameter
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 5/9] scsi_debug: divide power on reset unit attention
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 4/9] scsi_debug: refine sdebug_blk_mq_poll
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 3/9] scsi_debug: use task set full more
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 2/9] scsi_debug: strengthen defer_t accesses
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 1/9] scsi_debug: address races following module load
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 0/9] scsi_debug: collection of additions
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH] scsi: storvsc: Fix storvsc_queuecommand() memory leak
  • From: Juan Vazquez <juvazq@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Arseny Maslennikov <ar@xxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Arseny Maslennikov <ar@xxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH] target: allow changing dbroot if there are no registered devices
  • From: Maurizio Lombardi <mlombard@xxxxxxxxxx>
• Re: [PATCH][RESEND] scsi: megaraid: Avoid mismatched storage type sizes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• RE: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• RE: [PATCH RFT] scsi: pm8001: Fix FW crash for maxcpus=1
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• RE: [PATCH v2] scsi: ufs: modify Tactive time setting conditions
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• [PATCH v2] scsi: ufs: modify Tactive time setting conditions
  • From: SEO HOYOUNG <hy50.seo@xxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RE: [PATCH v1] scsi: ufs: modify Tactive time setting conditions
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• [PATCH v1] scsi: ufs: modify Tactive time setting conditions
  • From: SEO HOYOUNG <hy50.seo@xxxxxxxxxxx>
• Re: [PATCH RFT] scsi: pm8001: Fix FW crash for maxcpus=1
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• [PATCH 14/16] scsi: mptsas: Use dma_alloc_coherent()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 15/16] scsi: mptctl: Use dma_alloc_coherent()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 13/16] scsi: mptsas: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 12/16] scsi: mptbase: Use dma_alloc_coherent()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 11/16] scsi: mptbase: Use dma_alloc_coherent() in 'mpt_alloc_fw_memory()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 10/16] scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 00/16] Remove usage of the deprecated "pci-dma-compat.h" API
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• RE: [PATCH 00/10] Add wrapped key support for Qualcomm ICE
  • From: Gaurav Kashyap <gaurkash@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] Add wrapped key support for Qualcomm ICE
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Martin Wilck <martin.wilck@xxxxxxxx>
• Re: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] qla2xxx: fix error status checking in qla24xx_modify_vp_config()
  • From: Martin Wilck <mwilck@xxxxxxxx>
• Re: [PATCH RFT] scsi: pm8001: Fix FW crash for maxcpus=1
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Martin Wilck <martin.wilck@xxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] scsi: pm80xx: port reset timeout error handling correction.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxx>
• RE: [PATCH] scsi: pm80xx: port reset timeout error handling correction.
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• RE: [PATCH RFT] scsi: pm8001: Fix FW crash for maxcpus=1
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Martin Wilck <martin.wilck@xxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: mpt3sas fails to allocate budget_map and detects no devices
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 14/16] qla2xxx: Add devid's and conditionals for 28xx
  • From: Arun Easi <aeasi@xxxxxxxxxxx>
• Re: [PATCH] pmcraid: don't use GFP_DMA in pmcraid_alloc_sglist
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/9] scsi_debug: address races following module load
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• mpt3sas fails to allocate budget_map and detects no devices
  • From: Martin Wilck <martin.wilck@xxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH][RESEND] scsi: megaraid: Avoid mismatched storage type sizes
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] qla2xxx: fix error status checking in qla24xx_modify_vp_config()
  • From: Dirk Müller <dmueller@xxxxxxx>
• Re: [PATCH v2 -next] scsi: storvsc: Fix unsigned comparison to zero
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH RFT] scsi: pm8001: Fix FW crash for maxcpus=1
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 8/9] scsi_debug: change store from vmalloc to sgl
  • From: Shinichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
• Re: [PATCH] scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] scsi: pm80xx: port reset timeout error handling correction.
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxx>
• Re: [PATCH] scsi: pm80xx: port reset timeout error handling correction.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 -next] scsi: storvsc: Fix unsigned comparison to zero
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH][next] scsi: mpi3mr: Fix some spelling mistakes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] mpt3sas: Update Persistent Trigger Pages from SysFs interface.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: aacraid: fix spelling of "its"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: Fusion MPT SAS Host: scsi 0:0:32:0: Wrong diagnostic page; asked for 10 got 0
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: qedf: potential dereference of null pointer
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• RE: [PATCH 02/16] qla2xxx: Implement ref count for srb
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH RFT] scsi: pm8001: Fix FW crash for maxcpus=1
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/16] qla2xxx: Implement ref count for srb
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Walt Drummond <walt@xxxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: "Theodore Ts'o" <tytso@xxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: ebiederm@xxxxxxxxxxxx (Eric W. Biederman)
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Walt Drummond <walt@xxxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: "Theodore Ts'o" <tytso@xxxxxxx>
• [PATCH RFT] scsi: pm8001: Fix FW crash for maxcpus=1
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: ebiederm@xxxxxxxxxxxx (Eric W. Biederman)
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 1/3] scsi: Provide for avoiding trailing allocation length with VPD inquiries
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] scsi: Provide for avoiding trailing allocation length with VPD inquiries
  • From: Khalid Aziz and Shuah Khan <azizkhan@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• [PATCH] scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy()
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 02/16] qla2xxx: Implement ref count for srb
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH] scsi: Do not break scan luns loop if add single lun failed
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• Re: [PATCH v2 05/15] scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• [PATCH] drivers/scsi: remove redundant error variable
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH v2 05/15] scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [EXT] [PATCH] scsi: qedf: potential dereference of null pointer
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Walt Drummond <walt@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• Re: [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• [RFC PATCH 0/8] signals: Support more than 64 signals
  • From: Walt Drummond <walt@xxxxxxxxxxx>
• [RFC PATCH 4/8] signals: Remove sigmask() macro
  • From: Walt Drummond <walt@xxxxxxxxxxx>
• [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 215447] sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 215447] New: sr_mod scsi_mode_sense() failure -> "scsi-1 drive"
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH AUTOSEL 4.9 1/4] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 1/4] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 1/4] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 2/5] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 2/6] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 2/8] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 05/16] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [EXT] [PATCH] scsi: qedf: potential dereference of null pointer
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• RE: [PATCH 14/16] qla2xxx: Add devid's and conditionals for 28xx
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 5.15 65/73] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.10 43/48] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.4 33/37] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.19 24/27] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.14 15/19] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.9 10/13] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.4 08/11] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Bug 215446] New: LSI HBA attempting task abort!scmd every 32 hours
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v3 1/3] scsi: Provide for avoiding trailing allocation length with VPD inquiries
  • From: Christoph Hellwig <hch@xxxxxx>
• RE: [EXT] [PATCH] scsi: qedf: Fix a UAF bug in __qedf_probe
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• RE: [EXT] [PATCH] scsi: qedf: potential dereference of null pointer
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• RE: [PATCH 02/16] qla2xxx: Implement ref count for srb
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• Re: [PATCH 16/16] qla2xxx: Update version to 10.02.07.300-k
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 15/16] qla2xxx: Suppress a kernel complaint in qla_create_qpair()
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 14/16] qla2xxx: Add devid's and conditionals for 28xx
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 13/16] qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 12/16] qla2xxx: edif: Fix clang warning
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 11/16] qla2xxx: fix warning for missing error code
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 10/16] qla2xxx: Fix device reconnect in loop topology
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 09/16] qla2xxx: Add ql2xnvme_queues module param to configure number of NVME queues
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 08/16] qla2xxx: Show wrong FDMI data for 64G adaptor
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• [Bug 209177] mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:10791/_scsih_probe()!
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH 07/16] qla2xxx: add retry for exec fw
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 06/16] qla2xxx: Fix scheduling while atomic
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 05/16] qla2xxx: Fix premature hw access after pci error
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 04/16] qla2xxx: Fix warning message due to adisc is being flush
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 03/16] qla2xxx: fix stuck session in gpdb
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 02/16] qla2xxx: Implement ref count for srb
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 01/16] qla2xxx: Refactor asynchronous command initialization
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• [PATCH v3 2/3] scsi: Avoid using reserved length byte with VPD inquiries
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• [PATCH v3 3/3] scsi: Set allocation length to 255 for ATA Information VPD page
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• [PATCH v3 1/3] scsi: Provide for avoiding trailing allocation length with VPD inquiries
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• [PATCH v3 0/3] Bring the BusLogic host bus adapter driver up to Y2021
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.16-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] SCSI fixes for 5.16-rc7
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
  • From: James Bottomley <jejb@xxxxxxxxxxxxx>
• [PATCH v4 ] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: Yanling Song <songyl@xxxxxxxxxxx>
• [PATCH -next] scsi: mpi3mr: Fix formatting problems in some kernel-doc comments
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• [PATCH 3/9] scsi_debug: use task set full more
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 8/9] scsi_debug: change store from vmalloc to sgl
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 7/9] scsi_debug: add sdeb_sgl_copy_sgl and friends
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 4/9] scsi_debug: refine sdebug_blk_mq_poll
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 9/9] scsi_debug: add environmental reporting log subpage
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 1/9] scsi_debug: address races following module load
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 6/9] scsi_debug: add no_rwlock parameter
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 5/9] scsi_debug: divide power on reset unit attention
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 2/9] scsi_debug: strengthen defer_t accesses
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 0/9] scsi_debug: collection of additions
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH] scsi: Do not break scan luns loop if add single lun failed
  • From: Steffen Maier <maier@xxxxxxxxxxxxx>
• Re: [PATCH 0/1] t10-pi bio split fix
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: nsp_cs: Check of ioremap return value
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [Bug 199887] Fibre login failure on older adapters
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• RE: [PATCH v2 -next] scsi: storvsc: Fix unsigned comparison to zero
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 02/16] qla2xxx: Implement ref count for srb
  • From: Saurav Kashyap <skashyap@xxxxxxxxxxx>
• [PATCH] scsi: pm80xx: port reset timeout error handling correction.
  • From: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH 02/16] qla2xxx: Implement ref count for srb
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 24/32] scsi: Kconfig: add HAS_IOPORT dependencies
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: bnx2fc: fix double free of skb in bnx2fc_rcv
  • From: Yin Xiujiang <yinxiujiang@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH v2 05/15] scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH] sr: don't use GFP_DMA in get_capabilities
  • From: Tyrel Datwyler <turtle.in.the.kernel@xxxxxxxxx>
• re: scsi: hisi_sas: Fix some issues related to, asd_sas_port->phy_list
  • From: "Colin King (gmail)" <colin.i.king@xxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 05/15] scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [RFC 24/32] scsi: Kconfig: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• RE: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH V2] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: Yanling Song <songyl@xxxxxxxxxxx>
• [PATCH] mpt3sas: Update Persistent Trigger Pages from SysFs interface.
  • From: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
• Re: [PATCH -next] scsi: storvsc: Fix unsigned comparison to zero
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH v2 -next] scsi: storvsc: Fix unsigned comparison to zero
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• RE: [PATCH -next] scsi: storvsc: Fix unsigned comparison to zero
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• [PATCH] scsi: Do not break scan luns loop if add single lun failed
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• [PATCH][next] scsi: mpi3mr: Fix some spelling mistakes
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• [PATCH -next] scsi: storvsc: Fix unsigned comparison to zero
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [issue report] pm8001 issues (was driver crashes with IOMMU enabled)
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 16/16] qla2xxx: Update version to 10.02.07.300-k
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 14/16] qla2xxx: Add devid's and conditionals for 28xx
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 15/16] qla2xxx: Suppress a kernel complaint in qla_create_qpair()
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 13/16] qla2xxx: Fix T10 PI tag escape and IP guard options for 28XX adapters
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 08/16] qla2xxx: Show wrong FDMI data for 64G adaptor
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 07/16] qla2xxx: add retry for exec fw
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 11/16] qla2xxx: fix warning for missing error code
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 12/16] qla2xxx: edif: Fix clang warning
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 06/16] qla2xxx: Fix scheduling while atomic
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 09/16] qla2xxx: Add ql2xnvme_queues module param to configure number of NVME queues
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 10/16] qla2xxx: Fix device reconnect in loop topology
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 05/16] qla2xxx: Fix premature hw access after pci error
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 01/16] qla2xxx: Refactor asynchronous command initialization
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 03/16] qla2xxx: fix stuck session in gpdb
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 04/16] qla2xxx: Fix warning message due to adisc is being flush
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 02/16] qla2xxx: Implement ref count for srb
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 00/16] qla2xxx misc bug fixes and features
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH 2/2] scsi: lpfc: Make sure to completely clear some bitmaps
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 1/2] scsi: lpfc: Use bitmap_zalloc() when applicable
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 0/2] scsi: lpfc: Cleanup some bitmap handling.
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2] sr: don't use GFP_DMA
  • From: Baoquan He <bhe@xxxxxxxxxx>
• Re: [PATCH v2] sr: don't use GFP_DMA
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] scsi: bsg: Ignore bsg queue registration failures again
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2] scsi: bsg: fix errno when scsi_bsg_register_queue fails
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] scsi: aacraid: fix spelling of "its"
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: Fix deadlock issue in ufshcd_wait_for_doorbell_clr()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/8] hisi_sas: Some misc patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] qla2xxx: synchronize rport dev_loss_tmo setting
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] efct: don't pass GFP_DMA to dma_alloc_coherent
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] libiscsi: fix UAF when iscsi_conn_get_param and iscsi_conn_teardown concurrent
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 00/25] mpi3mr: driver fixes and enhancements
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] snic: don't use GFP_DMA in snic_queue_report_tgt_req
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] pmcraid: don't use GFP_DMA in pmcraid_alloc_sglist
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] myrb: don't use GFP_DMA in myrb_pdev_slave_alloc
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] myrs: don't use GFP_DMA
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] initio: don't use GFP_DMA in initio_probe_one
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] sr: don't use GFP_DMA
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] ch: don't use GFP_DMA
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 00/15] Add runtime PM support for libsas
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH -next] scsi: efct: Use GFP_ATOMIC under spin lock
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH v2] scsi: bsg: fix errno when scsi_bsg_register_queue fails
  • From: Jackie Liu <liu.yun@xxxxxxxxx>
• Re: [PATCH v2] scsi: bsg: fix errno when scsi_bsg_register_queue fails
  • From: Jackie Liu <liu.yun@xxxxxxxxx>
• Re: [PATCH v2] scsi: bsg: fix errno when scsi_bsg_register_queue fails
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] scsi: bsg: fix errno when scsi_bsg_register_queue fails
  • From: Jackie Liu <liu.yun@xxxxxxxxx>
• Re: [PATCH v2] scsi: bsg: fix errno when scsi_bsg_register_queue fails
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] scsi: bsg: Ignore bsg queue registration failures again
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Fusion MPT SAS Host: scsi 0:0:32:0: Wrong diagnostic page; asked for 10 got 0
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH v2] sr: don't use GFP_DMA
  • From: Baoquan He <bhe@xxxxxxxxxx>
• Re: [PATCH v2] sr: don't use GFP_DMA
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2] sr: don't use GFP_DMA
  • From: Baoquan He <bhe@xxxxxxxxxx>
• [PATCH] pmcraid: don't use GFP_DMA in pmcraid_alloc_sglist
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] snic: don't use GFP_DMA in snic_queue_report_tgt_req
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] myrs: don't use GFP_DMA
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] myrb: don't use GFP_DMA in myrb_pdev_slave_alloc
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] initio: don't use GFP_DMA in initio_probe_one
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v2] sr: don't use GFP_DMA
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] sr: don't use GFP_DMA in get_capabilities
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] ch: don't use GFP_DMA
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] sr: don't use GFP_DMA in get_capabilities
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v2] scsi: ufs: ufs-mediatek : Fix NULL vs IS_ERR checking in ufs_mtk_init_va09_pwr_ctrl
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• Re: [PATCH] scsi: ufs: ufs-mediatek : Fix NULL vs IS_ERR checking in ufs_mtk_init_va09_pwr_ctrl
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH] scsi: ufs: ufs-mediatek : Fix NULL vs IS_ERR checking in ufs_mtk_init_va09_pwr_ctrl
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• Re: [PATCH -next] scsi: efct: Use GFP_ATOMIC under spin lock
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH -next] scsi: efct: Use GFP_ATOMIC under spin lock
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 09/19] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 14/29] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] libiscsi: fix UAF when iscsi_conn_get_param and iscsi_conn_teardown concurrent
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH] libiscsi: fix UAF when iscsi_conn_get_param and iscsi_conn_teardown concurrent
  • From: michael.christie@xxxxxxxxxx
• [Bug 215353] VMWare LVM partitions not recognized, sees base disk, fails to Boot
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] scsi: vmw_pvscsi: Set residual data length conditionally
  • From: Alexey Makhalov <amakhalov@xxxxxxxxxx>
• [PATCH 24/25] mpi3mr: Fixes around reply request queues
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 25/25] mpi3mr: Bump driver version to 8.0.0.61.0
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 23/25] mpi3mr: Enhanced Task Management Support Reply handling
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 22/25] mpi3mr: use TM response codes from MPI3 headers
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 21/25] mpi3mr: Add iouring interface support in io-polled mode
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 20/25] mpi3mr: Print cable mngnt and temp threshold events
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 19/25] mpi3mr: Add support Prepare for Reset event
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 18/25] mpi3mr: Add Event acknowledgment logic
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 17/25] mpi3mr: Gracefully handle online FW update operation
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 16/25] mpi3mr: Detect async reset occurred in firmware
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 15/25] mpi3mr: Add IOC reinit function
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 14/25] mpi3mr: Handle offline FW activation in graceful manner
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 13/25] mpi3mr: code refactor of IOC init patch - part2
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 12/25] mpi3mr: code refactor of IOC init patch - part1
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 10/25] mpi3mr: Display IOC firmware package version
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 11/25] mpi3mr: Fault IOC when internal commands gets timeout
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 09/25] mpi3mr: Handling unaligned PLL in unmap cmnds
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 08/25] mpi3mr: Increase internal cmnds timeout to 60s
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 07/25] mpi3mr: Do access status validation before adding devices
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 06/25] mpi3mr: Add support for PCIe Managed Switch SES device
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 05/25] mpi3mr: Update MPI3 headers - part2
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 04/25] mpi3mr: Update MPI3 headers - part1
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 03/25] mpi3mr: Don't reset IOC if cmnds flush with reset status
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 02/25] mpi3mr: replace spin_lock with spin_lock_irqsave
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 01/25] mpi3mr: Add debug APIs based on logging_level bits
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH 00/25] mpi3mr: driver fixes and enhancements
  • From: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
• [PATCH] libiscsi: fix UAF when iscsi_conn_get_param and iscsi_conn_teardown concurrent
  • From: lixiaokeng <lixiaokeng@xxxxxxxxxx>
• [PATCH v2 14/15] scsi: libsas: Keep host active while processing events
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 15/15] scsi: hisi_sas: Use autosuspend for the host controller
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 12/15] scsi: libsas: Defer works of new phys during suspend
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 13/15] scsi: hisi_sas: Keep controller active between ISR of phyup and the event being processed
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 11/15] scsi: libsas: Refactor sas_queue_deferred_work()
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 10/15] scsi: libsas: Add flag SAS_HA_RESUMING
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 06/15] scsi: mvsas: Add spin_lock/unlock() to protect asd_sas_port->phy_list
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 09/15] scsi: libsas: Resume host while sending SMP IOs
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 07/15] scsi: libsas: Insert PORTE_BROADCAST_RCVD event for resuming host
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 08/15] scsi: hisi_sas: Add more logs for runtime suspend/resume
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 04/15] scsi: libsas: Add spin_lock/unlock() to protect asd_sas_port->phy_list
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 01/15] libsas: Don't always drain event workqueue for HA resume
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 03/15] scsi/block PM: Always set request queue runtime active in blk_post_runtime_resume()
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 05/15] scsi: hisi_sas: Fix some issues related to asd_sas_port->phy_list
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 00/15] Add runtime PM support for libsas
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v2 02/15] Revert "scsi: hisi_sas: Filter out new PHY up events during suspend"
  • From: chenxiang <chenxiang66@xxxxxxxxxxxxx>
• [PATCH v3 ] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: Yanling Song <songyl@xxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.16-rc5
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] SCSI fixes for 5.16-rc5
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [Bug 215353] VMWare LVM partitions not recognized, sees base disk, fails to Boot
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 215353] New: VMWare LVM partitions not recognized, sees base disk, fails to Boot
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH V7 0/5] x86/Hyper-V: Add Hyper-V Isolation VM support(Second part)
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Use struct_group() to initialize struct lpfc_cgn_info
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Use struct_group to isolate cast to larger object
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: hpsa: Remove an unused variable in 'hpsa_update_scsi_devices()'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/8] hisi_sas: Some misc patches
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [mpi3mr] RE: [PATCH 2/7] miscdevice: adding support for MPI3MR_MINOR(243)
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] efct: don't pass GFP_DMA to dma_alloc_coherent
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: Fix deadlock issue in ufshcd_wait_for_doorbell_clr()
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] qla2xxx: synchronize rport dev_loss_tmo setting
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v6 21/24] mpi3mr: add support of PM suspend and resume
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v6 21/24] mpi3mr: add support of PM suspend and resume
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v6 21/24] mpi3mr: add support of PM suspend and resume
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] blk-mq: avoid to iterate over stale request
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• RE: [PATCH] blk-mq: avoid to iterate over stale request
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• Re: [PATCH V7 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• [PATCH] scsi: qedf: potential dereference of null pointer
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• Re: [PATCH] block: reduce kblockd_mod_delayed_work_on() CPU consumption
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH] scsi: megaraid_sas: use max() to make code cleaner
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH] scsi: core: Switch to kvfree_rcu() API
  • From: Uladzislau Rezki <urezki@xxxxxxxxx>
• RE: [PATCH V7 4/5] scsi: storvsc: Add Isolation VM support for storvsc driver
  • From: Long Li <longli@xxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: ufs: Fix deadlock issue in ufshcd_wait_for_doorbell_clr()
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v4 16/17] scsi: ufs: Optimize the command queueing code
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] block: reduce kblockd_mod_delayed_work_on() CPU consumption
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] efct: don't pass GFP_DMA to dma_alloc_coherent
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 8/8] scsi: libsas: Decode SAM status and host byte codes
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 5/8] scsi: hisi_sas: Prevent parallel controller reset and control phy command
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 6/8] scsi: hisi_sas: Prevent parallel FLR and controller reset
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 7/8] scsi: hisi_sas: Fix phyup timeout on FPGA
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 4/8] scsi: hisi_sas: Factor out task prep and delivery code
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 3/8] scsi: hisi_sas: Pass abort structure for internal abort
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 2/8] scsi: hisi_sas: Make internal abort have no task proto
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 1/8] scsi: hisi_sas: Start delivery hisi_sas_task_exec() directly
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 0/8] hisi_sas: Some misc patches
  • From: John Garry <john.garry@xxxxxxxxxx>
• [Bug 215333] New: UAS keeps resetting disks
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] blk-mq: avoid to iterate over stale request
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• RE: [PATCH] blk-mq: avoid to iterate over stale request
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• Re: [PATCH] blk-mq: avoid to iterate over stale request
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 09/15] scsi: libsas: Resume sas host before sending SMP IOs
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 11/15] scsi: libsas: Refactor out sas_queue_deferred_work()
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 13/15] scsi: hisi_sas: Keep controller active between ISR of phyup and the event being processed
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 00/15] Add runtime PM support for libsas
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 15/15] scsi: hisi_sas: Use autosuspend for SAS controller
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 14/15] scsi: libsas: Keep sas host active until finished some work
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 10/15] scsi: libsas: Add a flag SAS_HA_RESUMING of sas_ha
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• RE: [PATCH] blk-mq: avoid to iterate over stale request
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• Re: [PATCH 08/15] scsi: hisi_sas: Add more prink for runtime suspend/resume
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 08/15] scsi: hisi_sas: Add more prink for runtime suspend/resume
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 07/15] scsi: libsas: Send event PORTE_BROADCAST_RCVD for valid ports
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH 02/15] Revert "scsi: hisi_sas: Filter out new PHY up events during suspend"
  • From: "chenxiang (M)" <chenxiang66@xxxxxxxxxxxxx>
• Re: [PATCH V7 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH v4 16/17] scsi: ufs: Optimize the command queueing code
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] blk-mq: avoid to iterate over stale request
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH V7 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• Re: [PATCH V7 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Tom Lendacky <thomas.lendacky@xxxxxxx>
• RE: [PATCH] block: reduce kblockd_mod_delayed_work_on() CPU consumption
  • From: Dexuan Cui <decui@xxxxxxxxxxxxx>
• Re: [PATCH V7 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• RE: [PATCH] blk-mq: avoid to iterate over stale request
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• RE: [PATCH V7 0/5] x86/Hyper-V: Add Hyper-V Isolation VM support(Second part)
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Improve SCSI abort handling
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: ufs: Improve SCSI abort handling
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: Improve SCSI abort handling
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3] qla2xxx: synchronize rport dev_loss_tmo setting
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• [PATCH] efct: don't pass GFP_DMA to dma_alloc_coherent
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] scsi: ufs: Improve SCSI abort handling
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V7 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH V7 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH] block: reduce kblockd_mod_delayed_work_on() CPU consumption
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH V7 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: Wei Liu <wei.liu@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH] block: reduce kblockd_mod_delayed_work_on() CPU consumption
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH] lpfc: Reintroduce old IRQ probe logic
  • From: Daniel Wagner <dwagner@xxxxxxx>
• Re: [PATCH 14/15] scsi: libsas: Keep sas host active until finished some work
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2] scsi: ufs: Fix deadlock issue in ufshcd_wait_for_doorbell_clr()
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 00/15] Add runtime PM support for libsas
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v3] qla2xxx: synchronize rport dev_loss_tmo setting
  • From: Daniel Wagner <dwagner@xxxxxxx>
• [PATCH] scsi: pm8001: Fix memory leak in pm8001_send_abort_all()
  • From: Jianglei Nie <niejianglei2021@xxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH v4 00/17] UFS patches for kernel v5.17
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• RE: [PATCH v4 00/17] UFS patches for kernel v5.17
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [PATCH] scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 16/17] scsi: ufs: Optimize the command queueing code
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v1] scsi: ufs: Fix deadlock issue in ufshcd_wait_for_doorbell_clr()
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v4 00/17] UFS patches for kernel v5.17
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 0/2] SYSFS_FLAG_FW_SEL_BOOT formatting fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi/be2iscsi: Remove non existing maintainer.
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/3] scsi: hisi_sas: Use devm_bitmap_zalloc() when applicable
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 0/9] lpfc: Update lpfc to revision 14.0.0.4
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: mptfusion: remove redundant variable r
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v3] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH V7 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH] scsi: hpsa: Remove an unused variable in 'hpsa_update_scsi_devices()'
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Use struct_group to isolate cast to larger object
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Use struct_group() to initialize struct lpfc_cgn_info
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4 16/17] scsi: ufs: Optimize the command queueing code
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 09/10] soc: qcom: support for generate, import and prepare key
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 08/10] scsi: ufs: add support for generate, import and prepare keys
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 07/10] qcom_scm: scm call for create, prepare and import keys
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 06/10] soc: qcom: add wrapped key support for ICE
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 05/10] scsi: ufs: prepare to support wrapped keys
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 04/10] soc: qcom: add HWKM library for storage encryption
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 03/10] qcom_scm: scm call for deriving a software secret
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 02/10] scsi: ufs: qcom: move ICE functionality to common library
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 01/10] soc: qcom: new common library for ICE functionality
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v1] scsi: ufs: Fix deadlock issue in ufshcd_wait_for_doorbell_clr()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v1] scsi: ufs: Fix deadlock issue in ufshcd_wait_for_doorbell_clr()
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH 15/17] scsi: lpfc: Use struct_group() to initialize struct lpfc_cgn_info
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v3] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH V7 5/5] net: netvsc: Add Isolation VM support for netvsc driver
  • From: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
• Re: [PATCH V7 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• RE: [PATCH v2] blk-mq: Fix blk_mq_tagset_busy_iter() for shared tags
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• Re: [mpi3mr] RE: [PATCH 2/7] miscdevice: adding support for MPI3MR_MINOR(243)
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• Re: [PATCH 11/15] scsi: libsas: Refactor out sas_queue_deferred_work()
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 10/15] scsi: libsas: Add a flag SAS_HA_RESUMING of sas_ha
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 09/15] scsi: libsas: Resume sas host before sending SMP IOs
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 07/15] scsi: libsas: Send event PORTE_BROADCAST_RCVD for valid ports
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 15/15] scsi: hisi_sas: Use autosuspend for SAS controller
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 13/15] scsi: hisi_sas: Keep controller active between ISR of phyup and the event being processed
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 08/15] scsi: hisi_sas: Add more prink for runtime suspend/resume
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 08/15] scsi: hisi_sas: Add more prink for runtime suspend/resume
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 02/15] Revert "scsi: hisi_sas: Filter out new PHY up events during suspend"
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v3] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH V7 4/5] scsi: storvsc: Add Isolation VM support for storvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V7 5/5] net: netvsc: Add Isolation VM support for netvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V7 3/5] hyper-v: Enable swiotlb bounce buffer for Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V7 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V7 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V7 0/5] x86/Hyper-V: Add Hyper-V Isolation VM support(Second part)
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [syzbot] general protection fault in scsi_queue_rq
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH v2 01/12] scsi: core: Suppress a kernel-doc warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] scsi: core: Suppress a kernel-doc warning
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 01/12] scsi: core: Suppress a kernel-doc warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: ufshcd-pltfrm: check the return value of kstrdup()
  • From: "Xiaoke Wang" <xkernel.wang@xxxxxxxxxxx>
• Re: [PATCH] scsi: ufs: ufshcd-pltfrm: check the return value of kstrdup()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [Bug 215311] New: Support ATA command passthrough for iSCSI -> SATA
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH V2] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: Yanling song <yanling.song@xxxxxxxxx>
• Re: [PATCH V2] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: Yanling song <yanling.song@xxxxxxxxx>
• Re: [PATCH V2] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: yanling.song@xxxxxxxxx
• Re: [GIT PULL] SCSI fixes for 5.16-rc4
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [syzbot] general protection fault in scsi_queue_rq
  • From: syzbot <syzbot+0796b72dc61f223d8cc5@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] SCSI fixes for 5.16-rc4
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] scsi: ufs: ufshcd-pltfrm: check the return value of kstrdup()
  • From: xkernel <xkernel.wang@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v6 00/14] genirq: Cleanup the abuse of irq_set_affinity_hint()
  • From: Nitesh Lal <nilal@xxxxxxxxxx>
• Re: [PATCH v6 00/14] genirq: Cleanup the abuse of irq_set_affinity_hint()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH v2] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2] scsi: elx: efct: Avoid a useless memset
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH V2] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [bug report] scsi: smartpqi: Update device removal management
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH V6 3/5] hyper-v: Enable swiotlb bounce buffer for Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH v6 00/14] genirq: Cleanup the abuse of irq_set_affinity_hint()
  • From: Nitesh Lal <nilal@xxxxxxxxxx>
• Re: [PATCH V6 3/5] hyper-v: Enable swiotlb bounce buffer for Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH V6 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] blk-mq: add helper of blk_mq_global_quiesce_wait()
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v3 2/3] block: don't delete queue kobject before its children
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 2/3] block: don't delete queue kobject before its children
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH V2] scsi:spraid: initial commit of Ramaxel spraid driver
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] block: don't delete queue kobject before its children
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: elx: efct: Avoid a useless memset
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] scsi: elx: efct: Avoid a useless memset
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] scsi: elx: efct: Avoid a useless memset
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] scsi: elx: efct: Avoid a useless memset
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] scsi: hpsa: Remove an unused variable in 'hpsa_update_scsi_devices()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• RE: [PATCH V6 5/5] net: netvsc: Add Isolation VM support for netvsc driver
  • From: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
• RE: [PATCH V6 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH V6 3/5] hyper-v: Enable swiotlb bounce buffer for Isolation VM
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• RE: [PATCH V6 5/5] net: netvsc: Add Isolation VM support for netvsc driver
  • From: "Michael Kelley (LINUX)" <mikelley@xxxxxxxxxxxxx>
• Re: [PATCH] scsi: docs: update notes about scsi_times_out
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 1/3] block: simplify calling convention of elv_unregister_queue()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] scsi: lpfc: Use struct_group() to initialize struct lpfc_cgn_info
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH] scsi: lpfc: Use struct_group to isolate cast to larger object
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v2] blk-mq: Fix blk_mq_tagset_busy_iter() for shared tags
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [PATCH v2] blk-mq: Fix blk_mq_tagset_busy_iter() for shared tags
  • From: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• RE: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH V6 4/5] scsi: storvsc: Add Isolation VM support for storvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• Re: [PATCH V2] target: iscsi: simplify the connection closing mechanism
  • From: Maurizio Lombardi <mlombard@xxxxxxxxxx>
• Re: [PATCH V6 5/5] net: netvsc: Add Isolation VM support for netvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• RE: [PATCH V6 4/5] scsi: storvsc: Add Isolation VM support for storvsc driver
  • From: Long Li <longli@xxxxxxxxxxxxx>
• [PATCH] scsi: csiostor: Fix memory leak in csio_wr_eq_destroy()
  • From: Jianglei Nie <niejianglei2021@xxxxxxx>
• [PATCH] drivers:scsi:remove unneeded variable
  • From: cgel.zte@xxxxxxxxx
• [PATCH] scsi: docs: update notes about scsi_times_out
  • From: Khazhismel Kumykov <khazhy@xxxxxxxxxx>
• RE: [PATCH V6 5/5] net: netvsc: Add Isolation VM support for netvsc driver
  • From: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
• [PATCH] scsi: lpfc: Use struct_group() to initialize struct lpfc_cgn_info
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• RE: [PATCH 0/4] Adds wrapped key support for inline storage encryption
  • From: Gaurav Kashyap <gaurkash@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 16/17] scsi: ufs: Optimize the command queueing code
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 16/17] scsi: ufs: Optimize the command queueing code
  • From: "Asutosh Das (asd)" <asutoshd@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] blk-mq: add helper of blk_mq_global_quiesce_wait()
  • From: Sagi Grimberg <sagi@xxxxxxxxxxx>
• Re: [PATCH V5 00/12] vhost: multiple worker support
  • From: Jason Wang <jasowang@xxxxxxxxxx>
• [PATCH v3 1/3] block: simplify calling convention of elv_unregister_queue()
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH v3 3/3] blk-crypto: show crypto capabilities in sysfs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH v3 2/3] block: don't delete queue kobject before its children
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH v3 0/3] block: show crypto capabilities in sysfs
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 0/4] Adds wrapped key support for inline storage encryption
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• RE: [PATCH 0/4] Adds wrapped key support for inline storage encryption
  • From: Gaurav Kashyap <gaurkash@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2] target: iscsi: simplify the connection closing mechanism
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH 02/15] scsi: add scsi_{get,put}_internal_cmd() helper
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH V6 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• RE: [PATCH] scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH V6 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH V6 2/5] x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has()
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V6 5/5] net: netvsc: Add Isolation VM support for netvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V6 4/5] scsi: storvsc: Add Isolation VM support for storvsc driver
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V6 3/5] hyper-v: Enable swiotlb bounce buffer for Isolation VM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>
• [PATCH V6 1/5] swiotlb: Add swiotlb bounce buffer remap function for HV IVM
  • From: Tianyu Lan <ltykernel@xxxxxxxxx>