To detect for the DMA_NONE (no data transfer) DMA direction,
sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA.
This test does not include the ATA_CMD_NCQ_NON_DATA command as this
command protocol is defined as ATA_PROT_NCQ_NODATA (equal to
ATA_PROT_FLAG_NCQ) and not as ATA_PROT_NODATA.
To include both NCQ and non-NCQ commands when testing for the DMA_NONE
DMA direction, use "!ata_is_data()".
Fixes: 176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Reviewed-by: John Garry <john.garry@xxxxxxxxxx>
Reviewed-by: Jack Wang <jinpu.wang@xxxxxxxxx>
---
drivers/scsi/libsas/sas_ata.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index e0030a093994..50f779088b6e 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -197,7 +197,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
task->total_xfer_len = qc->nbytes;
task->num_scatter = qc->n_elem;
task->data_dir = qc->dma_dir;
- } else if (qc->tf.protocol == ATA_PROT_NODATA) {
+ } else if (!ata_is_data(qc->tf.protocol)) {
task->data_dir = DMA_NONE;
} else {
for_each_sg(qc->sg, sg, qc->n_elem, si)
--
2.34.1
