As defined in table 126 of the SAS spec 1.1, use an enum for the DATAPRES
field, which makes reading the code easier.
Also change sas_ssp_task_response() to use a switch statement, which is
more suitable (than if-else), as suggested by Christoph.
Suggested-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Reviewed-by: Jack Wang <jinpu.wang@xxxxxxxxx>
Tested-by: Yihang Li <liyihang6@xxxxxxxxxxxxx>
---
drivers/scsi/aic94xx/aic94xx_tmf.c | 2 +-
drivers/scsi/isci/request.c | 7 ++++---
drivers/scsi/libsas/sas_task.c | 14 +++++++++-----
drivers/scsi/mvsas/mv_sas.c | 2 +-
include/scsi/sas.h | 7 +++++++
5 files changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
index 0eb6e206a2b4..2ba91eaaf0ee 100644
--- a/drivers/scsi/aic94xx/aic94xx_tmf.c
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -287,7 +287,7 @@ static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb,
fh = edb->vaddr + 16;
ru = edb->vaddr + 16 + sizeof(*fh);
res = ru->status;
- if (ru->datapres == 1) /* Response data present */
+ if (ru->datapres == SAS_DATAPRES_RESPONSE_DATA)
res = ru->resp_data[3];
#if 0
ascb->tag = fh->tag;
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 92394884fbeb..ac17e3a35d2c 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -1047,7 +1047,8 @@ request_started_state_tc_event(struct isci_request *ireq,
resp_iu = &ireq->ssp.rsp;
datapres = resp_iu->datapres;
- if (datapres == 1 || datapres == 2) {
+ if (datapres == SAS_DATAPRES_RESPONSE_DATA ||
+ datapres == SAS_DATAPRES_SENSE_DATA) {
ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
} else {
@@ -1730,8 +1731,8 @@ sci_io_request_frame_handler(struct isci_request *ireq,
resp_iu = &ireq->ssp.rsp;
- if (resp_iu->datapres == 0x01 ||
- resp_iu->datapres == 0x02) {
+ if (resp_iu->datapres == SAS_DATAPRES_RESPONSE_DATA ||
+ resp_iu->datapres == SAS_DATAPRES_SENSE_DATA) {
ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
} else {
diff --git a/drivers/scsi/libsas/sas_task.c b/drivers/scsi/libsas/sas_task.c
index 2966ead1d421..e9d291007817 100644
--- a/drivers/scsi/libsas/sas_task.c
+++ b/drivers/scsi/libsas/sas_task.c
@@ -15,11 +15,14 @@ void sas_ssp_task_response(struct device *dev, struct sas_task *task,
tstat->resp = SAS_TASK_COMPLETE;
- if (iu->datapres == 0)
+ switch (iu->datapres) {
+ case SAS_DATAPRES_NO_DATA:
tstat->stat = iu->status;
- else if (iu->datapres == 1)
+ break;
+ case SAS_DATAPRES_RESPONSE_DATA:
tstat->stat = iu->resp_data[3];
- else if (iu->datapres == 2) {
+ break;
+ case SAS_DATAPRES_SENSE_DATA:
tstat->stat = SAS_SAM_STAT_CHECK_CONDITION;
tstat->buf_valid_size =
min_t(int, SAS_STATUS_BUF_SIZE,
@@ -29,10 +32,11 @@ void sas_ssp_task_response(struct device *dev, struct sas_task *task,
if (iu->status != SAM_STAT_CHECK_CONDITION)
dev_warn(dev, "dev %016llx sent sense data, but stat(0x%x) is not CHECK CONDITION\n",
SAS_ADDR(task->dev->sas_addr), iu->status);
- }
- else
+ break;
+ default:
/* when datapres contains corrupt/unknown value... */
tstat->stat = SAS_SAM_STAT_CHECK_CONDITION;
+ }
}
EXPORT_SYMBOL_GPL(sas_ssp_task_response);
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index a8d1f3dd607a..b48ae26e29a9 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -1638,7 +1638,7 @@ static void mvs_set_sense(u8 *buffer, int len, int d_sense,
static void mvs_fill_ssp_resp_iu(struct ssp_response_iu *iu,
u8 key, u8 asc, u8 asc_q)
{
- iu->datapres = 2;
+ iu->datapres = SAS_DATAPRES_SENSE_DATA;
iu->response_data_len = 0;
iu->sense_data_len = 17;
iu->status = 02;
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 64154c1fed02..332a463d08ef 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -191,6 +191,13 @@ enum sas_gpio_reg_type {
SAS_GPIO_REG_TX_GP = 4,
};
+/* Response frame DATAPRES field */
+enum {
+ SAS_DATAPRES_NO_DATA = 0,
+ SAS_DATAPRES_RESPONSE_DATA = 1,
+ SAS_DATAPRES_SENSE_DATA = 2,
+};
+
struct dev_to_host_fis {
u8 fis_type; /* 0x34 */
u8 flags;
--
2.26.2
