NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a
register-device-to-host-FIS response is expected for it.
However, for an IO_SUCCESS case, mpi_sata_completion() expects a
set-device-bits-FIS for any ata task with an use_ncq field true, which
includes NCQ NON DATA commands.
Fix this to correctly treat NCQ NON DATA commands as non-data by also
testing for the DMA_NONE DMA direction.
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/pm8001/pm8001_hwi.c | 3 ++-
drivers/scsi/pm8001/pm80xx_hwi.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 9d982eb970fe..8095eb0b04f7 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -2418,7 +2418,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
len = sizeof(struct pio_setup_fis);
pm8001_dbg(pm8001_ha, IO,
"PIO read len = %d\n", len);
- } else if (t->ata_task.use_ncq) {
+ } else if (t->ata_task.use_ncq &&
+ t->data_dir != DMA_NONE) {
len = sizeof(struct set_dev_bits_fis);
pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
len);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 283b68d7da24..d9f0afe784e7 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2509,7 +2509,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
len = sizeof(struct pio_setup_fis);
pm8001_dbg(pm8001_ha, IO,
"PIO read len = %d\n", len);
- } else if (t->ata_task.use_ncq) {
+ } else if (t->ata_task.use_ncq &&
+ t->data_dir != DMA_NONE) {
len = sizeof(struct set_dev_bits_fis);
pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
len);
--
2.34.1
