Linux Renesas SOC
[Prev Page][Next Page]
- [PATCH v11 13/13] misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller
- [PATCH v11 12/13] MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4
- [PATCH v11 10/13] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- [PATCH v11 07/13] PCI: designware-ep: Expose dw_pcie_ep_exit() to module
- [PATCH v11 08/13] PCI: dwc: Add dw_pcie_num_lanes_setup()
- [PATCH v11 04/13] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
- [PATCH v11 06/13] PCI: Add PCI_EXP_LNKCAP_MLW macros
- [PATCH v11 05/13] PCI: dwc: Refactor PCIE_PORT_LINK_CONTROL handling
- [PATCH v11 01/13] PCI: dwc: Fix writing wrong value if snps,enable-cdm-check
- [PATCH v11 03/13] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
- [PATCH v11 00/13] PCI: rcar-gen4: Add R-Car Gen4 PCIe support
- [PATCH v11 02/13] PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction
- Re: [PATCH v2] arm64: dts: renesas: r9a07g044: Add Cortex-A55 PMU node
- Re: [PATCH 4/4] arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels
- Re: [PATCH 3/4] arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels
- Re: [PATCH v2 0/2] Share RZ/G2L SoC DTSI with RZ/V2L SoC
- RE: [PATCH v2 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH v2 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- From: Krzysztof Kozlowski
- [PATCH v3 4/4] clk: rs9: Add support for 9FGV0441
- [PATCH v3 3/4] clk: rs9: Support device specific dif bit calculation
- [PATCH v3 2/4] dt-bindings: clk: rs9: Add 9FGV0441
- [PATCH v3 1/4] clk: rs9: Check for vendor/device ID
- Re: [PATCH] i2c: dev: Fix bus callback return values
- [PATCH v2 3/3] arm64: dts: renesas: rzg2l-smarc: Use versa3 clk for audio mclk
- [PATCH v2 2/3] drivers: clk: Add support for versa3 clock driver
- [PATCH v2 0/3] Add Versa3 clock generator support
- [PATCH v2 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH 00/20] MODULE_LICENSE removals, fifth tranche
- Re: [PATCH] can: rcar_canfd: Print mnemotechnic error codes
- Re: [PATCH v2] can: rcar_canfd: Add transceiver support
- [PATCH 1/3] ARM: dts: armadillo800eva: Add I2C EEPROM for MAC address
- [PATCH 3/3] arm64: dts: renesas: ulcb: Add I2C EEPROM for PMIC
- [PATCH 2/3] arm64: dts: renesas: condor: Add I2C EEPROM for PMIC
- [PATCH 0/3] renesas: dts: Add remaining I2C EEPROMs
- Re: [PATCH] can: rcar_canfd: Print mnemotechnic error codes
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH 08/11] mmc: renesas_sdhi: remove R-Car H3 ES1.* handling
- RE: [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- Re: [PATCH 1/5] pinctrl: renesas: remove R-Car H3 ES1.* handling
- Re: [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- RE: [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- RE: [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- Re: [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- Re: [PATCH 3/8] pinctrl: renesas: Add support for 1.8V/2.5V I/O voltage levels
- Re: [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- RE: [PATCH RFC 2/3] drivers: clk: Add support for versa3 clock driver
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- From: Krzysztof Kozlowski
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- From: Krzysztof Kozlowski
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- From: Krzysztof Kozlowski
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- From: Krzysztof Kozlowski
- Re: [PATCH 3/8] pinctrl: renesas: Add support for 1.8V/2.5V I/O voltage levels
- Re: [PATCH] i2c: dev: Fix bus callback return values
- From: Bartosz Golaszewski
- Re: [PATCH 3/8] pinctrl: renesas: Add support for 1.8V/2.5V I/O voltage levels
- Re: [PATCH v2] can: rcar_canfd: Add transceiver support
- [PATCH] can: rcar_canfd: Print mnemotechnic error codes
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- [PATCH] i2c: dev: Fix bus callback return values
- Re: [PATCH 00/11] tree-wide: remove support for Renesas R-Car H3 ES1
- From: patchwork-bot+netdevbpf
- Re: [PATCH 3/5] dt-bindings: soc: renesas: remove R-Car H3 ES1.*
- Re: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Add OV5645 node
- Re: [PATCH] soc: renesas: rmobile-sysc: Use of_fwnode_handle() helper
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- From: Krzysztof Kozlowski
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- From: Krzysztof Kozlowski
- Re: [PATCH 06/11] thermal/drivers/rcar_gen3_thermal: remove R-Car H3 ES1.* handling
- Re: [PATCH] soc: renesas: rmobile-sysc: Use of_fwnode_handle() helper
- Re: [PATCH v2] can: rcar_canfd: Add transceiver support
- RE: [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- [linux-next:master] BUILD SUCCESS WITH WARNING fc31900c948610e7b5c2f15fb7795832c8325327
- Re: [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- RE: [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- [PATCH 3/3] arm64: defconfig: Enable RZ/V2M xHCI and USB3.1 DRD controller support
- [PATCH 0/3] ARM/arm64: defconfig updates for Renesas platforms
- [PATCH 1/3] ARM: shmobile: defconfig: Refresh for v6.3-rc1
- [PATCH 2/3] ARM: multi_v7_defconfig: Enable additional support for RZ/N1 platforms
- RE: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- [PATCH] [LOCAL] arm64: renesas: defconfig: Refresh for v6.3-rc1
- Re: [PATCH v10 04/12] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
- Re: [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- [PATCH 1/8] pinctrl: renesas: r8a77995: Retain POCCTRL0 register across suspend/resume
- [PATCH] pinctrl: renesas: Annotate sentinels in tables
- [PATCH 0/8] pinctrl: renesas: rcar: power-source improvements
- [PATCH 2/8] pinctrl: renesas: rcar: Phase out old SH_PFC_PIN_CFG_IO_VOLTAGE flag
- [PATCH 3/8] pinctrl: renesas: Add support for 1.8V/2.5V I/O voltage levels
- [PATCH] soc: renesas: rmobile-sysc: Use of_fwnode_handle() helper
- [PATCH 4/8] pinctrl: renesas: r8a77970: Add support for AVB power-source
- [PATCH 6/8] pinctrl: renesas: r8a77990: Add support for AVB power-source
- [PATCH 7/8] pinctrl: renesas: r8a77995: Add support for AVB power-source
- [PATCH 5/8] pinctrl: renesas: r8a77980: Add support for AVB/GE power-sources
- [PATCH v2] can: rcar_canfd: Add transceiver support
- [PATCH 8/8] pinctrl: renesas: r8a779g0: Add support for AVB/TSN power-sources
- Re: [PATCH v2 1/2] arm64: dts: renesas: r9a07g044: Use SoC specific macro for CPG and RESET
- From: Krzysztof Kozlowski
- Re: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Add OV5645 node
- Re: [PATCH 5/5] soc: renesas: remove r8a77950 arch
- Re: [PATCH -next] thermal/hwmon: Use devm_platform_ioremap_resource()
- RE: [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- Re: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Add OV5645 node
- Re: [PATCH 02/11] drm: rcar-du: remove R-Car H3 ES1.* workarounds
- Re: [PATCH/RFC 0/4] pinctrl: renesas: r8a779g0: Miscellaneous fixes
- Re: [PATCH 5/5] soc: renesas: remove r8a77950 arch
- Re: [PATCH 07/11] ravb: remove R-Car H3 ES1.* handling
- Re: [PATCH -next] thermal/hwmon: Use devm_platform_ioremap_resource()
- [PATCH v10 10/12] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- [PATCH v10 11/12] PCI: rcar-gen4-ep: Add R-Car Gen4 PCIe Endpoint support
- [PATCH v10 09/12] PCI: dwc: Add support for triggering legacy IRQs
- [PATCH v10 05/12] PCI: dwc: Refactor PCIE_PORT_LINK_CONTROL handling
- [PATCH v10 12/12] MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4
- [PATCH v10 08/12] PCI: dwc: Add dw_pcie_num_lanes_setup()
- [PATCH v10 06/12] PCI: Add PCI_EXP_LNKCAP_MLW macros
- [PATCH v10 04/12] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
- [PATCH v10 07/12] PCI: designware-ep: Expose dw_pcie_ep_exit() to module
- [PATCH v10 02/12] PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction
- [PATCH v10 00/12] PCI: rcar-gen4: Add R-Car Gen4 PCIe support
- [PATCH v10 01/12] PCI: dwc: Fix writing wrong value if snps,enable-cdm-check
- [PATCH v10 03/12] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host
- [PATCH -next] thermal/hwmon: Use devm_platform_ioremap_resource()
- [geert-renesas-drivers:master] BUILD SUCCESS e39111f42503aee4d2be3cfc31b068aa9529681a
- [geert-renesas-drivers:renesas-pinctrl-for-v6.4] BUILD SUCCESS b37d57e1daccbc1a0393d9207d5c48f9181fe85a
- [geert-renesas-drivers:renesas-clk] BUILD SUCCESS 1f04b7939704fce82d2bb5ef5561e2499a91170a
- renesas/master baseline-nfs: 159 runs, 27 regressions (renesas-devel-2023-03-07-v6.3-rc1)
- Re: [PATCH 05/11] media: renesas: fdp1: remove R-Car H3 ES1.* handling
- [geert-renesas-devel:master] BUILD SUCCESS 525eb92e46b94fe4a641aa2f6cc0481874cff436
- renesas/master igt-kms-rockchip: 1 runs, 10 regressions (renesas-devel-2023-03-07-v6.3-rc1)
- renesas/master v4l2-compliance on uvcvideo: 4 runs, 1 regressions (renesas-devel-2023-03-07-v6.3-rc1)
- Re: [PATCH 07/11] ravb: remove R-Car H3 ES1.* handling
- Re: [PATCH v3 07/51] cpuidle,psci: Push RCU-idle into driver
- [PATCH 11/11] usb: gadget: udc: renesas_usb3: remove R-Car H3 ES1.* handling
- [PATCH 04/11] media: rcar-vin: csi2: remove R-Car H3 ES1.* handling
- [PATCH 07/11] ravb: remove R-Car H3 ES1.* handling
- [PATCH 05/11] media: renesas: fdp1: remove R-Car H3 ES1.* handling
- [PATCH 02/11] drm: rcar-du: remove R-Car H3 ES1.* workarounds
- [PATCH 10/11] usb: host: xhci-rcar: remove R-Car H3 ES1.* handling
- [PATCH 09/11] usb: host: xhci-rcar: remove leftover quirk handling
- [PATCH 06/11] thermal/drivers/rcar_gen3_thermal: remove R-Car H3 ES1.* handling
- [PATCH 08/11] mmc: renesas_sdhi: remove R-Car H3 ES1.* handling
- [PATCH 03/11] media: rcar-vin: remove R-Car H3 ES1.* handling
- [PATCH 01/11] iommu/ipmmu-vmsa: remove R-Car H3 ES1.* handling
- [PATCH 00/11] tree-wide: remove support for Renesas R-Car H3 ES1
- Re: [PATCH v6 03/13] pinctrl: Add sysfs support
- Re: [PATCH v6 03/13] pinctrl: Add sysfs support
- RE: [PATCH v6 03/13] pinctrl: Add sysfs support
- Re: [PATCH v6 03/13] pinctrl: Add sysfs support
- Re: [PATCH 17/31] phy: renesas: phy-rcar-gen3-usb3: Convert to platform remove callback returning void
- Re: [PATCH 16/31] phy: renesas: phy-rcar-gen3-usb2: Convert to platform remove callback returning void
- renesas-drivers-2023-03-07-v6.3-rc1
- RE: [PATCH v6 06/13] drivers: pinctrl: renesas: Add RZ/G2L POEG driver support
- Re: [PATCH v6 06/13] drivers: pinctrl: renesas: Add RZ/G2L POEG driver support
- [PATCH 00/31] phy: Convert to platform remove callback returning void
- [PATCH 17/31] phy: renesas: phy-rcar-gen3-usb3: Convert to platform remove callback returning void
- [PATCH 16/31] phy: renesas: phy-rcar-gen3-usb2: Convert to platform remove callback returning void
- [PATCH 2/5] arm64: dts: renesas: remove R-Car H3 ES1.* devicetrees
- [PATCH 0/5] renesas: remove support for H3 ES1
- [PATCH 5/5] soc: renesas: remove r8a77950 arch
- [PATCH 3/5] dt-bindings: soc: renesas: remove R-Car H3 ES1.*
- [PATCH 4/5] soc: renesas: rcar-sysc: remove R-Car H3 ES1.* handling
- RE: [PATCH v6 06/13] drivers: pinctrl: renesas: Add RZ/G2L POEG driver support
- Re: [PATCH v6 06/13] drivers: pinctrl: renesas: Add RZ/G2L POEG driver support
- RE: [DO NOT APPLY PATCH v6 10/13] pinctrl: renesas: rzg2l-poeg: output-disable request from GPT when both outputs are low.
- RE: [PATCH v6 03/13] pinctrl: Add sysfs support
- RE: [PATCH v6 06/13] drivers: pinctrl: renesas: Add RZ/G2L POEG driver support
- RE: [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- [geert-renesas-devel:next] BUILD SUCCESS f8f70cfd66498277779fd34bd2266ea83ce3944b
- [geert-renesas-devel:renesas-dt-bindings-for-v6.4] BUILD SUCCESS da2102abcec034cf49fba9efa16596202a37710c
- [PATCH 4/4] arm64: renesas_defconfig: Enable DA7213/COMMON_CLK_PWM
- [PATCH 3/4] arm64: defconfig: Enable DA7213 Codec
- [PATCH 2/4] arm64: dts: renesas: r8a779g0: whitehawk: Add R-Car Sound support
- [PATCH 1/4] arm64: dts: renesas: r8a779g0: R-Car Sound support
- [PATCH 0/4] arm64: WhiteHawk: Add Sound support
- [geert-renesas-devel:master] BUILD SUCCESS 8b20ccdf60a58fb8e57af56ff0fb030a25a59871
- [geert-renesas-devel:renesas-dts-for-v6.4] BUILD SUCCESS 4077043be27f4cadf1d2b3d1be8ae13657d963a2
- Re: [DO NOT APPLY PATCH v6 10/13] pinctrl: renesas: rzg2l-poeg: output-disable request from GPT when both outputs are low.
- Re: [PATCH v6 03/13] pinctrl: Add sysfs support
- Re: [PATCH v6 06/13] drivers: pinctrl: renesas: Add RZ/G2L POEG driver support
- Re: [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- RE: [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- Re: [PATCH RFC 2/3] drivers: clk: Add support for versa3 clock driver
- Re: cpumask: re-introduce constant-sized cpumask optimizations
- renesas/master baseline: 375 runs, 60 regressions (renesas-devel-2023-03-06-v6.3-rc1)
- renesas/master baseline-nfs: 136 runs, 20 regressions (renesas-devel-2023-03-06-v6.3-rc1)
- Re: [PATCH 3/3] arm64: dts: renesas: rzg2l-smarc: Enable CRU and CSI nodes
- Re: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Add OV5645 node
- Re: cpumask: re-introduce constant-sized cpumask optimizations
- renesas/next baseline-nfs: 121 runs, 22 regressions (renesas-next-2023-03-06-v6.3-rc1)
- renesas/master igt-kms-rockchip: 1 runs, 10 regressions (renesas-devel-2023-03-06-v6.3-rc1)
- renesas/master cros-ec: 12 runs, 1 regressions (renesas-devel-2023-03-06-v6.3-rc1)
- Re: [PATCH 1/3] arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
- [linux-next:master] BUILD REGRESSION dc837c1a5137a8cf2e9432c1891392b6a66f4d8d
- renesas/next usb: 3 runs, 1 regressions (renesas-next-2023-03-06-v6.3-rc1)
- renesas/next cros-ec: 12 runs, 1 regressions (renesas-next-2023-03-06-v6.3-rc1)
- renesas/next sleep: 9 runs, 1 regressions (renesas-next-2023-03-06-v6.3-rc1)
- Re: (subset) [PATCH 0/4] RZ/G2L SSI: Update interrupt numbers
- Re: [PATCH] spi: Replace spi_pcpu_stats_totalize() macro by a C function
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- RE: [PATCH v4 1/2] media: dt-bindings: media: renesas,vsp1: Document RZ/V2L VSPD bindings
- RE: [PATCH v4 2/2] media: dt-bindings: media: renesas,fcp: Document RZ/{G2L,V2L} FCPVD bindings
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: cpumask: re-introduce constant-sized cpumask optimizations
- [DO NOT APPLY PATCH v6 12/13] pinctrl: renesas: rzg2l-poeg: output-disable request from GPT on dead time error
- [DO NOT APPLY PATCH v6 13/13] tools/poeg: Add test app for poeg
- [DO NOT APPLY PATCH v6 11/13] pwm: rzg2l-gpt: Add support for output disable on dead time error
- [DO NOT APPLY PATCH v6 10/13] pinctrl: renesas: rzg2l-poeg: output-disable request from GPT when both outputs are low.
- [DO NOT APPLY PATCH v6 09/13] pwm: rzg2l-gpt: Add support for output disable when both output low
- [DO NOT APPLY PATCH v6 08/13] pinctrl: renesas: rzg2l-poeg: Add support for GPT Output-Disable Request
- [DO NOT APPLY PATCH v6 07/13] pwm: rzg2l-gpt: Add support for output disable request from gpt
- [PATCH v6 06/13] drivers: pinctrl: renesas: Add RZ/G2L POEG driver support
- [PATCH v6 05/13] soc: renesas: Kconfig: Enable pin output disable for RZ/G2L SoC
- [PATCH v6 04/13] pinctrl: renesas: rzg2l: Add pin output disable support
- [PATCH v6 03/13] pinctrl: Add sysfs support
- [PATCH v6 02/13] pinctrl: Add poutdisops variable to struct pinctrl_desc
- [PATCH v6 01/13] pinctrl: core: Add pinctrl_get_device()
- [PATCH v6 00/13] Add pinctrl sysfs and RZ/G2L POEG support
- Re: [PATCH 28/41] rtc: rzn1: Convert to platform remove callback returning void
- RE: [PATCH v13 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH AUTOSEL 6.2 07/16] clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
- [PATCH AUTOSEL 6.1 07/15] clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
- [PATCH AUTOSEL 6.2 07/16] clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
- Re: [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- Re: [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- Re: [PATCH 2/3] of: irq: make callers of of_irq_parse_one() release the device node
- [PATCH 00/41] rtc: Convert to platform remove callback returning void
- [PATCH 28/41] rtc: rzn1: Convert to platform remove callback returning void
- Re: [PATCH 2/3] of: irq: make callers of of_irq_parse_one() release the device node
- From: Jean-Jacques Hiblot
- Re: [PATCH v5 00/18] Self-encapsulate the thermal zone device structure
- Re: [PATCH v5 02/18] thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
- Re: [PATCH v5 07/18] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
- Re: [PATCH v5 02/18] thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
- Re: [PATCH v5 02/18] thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
- Re: [PATCH v5 02/18] thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
- Re: [PATCH v5 00/18] Self-encapsulate the thermal zone device structure
- RE: [PATCH v5 0/9] Add RZ/G2L POEG support
- Re: [PATCH] driver core: bus: Handle early calls to bus_to_subsys()
- Re: [PATCH v2 4/4] clk: renesas: r9a06g032: improve clock tables
- Re: [PATCH v2 3/4] clk: renesas: r9a06g032: document structs
- Re: [PATCH 2/3] of: irq: make callers of of_irq_parse_one() release the device node
- [PATCH 3/3] of: irq: release the node after looking up for "interrupts-extended"
- From: Jean-Jacques Hiblot
- [PATCH 1/3] of: irq: make callers of of_irq_parse_raw() release the device node
- From: Jean-Jacques Hiblot
- [PATCH 2/3] of: irq: make callers of of_irq_parse_one() release the device node
- From: Jean-Jacques Hiblot
- [PATCH 0/3] of: irq: Fixes refcount issues with of_irq_parse_one()/of_irq_parse_raw()
- From: Jean-Jacques Hiblot
- [PATCH v2 4/4] clk: renesas: r9a06g032: improve clock tables
- [PATCH v2 3/4] clk: renesas: r9a06g032: document structs
- [PATCH v2 2/4] clk: renesas: r9a06g032: drop unused fields
- [PATCH v2 1/4] clk: renesas: r9a06g032: improve readability
- [PATCH v2 0/4] Renesas r9a06g032 clock table improvements
- Re: [PATCH 4/4] clk: renesas: r9a06g032: improve clock tables
- Re: [PATCH 3/3] of: irq: release the node after looking up for "interrupts-extended"
- [PATCH v5 07/18] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
- [PATCH v5 02/18] thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
- [PATCH v5 00/18] Self-encapsulate the thermal zone device structure
- Re: [PATCH 4/4] clk: renesas: r9a06g032: improve clock tables
- Re: [PATCH 3/4] clk: renesas: r9a06g032: document structs
- Re: [PATCH v4 02/19] thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
- Re: [PATCH 4/4] clk: renesas: r9a06g032: improve clock tables
- Re: [PATCH 3/4] clk: renesas: r9a06g032: document structs
- Re: [PATCH 2/4] clk: renesas: r9a06g032: drop unused fields
- Re: [PATCH] spi: Replace spi_pcpu_stats_totalize() macro by a C function
- [PATCH v14 3/4] pwm: Add support for RZ/G2L GPT
- [PATCH v14 4/4] pwm: rzg2l-gpt: Add support for gpt linking with poeg
- [PATCH v14 2/4] dt-bindings: pwm: rzg2l-gpt: Document renesas,poegs property
- [PATCH v14 1/4] dt-bindings: pwm: Add RZ/G2L GPT binding
- [PATCH v14 0/4] Add support for RZ/G2L GPT
- [PATCH] spi: Replace spi_pcpu_stats_totalize() macro by a C function
- Re: [PATCH 09/20] clk: renesas: remove MODULE_LICENSE in non-modules
- [PATCH 09/20] clk: renesas: remove MODULE_LICENSE in non-modules
- Re: [PATCH 00/20] MODULE_LICENSE removals, fifth tranche
- Re: [PATCH 09/20] clk: renesas: remove MODULE_LICENSE in non-modules
- [PATCH 04/20] pinctrl: renesas: remove MODULE_LICENSE in non-modules
- [PATCH 00/20] MODULE_LICENSE removals, fifth tranche
- RE: [PATCH v3 3/3] pwm: rzg2l-gpt: Add support for gpt linking with poeg
- [PATCH v4 07/19] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
- [PATCH v4 02/19] thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
- [PATCH v4 00/19] Self-encapsulate the thermal zone device structure
- Re: [PATCH] driver core: bus: Handle early calls to bus_to_subsys()
- Re: [PATCH] media: renesas: vsp1: blacklist r8a7795 ES1.*
- Re: [PATCH] media: renesas: vsp1: blacklist r8a7795 ES1.*
- Re: [REGRESSION PATCH RFC] net: phy: don't resume PHY via MDIO when iface is not up
- [PATCH 0/4] Renesas r9a06g032 clock table improvements
- [PATCH 3/4] clk: renesas: r9a06g032: document structs
- [PATCH 1/4] clk: renesas: r9a06g032: improve readability
- [PATCH 4/4] clk: renesas: r9a06g032: improve clock tables
- [PATCH 2/4] clk: renesas: r9a06g032: drop unused fields
- Re: [PATCH] drm: rcar-du: Fix a NULL vs IS_ERR() bug
- [PATCH v5 7/7] serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
- [PATCH v5 2/7] serial: 8250_em: Simplify probe()
- [PATCH v5 3/7] serial: 8250_em: Drop unused header file
- [PATCH v5 4/7] serial: 8250_em: Add missing break statement
- [PATCH v5 6/7] serial: 8250_em: Use pseudo offset for UART_FCR
- [PATCH v5 1/7] serial: 8250_em: Fix UART port type
- [PATCH v5 5/7] serial: 8250_em: Use devm_clk_get_enabled()
- [PATCH v5 0/7] Update Renesas {EMMA mobile, RZ/V2M} UART Port type
- Re: [PATCH] drm: rcar-du: Fix a NULL vs IS_ERR() bug
- [PATCH] drm: rcar-du: Fix a NULL vs IS_ERR() bug
- [PATCH AUTOSEL 6.1 26/58] drm: rcar-du: Fix setting a reserved bit in DPLLCR
- [PATCH AUTOSEL 6.2 26/60] drm: rcar-du: Fix setting a reserved bit in DPLLCR
- [PATCH AUTOSEL 6.1 25/58] drm: rcar-du: Add quirk for H3 ES1.x pclk workaround
- [PATCH AUTOSEL 6.2 25/60] drm: rcar-du: Add quirk for H3 ES1.x pclk workaround
- [PATCH v3 07/20] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
- [PATCH v3 02/20] thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers
- [PATCH v3 00/20] Self-encapsulate the thermal zone device structure
- Re: [REGRESSION PATCH RFC] net: phy: don't resume PHY via MDIO when iface is not up
- Re: [PATCH v3 00/12] fw_devlink improvements
- [PATCH v3 00/17] Self-encapsulate the thermal zone device structure
- Re: [PATCH v3 2/7] media: Add Y210, Y212 and Y216 formats
- Re: [PATCH v2 00/11] fw_devlink improvements
- Re: [PATCH v3 00/17] Self-encapsulate the thermal zone device structure
- [PATCH v3 00/17] Self-encapsulate the thermal zone device structure
- Re: [PATCH v2 2/2] drm: rcar-du: Write correct values in DORCR reserved fields
- Re: [PATCH v2 1/2] drm: rcar-du: Rename DORCR fields to make them 0-based
- Re: [PATCH v3 2/7] media: Add Y210, Y212 and Y216 formats
- Re: [REGRESSION PATCH RFC] net: phy: don't resume PHY via MDIO when iface is not up
- Re: [PATCH 1/3] media: i2c: adv748x: Fix lookup of DV timings
- Re: [REGRESSION PATCH RFC] net: phy: don't resume PHY via MDIO when iface is not up
- [REGRESSION PATCH RFC] net: phy: don't resume PHY via MDIO when iface is not up
- [PATCH v2 2/2] drm: rcar-du: Write correct values in DORCR reserved fields
- [PATCH v2 1/2] drm: rcar-du: Rename DORCR fields to make them 0-based
- [PATCH v2 0/2] drm: rcar-du: Fix more invalid register writes
- [PATCH] drm: rcar-du: Write correct values in DORCR reserved fields
- [PATCH 1/3] media: i2c: adv748x: Fix lookup of DV timings
- [PATCH 2/3] media: i2c: adv748x: Write initial DV timings to device
- [PATCH 3/3] media: i2c: adv748x: Report correct DV timings for pattern generator
- [PATCH 0/3] media: i2c: adv748x: Enable pattern generator without external HDMI source
- Re: [PATCH v2 04/16] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
- Re: [PATCH v2 01/16] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v2 01/16] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v13 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
- Re: [PATCH v3 2/7] media: Add Y210, Y212 and Y216 formats
- Re: [PATCH v13 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
- From: William Breathitt Gray
- Re: [PATCH v13 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
- Re: [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- From: Krzysztof Kozlowski
- Re: [PATCH 1/2] drm: rcar-du: Don't write unimplemented ESCR and OTAR registers on Gen3
- Re: [PATCH 2/2] drm: rcar-du: Disable alpha blending for DU planes used with VSP
- [geert-renesas-drivers:master] BUILD SUCCESS a7bda54c51c35d40762a64d2119fc94f94edc8b2
- [PATCH 2/2] drm: rcar-du: Disable alpha blending for DU planes used with VSP
- [PATCH 1/2] drm: rcar-du: Don't write unimplemented ESCR and OTAR registers on Gen3
- [PATCH 0/2] drm: rcar-du: Avoid writing reserved register fields
- [geert-renesas-devel:master] BUILD SUCCESS 5b96f8a28064829e9c31a235f5b4a3f566743b9c
- [geert-renesas-devel:renesas-dts-for-v6.4] BUILD SUCCESS da31195806d89e198e756d145de54a31eea17ef5
- Re: [PATCH v2 01/16] thermal/core: Add a thermal zone 'devdata' accessor
- [PATCH v2 04/16] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
- [PATCH v2 01/16] thermal/core: Add a thermal zone 'devdata' accessor
- [PATCH v2 00/17] Self-encapsulate the thermal zone device structure
- renesas-drivers-2023-02-21-v6.2
- renesas/master baseline: 278 runs, 47 regressions (renesas-devel-2023-02-21-v6.2)
- renesas/master baseline-nfs: 122 runs, 5 regressions (renesas-devel-2023-02-21-v6.2)
- Re: [PATCH net-next v3 5/6] net: stmmac: add support for RZ/N1 GMAC
- Re: [PATCH] driver core: bus: Handle early calls to bus_to_subsys()
- Re: [PATCH 12/21] driver core: bus: bus iterator cleanups
- [PATCH] driver core: bus: Handle early calls to bus_to_subsys()
- Re: [PATCH net-next] net: phy: update obsolete comment about PHY_STARTING
- Re: [PATCH net-next v4 0/3] net: dsa: rzn1-a5psw: add support for vlan and .port_bridge_flags
- Re: [PATCH net-next] net: phy: update obsolete comment about PHY_STARTING
- [PATCH net-next] net: phy: update obsolete comment about PHY_STARTING
- [PATCH net-next v4 3/3] net: dsa: rzn1-a5psw: add vlan support
- [PATCH net-next v4 2/3] net: dsa: rzn1-a5psw: add support for .port_bridge_flags
- [PATCH net-next v4 1/3] net: dsa: rzn1-a5psw: use a5psw_reg_rmw() to modify flooding resolution
- [PATCH net-next v4 0/3] net: dsa: rzn1-a5psw: add support for vlan and .port_bridge_flags
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [PATCH] net: phy: micrel: drop superfluous use of temp variable
- [geert-renesas-devel:master] BUILD SUCCESS 9737ff6b7ac85bfd246c51d8df015cb8635f35c5
- Re: [PATCH] net: phy: micrel: drop superfluous use of temp variable
- [PATCH] net: phy: micrel: drop superfluous use of temp variable
- renesas/master baseline: 410 runs, 63 regressions (renesas-devel-2023-02-20-v6.2)
- renesas/master baseline-nfs: 192 runs, 3 regressions (renesas-devel-2023-02-20-v6.2)
- RE: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH net-next 5/5] net: dsa: mv88e6xxx: implementation of dynamic ATU entries
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- RE: [PATCH RFC 0/3] Add Versa3 clock generator support
- [PATCH RFC 3/3] arm64: dts: renesas: rzg2l-smarc: Use versa3 clk for audio mclk
- [PATCH RFC 2/3] drivers: clk: Add support for versa3 clock driver
- [PATCH RFC 1/3] dt-bindings: clock: Add Renesas versa3 clock generator bindings
- [PATCH RFC 0/3] Add Versa3 clock generator support
- renesas/master igt-kms-rockchip: 1 runs, 10 regressions (renesas-devel-2023-02-20-v6.2)
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- RE: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- From: AngeloGioacchino Del Regno
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH 3/4] arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v1 04/17] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- Re: [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- [PATCH v1 01/17] thermal/core: Add a thermal zone 'devdata' accessor
- [PATCH v1 04/17] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()
- [PATCH v1 00/17] Self-encapsulate the thermal zone device structure
- Re: [PATCH 1/4] ASoC: dt-bindings: renesas,rz-ssi: Update interrupts and interrupt-names properties
- From: Krzysztof Kozlowski
- RE: [PATCH 2/4] ASoC: sh: rz-ssi: Update interrupt handling for half duplex channels
- Re: [PATCH] dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
- [PATCH 3/4] arm64: dts: renesas: r9a07g044: Update IRQ numbers for SSI channels
- [PATCH 4/4] arm64: dts: renesas: r9a07g043: Update IRQ numbers for SSI channels
- [PATCH 2/4] ASoC: sh: rz-ssi: Update interrupt handling for half duplex channels
- [PATCH 1/4] ASoC: dt-bindings: renesas,rz-ssi: Update interrupts and interrupt-names properties
- [PATCH 0/4] RZ/G2L SSI: Update interrupt numbers
- Re: [PATCH net-next 5/5] net: dsa: mv88e6xxx: implementation of dynamic ATU entries
- RE: [PATCH v4 6/6] serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
- RE: [PATCH v4 2/6] serial: 8250_em: Drop slab.h
- Re: [PATCH v4 6/6] serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
- Re: [PATCH v4 2/6] serial: 8250_em: Drop slab.h
- RE: [PATCH v4 4/6] serial: 8250_em: Update port type as PORT_16750
- RE: [PATCH v4 6/6] serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
- RE: [PATCH v4 2/6] serial: 8250_em: Drop slab.h
- RE: [PATCH v4 1/6] serial: 8250_em: Use dev_err_probe()
- Re: [PATCH v4 6/6] serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
- Re: [PATCH v4 4/6] serial: 8250_em: Update port type as PORT_16750
- Re: [PATCH v4 2/6] serial: 8250_em: Drop slab.h
- Re: [PATCH v4 1/6] serial: 8250_em: Use dev_err_probe()
- RE: [PATCH v13 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- RE: [PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR
- RE: [PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR
- RE: [PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR
- RE: [PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR
- RE: [PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR
- RE: [PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR
- Re: [PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR
- [PATCH v4 6/6] serial: 8250_em: Add serial8250_em_{reg_update(),out_helper()}
- [PATCH v4 5/6] serial: 8250_em: Use pseudo offset for UART_FCR
- [PATCH v4 4/6] serial: 8250_em: Update port type as PORT_16750
- [PATCH v4 3/6] serial: 8250_em: Use devm_clk_get_enabled()
- [PATCH v4 2/6] serial: 8250_em: Drop slab.h
- [PATCH v4 1/6] serial: 8250_em: Use dev_err_probe()
- [PATCH v4 0/6] Update Renesas {EMMA mobile, RZ/V2M} UART Port type
- Re: [PATCH v9 6/8] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- Re: [PATCH v4] media: renesas: vsp1: Add underrun debug print
- [PATCH v13 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- [PATCH v13 5/6] MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
- [PATCH v13 4/6] counter: Add Renesas RZ/G2L MTU3a counter driver
- [PATCH v13 3/6] Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
- [PATCH v13 2/6] mfd: Add Renesas RZ/G2L MTU3a core driver
- [PATCH v13 1/6] dt-bindings: timer: Document RZ/G2L MTU3a bindings
- [PATCH v13 0/6] Add RZ/G2L MTU3a Core, Counter and pwm driver
- [PATCH 3/3] arm64: dts: renesas: rzg2l-smarc: Enable CRU and CSI nodes
- [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Add OV5645 node
- [PATCH 1/3] arm64: dts: renesas: r9a07g044: Add CSI and CRU nodes
- [PATCH 0/3] RZ/G2L: Add CRU, CSI support
- [PATCH 0/2] arm64: dts: renesas: Remove bogus voltages from OPP table
- [PATCH 1/2] arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table
- [PATCH 2/2] arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table
- [PATCH 2/2] clk: renesas: r8a77980: Add Z2 clock
- [PATCH 1/2] clk: renesas: r8a77970: Add Z2 clock
- [PATCH 0/2] clk: renesas: R-Car V3M/V3H: Add Z2 clocks
- Re: [PATCH] ASoC: rsnd: adg: Fix BRG typos
- RE: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- RE: [PATCH v9 6/8] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- Re: [PATCH] dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
- From: Krzysztof Kozlowski
- RE: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- RE: [PATCH v9 5/8] PCI: dwc: Add support for triggering legacy IRQs
- [PATCH] media: renesas: vsp1: Align VSPD startup to HW manual
- [PATCH v4] media: renesas: vsp1: Add underrun debug print
- [geert-renesas-drivers:renesas-pinctrl-for-v6.4] BUILD SUCCESS 5fc2a7f14e3c29aff5336f141b8c58906e7193cb
- [geert-renesas-devel:renesas-dt-bindings-for-v6.4] BUILD SUCCESS b6774025f7d46b87c7a2c5874ce17f4b147c7695
- [geert-renesas-drivers:renesas-clk-for-v6.4] BUILD SUCCESS 6521cb4af294529a068e33b32731a415e7a64433
- Re: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH v3 00/12] fw_devlink improvements
- RE: [PATCH] spi: sh-msiof: Enforce fixed DTDL for R-Car H3
- [geert-renesas-devel:renesas-dts-for-v6.4] BUILD SUCCESS 2ef9a769490885c1a7f61eb7b33984375bce64e9
- [geert-renesas-devel:master] BUILD SUCCESS 1bb9ffce74c1457d2f9f14628ee9a243929bdab6
- Re: [PATCH] ASoC: rsnd: adg: Fix BRG typos
- RE: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH v9 6/8] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- Re: [PATCH v9 5/8] PCI: dwc: Add support for triggering legacy IRQs
- [PATCH] ASoC: rsnd: adg: Fix BRG typos
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- RE: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH 2/2] media: i2c: adv7604: Fix range of hue control
- Re: [PATCH 1/2] media: i2c: adv7604: Enable video adjustment
- Re: [PATCH v3 00/12] fw_devlink improvements
- From: Jean-Philippe Brucker
- RE: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree
- Re: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree
- RE: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH 3/3] drm: rcar-du: lvds: Fix LVDS PLL disable on D3/E3
- Re: [PATCH v3] media: renesas: vsp1: Add underrun debug print
- Re: [PATCH 2/3] drm: rcar-du: lvds: Move LVDS enable code to separate code section
- Re: [PATCH v12 6/6] pwm: Add Renesas RZ/G2L MTU3a PWM driver
- Re: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree
- Re: [PATCH 3/3] media: dt-bindings: media: renesas,vin: Add binding for V4H
- Re: [PATCH 2/3] media: dt-bindings: media: renesas,csi2: Add binding for V4H
- Re: [PATCH 1/3] media: dt-bindings: media: renesas,isp: Add binding for V4H
- Re: [PATCH] spi: sh-msiof: Enforce fixed DTDL for R-Car H3
- Re: [PATCH v3 00/12] fw_devlink improvements
- Re: [PATCH v3] media: renesas: vsp1: Add underrun debug print
- Re: [PATCH 3/3] drm: rcar-du: lvds: Fix LVDS PLL disable on D3/E3
- Re: [PATCH 2/3] drm: rcar-du: lvds: Move LVDS enable code to separate code section
- Re: [PATCH 1/3] drm: rcar-du: lvds: Call function directly instead of through pointer
- Re: [GIT PULL] clk: renesas: Updates for v6.3 (take three)
- Re: [PATCH 3/3] media: dt-bindings: media: renesas,vin: Add binding for V4H
- Re: [PATCH 1/3] media: dt-bindings: media: renesas,isp: Add binding for V4H
- Re: [PATCH 2/3] media: dt-bindings: media: renesas,csi2: Add binding for V4H
- Re: [PATCH v3] media: renesas: vsp1: Add underrun debug print
- Re: [PATCH net-next 5/5] net: dsa: mv88e6xxx: implementation of dynamic ATU entries
- RE: [PATCH] arm64: dts: renesas: rzg2ul-smarc-som: Enable serial NOR flash
- [PATCH v3] media: renesas: vsp1: Add underrun debug print
- Re: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree
- Re: [PATCH v2 1/2] dt-bindings: soc: renesas: renesas.yaml: add renesas,rzn1d400-eb compatible
- Re: [PATCH 1/2] arm64: dts: renesas: r8a779g0: Add and connect all CSI-2, ISP and VIN nodes
- Re: [PATCH 2/2] arm64: dts: renesas: white-hawk: Add and connect MAX96712
- Re: [PATCH] dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
- Re: [PATCH v2] media: renesas: vsp1: Add underrun debug print
- [PATCH v2] media: renesas: vsp1: Add underrun debug print
- Re: [PATCH] dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
- Re: [PATCH v3 12/12] arm64: dts: renesas: rzv2mevk2: Enable USB3 role switch
- Re: [PATCH v3 11/12] arm64: dts: renesas: rzv2mevk2: Enable USB3 DRD, Peripheral and Host
- Re: [PATCH v3 10/12] arm64: dts: renesas: r9a09g011: Add USB3 DRD, device and host nodes
- Re: [PATCH] dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
- Re: [PATCH] arm64: dts: renesas: r8a779f0: use proper labels for thermal zones
- [PATCH] dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
- Re: [PATCH] arm64: dts: renesas: rzg2ul-smarc-som: Enable serial NOR flash
- Re: [PATCH] arm64: dts: renesas: rzv2m evk: Add uart0 pins
- Re: [PATCH net-next v3 6/6] ARM: dts: r9a06g032: describe GMAC1
- Re: [PATCH v2] arm64: dts: renesas: v2mevk2: Add uSD card and eMMC support
- Re: [PATCH] clk: renesas: r8a77995: Fix VIN parent clock
- RE: [PATCH v3 1/3] serial: 8250_em: Use dev_err_probe()
- RE: [PATCH v6 00/19] Add RZ/G2L Display support
- Re: [PATCH v4 4/4] arm64: dts: renesas: rzv2m evk: Enable pwm
- [PATCH] clk: renesas: r8a77995: Fix VIN parent clock
- Re: [PATCH 2/2] arm64: dts: renesas: draak: Add overlay for CVBS input
- Re: [PATCH 2/2] arm64: dts: renesas: draak: Add overlay for CVBS input
- Re: [PATCH 2/3] drm: rcar-du: lvds: Move LVDS enable code to separate code section
- renesas/master baseline: 389 runs, 52 regressions (renesas-devel-2023-02-13-v6.2-rc8)
- renesas/master baseline-nfs: 185 runs, 8 regressions (renesas-devel-2023-02-13-v6.2-rc8)
- [PATCH 3/3] drm: rcar-du: lvds: Fix LVDS PLL disable on D3/E3
- [PATCH 2/3] drm: rcar-du: lvds: Move LVDS enable code to separate code section
- [PATCH 1/3] drm: rcar-du: lvds: Call function directly instead of through pointer
- [PATCH 0/3] drm: rcar-du: Fix vblank wait timeout when stopping LVDS output
- Re: [PATCH v3] PCI: Fix dropping valid root bus resources with .end = zero
- renesas/master igt-kms-rockchip: 1 runs, 10 regressions (renesas-devel-2023-02-13-v6.2-rc8)
- [geert-renesas-devel:master] BUILD SUCCESS 1114d4a0bbbebed7e53c9c2279c0c7adab6ca959
- Re: [PATCH] clk: renesas: r8a77980: Add VIN clocks
- Re: [PATCH 3/3] clk: renesas: r8a779g0: Add VIN clocks
- Re: [PATCH 2/3] clk: renesas: r8a779g0: Add ISPCS clocks
- Re: remove arch/sh
- From: John Paul Adrian Glaubitz
- Re: [PATCH 1/3] clk: renesas: r8a779g0: Add CSI-2 clocks
- Re: [PATCH 3/3] media: rcar-csi2: Add support for C-PHY on R-Car V4H
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH 1/3] media: rcar-csi2: Prepare for Gen4 support
- RE: [PATCH v3 2/3] serial: 8250_em: Update RZ/V2M port type as PORT_16750
- Re: [PATCH 3/3] media: rcar-csi2: Add support for C-PHY on R-Car V4H
- Re: [PATCH 1/3] media: rcar-csi2: Prepare for Gen4 support
- Re: [PATCH] thermal: Remove core header inclusion from drivers
- Re: [PATCH v2 1/2] arm64: dts: renesas: r9a07g044: Use SoC specific macro for CPG and RESET
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v2 0/2] Share RZ/G2L SoC DTSI with RZ/V2L SoC
- Re: [PATCH v2 2/2] arm64: dts: renesas: r9a07g054: Reuse RZ/G2L SoC DTSI
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v2 1/2] arm64: dts: renesas: r9a07g044: Use SoC specific macro for CPG and RESET
- Re: [PATCH v3 09/12] of: property: Simplify of_link_to_phandle()
- Re: [PATCH v3 09/12] of: property: Simplify of_link_to_phandle()
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH] thermal: Remove core header inclusion from drivers
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH 2/2] media: i2c: adv7604: Fix range of hue control
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- [GIT PULL] clk: renesas: Updates for v6.3 (take three)
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH 1/2] dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
- From: Krzysztof Kozlowski
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- RE: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 0/3] Update Renesas RZ/V2M UART Port type
- Re: [PATCH v2 1/4] clk: rs9: Check for vendor/device ID
- Re: [PATCH v3 2/3] serial: 8250_em: Update RZ/V2M port type as PORT_16750
- Re: [PATCH v3 1/3] serial: 8250_em: Use dev_err_probe()
- Re: [PATCH 7/9] arm64: dts: renesas: r8a779g0: whitehawk: Add R-Car Sound support
- RE: [PATCH v9 2/8] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
- RE: [PATCH v9 6/8] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- RE: [PATCH v9 6/8] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- Re: [PATCH v9 2/8] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint
- Re: [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v3 2/3] serial: 8250_em: Update RZ/V2M port type as PORT_16750
- Re: [PATCH] thermal: Remove core header inclusion from drivers
- Re: [PATCH] configure.ac: Add option to disable compilation of v4l2-tracer
- Re: [PATCH 1/2] arm64: dts: renesas: draak: Make HDMI the default video input
- Re: [PATCH 2/2] arm64: dts: renesas: draak: Add overlay for CVBS input
- [RFT/PATCH] media: rcar-vin: Add support for RAW10 on V3U
- [PATCH] media: rcar-vin: Select correct interrupt mode for V4L2_FIELD_ALTERNATE
- [PATCH 2/2] media: rcar-vin: Fix NV12 size alignment
- [PATCH 1/2] media: rcar-vin: Gen3 can not scale NV12
- [PATCH 0/2] media: rcar-vin: Fix issues with NV12 on Gen3
- Re: [PATCH] configure.ac: Add option to disable compilation of v4l2-tracer
- [PATCH 2/2] arm64: dts: renesas: draak: Add overlay for CVBS input
- [PATCH 1/2] arm64: dts: renesas: draak: Make HDMI the default video input
- [PATCH 0/2] arm64: dts: renesas: draak: Make HDMI default video source
- Re: [PATCH] thermal: Remove core header inclusion from drivers
- From: srinivas pandruvada
- [PATCH] clk: renesas: r8a77980: Add VIN clocks
- [PATCH 1/2] arm64: dts: renesas: r8a779g0: Add and connect all CSI-2, ISP and VIN nodes
- [PATCH 2/2] arm64: dts: renesas: white-hawk: Add and connect MAX96712
- [PATCH 0/2] arm64: dts: renesas: white-hawk: Wire-up video capture support
- [PATCH] media: rcar-vin: Add support for R-Car V4H
- [PATCH] media: rcar-isp: Add support for R-Car V4H
- [PATCH 3/3] media: rcar-csi2: Add support for C-PHY on R-Car V4H
- [PATCH 2/3] media: rcar-csi2: Prepare for C-PHY support
- [PATCH 1/3] media: rcar-csi2: Prepare for Gen4 support
- [PATCH 0/3] media: rcar-csi2: Add support for V4H
- [PATCH] media: staging: max96712: Add support for 3-lane C-PHY
- [PATCH 3/3] media: dt-bindings: media: renesas,vin: Add binding for V4H
- [PATCH 1/3] media: dt-bindings: media: renesas,isp: Add binding for V4H
- [PATCH 2/3] media: dt-bindings: media: renesas,csi2: Add binding for V4H
- [PATCH 0/3] media: dt-bindings: media: Add bindings for video capture on R-Car V4H
- [PATCH 3/3] clk: renesas: r8a779g0: Add VIN clocks
- [PATCH 2/3] clk: renesas: r8a779g0: Add ISPCS clocks
- [PATCH 1/3] clk: renesas: r8a779g0: Add CSI-2 clocks
- [PATCH 0/3] clk: renesas: r8a779g0: Add clocks for video capture
- Re: [PATCH RFT 0/3] drivers/thermal/rcar_gen3_thermal: add Gen4 fuse support
- [PATCH] configure.ac: Add option to disable compilation of v4l2-tracer
- Re: [PATCH 2/2] media: i2c: adv7604: Fix range of hue control
- [PATCH RFT 3/3] drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4
- [PATCH RFT 1/3] drivers/thermal/rcar_gen3_thermal: introduce 'info' structure
- [PATCH RFT 2/3] drivers/thermal/rcar_gen3_thermal: refactor reading fuses into seprarate function
- [PATCH RFT 0/3] drivers/thermal/rcar_gen3_thermal: add Gen4 fuse support
- Re: [PATCH] thermal: Remove core header inclusion from drivers
- [geert-renesas-drivers:renesas-clk-for-v6.3] BUILD SUCCESS b1dec4e78599a2ce5bf8557056cd6dd72e1096b0
- Re: [PATCH net-next v3 0/4] net: renesas: rswitch: Improve TX timestamp accuracy
- From: patchwork-bot+netdevbpf
- Re: [PATCH] thermal: Remove core header inclusion from drivers
- Re: [PATCH/RFC] arm64: dts: renesas: draak: Add overlay for HDMI input
- [PATCH 2/2] media: i2c: adv7604: Fix range of hue control
- [PATCH 1/2] media: i2c: adv7604: Enable video adjustment
- [PATCH 0/2] media: i2c: adv7604: Fix handling of video adjustments
- Re: [PATCH v9 6/8] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- Re: [PATCH/RFC] arm64: dts: renesas: draak: Add overlay for HDMI input
- Re: [PATCH/RFC] arm64: dts: renesas: draak: Add overlay for HDMI input
- Re: [PATCH v3 00/12] fw_devlink improvements
- [PATCH/RFC] arm64: dts: renesas: draak: Add overlay for HDMI input
- Re: [PATCH v3 00/12] fw_devlink improvements
- [PATCH v3 0/3] Update Renesas RZ/V2M UART Port type
- [PATCH v3 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- [PATCH v3 2/3] serial: 8250_em: Update RZ/V2M port type as PORT_16750
- [PATCH v3 1/3] serial: 8250_em: Use dev_err_probe()
- Re: [PATCH v3 00/12] fw_devlink improvements
- RE: [PATCH v2 2/3] serial: 8250_em: Update RZ/V2M port type as PORT_16750
- RE: [PATCH v2 1/3] serial: 8250_em: Use dev_err_probe()
- RE: [PATCH v2 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v2 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v2 1/3] serial: 8250_em: Use dev_err_probe()
- Re: [PATCH v9 6/8] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support
- RE: [PATCH v2 3/3] serial: 8250_em: Add serial_out() to struct serial8250_em_hw_info
- Re: [PATCH v2 2/3] serial: 8250_em: Update RZ/V2M port type as PORT_16750
- Re: [PATCH v2 1/3] serial: 8250_em: Use dev_err_probe()
- [geert-renesas-drivers:topic/r8a779g0-thermal-v1] BUILD SUCCESS 137e3e210b556e8c1d85cbd5aeb44e7f50b9b307
- RE: [PATCH v2 2/3] serial: 8250_em: Update RZ/V2M port type as PORT_16750
[Index of Archives]
[Linux Samsung SOC]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]