[PATCH v7 5/6] cache: Add L2 cache management for Andes AX45MP RISC-V core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.

IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.

The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate

More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf

As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.

Example PMA region passes as a DT node from OpenSBI:
    reserved-memory {
        #address-cells = <2>;
        #size-cells = <2>;
        ranges;

        pma_resv0@58000000 {
            compatible = "shared-dma-pool";
            reg = <0x0 0x58000000 0x0 0x08000000>;
            no-map;
            linux,dma-default;
        };
    };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v6 -> v7
* Implemented flush callback
* Dropped using riscv_dma_noncoherent_cmo_ops

v5 -> v6
* Moved driver to cache folder
* Switched to new API for CMO

v4 -> v5
* Dropped code for configuring L2 cache
* Dropped code for configuring PMA
* Updated commit message
* Added comments
* Changed static branch enable/disable order

RFC v3 -> v4
* Made use of runtime patching instead of compile time
* Now just exposing single function ax45mp_no_iocp_cmo() for CMO handling
* Added a check to make sure cache line size is always 64 bytes
* Renamed folder rzf -> rzfive
* Improved Kconfig description
* Dropped L2 cache configuration
* Dropped unnecessary casts
* Fixed comments pointed by Geert.
---
 MAINTAINERS                  |   8 ++
 drivers/Kconfig              |   2 +
 drivers/Makefile             |   1 +
 drivers/cache/Kconfig        |  10 ++
 drivers/cache/Makefile       |   3 +
 drivers/cache/ax45mp_cache.c | 229 +++++++++++++++++++++++++++++++++++
 6 files changed, 253 insertions(+)
 create mode 100644 drivers/cache/Kconfig
 create mode 100644 drivers/cache/Makefile
 create mode 100644 drivers/cache/ax45mp_cache.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 258fa89de965..921a96859530 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19897,6 +19897,14 @@ S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/staging/
 
+STANDALONE CACHE CONTROLLER DRIVERS
+M:	Conor Dooley <conor@xxxxxxxxxx>
+L:	linux-riscv@xxxxxxxxxxxxxxxxxxx
+S:	Maintained
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
+F:	drivers/cache
+F:	include/cache
+
 STARFIRE/DURALAN NETWORK DRIVER
 M:	Ion Badulescu <ionut@xxxxxxxxxx>
 S:	Odd Fixes
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 968bd0a6fd78..44abd2cba3a3 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -15,6 +15,8 @@ source "drivers/base/Kconfig"
 
 source "drivers/bus/Kconfig"
 
+source "drivers/cache/Kconfig"
+
 source "drivers/connector/Kconfig"
 
 source "drivers/firmware/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 20b118dca999..db5a8115093f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -11,6 +11,7 @@ ifdef building_out_of_srctree
 MAKEFLAGS += --include-dir=$(srctree)
 endif
 
+obj-y				+= cache/
 obj-y				+= irqchip/
 obj-y				+= bus/
 
diff --git a/drivers/cache/Kconfig b/drivers/cache/Kconfig
new file mode 100644
index 000000000000..5478adff3d88
--- /dev/null
+++ b/drivers/cache/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Cache Drivers"
+
+config AX45MP_L2_CACHE
+	bool "Andes Technology AX45MP L2 Cache controller"
+	depends on RISCV && RISCV_DMA_NONCOHERENT
+	help
+	  Support for the L2 cache controller on Andes Technology AX45MP platforms.
+
+endmenu
diff --git a/drivers/cache/Makefile b/drivers/cache/Makefile
new file mode 100644
index 000000000000..2012e7fb978d
--- /dev/null
+++ b/drivers/cache/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_AX45MP_L2_CACHE) += ax45mp_cache.o
diff --git a/drivers/cache/ax45mp_cache.c b/drivers/cache/ax45mp_cache.c
new file mode 100644
index 000000000000..cb230b544be8
--- /dev/null
+++ b/drivers/cache/ax45mp_cache.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * non-coherent cache functions for Andes AX45MP
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include <asm/dma-noncoherent.h>
+#include <linux/cacheflush.h>
+#include <linux/cacheinfo.h>
+#include <linux/dma-direction.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+/* L2 cache registers */
+#define AX45MP_L2C_REG_CTL_OFFSET		0x8
+
+#define AX45MP_L2C_REG_C0_CMD_OFFSET		0x40
+#define AX45MP_L2C_REG_C0_ACC_OFFSET		0x48
+#define AX45MP_L2C_REG_STATUS_OFFSET		0x80
+
+/* D-cache operation */
+#define AX45MP_CCTL_L1D_VA_INVAL		0 /* Invalidate an L1 cache entry */
+#define AX45MP_CCTL_L1D_VA_WB			1 /* Write-back an L1 cache entry */
+
+/* L2 CCTL status */
+#define AX45MP_CCTL_L2_STATUS_IDLE		0
+
+/* L2 CCTL status cores mask */
+#define AX45MP_CCTL_L2_STATUS_C0_MASK		0xf
+
+/* L2 cache operation */
+#define AX45MP_CCTL_L2_PA_INVAL			0x8 /* Invalidate an L2 cache entry */
+#define AX45MP_CCTL_L2_PA_WB			0x9 /* Write-back an L2 cache entry */
+
+#define AX45MP_L2C_REG_PER_CORE_OFFSET		0x10
+#define AX45MP_CCTL_L2_STATUS_PER_CORE_OFFSET	4
+
+#define AX45MP_L2C_REG_CN_CMD_OFFSET(n)	\
+	(AX45MP_L2C_REG_C0_CMD_OFFSET + ((n) * AX45MP_L2C_REG_PER_CORE_OFFSET))
+#define AX45MP_L2C_REG_CN_ACC_OFFSET(n)	\
+	(AX45MP_L2C_REG_C0_ACC_OFFSET + ((n) * AX45MP_L2C_REG_PER_CORE_OFFSET))
+#define AX45MP_CCTL_L2_STATUS_CN_MASK(n)	\
+	(AX45MP_CCTL_L2_STATUS_C0_MASK << ((n) * AX45MP_CCTL_L2_STATUS_PER_CORE_OFFSET))
+
+#define AX45MP_CCTL_REG_UCCTLBEGINADDR_NUM	0x80b
+#define AX45MP_CCTL_REG_UCCTLCOMMAND_NUM	0x80c
+
+#define AX45MP_CACHE_LINE_SIZE			64
+
+struct ax45mp_priv {
+	void __iomem *l2c_base;
+	u32 ax45mp_cache_line_size;
+};
+
+static struct ax45mp_priv *ax45mp_priv;
+
+/* L2 Cache operations */
+static inline uint32_t ax45mp_cpu_l2c_get_cctl_status(void)
+{
+	return readl(ax45mp_priv->l2c_base + AX45MP_L2C_REG_STATUS_OFFSET);
+}
+
+static void ax45mp_cpu_cache_operation(unsigned long start, unsigned long end,
+				       unsigned long line_size, unsigned int l1_op,
+				       unsigned int l2_op)
+{
+	void __iomem *base = ax45mp_priv->l2c_base;
+	int mhartid = smp_processor_id();
+	unsigned long pa;
+
+	while (end > start) {
+		csr_write(AX45MP_CCTL_REG_UCCTLBEGINADDR_NUM, start);
+		csr_write(AX45MP_CCTL_REG_UCCTLCOMMAND_NUM, l1_op);
+
+		pa = virt_to_phys((void *)start);
+		writel(pa, base + AX45MP_L2C_REG_CN_ACC_OFFSET(mhartid));
+		writel(l2_op, base + AX45MP_L2C_REG_CN_CMD_OFFSET(mhartid));
+		while ((ax45mp_cpu_l2c_get_cctl_status() &
+			AX45MP_CCTL_L2_STATUS_CN_MASK(mhartid)) !=
+			AX45MP_CCTL_L2_STATUS_IDLE)
+			;
+
+		start += line_size;
+	}
+}
+
+/* Write-back L1 and L2 cache entry */
+static inline void ax45mp_cpu_dcache_wb_range(unsigned long start, unsigned long end,
+					      unsigned long line_size)
+{
+	ax45mp_cpu_cache_operation(start, end, line_size,
+				   AX45MP_CCTL_L1D_VA_WB,
+				   AX45MP_CCTL_L2_PA_WB);
+}
+
+/* Invalidate the L1 and L2 cache entry */
+static inline void ax45mp_cpu_dcache_inval_range(unsigned long start, unsigned long end,
+						 unsigned long line_size)
+{
+	ax45mp_cpu_cache_operation(start, end, line_size,
+				   AX45MP_CCTL_L1D_VA_INVAL,
+				   AX45MP_CCTL_L2_PA_INVAL);
+}
+
+static void ax45mp_cpu_dma_inval_range(unsigned long vaddr, unsigned long size)
+{
+	char cache_buf[2][AX45MP_CACHE_LINE_SIZE];
+	unsigned long start = vaddr;
+	unsigned long end = start + size;
+	unsigned long old_start = start;
+	unsigned long old_end = end;
+	unsigned long line_size;
+	unsigned long flags;
+
+	if (unlikely(start == end))
+		return;
+
+	line_size = ax45mp_priv->ax45mp_cache_line_size;
+
+	memset(&cache_buf, 0x0, sizeof(cache_buf));
+	start = start & (~(line_size - 1));
+	end = ((end + line_size - 1) & (~(line_size - 1)));
+
+	local_irq_save(flags);
+	if (unlikely(start != old_start))
+		memcpy(&cache_buf[0][0], (void *)start, line_size);
+
+	if (unlikely(end != old_end))
+		memcpy(&cache_buf[1][0], (void *)(old_end & (~(line_size - 1))), line_size);
+
+	ax45mp_cpu_dcache_inval_range(start, end, line_size);
+
+	if (unlikely(start != old_start))
+		memcpy((void *)start, &cache_buf[0][0], (old_start & (line_size - 1)));
+
+	local_irq_restore(flags);
+}
+
+static void ax45mp_cpu_dma_wb_range(unsigned long vaddr, unsigned long size)
+{
+	unsigned long start = vaddr;
+	unsigned long end = start + size;
+	unsigned long line_size;
+	unsigned long flags;
+
+	line_size = ax45mp_priv->ax45mp_cache_line_size;
+	local_irq_save(flags);
+	start = start & (~(line_size - 1));
+	ax45mp_cpu_dcache_wb_range(start, end, line_size);
+	local_irq_restore(flags);
+}
+
+static void ax45mp_cpu_dma_flush_range(unsigned long vaddr, unsigned long size)
+{
+	ax45mp_cpu_dma_wb_range(vaddr, size);
+	ax45mp_cpu_dma_inval_range(vaddr, size);
+}
+
+static void ax45mp_get_l2_line_size(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = of_property_read_u32(np, "cache-line-size", &ax45mp_priv->ax45mp_cache_line_size);
+	if (ret) {
+		dev_err(dev, "Failed to get cache-line-size, defaulting to 64 bytes\n");
+		ax45mp_priv->ax45mp_cache_line_size = AX45MP_CACHE_LINE_SIZE;
+	}
+
+	if (ax45mp_priv->ax45mp_cache_line_size != AX45MP_CACHE_LINE_SIZE) {
+		dev_err(dev, "Expected cache-line-size to be 64 bytes (found:%u). Defaulting to 64 bytes\n",
+			ax45mp_priv->ax45mp_cache_line_size);
+		ax45mp_priv->ax45mp_cache_line_size = AX45MP_CACHE_LINE_SIZE;
+	}
+}
+
+static const struct riscv_cache_ops ax45mp_cmo_ops = {
+	.clean_range = &ax45mp_cpu_dma_wb_range,
+	.inv_range = &ax45mp_cpu_dma_inval_range,
+	.flush_range = &ax45mp_cpu_dma_flush_range,
+};
+
+static int ax45mp_l2c_probe(struct platform_device *pdev)
+{
+	/*
+	 * If IOCP is present on the Andes AX45MP core riscv_cbom_block_size
+	 * will be 0 for sure, so we can definitely rely on it. If
+	 * riscv_cbom_block_size = 0 we don't need to handle CMO using SW any
+	 * more so we just return success here and only if its being set we
+	 * continue further in the probe path.
+	 */
+	if (!riscv_cbom_block_size)
+		return 0;
+
+	ax45mp_priv = devm_kzalloc(&pdev->dev, sizeof(*ax45mp_priv), GFP_KERNEL);
+	if (!ax45mp_priv)
+		return -ENOMEM;
+
+	ax45mp_priv->l2c_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ax45mp_priv->l2c_base))
+		return PTR_ERR(ax45mp_priv->l2c_base);
+
+	ax45mp_get_l2_line_size(pdev);
+
+	riscv_noncoherent_register_cache_ops(&ax45mp_cmo_ops);
+
+	return 0;
+}
+
+static const struct of_device_id ax45mp_cache_ids[] = {
+	{ .compatible = "andestech,ax45mp-cache" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver ax45mp_l2c_driver = {
+	.driver = {
+		.name = "ax45mp-l2c",
+		.of_match_table = ax45mp_cache_ids,
+	},
+	.probe = ax45mp_l2c_probe,
+};
+
+static int __init ax45mp_cache_init(void)
+{
+	return platform_driver_register(&ax45mp_l2c_driver);
+}
+arch_initcall(ax45mp_cache_init);
-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux