Linux PCI

• Thread Index

• [PATCH 14/24] PCI: keystone: Add support for PCIe RC in AM654x Platforms
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 15/24] PCI: keystone: Invoke phy_reset API before enabling PHY
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 09/24] dt-bindings: PCI: Document "atu" reg-names
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 07/24] dt-bindings: PCI: Add dt-binding to configure PCIe mode
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 05/24] PCI: keystone: Use platform_get_resource_byname to get memory resources
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 04/24] PCI: keystone: Perform host initialization in a single function
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 02/24] PCI: keystone: Cleanup error_irq configuration
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 03/24] dt-bindings: PCI: keystone: Add "reg-names" binding information
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 01/24] PCI: keystone: Add start_link/stop_link dw_pcie_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 00/24] Add support for PCIe RC and EP mode in TI's AM654 SoC
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [RFC v3 7/7] dmaengine: Add Synopsys eDMA IP test and sample driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [RFC v3 5/7] dmaengine: Add Synopsys eDMA IP PCIe glue-logic
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [PATCH v2 11/15] PCI: pci-epf-test: Use pci_epc_get_features to get EPC features
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 12/15] PCI: cadence: Remove pci_epf_linkup from Cadence EP driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 13/15] PCI: rockchip: Remove pci_epf_linkup from Rockchip EP driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 15/15] PCI: endpoint: Remove features member in struct pci_epc
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 14/15] PCI: designware-plat: Remove setting epc->features in Designware plat EP driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 09/15] PCI: pci-epf-test: Remove setting epf_bar flags in function driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 06/15] PCI: cadence: Populate ->get_features() cdns_pcie_epc_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 10/15] PCI: pci-epf-test: Do not allocate next BARs memory if current BAR is 64Bit
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 08/15] PCI: endpoint: Fix pci_epf_alloc_space to set correct MEM TYPE flags
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 07/15] PCI: endpoint: Add helper to get first unreserved BAR
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 05/15] PCI: rockchip: Populate ->get_features() dw_pcie_ep_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 00/15] PCI: endpoint: Cleanup EPC features
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 01/15] PCI: endpoint: Add new pci_epc_ops to get EPC features
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 03/15] PCI: designware-plat: Populate ->get_features() dw_pcie_ep_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 04/15] PCI: pci-dra7xx: Populate ->get_features() dw_pcie_ep_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 02/15] PCI: dwc: Add ->get_features() callback function in dw_pcie_ep_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Kconfig label updates
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH] Revert "PCI: armada8k: Add support for gpio controlled reset signal"
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH v5 4/4] PCI: imx6: Add support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v5 3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v5 2/4] PCI: imx6: Mark PHY functions as i.MX6 specific
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v5 1/4] PCI: imx6: introduce drvdata
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v5 0/4] PCIE support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v4 4/4] PCI: imx6: Add support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [RFC v3 5/7] dmaengine: Add Synopsys eDMA IP PCIe glue-logic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] PCI: imx6: Add support for i.MX8MQ
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC v3 7/7] dmaengine: Add Synopsys eDMA IP test and sample driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [RFC v3 2/7] dmaengine: Add Synopsys eDMA IP version 0 support
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v3 3/7] dmaengine: Add Synopsys eDMA IP version 0 debugfs support
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v3 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v3 5/7] dmaengine: Add Synopsys eDMA IP PCIe glue-logic
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v3 7/7] dmaengine: Add Synopsys eDMA IP test and sample driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v3 1/7] dmaengine: Add Synopsys eDMA IP core driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v3 6/7] MAINTAINERS: Add Synopsys eDMA IP driver maintainer
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v3 4/7] PCI: Add Synopsys endpoint EDDA Device id
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [GIT PULL] ACPI fixes for v5.0-rc2
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH RFC 1/4] PCI: hotplug: Add parameter to put devices to reset during rescan
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• Re: [GIT PULL] PCI fixes for v5.0
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH RFC v2 02/21] PCI: Define PCI-specific version of the release_child_resources()
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 21/21] x86: enable movable BARs
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 19/21] powerpc/pci: Fix crash with enabled movable BARs
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 00/21] PCI: Allow BAR movement during hotplug
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 06/21] PCI: Don't allow hotplugged devices to steal resources
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 11/21] PCI: Calculate fixed areas of bridge windows based on fixed BARs
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 17/21] PCI: pciehp: Add support for the movable BARs feature
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 13/21] PCI: Make sure bridge windows include their fixed BARs
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 05/21] PCI: Release and reassign the root bridge resources during rescan
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 09/21] PCI: Don't reserve memory for hotplug when enabled movable BARs
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 18/21] nvme-pci: Handle movable BARs
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 07/21] PCI: Mark immovable BARs with PCI_FIXED
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 01/21] PCI: Fix writing invalid BARs during pci_restore_state()
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 20/21] PCI: Wake up bridges during rescan when movable BARs enabled
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 15/21] PCI: Fix race condition in pci_enable/disable_device()
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 03/21] PCI: hotplug: Add a flag for the movable BARs feature
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 16/21] PCI: Enable bridge's I/O and MEM access for hotplugged devices
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 14/21] PCI: Prioritize fixed BAR assigning over the movable ones
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 04/21] PCI: Pause the devices with movable BARs during rescan
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 10/21] PCI: Allow the failed resources to be reassigned later
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 12/21] PCI: Calculate boundaries for bridge windows
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• [PATCH RFC v2 08/21] PCI: Include fixed BARs into the bus size calculating
  • From: Sergey Miroshnichenko <s.miroshnichenko@xxxxxxxxx>
• Re: [PATCHv4 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 0/7] Add virtio-iommu driver
  • From: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
• Re: [PATCH v6 0/7] Add virtio-iommu driver
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: Kconfig label updates
  • From: Segher Boessenkool <segher@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] ACPI fixes for v5.0-rc2
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCHv3 2/5] arm64: dts: layerscape: add num-viewport property for PCIe DT nodes
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCHv3 1/5] ARM: dts: ls1021a: add num-viewport property for PCIe DT nodes
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: Kconfig label updates
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add Stratix 10 PCIe Root Port support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [RFC] PCI / ACPI: Implementing Type 3 _HPX records
  • From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
• [GIT PULL] PCI fixes for v5.0
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: Kconfig label updates
  • From: Tyrel Datwyler <tyreld@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH 1/2] gpio: mvebu: implement get_direction
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [Bug report] PCIe NVME SSD hotplug surprise removal issue
  • From: Dongdong Liu <liudongdong3@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 2/2] PCI: armada8k: don't toggle reset twice
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH 1/2] gpio: mvebu: implement get_direction
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH 00/15] PCI: endpoint: Cleanup EPC features
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [Bug report] PCIe NVME SSD hotplug surprise removal issue
  • From: Dongdong Liu <liudongdong3@xxxxxxxxxx>
• Re: [PATCH 00/15] PCI: endpoint: Cleanup EPC features
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: Kconfig label updates
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: Kconfig label updates
  • From: Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: Regression with commit PCI: mvebu: Convert to PCI emulated bridge config space
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: Kconfig label updates
  • From: Oliver <oohall@xxxxxxxxx>
• Kconfig label updates
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v3 01/15] PCI: aardvark: Enlarge PIO timeout
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 02/15] PCI: aardvark: Configure more registers in the configuration helper
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 04/15] PCI: aardvark: Add PHY support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 03/15] PCI: aardvark: Add clock support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 09/15] dt-bindings: PCI: aardvark: Describe the PHY property
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 07/15] PCI: aardvark: Add suspend to RAM support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 08/15] dt-bindings: PCI: aardvark: Describe the clocks property
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 10/15] dt-bindings: PCI: aardvark: Describe the PCIe endpoint card reset pins
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 06/15] PCI: aardvark: Add external reset GPIO support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 05/15] PCI: aardvark: Add PCIe warm reset support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 12/15] ARM64: dts: marvell: armada-37xx: declare PCIe clock
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 11/15] dt-bindings: PCI: aardvark: Describe the reset-gpios property
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 13/15] ARM64: dts: marvell: armada-3720-espressobin: declare PCIe PHY
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 14/15] ARM64: dts: marvell: armada-37xx: declare PCIe reset pin
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 15/15] ARM64: dts: marvell: armada-3720-espressobin: declare PCIe warm reset pin
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v3 00/15] Bring suspend to RAM support to PCIe Aardvark driver
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] drm: Require PCI for selecting VGA_ARB.
  • From: Sinan Kaya <Okaya@xxxxxxxxxx>
• Re: [PATCH] drm: Require PCI for selecting VGA_ARB.
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH] PCI: amlogic: Fix build failure due to missing gpio header
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH V2] PCI: dwc ep: cache config until DBI regs available
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set
  • From: Peter Wu <peter@xxxxxxxxxxxxx>
• Re: Regression with commit PCI: mvebu: Convert to PCI emulated bridge config space
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Re: [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] PCI: imx6: Add support for i.MX8MQ
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm: cns3xxx: use actual size reads for PCIe
  • From: khalasa@xxxxxxx (Krzysztof Hałasa)
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• [PATCHv4 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode
  • From: Xiaowei Bao <xiaowei.bao@xxxxxxx>
• [PATCHv4 2/4] arm64: dts: Add the PCIE EP node in dts
  • From: Xiaowei Bao <xiaowei.bao@xxxxxxx>
• [PATCHv4 3/4] pci: layerscape: Add the EP mode support.
  • From: Xiaowei Bao <xiaowei.bao@xxxxxxx>
• [PATCHv4 4/4] misc: pci_endpoint_test: Add the layerscape EP device support
  • From: Xiaowei Bao <xiaowei.bao@xxxxxxx>
• Re: [PATCH] PCI: quirks: add vendor ID for AR9462 card
  • From: James Prestwood <james.prestwood@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI: pciehp: Disable Data Link Layer State Changed event on suspend
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] Revert "PCI/PME: Implement runtime PM callbacks"
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] PCI: quirks: add vendor ID for AR9462 card
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC v2 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• [PATCH] PCI: quirks: add vendor ID for AR9462 card
  • From: James Prestwood <james.prestwood@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] PCI: Fix runtime PME generation from D3hot
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] PCI: dwc: fix MSI IRQ handler ordering
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [PATCH] PCI: amlogic: Fix build failure due to missing gpio header
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH] PCI: dwc: fix MSI IRQ handler ordering
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: avoid bridge feature re-probing on hotplug
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• [PATCH 2/2] PCI: pciehp: Disable Data Link Layer State Changed event on suspend
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 0/2] PCI: Fix runtime PME generation from D3hot
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/2] Revert "PCI/PME: Implement runtime PM callbacks"
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/15] PCI: endpoint: Cleanup EPC features
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 2/2] arm: cns3xxx: use actual size reads for PCIe
  • From: Koen Vandeputte <koen.vandeputte@xxxxxxxxxxxx>
• [PATCH v2 1/2] arm: cns3xxx: fix writing to wrong PCI registers after alignment
  • From: Koen Vandeputte <koen.vandeputte@xxxxxxxxxxxx>
• Re: [PATCH] arm: cns3xxx: fix writing to wrong PCI registers after alignment
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH RESEND] PCI: pciehp: Assign ctrl->slot_ctrl before writing it to hardware
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: dwc: fix MSI IRQ handler ordering
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH] arm: cns3xxx: fix writing to wrong PCI registers after alignment
  • From: Koen Vandeputte <koen.vandeputte@xxxxxxxxxxxx>
• [PATCH 07/15] PCI: endpoint: Add helper to get first unreserved BAR
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 05/15] PCI: rockchip: Populate ->get_features() dw_pcie_ep_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 08/15] PCI: endpoint: Fix pci_epf_alloc_space to set correct MEM TYPE flags
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 12/15] PCI: cadence: Remove pci_epf_linkup from Cadence EP driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 10/15] PCI: pci-epf-test: Do not allocate next BARs memory if current BAR is 64Bit
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 13/15] PCI: rockchip: Remove pci_epf_linkup from Rockchip EP driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 14/15] PCI: designware-plat: Remove setting epc->features in Designware plat EP driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 15/15] PCI: endpoint: Remove features member in struct pci_epc
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 06/15] PCI: cadence: Populate ->get_features() cdns_pcie_epc_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 11/15] PCI: pci-epf-test: Use pci_epc_get_features to get EPC features
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 09/15] PCI: pci-epf-test: Remove setting epf_bar flags in function driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 02/15] PCI: dwc: Add ->get_features() callback function in dw_pcie_ep_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 04/15] PCI: pci-dra7xx: Populate ->get_features() dw_pcie_ep_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 03/15] PCI: designware-plat: Populate ->get_features() dw_pcie_ep_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 01/15] PCI: endpoint: Add new pci_epc_ops to get EPC features
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 00/15] PCI: endpoint: Cleanup EPC features
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCHv2 2/4] nvme-pci: Distribute io queue types after creation
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [GIT PULL] PCI changes for v4.21
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [REGRESSION, BISECTED] pci: nvme device with HMB fails on arm64
  • From: Liviu Dudau <liviu@xxxxxxxxxxx>
• Re: [PATCH] PCI: dwc: fix MSI IRQ handler ordering
  • From: Trent Piepho <tpiepho@xxxxxxxxxx>
• Re: [PATCH] PCI: dwc: fix MSI IRQ handler ordering
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] PCI: dwc: fix MSI IRQ handler ordering
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCHv2 3/4] PCI/MSI: Handle vector reduce and retry
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH] PCI: dwc: fix MSI IRQ handler ordering
  • From: Trent Piepho <tpiepho@xxxxxxxxxx>
• Re: [PATCHv2 3/4] PCI/MSI: Handle vector reduce and retry
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH] PCI: dwc: fix MSI IRQ handler ordering
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 07/21] PCI: designware: Make use of IS_ALIGNED()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 07/21] PCI: designware: Make use of IS_ALIGNED()
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCHv2 2/4] nvme-pci: Distribute io queue types after creation
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCHv2 4/4] nvme-pci: Use PCI to handle IRQ reduce and retry
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH 1/4] nvme-pci: Set tagset nr_maps just once
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCHv2 4/4] nvme-pci: Use PCI to handle IRQ reduce and retry
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCHv2 2/4] nvme-pci: Distribute io queue types after creation
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 1/4] nvme-pci: Set tagset nr_maps just once
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v2 02/20] PCI: imx6: Remove redundant debug tracing
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 01/20] PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 03/20] PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 05/20] PCI: imx6: Remove PCIE_PL_PFLR_* constants
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 07/20] PCI: dwc: Make use of IS_ALIGNED()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 09/20] PCI: dwc: imx6: Share PHY debug register definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 06/20] PCI: imx6: Remove PCIE_PHY_RX_ASIC_OUT* constants
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 04/20] PCI: imx6: Remove duplicate macro definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 10/20] PCI: dwc: Make use of BIT() in constant definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 12/20] PCI: imx6: Simplify bit operations in PHY functions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 13/20] PCI: imx6: Simplify pcie_phy_poll_ack()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 15/20] PCI: imx6: Pass data to dw_pcie_writel_dbi() directly
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 11/20] PCI: imx6: Make use of BIT() in constant definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 16/20] PCI: imx6: Use common mask in imx6_pcie_reset_phy()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 17/20] PCI: imx6: Simplify bit operations in imx6_setup_phy_mpll()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 20/20] PCI: dwc: Remove superfluous shifting in definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 19/20] PCI: dwc: Make use of GENMASK/FIELD_PREP
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 18/20] PCI: imx6: Remove magic numbers from imx6_pcie_establish_link()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 14/20] PCI: imx6: Restrict PHY register data to 16-bit
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 08/20] PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 00/20] i.MX6, DesignWare PCI improvements
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [REGRESSION, BISECTED] pci: nvme device with HMB fails on arm64
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v4 1/4] PCI: imx6: introduce drvdata
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 2/4] PCI: imx6: Mark PHY functions as i.MX6 specific
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 3/4] PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 4/4] PCI: imx6: Add support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v4 0/4] PCIE support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCHv2 2/4] nvme-pci: Distribute io queue types after creation
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• [REGRESSION, BISECTED] pci: nvme device with HMB fails on arm64
  • From: Liviu Dudau <liviu@xxxxxxxxxxx>
• Re: [PATCH] PCI: amlogic: fix build failure due to missing linux/gpio/consumer.h header
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH] PCI: amlogic: fix build failure due to missing linux/gpio/consumer.h header
  • From: LABBE Corentin <clabbe@xxxxxxxxxxxx>
• Re: [PATCH] PCI: amlogic: fix build failure due to missing linux/gpio/consumer.h header
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• [PATCH] PCI: amlogic: fix build failure due to missing linux/gpio/consumer.h header
  • From: Corentin Labbe <clabbe@xxxxxxxxxxxx>
• Re: [PATCH 02/15] swiotlb: remove dma_mark_clean
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH V2] PCI: dwc ep: cache config until DBI regs available
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCHv2 2/4] nvme-pci: Distribute io queue types after creation
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH] PCI: Add no-D3 quirk for Mellanox ConnectX-[45]
  • From: David Gibson <david@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 3/4] PCI/MSI: Handle vector reduce and retry
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCHv2 4/4] nvme-pci: Use PCI to handle IRQ reduce and retry
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCHv2 2/4] nvme-pci: Distribute io queue types after creation
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCHv2 1/4] nvme-pci: Set tagset nr_maps just once
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCHv2 4/4] nvme-pci: Use PCI to handle IRQ reduce and retry
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• [PATCHv2 3/4] PCI/MSI: Handle vector reduce and retry
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• [PATCHv2 2/4] nvme-pci: Distribute io queue types after creation
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• [PATCHv2 1/4] nvme-pci: Set tagset nr_maps just once
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• [PATCHv2 0/4] NVMe IRQ sets fixups
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH 3/4] pci/irq: Handle vector reduce and retry
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH 3/4] pci/irq: Handle vector reduce and retry
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 4/4] nvme-pci: Use PCI to handle IRQ reduce and retry
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• [PATCH 3/4] pci/irq: Handle vector reduce and retry
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• [PATCH 2/4] nvme-pci: Distribute io queue types after creation
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• [PATCH 1/4] nvme-pci: Set tagset nr_maps just once
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH 1/6] PCI: iproc: Update iProc PCI binding for INTx support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [RFC 4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [RFC 4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/15] swiotlb: remove dma_mark_clean
  • From: Tony Luck <tony.luck@xxxxxxxxx>
• Re: [RFC PATCH 2/2] PCI/portdrv Hisilicon PCIe transport layer Port PMU driver.
  • From: Will Deacon <will.deacon@xxxxxxx>
• [GIT PULL] PCI changes for v4.21
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 02/15] swiotlb: remove dma_mark_clean
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH -next] PCI: amlogic: Use PTR_ERR_OR_ZERO
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH 02/15] swiotlb: remove dma_mark_clean
  • From: Tony Luck <tony.luck@xxxxxxxxx>
• Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH] lspci: Fix extra newline if L1.2 is not supported.
  • From: Vinson Lee <vlee@xxxxxxxxxxxxxxx>
• Re: [PATCH 11/21] PCI: designware: Make use of BIT() in constant definitions
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 11/21] PCI: designware: Make use of BIT() in constant definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH V2] PCI: dwc ep: cache config until DBI regs available
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 08/21] PCI: designware: Share code for dw_pcie_rd/wr_other_conf()
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 10/10] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 09/10] PCI: dwc: Remove Keystone specific dw_pcie_host_ops
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 07/10] PCI: dwc: Add support to use non default msi_irq_chip
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 07/21] PCI: designware: Make use of IS_ALIGNED()
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH v3 1/2] PCI: altera: Add Stratix 10 PCIe support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH v3 0/2] Add Stratix 10 PCIe Root Port support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH] PCI: Mediatek: Use resource_size function on resource object
  • From: <honghui.zhang@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] pci: altera: Add Stratix10 PCIe support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• Re: [PATCH v2 1/2] pci: altera: Add Stratix10 PCIe support
  • From: "Tan, Ley Foon" <ley.foon.tan@xxxxxxxxx>
• Re: [PATCH v2 0/2] Add Stratix10 PCIe Root Port support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• Re: [v6] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/2] PCI/IOV: provide flag to skip VF scanning
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: How to force RC to forward p2p TLPs
  • From: "Stephen Bates" <sbates@xxxxxxxxxxxx>
• RE: How to force RC to forward p2p TLPs
  • From: Eric Wehage <Eric.Wehage@xxxxxxxxxx>
• Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/2] nvme pci: try to allocate multiple irq vectors again in case of -EINVAL
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] pci: dwc: add a check for resetting gpio
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add Stratix10 PCIe Root Port support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• RFC: Breaking changes around pci.ids
  • From: Martin Mareš <mj@xxxxxx>
• Re: [PATCH] arm: cns3xxx: fix writing to wrong PCI registers after alignment
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pci: altera: Add Stratix10 PCIe support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH RFC] PCI/PME: fix PME runtime PM handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH RFC] PCI/PME: fix PME runtime PM handling
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC] PCI/PME: fix PME runtime PM handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] arm: cns3xxx: fix writing to wrong PCI registers after alignment
  • From: khalasa@xxxxxxx (Krzysztof Hałasa)
• Re: [PATCH RFC] PCI/PME: fix PME runtime PM handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH RFC] PCI/PME: fix PME runtime PM handling
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] Documentation: dt-bindings: pci: altera: Add altr,pcie-root-port-2.0
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH v2 1/2] pci: altera: Add Stratix10 PCIe support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH v2 0/2] Add Stratix10 PCIe Root Port support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• Re: [PATCH 1/2] pci: altera: Add StratixXX PCIe support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH RFC] PCI/PME: fix PME runtime PM handling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] arm: cns3xxx: fix writing to wrong PCI registers after alignment
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: How to force RC to forward p2p TLPs
  • From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
• [PATCH V2 1/3] PCI/MSI: preference to returning -ENOSPC from pci_alloc_irq_vectors_affinity
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• [PATCH V2 0/3] nvme pci: two fixes on nvme_setup_irqs
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH 1/2] pci: altera: Add StratixXX PCIe support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: How to force RC to forward p2p TLPs
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 0/3] irq/core: Fix and expand the irq affinity descriptor
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• Re: [PATCH 2/2] nvme pci: try to allocate multiple irq vectors again in case of -EINVAL
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [PATCH v2] PCI: pciehp: Report degraded links via link bandwidth notification
  • From: "Alex G." <mr.nuke.me@xxxxxxxxx>
• Re: [PATCH v2] PCI/MSI: Don't touch MSI bits when the PCI device is disconnected
  • From: <Alex_Gagniuc@xxxxxxxxxxxx>
• Re: [PATCH 2/2] nvme pci: try to allocate multiple irq vectors again in case of -EINVAL
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 2/2] nvme pci: try to allocate multiple irq vectors again in case of -EINVAL
  • From: Ming Lei <ming.lei@xxxxxxxxxx>
• Re: [v6] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Trent Piepho <tpiepho@xxxxxxxxxx>
• Re: [PATCH 00/21] i.MX6, DesignWare PCI improvements
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 11/21] PCI: designware: Make use of BIT() in constant definitions
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 20/21] PCI: designware: Make use of GENMASK/FIELD_PREP
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 21/21] PCI: designware: Remove superfluous shifting in definitions
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [PATCH 2/2] Documentation: dt-bindings: pci: altera: Add altr,pcie-root-port-2.0
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH 1/2] pci: altera: Add StratixXX PCIe support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH 0/2] Add StratixXX PCIe Rootport support
  • From: Ley Foon Tan <ley.foon.tan@xxxxxxxxx>
• [PATCH] pci: dwc: add a check for resetting gpio
  • From: Kangjie Lu <kjlu@xxxxxxx>
• Re: [GIT PULL] ACPI updates for v4.21-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v1 06/11] platform/x86: apple-gmux: hide PCI specific code
  • From: Sinan Kaya <Okaya@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
• Re: [PATCH v2 03/11] vga-switcheroo: make PCI dependency explicit
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v2 03/11] vga-switcheroo: make PCI dependency explicit
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• Re: [PATCH v2 03/11] vga-switcheroo: make PCI dependency explicit
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 03/11] vga-switcheroo: make PCI dependency explicit
  • From: Sinan Kaya <Okaya@xxxxxxxxxx>
• How to force RC to forward p2p TLPs
  • From: yu <kkndyu@xxxxxxxxx>
• Re: [PATCH v1 06/11] platform/x86: apple-gmux: hide PCI specific code
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• Re: [PATCH v1 06/11] platform/x86: apple-gmux: hide PCI specific code
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v1 03/11] vga-switcheroo: make PCI dependency explicit
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 03/11] vga-switcheroo: make PCI dependency explicit
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 09/21] PCI: imx6: Drop imx6_pcie_link_up()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 09/21] PCI: imx6: Drop imx6_pcie_link_up()
  • From: Trent Piepho <tpiepho@xxxxxxxxxx>
• Re: [PATCH 1/2] PCI/IOV: provide flag to skip VF scanning
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• [PATCH 3/3] s390/pci: skip VF scanning
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• [PATCH 2/3] PCI/IOV: provide flag to skip VF scanning
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• [PATCH 1/3] PCI/IOV: factor out sriov_add_vfs
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
• [GIT PULL] ACPI updates for v4.21-rc1
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 03/21] PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/21] PCI: imx6: Remove PCIE_PL_PFLR_* constants
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 01/21] PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 02/21] PCI: imx6: Remove redundant debug tracing
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 07/21] PCI: designware: Make use of IS_ALIGNED()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 09/21] PCI: imx6: Drop imx6_pcie_link_up()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 08/21] PCI: designware: Share code for dw_pcie_rd/wr_other_conf()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 06/21] PCI: imx6: Remove PCIE_PHY_RX_ASIC_OUT* constants
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 04/21] PCI: imx6: Remove duplicate macro definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 13/21] PCI: imx6: Simplify bit operations in PHY functions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 12/21] PCI: imx6: Make use of BIT() in constant definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 11/21] PCI: designware: Make use of BIT() in constant definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 15/21] PCI: imx6: Restrict PHY register data to 16-bit
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 14/21] PCI: imx6: Simplify pcie_phy_poll_ack()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 17/21] PCI: imx6: Use common mask in imx6_pcie_reset_phy()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 18/21] PCI: imx6: Simplify bit operations in imx6_setup_phy_mpll()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 16/21] PCI: imx6: Pass data to dw_pcie_writel_dbi() directly
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 19/21] PCI: imx6: Remove magic numbers from imx6_pcie_establish_link()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 20/21] PCI: designware: Make use of GENMASK/FIELD_PREP
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 21/21] PCI: designware: Remove superfluous shifting in definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 10/21] PCI: designware: imx6: Share PHY debug register definitions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 00/21] i.MX6, DesignWare PCI improvements
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [v6] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• RE: [v5] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [PATCH v2] PCI: avoid bridge feature re-probing on hotplug
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v2] PCI: avoid bridge feature re-probing on hotplug
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2] PCI: avoid bridge feature re-probing on hotplug
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH 1/2] PCI/IOV: provide flag to skip VF scanning
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH V2] x86: Fix an issue with invalid ACPI NUMA config
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2] PCI: avoid bridge feature re-probing on hotplug
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v6 0/7] Add virtio-iommu driver
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v6 0/7] Add virtio-iommu driver
  • From: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
• Re: [PATCH V2] x86: Fix an issue with invalid ACPI NUMA config
  • From: Dave Hansen <dave.hansen@xxxxxxxxx>
• Re: [PATCH 15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH V2] x86: Fix an issue with invalid ACPI NUMA config
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/2] ACPI / scan: Refactor _CCA enforcement
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [v5] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Leonard Crestez <leonard.crestez@xxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: PCI: rcar: Add device tree support for r8a774c0
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• RE: [v4] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• RE: [v4] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Trent Piepho <tpiepho@xxxxxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v6 0/7] Add virtio-iommu driver
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• [PATCH v12 4/7] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: PCI: Add support for MT7629
  • From: Rob Herring <robh@xxxxxxxxxx>
• [REGRESSION] Deadlock in nvme drive removal (Was: Problems with commit "cb4bfda62afa nvme-pci: fix hot removal during error handling")
  • From: <Alex_Gagniuc@xxxxxxxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [v4] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v5 0/2] Add new UniPhier PCIe host driver
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [v5] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH V2] PCI: dwc ep: cache config until DBI regs available
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC BUG] pci: Freescale i.MX6 PCIe controller: revert mainline regression
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• Re: [v4] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] irq/core: Fix and expand the irq affinity descriptor
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH 04/10] PCI: keystone: Add separate functions for configuring MSI and legacy interrupt
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 05/10] PCI: keystone: Use hwirq to get the IRQ number offset
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 07/10] PCI: dwc: Add support to use non default msi_irq_chip
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 01/10] PCI: keystone: Cleanup interrupt related macros
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 10/10] PCI: dwc: Do not write to MSI control registers if the platform doesn't use it
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 06/10] PCI: keystone: Cleanup ks_pcie_msi_irq_handler and ks_pcie_legacy_irq_handler
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 09/10] PCI: dwc: Remove Keystone specific dw_pcie_host_ops
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 08/10] PCI: keystone: Use Keystone specific msi_irq_chip
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 03/10] PCI: keystone: Modify legacy_irq_handler to check the IRQ_STATUS of INTA/B/C/D
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 00/10] PCI: DWC/Keystone: MSI configuration cleanup
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 02/10] PCI: keystone: Use "dummy_irq_chip" instead of new irqchip for legacy interrupt handling
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v8 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• Re: [PATCH 0/3] irq/core: Fix and expand the irq affinity descriptor
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• RE: [PATCHv3 4/4] misc: pci_endpoint_test: Add the layerscape EP device support
  • From: Xiaowei Bao <xiaowei.bao@xxxxxxx>
• Re: [PATCHv3 4/4] misc: pci_endpoint_test: Add the layerscape EP device support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC v4.14] PCI: aadrvark: warm reset the cores and card
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 2/2] s390/pci: skip VF scanning
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] PCI/IOV: provide flag to skip VF scanning
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Christoph Hellwig <hch@xxxxxx>
• [v5] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [GIT PULL] PCI fixes for v4.20
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v8 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: Regression with commit PCI: mvebu: Convert to PCI emulated bridge config space
  • From: Luís Mendes <luis.p.mendes@xxxxxxxxx>
• Re: [RFC BUG] pci: Freescale i.MX6 PCIe controller: revert mainline regression
  • From: Trent Piepho <tpiepho@xxxxxxxxxx>
• Re: [PATCH v8 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Problems with commit "cb4bfda62afa nvme-pci: fix hot removal during error handling"
  • From: <Alex_Gagniuc@xxxxxxxxxxxx>
• [GIT PULL] PCI fixes for v4.20
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RFC BUG] pci: Freescale i.MX6 PCIe controller: revert mainline regression
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: Regression with commit PCI: mvebu: Convert to PCI emulated bridge config space
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Re: [15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
• Re: [v4] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Leonard Crestez <leonard.crestez@xxxxxxx>
• Re: [PATCH v2] dt-bindings: PCI: rcar: Add device tree support for r8a774c0
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Regression with commit PCI: mvebu: Convert to PCI emulated bridge config space
  • From: Luís Mendes <luis.p.mendes@xxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH 2/3] irq/affinity: Add is_managed into struct irq_affinity_desc
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Regression with commit PCI: mvebu: Convert to PCI emulated bridge config space
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Re: [PATCH 05/12] PCI: aardvark: add suspend to RAM support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 0/4] Cleanup un-used variant and un-used property for MediaTek PCIe
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: Regression with commit PCI: mvebu: Convert to PCI emulated bridge config space
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Fwd: Regression with commit PCI: mvebu: Convert to PCI emulated bridge config space
  • From: Luís Mendes <luis.p.mendes@xxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Marek Behun <marek.behun@xxxxxx>
• [PATCH v2] dt-bindings: PCI: rcar: Add device tree support for r8a774c0
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH] PCI: imx: Fix an IS_ERR() vs NULL bug
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] PCI: imx: Fix an IS_ERR() vs NULL bug
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH] PCI: imx: Fix an IS_ERR() vs NULL bug
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH 05/12] PCI: aardvark: add suspend to RAM support
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFC v2 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] PCI/portdrv Hisilicon PCIe transport layer Port PMU driver.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH 1/2] PCI/IOV: provide flag to skip VF scanning
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• [PATCH 2/2] s390/pci: skip VF scanning
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Leonard Crestez <leonard.crestez@xxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: imx: Fix an IS_ERR() vs NULL bug
  • From: Leonard Crestez <leonard.crestez@xxxxxxx>
• [PATCH] PCI: imx: Fix an IS_ERR() vs NULL bug
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v8 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v8 0/2 RESEND] add the Amlogic Meson PCIe controller driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v8 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCH v7 0/2] add the Amlogic Meson PCIe controller driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• [PATCHv3 4/5] PCI: dwc: fix 4GiB outbound window size truncated to zero issue
  • From: "Z.q. Hou" <zhiqiang.hou@xxxxxxx>
• [PATCHv3 5/5] PCI: dwc: add prefetchable memory range support
  • From: "Z.q. Hou" <zhiqiang.hou@xxxxxxx>
• [PATCHv3 2/5] arm64: dts: layerscape: add num-viewport property for PCIe DT nodes
  • From: "Z.q. Hou" <zhiqiang.hou@xxxxxxx>
• [PATCHv3 3/5] PCI: dwc: fix potential memory leak
  • From: "Z.q. Hou" <zhiqiang.hou@xxxxxxx>
• [PATCHv3 1/5] ARM: dts: ls1021a: add num-viewport property for PCIe DT nodes
  • From: "Z.q. Hou" <zhiqiang.hou@xxxxxxx>
• [PATCHv3 0/5] PCI: dwc: add prefetchable memory range support
  • From: "Z.q. Hou" <zhiqiang.hou@xxxxxxx>
• [PATCH v3 1/3] PCI: imx6: introduce drvdata
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 2/3] PCI: imx6: Mark PHY functions as i.MX6 specific
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 0/3] PCIE support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v11 3/7] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• Re: [PATCH v10 3/6] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Sinan Kaya <Okaya@xxxxxxxxxx>
• Re: [PATCH v1 1/2] PCI: Stub out read/write/raw/find functions
  • From: Sinan Kaya <Okaya@xxxxxxxxxx>
• [PATCH v2] PCI: avoid bridge feature re-probing on hotplug
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v2 2/2] PCI: Override Synopsys USB 3.x HAPS device class
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC v2 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
  • From: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH] PCI/ASPM: Remove unused lists from struct pcie_link_state
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v1 2/2] PCI/ACPI: alloc ACPI to be built without PCI support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v1 1/2] PCI: Stub out read/write/raw/find functions
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] PCI/portdrv Hisilicon PCIe transport layer Port PMU driver.
  • From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] PCI/portdrv Hisilicon PCIe transport layer Port PMU driver.
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 3/3] PCI: imx6: Make fallthrough comments more consistent
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 2/2] s390/pci: handle function enumeration after sriov enablement
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] s390/pci: handle function enumeration after sriov enablement
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• [RFC v2 2/6] dmaengine: Add Synopsys eDMA IP version 0 support
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v2 6/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v2 1/6] dmaengine: Add Synopsys eDMA IP core driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v2 5/6] dmaengine: Add Synopsys eDMA IP PCIe glue-logic
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v2 3/6] dmaengine: Add Synopsys eDMA IP version 0 debugfs support
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v2 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• [RFC v2 4/6] PCI: Add Synopsys endpoint EDDA Device id
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 0/3] Fixes for "PCIE support for i.MX8MQ"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 2/3] PCI: imx6: Invert checks in imx6_pcie_reset_phy() and imx6_setup_phy_mpll()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v10 3/6] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH 05/12] PCI: aardvark: add suspend to RAM support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 10/12] ARM64: dts: marvell: armada-3720-espressobin: declare PCIe reset GPIO
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 3/3] PCI: imx6: Make fallthrough comments more consistent
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 0/3] PCIE support for i.MX8MQ
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [RFC PATCH 2/2] PCI/portdrv Hisilicon PCIe transport layer Port PMU driver.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 0/3] Fixes for "PCIE support for i.MX8MQ"
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2 0/3] PCIE support for i.MX8MQ
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH 2/3] PCI: imx6: Invert checks in imx6_pcie_reset_phy() and imx6_setup_phy_mpll()
  • From: Leonard Crestez <leonard.crestez@xxxxxxx>
• Re: [PATCH v2 0/3] PCIE support for i.MX8MQ
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 1/3] PCI: imx6: Fixup Kconfig and #endif placement
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/3] PCI: imx6: Invert checks in imx6_pcie_reset_phy() and imx6_setup_phy_mpll()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/3] PCI: imx6: Make fallthrough comments more consistent
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/3] Fixes for "PCIE support for i.MX8MQ"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] pci: avoid bridge feature re-probing on hotplug
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] PCI: Remove unused attr variable in pci_dma_configure
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 0/3] PCIE support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v2 3/3] PCI: imx: Add support for i.MX8MQ
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] PCI: Remove unused attr variable in pci_dma_configure
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH v10 3/6] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] PCI/portdrv Hisilicon PCIe transport layer Port PMU driver.
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v9 6/6] PCI: Stub out pci_request_acs() when CONFIG_PCI is not set
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v9 6/6] PCI: Stub out pci_request_acs() when CONFIG_PCI is not set
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 3/3] PCI: imx: Add support for i.MX8MQ
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH v9 3/6] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 14/15] vmd: use the proper dma_* APIs instead of direct methods calls
  • From: "Derrick, Jonathan" <jonathan.derrick@xxxxxxxxx>
• Re: [PATCH 14/15] vmd: use the proper dma_* APIs instead of direct methods calls
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 13/15] ACPI / scan: Refactor _CCA enforcement
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [RFC 5/6] powerpc/pci/hotplug: Use common drcinfo parsing
  • From: Michael Bringmann <mwb@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] PCIE support for i.MX8MQ
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 3/3] PCI: imx: Add support for i.MX8MQ
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: Regression caused by "PCI: Probe for device reset support during enumeration"
  • From: Alex Williamson <alex.williamson@xxxxxxxxxx>
• Re: [PATCH] PCI/AER: only insert one element into kfifo
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: Regression caused by "PCI: Probe for device reset support during enumeration"
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH V2] PCI: dwc ep: cache config until DBI regs available
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v9 3/6] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• [PATCH v9 6/6] PCI: Stub out pci_request_acs() when CONFIG_PCI is not set
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• Re: [PATCH v8 3/4] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• Re: [PATCH] PCI/VMD: Configure MPS settings before adding devices
  • From: Keith Busch <keith.busch@xxxxxxxxx>
• Re: [PATCH 15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 15/15] dma-mapping: bypass indirect calls for dma-direct
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 2/2] s390/pci: handle function enumeration after sriov enablement
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Regression caused by "PCI: Probe for device reset support during enumeration"
  • From: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
• Re: [PATCH 2/2] s390/pci: handle function enumeration after sriov enablement
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] PCI: provide pcibios_sriov_add_vfs
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [RFC PATCH 2/2] PCI/portdrv Hisilicon PCIe transport layer Port PMU driver.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH 1/2] pci/portdrv: Allow for vendor defined performance monitoring units.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH 0/2] Support HiSilicon PCIe Transport Layer PMU
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• PCI: pcim_iomap_regions() is not managed without pcim_enable_device() ?
  • From: Jose Abreu <jose.abreu@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  • From: Hanjie Lin <hanjie.lin@xxxxxxxxxxx>
• RE: [PATCH] dt-bindings: PCI: rcar: Add device tree support for r8a774c0
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: PCI: rcar: Add device tree support for r8a774c0
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/4] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [v4] PCI: imx: make msi work without CONFIG_PCIEPORTBUS=y
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [RFC PATCH] PCI/portdrv: Support for subtractive decode bridge
  • From: <honghui.zhang@xxxxxxxxxxxx>
• [PATCH v8 3/4] PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
  • From: Sinan Kaya <okaya@xxxxxxxxxx>
• RE: [v2] PCI: imx: make msi work without pcieportbus
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH 3/4] arm: dts: mt7623: Remove un-used property for PCIe
  • From: <honghui.zhang@xxxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: mt7622: Remove un-used property for PCIe
  • From: <honghui.zhang@xxxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: PCI: MediaTek: Remove un-used property
  • From: <honghui.zhang@xxxxxxxxxxxx>
• [PATCH 1/4] PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  • From: <honghui.zhang@xxxxxxxxxxxx>
• [PATCH 0/4] Cleanup un-used variant and un-used property for MediaTek PCIe
  • From: <honghui.zhang@xxxxxxxxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH v2 03/12] PCI: aardvark: Add PHY support
  • From: Marek Behun <marek.behun@xxxxxx>
• Re: [PATCH 05/12] PCI: aardvark: add suspend to RAM support
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: PCI: rcar: Add device tree support for r8a774c0
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [RFC] avoid indirect calls for DMA direct mappings v2
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH 2/2] s390/pci: handle function enumeration after sriov enablement
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• [PATCH 1/2] PCI: provide pcibios_sriov_add_vfs
  • From: Sebastian Ott <sebott@xxxxxxxxxxxxx>
• Re: [RFC] Proposed PCI ECR for description of Advanced Peer to Peer Capabilities
  • From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
• Re: [PATCH 5/5] switchtec: MRPC DMA mode implementation
  • From: Logan Gunthorpe <logang@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• [PATCH] VMD: Configuring bus settings
  • From: Jon Derrick <jonathan.derrick@xxxxxxxxx>
• [PATCH] PCI/VMD: Configure MPS settings before adding devices
  • From: Jon Derrick <jonathan.derrick@xxxxxxxxx>
• Re: [PATCH 0/5] Switchtec MRPC DMA mode support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 5/5] switchtec: MRPC DMA mode implementation
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 5/5] switchtec: MRPC DMA mode implementation
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 2/2] PCI: mediatek: Add controller support for MT7629
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 05/12] PCI: aardvark: add suspend to RAM support
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [RFC 4/6] dma: Add Synopsys eDMA IP PCIe glue-logic
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [v2] PCI: imx: make msi work without pcieportbus
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 10/12] ARM64: dts: marvell: armada-3720-espressobin: declare PCIe reset GPIO
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Re: [PATCH v2 10/12] ARM64: dts: marvell: armada-3720-espressobin: declare PCIe reset GPIO
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 05/12] PCI: aardvark: add suspend to RAM support
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v6 0/7] Add virtio-iommu driver
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [virtio-dev] Re: [PATCH v5 5/7] iommu: Add virtio-iommu driver
  • From: Auger Eric <eric.auger@xxxxxxxxxx>
• Re: [PATCH v6 0/7] Add virtio-iommu driver
  • From: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
• Re: [v2] PCI: imx: make msi work without pcieportbus
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [virtio-dev] Re: [PATCH v5 5/7] iommu: Add virtio-iommu driver
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [v2] PCI: imx: make msi work without pcieportbus
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [RFC 2/6] dma: Add Synopsys eDMA IP version 0 support
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [RFC 6/6] pci: pci_ids: Add Synopsys device id 0xedda
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [RFC 1/6] dma: Add Synopsys eDMA IP core driver
  • From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
• Re: [PATCH 05/12] PCI: aardvark: add suspend to RAM support
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v2 0/3] PCIe Host request to reserve IOVA
  • From: poza@xxxxxxxxxxxxxx
• Re: [v3] PCI: imx: make msi work without pcieportbus
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [v3] PCI: imx: make msi work without pcieportbus
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• [PATCH v2 2/3] iommu/dma: IOVA reserve for PCI host reserve address list
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• [PATCH v2 3/3] PCI: iproc: Add dma reserve resources to host
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• [PATCH v2 1/3] PCI: Add dma-resv window list
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• [PATCH v2 0/3] PCIe Host request to reserve IOVA
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• RE: [v2] PCI: imx: make msi work without pcieportbus
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [v2] PCI: imx: make msi work without pcieportbus
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] PCI: iproc: Add dma reserve resources to host
  • From: poza@xxxxxxxxxxxxxx
• RE: [v2] PCI: imx: make msi work without pcieportbus
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [RFC] Proposed PCI ECR for description of Advanced Peer to Peer Capabilities
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [v2] PCI: imx: make msi work without pcieportbus
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] PCI: iproc: Add dma reserve resources to host
  • From: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
• Re: [PATCH 05/12] PCI: aardvark: add suspend to RAM support
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [v2] PCI: imx: make msi work without pcieportbus
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• RE: [v2] PCI: imx: make msi work without pcieportbus
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [v2] PCI: imx: make msi work without pcieportbus
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [v2] PCI: imx: make msi work without pcieportbus
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• RE: [PATCH] PCI: imx: make msi work without pcieportbus
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [PATCH] PCI: imx: make msi work without pcieportbus
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• [PATCH] PCI: imx: make msi work without pcieportbus
  • From: Richard Zhu <hongxing.zhu@xxxxxxx>
• Re: [RFC PATCH 3/3] PCI: iproc: Add dma reserve resources to host
  • From: poza@xxxxxxxxxxxxxx