[PATCH v4 02/11] PCI: imx6: Drop imx6_pcie_wait_for_link()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



All calls to imx6_pcie_wait_for_link() share the same error path and
the state of PHY debug registers will already be printed there, so
there's no real reason we can't just use dw_pcie_wait_for_link(). Drop
imx6_pcie_wait_for_link() and replace it with dw_pcie_wait_for_link().

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Suggested-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-pci@xxxxxxxxxxxxxxx
---
 drivers/pci/controller/dwc/pci-imx6.c | 19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index ea2617712a3b..bb3dcfdbf697 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -723,21 +723,6 @@ static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
 	return 0;
 }
 
-static int imx6_pcie_wait_for_link(struct imx6_pcie *imx6_pcie)
-{
-	struct dw_pcie *pci = imx6_pcie->pci;
-	struct device *dev = pci->dev;
-
-	/* check if the link is up or not */
-	if (!dw_pcie_wait_for_link(pci))
-		return 0;
-
-	dev_dbg(dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
-		dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
-		dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
-	return -ETIMEDOUT;
-}
-
 static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
@@ -796,7 +781,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 	/* Start LTSSM. */
 	imx6_pcie_ltssm_enable(dev);
 
-	ret = imx6_pcie_wait_for_link(imx6_pcie);
+	ret = dw_pcie_wait_for_link(pci);
 	if (ret)
 		goto err_reset_phy;
 
@@ -834,7 +819,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 		}
 
 		/* Make sure link training is finished as well! */
-		ret = imx6_pcie_wait_for_link(imx6_pcie);
+		ret = dw_pcie_wait_for_link(pci);
 		if (ret) {
 			dev_err(dev, "Failed to bring link up!\n");
 			goto err_reset_phy;
-- 
2.20.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux