Both pcie-designware.c and pci-imx6.c contain custom definitions for
PHY debug registers R0/R1 and on top of that there's already a
definition for R0 in pcie-designware.h. Move all of the definitions to
pcie-designware.h. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-pci@xxxxxxxxxxxxxxx
---
drivers/pci/controller/dwc/pci-imx6.c | 6 ++----
drivers/pci/controller/dwc/pcie-designware.c | 12 +++---------
drivers/pci/controller/dwc/pcie-designware.h | 3 +++
3 files changed, 8 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index c0867df090f5..eeacdebd9b50 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -103,8 +103,6 @@ struct imx6_pcie {
/* PCIe Port Logic registers (memory-mapped) */
#define PL_OFFSET 0x700
-#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
-#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
#define PCIE_PHY_CTRL_DATA_LOC 0
@@ -831,8 +829,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
err_reset_phy:
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
- dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
- dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
+ dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
+ dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
imx6_pcie_reset_phy(imx6_pcie);
return ret;
}
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 31f6331ca46f..086e87a40316 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -14,12 +14,6 @@
#include "pcie-designware.h"
-/* PCIe Port Logic registers */
-#define PLR_OFFSET 0x700
-#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_LINK_UP (0x1 << 4)
-#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING (0x1 << 29)
-
int dw_pcie_read(void __iomem *addr, int size, u32 *val)
{
if (!IS_ALIGNED((uintptr_t)addr, size)) {
@@ -334,9 +328,9 @@ int dw_pcie_link_up(struct dw_pcie *pci)
if (pci->ops->link_up)
return pci->ops->link_up(pci);
- val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1);
- return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) &&
- (!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
+ val = readl(pci->dbi_base + PCIE_PORT_DEBUG1);
+ return ((val & PCIE_PORT_DEBUG1_LINK_UP) &&
+ (!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
}
void dw_pcie_setup(struct dw_pcie *pci)
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 377f4c0b52da..b33ae13194be 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -41,6 +41,9 @@
#define PCIE_PORT_DEBUG0 0x728
#define PORT_LOGIC_LTSSM_STATE_MASK 0x1f
#define PORT_LOGIC_LTSSM_STATE_L0 0x11
+#define PCIE_PORT_DEBUG1 0x72C
+#define PCIE_PORT_DEBUG1_LINK_UP BIT(4)
+#define PCIE_PORT_DEBUG1_LINK_IN_TRAINING BIT(29)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE BIT(17)
--
2.20.1
