Re: [v3 PATCH 1/2] PCI: read fixed bus numbers in EA for type 1 functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 23, 2019 at 06:48:00PM +0530, sundeep.lkml@xxxxxxxxx wrote:
> From: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>
> 
> As per the spec - ECN_Enhanced_Allocation_23_Oct_2014_Final
> and section 6.9.1.2, EA capability contains fixed secondary
> and subordinate bus numbers for type 1 functions.
> This patch adds support to read the fixed bus numbers
> from EA capability for bridge.
> 
> Signed-off-by: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>
> ---
> v3:
>   As per Bjorn's suggestion placed EA stuff in pci_ea_init and
>   captured bus numbers in pci_dev

You were right the first time, and my idea of putting this stuff in
pci_ea_init() was well-intentioned but wrong.  It doesn't seem
worthwhile to add those two fields to pci_dev when they will almost
always be unused.

I applied your v2 patch and revised it a little; I'll respond to that
patch so the comments make sense there.

> v2:
>   None just added Sean
> 
>  drivers/pci/pci.c             | 10 ++++++++--
>  include/linux/pci.h           |  4 ++++
>  include/uapi/linux/pci_regs.h |  4 ++++
>  3 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index c25acac..484b63e 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2909,6 +2909,7 @@ void pci_ea_init(struct pci_dev *dev)
>  	u8 num_ent;
>  	int offset;
>  	int i;
> +	u32 dw;
>  
>  	/* find PCI EA capability in list */
>  	ea = pci_find_capability(dev, PCI_CAP_ID_EA);
> @@ -2922,9 +2923,14 @@ void pci_ea_init(struct pci_dev *dev)
>  
>  	offset = ea + PCI_EA_FIRST_ENT;
>  
> -	/* Skip DWORD 2 for type 1 functions */
> -	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
> +	/* Note fixed bus numbers for type 1 functions */
> +	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> +		pci_read_config_dword(dev, offset, &dw);
> +		dev->fixed_sec_busnr = dw & PCI_EA_FIXED_SEC_BUS;
> +		dev->fixed_sub_busnr = (dw & PCI_EA_FIXED_SUB_BUS) >>
> +					PCI_EA_FIXED_SUB_SHIFT;
>  		offset += 4;
> +	}
>  
>  	/* parse each EA entry */
>  	for (i = 0; i < num_ent; ++i)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 65f1d8c..3e9a3ae 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -459,6 +459,10 @@ struct pci_dev {
>  	char		*driver_override; /* Driver name to force a match */
>  
>  	unsigned long	priv_flags;	/* Private flags for the PCI driver */
> +
> +	/* bus numbers from EA capability if this device is a bridge */
> +	u8 fixed_sec_busnr; /* Fixed Secondary Bus number */
> +	u8 fixed_sub_busnr; /* Fixed Subordinate Bus number */
>  };
>  
>  static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index e1e9888..51e9ac0 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -372,6 +372,10 @@
>  #define PCI_EA_FIRST_ENT_BRIDGE	8	/* First EA Entry for Bridges */
>  #define  PCI_EA_ES		0x00000007 /* Entry Size */
>  #define  PCI_EA_BEI		0x000000f0 /* BAR Equivalent Indicator */
> +/* Fixed Secondary and Subordinate bus numbers in EA for Bridge */
> +#define   PCI_EA_FIXED_SEC_BUS		0xff
> +#define   PCI_EA_FIXED_SUB_BUS		0xff00
> +#define   PCI_EA_FIXED_SUB_SHIFT	8
>  /* 0-5 map to BARs 0-5 respectively */
>  #define   PCI_EA_BEI_BAR0		0
>  #define   PCI_EA_BEI_BAR5		5
> -- 
> 1.8.3.1
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux