Outstanding write counter in AFI is used to generate idle signal to dynamically gate the AFI clock. When there are 32 outstanding writes from AFI to memory, the outstanding write counter overflows and indicates that there are "0" outstanding write transactions. When memory controller is under heavy load, write completions to AFI gets delayed and AFI write counter overflows. This causes AFI clock gating even when there are outstanding transactions towards memory controller resulting in system hang. Disable dynamic clock gating of AFI clock to avoid system hang. CLKEN_OVERRIDE bit is not defined in Tegra20 and Tegra30, however programming this bit doesn't cause any side effects. Program this bit for all Tegra SoCs to avoid conditional check. Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx> Acked-by: Thierry Reding <treding@xxxxxxxxxx> --- V2: No change drivers/pci/controller/pci-tegra.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c index c16a87d32bf4..8b62559f5777 100644 --- a/drivers/pci/controller/pci-tegra.c +++ b/drivers/pci/controller/pci-tegra.c @@ -95,7 +95,8 @@ #define AFI_MSI_EN_VEC7 0xa8 #define AFI_CONFIGURATION 0xac -#define AFI_CONFIGURATION_EN_FPCI (1 << 0) +#define AFI_CONFIGURATION_EN_FPCI (1 << 0) +#define AFI_CONFIGURATION_CLKEN_OVERRIDE (1 << 31) #define AFI_FPCI_ERROR_MASKS 0xb0 @@ -1065,9 +1066,10 @@ static void tegra_pcie_enable_controller(struct tegra_pcie *pcie) afi_writel(pcie, value, AFI_FUSE); } - /* finally enable PCIe */ + /* Disable AFI dynamic clock gating and enable PCIe */ value = afi_readl(pcie, AFI_CONFIGURATION); value |= AFI_CONFIGURATION_EN_FPCI; + value |= AFI_CONFIGURATION_CLKEN_OVERRIDE; afi_writel(pcie, value, AFI_CONFIGURATION); value = AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR | -- 2.17.1
