On Sat, Apr 27, 2019 at 02:13:01PM -0500, fred@xxxxxxxxxxxx wrote:
> From: Frederick Lawler <fred@xxxxxxxxxxxx>
>
> Replace remaining instances of dev_*() printk wrappers with pci_*()
> printk wrappers. No functional change intended.
>
> Signed-off-by: Frederick Lawler <fred@xxxxxxxxxxxx>
> ---
> drivers/pci/pcie/aer.c | 13 ++++++-------
> drivers/pci/pcie/aer_inject.c | 4 ++--
> drivers/pci/pcie/dpc.c | 27 ++++++++++++---------------
> 3 files changed, 20 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index f8fc2114ad39..224d878a28b4 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -964,8 +964,7 @@ static bool find_source_device(struct pci_dev *parent,
> pci_walk_bus(parent->subordinate, find_device_iter, e_info);
>
> if (!e_info->error_dev_num) {
> - pci_printk(KERN_DEBUG, parent, "can't find device of ID%04x\n",
> - e_info->id);
> + pci_dbg(parent, "can't find device of ID%04x\n", e_info->id);
I don't like dev_dbg() and pci_dbg() because the behavior depends on
CONFIG_DYNAMIC_DEBUG, DEBUG, etc.
They may be fine for development, but for production, I want to be
able to users for "a complete dmesg log". I don't want to have to ask
them to "please rebuild your kernel with CONFIG_DYNAMIC_DEBUG=n and
boot with 'dyndbg=xxx'"
For that reason I prefer the "pci_printk(KERN_DEBUG)" because that
output always goes to the dmesg log.
But "pci_printk(KERN_DEBUG)" is definitely ugly. I think the way to
fix that is to convert it to "pci_info()" instead.
> return false;
> }
> return true;
> @@ -1377,10 +1376,11 @@ static int aer_probe(struct pcie_device *dev)
> int status;
> struct aer_rpc *rpc;
> struct device *device = &dev->device;
> + struct pci_dev *pdev = dev->port;
>
> rpc = devm_kzalloc(device, sizeof(struct aer_rpc), GFP_KERNEL);
> if (!rpc) {
> - dev_printk(KERN_DEBUG, device, "alloc AER rpc failed\n");
> + pci_dbg(pdev, "alloc AER rpc failed\n");
This hunk converts from using the pcie_device to the pci_dev, so it
belongs in a different patch.
> return -ENOMEM;
> }
> rpc->rpd = dev->port;
> @@ -1389,13 +1389,12 @@ static int aer_probe(struct pcie_device *dev)
> status = devm_request_threaded_irq(device, dev->irq, aer_irq, aer_isr,
> IRQF_SHARED, "aerdrv", dev);
> if (status) {
> - dev_printk(KERN_DEBUG, device, "request AER IRQ %d failed\n",
> - dev->irq);
> + pci_dbg(pdev, "request AER IRQ %d failed\n", dev->irq);
> return status;
This one also.
> }
>
> aer_enable_rootport(rpc);
> - dev_info(device, "AER enabled with IRQ %d\n", dev->irq);
> + pci_info(pdev, "AER enabled with IRQ %d\n", dev->irq);
And this, and many others below. *This* patch should only convert
- pci_printk(KERN_DEBUG, pdev, ...)
+ pci_info(pdev, ...)
and
- dev_printk(KERN_DEBUG, pcie_dev, ...)
+ dev_info(pcie_dev, ...)
> return 0;
> }
>
> @@ -1419,7 +1418,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
> pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
>
> rc = pci_bus_error_reset(dev);
> - pci_printk(KERN_DEBUG, dev, "Root Port link has been reset\n");
> + pci_dbg(dev, "Root Port link has been reset\n");
>
> /* Clear Root Error Status */
> pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, ®32);
> diff --git a/drivers/pci/pcie/aer_inject.c b/drivers/pci/pcie/aer_inject.c
> index 95d4759664b3..610b617ae600 100644
> --- a/drivers/pci/pcie/aer_inject.c
> +++ b/drivers/pci/pcie/aer_inject.c
> @@ -460,12 +460,12 @@ static int aer_inject(struct aer_error_inj *einj)
> if (device) {
> edev = to_pcie_device(device);
> if (!get_service_data(edev)) {
> - dev_warn(&edev->device,
> + pci_warn(edev->port,
> "aer_inject: AER service is not initialized\n");
> ret = -EPROTONOSUPPORT;
> goto out_put;
> }
> - dev_info(&edev->device,
> + pci_info(edev->port,
> "aer_inject: Injecting errors %08x/%08x into device %s\n",
> einj->cor_status, einj->uncor_status, pci_name(dev));
> local_irq_disable();
> diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
> index 7b77754a82de..72659286191b 100644
> --- a/drivers/pci/pcie/dpc.c
> +++ b/drivers/pci/pcie/dpc.c
> @@ -100,7 +100,6 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
> {
> unsigned long timeout = jiffies + HZ;
> struct pci_dev *pdev = dpc->dev->port;
> - struct device *dev = &dpc->dev->device;
> u16 cap = dpc->cap_pos, status;
>
> pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
> @@ -110,7 +109,7 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
> pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
> }
> if (status & PCI_EXP_DPC_RP_BUSY) {
> - dev_warn(dev, "DPC root port still busy\n");
> + pci_warn(pdev, "DPC root port still busy\n");
> return -EBUSY;
> }
> return 0;
> @@ -148,7 +147,6 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
>
> static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
> {
> - struct device *dev = &dpc->dev->device;
> struct pci_dev *pdev = dpc->dev->port;
> u16 cap = dpc->cap_pos, dpc_status, first_error;
> u32 status, mask, sev, syserr, exc, dw0, dw1, dw2, dw3, log, prefix;
> @@ -156,13 +154,13 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
>
> pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, &status);
> pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_MASK, &mask);
> - dev_err(dev, "rp_pio_status: %#010x, rp_pio_mask: %#010x\n",
> + pci_err(pdev, "rp_pio_status: %#010x, rp_pio_mask: %#010x\n",
> status, mask);
>
> pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_SEVERITY, &sev);
> pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_SYSERROR, &syserr);
> pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_EXCEPTION, &exc);
> - dev_err(dev, "RP PIO severity=%#010x, syserror=%#010x, exception=%#010x\n",
> + pci_err(pdev, "RP PIO severity=%#010x, syserror=%#010x, exception=%#010x\n",
> sev, syserr, exc);
>
> /* Get First Error Pointer */
> @@ -171,7 +169,7 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
>
> for (i = 0; i < ARRAY_SIZE(rp_pio_error_string); i++) {
> if ((status & ~mask) & (1 << i))
> - dev_err(dev, "[%2d] %s%s\n", i, rp_pio_error_string[i],
> + pci_err(pdev, "[%2d] %s%s\n", i, rp_pio_error_string[i],
> first_error == i ? " (First)" : "");
> }
>
> @@ -185,18 +183,18 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
> &dw2);
> pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG + 12,
> &dw3);
> - dev_err(dev, "TLP Header: %#010x %#010x %#010x %#010x\n",
> + pci_err(pdev, "TLP Header: %#010x %#010x %#010x %#010x\n",
> dw0, dw1, dw2, dw3);
>
> if (dpc->rp_log_size < 5)
> goto clear_status;
> pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_IMPSPEC_LOG, &log);
> - dev_err(dev, "RP PIO ImpSpec Log %#010x\n", log);
> + pci_err(pdev, "RP PIO ImpSpec Log %#010x\n", log);
>
> for (i = 0; i < dpc->rp_log_size - 5; i++) {
> pci_read_config_dword(pdev,
> cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG, &prefix);
> - dev_err(dev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
> + pci_err(pdev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
> }
> clear_status:
> pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, status);
> @@ -229,18 +227,17 @@ static irqreturn_t dpc_handler(int irq, void *context)
> struct aer_err_info info;
> struct dpc_dev *dpc = context;
> struct pci_dev *pdev = dpc->dev->port;
> - struct device *dev = &dpc->dev->device;
> u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
>
> pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
> pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID, &source);
>
> - dev_info(dev, "DPC containment event, status:%#06x source:%#06x\n",
> + pci_info(pdev, "DPC containment event, status:%#06x source:%#06x\n",
> status, source);
>
> reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN) >> 1;
> ext_reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT) >> 5;
> - dev_warn(dev, "DPC %s detected\n",
> + pci_warn(pdev, "DPC %s detected\n",
> (reason == 0) ? "unmasked uncorrectable error" :
> (reason == 1) ? "ERR_NONFATAL" :
> (reason == 2) ? "ERR_FATAL" :
> @@ -307,7 +304,7 @@ static int dpc_probe(struct pcie_device *dev)
> dpc_handler, IRQF_SHARED,
> "pcie-dpc", dpc);
> if (status) {
> - dev_warn(device, "request IRQ%d failed: %d\n", dev->irq,
> + pci_warn(pdev, "request IRQ%d failed: %d\n", dev->irq,
> status);
> return status;
> }
> @@ -319,7 +316,7 @@ static int dpc_probe(struct pcie_device *dev)
> if (dpc->rp_extensions) {
> dpc->rp_log_size = (cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
> if (dpc->rp_log_size < 4 || dpc->rp_log_size > 9) {
> - dev_err(device, "RP PIO log size %u is invalid\n",
> + pci_err(pdev, "RP PIO log size %u is invalid\n",
> dpc->rp_log_size);
> dpc->rp_log_size = 0;
> }
> @@ -328,7 +325,7 @@ static int dpc_probe(struct pcie_device *dev)
> ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
> pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
>
> - dev_info(device, "DPC error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
> + pci_info(pdev, "DPC error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
> cap & PCI_EXP_DPC_IRQ, FLAG(cap, PCI_EXP_DPC_CAP_RP_EXT),
> FLAG(cap, PCI_EXP_DPC_CAP_POISONED_TLP),
> FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), dpc->rp_log_size,
> --
> 2.17.1
>
