[PATCH V2 26/28] dt-bindings: pci: tegra: Document reset-gpio optional prop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document "reset-gpio" optional property which supports GPIO based PERST#
signal.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
---
V2: Using standard "reset-gpio" property

 .../devicetree/bindings/pci/nvidia,tegra20-pcie.txt          | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 7939bca47861..4e75e017f660 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -162,6 +162,10 @@ Required properties:
   - Root port 0 uses 4 lanes, root port 1 is unused.
   - Both root ports use 2 lanes.
 
+Optional properties:
+- reset-gpio: If GPIO is used as PERST# signal instead of available
+  SFIO, add this property with phandle to GPIO controller and GPIO number.
+
 Required properties for Tegra124 and later:
 - phys: Must contain an phandle to a PHY for each entry in phy-names.
 - phy-names: Must include an entry for each active lane. Note that the number
@@ -626,6 +630,7 @@ SoC DTSI:
 			ranges;
 
 			nvidia,num-lanes = <2>;
+			reset-gpio = <&gpio TEGRA_GPIO(A, 3) 0>;
 		};
 
 		pci@2,0 {
-- 
2.17.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux