Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- [PATCH v2 00/26] Add support for PCIe RC and EP mode in TI's AM654 SoC
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 04/26] PCI: keystone: Perform host initialization in a single function
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 01/26] PCI: keystone: Add start_link/stop_link dw_pcie_ops
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 24/26] PCI: designware-ep: Use aligned ATU window for raising MSI interrupts
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 13/26] dt-bindings: PCI: Add PCI RC dt binding documentation for AM654
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 05/26] PCI: keystone: Use platform_get_resource_byname to get memory resources
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 10/26] PCI: dwc: Enable iATU unroll for endpoint too
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 12/26] PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 14/26] PCI: keystone: Add support for PCIe RC in AM654x Platforms
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 25/26] misc: pci_endpoint_test: Add support to test PCI EP in AM654x
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 11/26] PCI: dwc: Fix ATU identification for designware version >= 4.80
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 23/26] PCI: designware-ep: Configure RESBAR to advertise the smallest size
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 26/26] misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 22/26] PCI: keystone: Add support for PCIe EP in AM654x Platforms
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 21/26] PCI: dwc: Add callbacks for accessing dbi2 address space
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 19/26] PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 17/26] PCI: keystone: Add support to set the max link speed from DT
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 16/26] PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 20/26] PCI: dwc: Fix dw_pcie_ep_find_capability to return correct capability offset
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 18/26] PCI: endpoint: Add support to allocate aligned buffers to be mapped in BARs
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 15/26] PCI: keystone: Invoke phy_reset API before enabling PHY
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 07/26] dt-bindings: PCI: Add dt-binding to configure PCIe mode
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 09/26] dt-bindings: PCI: Document "atu" reg-names
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 08/26] PCI: keystone: Explicitly set the PCIe mode
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 06/26] PCI: keystone: Move initializations to appropriate places
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v2 02/26] PCI: keystone: Cleanup error_irq configuration
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 0/5] AM437x: Add rtc-only + DDR mode support
- From: keerthy <j-keerthy@xxxxxx>
- [PATCH] usb: musb: omap2430: Add support for idling phy when musb is idle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] phy: phy-twl4030-usb: Fix cable state handling
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2] mtd: rawnand: ams-delta: Drop board specific partition info
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH] mtd: rawnand: ams-delta: Drop board specific partition info
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH] mtd: rawnand: ams-delta: Drop board specific partition info
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH] mtd: rawnand: ams-delta: Drop board specific partition info
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH] mtd: rawnand: ams-delta: Drop board specific partition info
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] mtd: rawnand: ams-delta: Drop board specific partition info
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH] usb: core: Add PM runtime calls to usb_hcd_platform_shutdown
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am335x-evm: Correct the regulators for the audio codec
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] usb: core: Add PM runtime calls to usb_hcd_platform_shutdown
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: host: ohci-platform: Implement ohci_platform_shutdown
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: host: ohci-platform: Implement ohci_platform_shutdown
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: host: ohci-platform: Implement ohci_platform_shutdown
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: host: ohci-platform: Implement ohci_platform_shutdown
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] usb: host: ohci-platform: Implement ohci_platform_shutdown
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] AM437x: Add rtc-only + DDR mode support
- From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
- [PATCH] usb: host: ohci-platform: Implement ohci_platform_shutdown
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 5/5] soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 3/5] arm: mach-omap2: pm33xx: Add support for rtc+ddr in self refresh mode
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 0/5] AM437x: Add rtc-only + DDR mode support
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 2/5] rtc: interface: Add power_off_program to rtc_class_ops
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 4/5] soc: ti: pm33xx: Push the am33xx_push_sram_idle to the top
- From: Keerthy <j-keerthy@xxxxxx>
- [PATCH 1/5] rtc: OMAP: Add support for rtc-only mode
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCHv2] mfd: twl6040: Fix device init errors for ACCCTL register
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] mtd: rawnand: ams-delta: Drop board specific partition info
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- [PATCH] mtd: rawnand: ams-delta: Drop board specific partition info
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- [PATCH] ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
- From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
- Re: [PATCH 10/61] gpio: simplify getting .drvdata
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH v3 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH v3 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH v3 1/2] mmc: sdhci: Make sdhci_send_command() public
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH v3 1/2] mmc: sdhci: Make sdhci_send_command() public
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v3 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v3 1/2] mmc: sdhci: Make sdhci_send_command() public
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v3 0/2] Fixes for commands errors during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [RFC PATCH v2 5/7] i2c: busses: omap: Add the master_xfer_irqless hook
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 5/7] i2c: busses: omap: Add the master_xfer_irqless hook
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [RFC PATCH v2 6/7] i2c: tegra-bpmp: convert to use new atomic callbacks
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [RFC PATCH v2 4/7] i2c: demux: WIP: handle the new atomic callbacks
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [RFC PATCH v2 3/7] i2c: core: introduce callbacks for atomic transfers
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [RFC PATCH v2 2/7] i2c: core: use I2C locking behaviour also for SMBUS
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [RFC PATCH v2 1/7] i2c: apply coding style for struct i2c_adapter
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [PATCH] ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] ARM: dts: am335x-evm: Correct the regulators for the audio codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] ARM: dts: am335x-evm: Correct the regulators for the audio codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 05/42] drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: am335x: Replaced register offsets with defines
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Applied "ASoC: ti: remove compat dma probing" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] ARM: omap2: remove incorrect __init annotation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: dts: am335x: Replaced register offsets with defines
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: am335x: Replace numeric pinmux address with macro defines
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH] ARM: dts: am335x-evm: Correct the regulators for the audio codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH] gpio: omap: avoid clang warning
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH] drivers: gpio: omap: use devm_platform_ioremap_resource()
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
- From: Hans Verkuil <hverkuil@xxxxxxxxx>
- Re: [PATCH] arch: arm: Kconfig: pedantic formatting
- From: khalasa@xxxxxxx (Krzysztof Hałasa)
- Re: [PATCH] arch: arm: Kconfig: pedantic formatting
- From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
- [PATCH AUTOSEL 4.20 29/60] ARM: dts: am335x-evm: Fix PHY mode for ethernet
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.20 28/60] ARM: dts: am335x-evmsk: Fix PHY mode for ethernet
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Applied "ASoC: ti: remove compat dma probing" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH 1/2] ARM: dts: am335x: Replace numeric pinmux address with macro defines
- From: Christina Quast <cquast@xxxxxxxxxxxxxxxxxxx>
- [PATCH 0/2] ARM: dts: am335x: Replace numeric pinmux address with macro defines
- From: Christina Quast <cquast@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v2 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: "Hunter, Adrian" <adrian.hunter@xxxxxxxxx>
- Re: [PATCH] arch: arm: Kconfig: pedantic formatting
- From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
- Re: [PATCH] regulator: palmas: Remove *rdev[PALMAS_NUM_REGS] from struct palmas_pmic
- From: Keerthy <j-keerthy@xxxxxx>
- Re: [PATCH] arch: arm: Kconfig: pedantic formatting
- From: "Andrew Jeffery" <andrew@xxxxxxxx>
- Re: [PATCH 26/42] drivers: gpio: rcar: pendantic formatting
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 27/42] drivers: gpio: rcar: use devm_platform_ioremap_resource()
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: "Rizvi, Mohammad Faiz Abbas" <faiz_abbas@xxxxxx>
- Re: [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: "Rizvi, Mohammad Faiz Abbas" <faiz_abbas@xxxxxx>
- Re: [PATCH 38/42] drivers: gpio: vr41xx: use devm_platform_ioremap_resource()
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [RFC PATCH v2 0/7] i2c: core: introduce atomic transfers
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 38/42] drivers: gpio: vr41xx: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
- Re: [PATCH 16/42] drivers: gpio: janz-ttl: drop unneccessary temp variable dev
- From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
- Re: [PATCH 42/42] drivers: gpio: use devm_platform_ioremap_resource()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 38/42] drivers: gpio: vr41xx: use devm_platform_ioremap_resource()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 33/42] drivers: gpio: tegra: use devm_platform_ioremap_resource()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 26/42] drivers: gpio: rcar: pendantic formatting
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 16/42] drivers: gpio: janz-ttl: drop unneccessary temp variable dev
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 12/42] drivers: gpio: grgpio: use devm_platform_ioremap_resource()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 10/42] drivers: gpio: ep93xx: devm_platform_ioremap_resource()
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 03/42] drivers: gpio: amdpt: drop unneeded deref of &pdev->dev
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 20/42] drivers: gpio: mt7621: use devm_platform_ioremap_resource()
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH 36/42] drivers: gpio: uniphier: use devm_platform_ioremap_resource()
- From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
- Re: [PATCH 16/42] drivers: gpio: janz-ttl: drop unneccessary temp variable dev
- From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
- Re: [PATCH 16/42] drivers: gpio: janz-ttl: drop unneccessary temp variable dev
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
- Re: [PATCH 09/42] drivers: gpio: sprd: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
- Re: [PATCH 29/42] drivers: gpio: sprd: use devm_platform_ioremap_resource()
- From: Baolin Wang <baolin.wang@xxxxxxxxxx>
- Re: [PATCH 09/42] drivers: gpio: sprd: use devm_platform_ioremap_resource()
- From: Baolin Wang <baolin.wang@xxxxxxxxxx>
- [PATCH AUTOSEL 4.20 13/52] ARM: dts: Configure clock parent for pwm vibra
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.20 14/52] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.20 24/52] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 13/44] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 12/44] ARM: dts: Configure clock parent for pwm vibra
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 22/44] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH 18/42] drivers: gpio: lpc18xx: use devm_platform_ioremap_resource()
- From: Vladimir Zapolskiy <vz@xxxxxxxxx>
- [PATCH AUTOSEL 4.14 12/27] ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 08/27] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.9 04/12] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.4 4/8] ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH] drivers: gpio: omap: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- Re: [PATCH 24/42] drivers: gpio: use devm_platform_ioremap_resource()
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH 23/42] drivers: gpio: use devm_platform_ioremap_resource()
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH 04/42] drivers: gpio: aspeed: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 09/42] drivers: gpio: sprd: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 01/42] drivers: gpio: 74xx-mmio: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 05/42] drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 03/42] drivers: gpio: amdpt: drop unneeded deref of &pdev->dev
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- Re: [PATCH 05/42] drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- [PATCH 11/42] drivers: gpio: ftgpio010: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 15/42] drivers: gpio: janz-ttl: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 17/42] drivers: gpio: loongon1: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 18/42] drivers: gpio: lpc18xx: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 20/42] drivers: gpio: mt7621: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 16/42] drivers: gpio: janz-ttl: drop unneccessary temp variable dev
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 14/42] drivers: gpio: iop: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 12/42] drivers: gpio: grgpio: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 10/42] drivers: gpio: ep93xx: devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 06/42] drivers: gpio: cadence: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 07/42] drivers: gpio: clps711x: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 02/42] drivers: gpio: amdpt: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 19/42] drivers: gpio: mb86s7x: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 22/42] drivers: gpio: mxc: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 13/42] drivers: gpio: hlwd: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 21/42] drivers: gpio: mvebu: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 23/42] drivers: gpio: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 24/42] drivers: gpio: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 27/42] drivers: gpio: rcar: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 26/42] drivers: gpio: rcar: pendantic formatting
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 32/42] drivers: gpio: tb10x: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 28/42] drivers: gpio: spear-spics: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 25/42] drivers: gpio: pxa: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 29/42] drivers: gpio: sprd: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 35/42] drivers: gpio: ts4800: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 31/42] drivers: gpio: stp-xway: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 33/42] drivers: gpio: tegra: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 34/42] drivers: gpio: timberdale: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 36/42] drivers: gpio: uniphier: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 30/42] drivers: gpio: sta2x11: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 37/42] drivers: gpio: vf610: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 39/42] drivers: gpio: xgene-sb: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 38/42] drivers: gpio: vr41xx: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 40/42] drivers: gpio: zx: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 41/42] drivers: gpio: xlp: devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 42/42] drivers: gpio: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- [PATCH 08/42] drivers: gpio: dwap: use devm_platform_ioremap_resource()
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- Applied "ASoC: ti: remove compat dma probing" to the asoc tree
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] arch: arm: Kconfig: pedantic formatting
- From: Lubomir Rintel <lkundrak@xxxxx>
- [PATCH] arch: arm: Kconfig: pedantic formatting
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- Re: [PATCH] gpio: omap: avoid clang warning
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] gpio: omap: avoid clang warning
- From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
- Re: Nokia N900: wl1251 spi3.0: EOW timed out on
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: Nokia N900: wl1251 spi3.0: EOW timed out on
- From: Merlijn Wajer <merlijn@xxxxxxxxxx>
- [PATCH] regulator: palmas: Remove *rdev[PALMAS_NUM_REGS] from struct palmas_pmic
- From: Axel Lin <axel.lin@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Nokia N900: wl1251 spi3.0: EOW timed out on
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- Re: Nokia N900: wl1251 spi3.0: EOW timed out on
- From: Merlijn Wajer <merlijn@xxxxxxxxxx>
- Nokia N900: wl1251 spi3.0: EOW timed out on
- From: Merlijn Wajer <merlijn@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Merlijn Wajer <merlijn@xxxxxxxxxx>
- Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH] gpio: gpio-omap: fix level interrupt idling
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: remove block layer bounce buffering for MMC v2
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: remove block layer bounce buffering for MMC v2
- From: Christoph Hellwig <hch@xxxxxx>
- Re: [PATCH 10/61] gpio: simplify getting .drvdata
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 10/61] gpio: simplify getting .drvdata
- From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
- Re: [PATCH 10/61] gpio: simplify getting .drvdata
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 10/61] gpio: simplify getting .drvdata
- From: Adam Ford <aford173@xxxxxxxxx>
- [PATCH] clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] davinci_emac: always build in CONFIG_OF code
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v5 00/18] mfd: demodularization of non-modular drivers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: omap2: remove incorrect __init annotation
- From: Nathan Chancellor <natechancellor@xxxxxxxxx>
- [PATCH 1/3] ASoC: ti: remove compat dma probing
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] davinci_emac: always build in CONFIG_OF code
- From: Nathan Chancellor <natechancellor@xxxxxxxxx>
- Re: [PATCH 2/3] ASoC: ti: remove compat dma probing
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 2/3] ASoC: ti: remove compat dma probing
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [omap:droid4-pending-mdm-v5.0 5/12] drivers/mfd/motorola-mdm.c:1186: undefined reference to `gsm_serdev_unregister_device'
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH] ARM: omap2: remove incorrect __init annotation
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH] gpio: omap: avoid clang warning
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH] davinci_emac: always build in CONFIG_OF code
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 00/18] mfd: demodularization of non-modular drivers
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v5 00/18] mfd: demodularization of non-modular drivers
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v5 00/18] mfd: demodularization of non-modular drivers
- From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
- Re: [RFC PATCH v2 0/7] i2c: core: introduce atomic transfers
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v5 00/18] mfd: demodularization of non-modular drivers
- From: Pavel Machek <pavel@xxxxxx>
- [PATCH] drivers: video: fbdev: Kconfig: pedantic cleanups
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- Re: [PATCH] gpio: gpio-omap: fix level interrupt idling
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH v2 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH v2 0/2] Fixes for command errors during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [RFC PATCH v2 0/7] i2c: core: introduce atomic transfers
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 2/3] ASoC: ti: remove compat dma probing
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [RFC PATCH v2 0/7] i2c: core: introduce atomic transfers
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [RFC PATCH v2 6/7] i2c: tegra-bpmp: convert to use new atomic callbacks
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [RFC PATCH v2 2/7] i2c: core: use I2C locking behaviour also for SMBUS
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC PATCH v2 6/7] i2c: tegra-bpmp: convert to use new atomic callbacks
- From: Timo Alho <talho@xxxxxxxxxx>
- [PATCH] omapfb: Fix potential NULL pointer dereference in kmalloc
- From: Aditya Pakki <pakki001@xxxxxxx>
- Re: [RFC PATCH v2 0/7] i2c: core: introduce atomic transfers
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [RFC PATCH v2 4/7] i2c: demux: WIP: handle the new atomic callbacks
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v2 2/7] i2c: core: use I2C locking behaviour also for SMBUS
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v2 3/7] i2c: core: introduce callbacks for atomic transfers
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v2 1/7] i2c: apply coding style for struct i2c_adapter
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v2 0/7] i2c: core: introduce atomic transfers
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v2 6/7] i2c: tegra-bpmp: convert to use new atomic callbacks
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v2 7/7] i2c: algo: bit: HACK! add atomic callback
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v2 5/7] i2c: busses: omap: Add the master_xfer_irqless hook
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH net-next 4/6] ethernet: eth: add default vid len for all ehternet kind devices
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH net-next 3/6] net: 8021q: vlan_dev: add vid tag for vlan device own address
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH net-next 2/6] net: 8021q: vlan_dev: add vid tag to addresses of uc and mc lists
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH -next] fbdev: omap2: omapfb: trivial code cleanup
- From: YueHaibing <yuehaibing@xxxxxxxxxx>
- [PATCH] gpio: gpio-omap: fix level interrupt idling
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] net: cpsw: fix obtaining mac address for am3517
- From: Måns Rullgård <mans@xxxxxxxxx>
- Re: [PATCH -next] fbdev: omap2: omapfb: trivial code cleanup
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- Re: [PATCH] fbdev: omap2: fix warnings in dss core
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- Re: [PATCH net-next 4/6] ethernet: eth: add default vid len for all ehternet kind devices
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH net-next 3/6] net: 8021q: vlan_dev: add vid tag for vlan device own address
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH net-next 2/6] net: 8021q: vlan_dev: add vid tag to addresses of uc and mc lists
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: [PATCH net-next 1/6] net: core: dev_addr_lists: add VID to device address
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH v2 1/2] mmc: sdhci: Add platform_cmd_err() to sdhci_ops
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 0/2] Fixes for command errors during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH] mfd: twl-core: disable irq while suspended
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH 7/8] PCI: mediatek: fix a leaked reference by adding missing of_node_put
- From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx>
- [PATCH -next] fbdev: omap2: omapfb: trivial code cleanup
- From: Yue Haibing <yuehaibing@xxxxxxxxxx>
- [PATCH] mfd: tps65910: Properly disable the power on state
- From: Robert Yang <decatf@xxxxxxxxx>
- [PATCH AUTOSEL 4.20 01/81] ARM: OMAP: dts: N950/N9: fix onenand timings
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.20 21/81] ARM: dts: am335x-shc.dts: fix wrong cd pin level
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.20 20/81] ARM: dts: n900: fix mmc1 card detect gpio polarity
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.20 19/81] ARM: dts: omap3-gta04: Fix graph_port warning
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.20 70/81] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 01/64] ARM: OMAP: dts: N950/N9: fix onenand timings
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 56/64] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 33/36] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH net-next 4/6] ethernet: eth: add default vid len for all ehternet kind devices
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH net-next 1/6] net: core: dev_addr_lists: add VID to device address
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH net-next 5/6] net: ethernet: ti: cpsw: update mc filtering to use IVDF
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH net-next 3/6] net: 8021q: vlan_dev: add vid tag for vlan device own address
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH net-next 2/6] net: 8021q: vlan_dev: add vid tag to addresses of uc and mc lists
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH net-next 0/6] net: add individual virtual device filtering
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: regulator: add LS2 load switch documentation
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] Revert "dma-contiguous: do not allocate a single page from CMA area"
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH] Revert "dma-contiguous: do not allocate a single page from CMA area"
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 4/8] PCI: rockchip: fix a leaked reference by adding missing of_node_put
- From: Wen Yang <wen.yang99@xxxxxxxxxx>
- [PATCH 2/8] PCI: uniphier: fix a leaked reference by adding missing of_node_put
- From: Wen Yang <wen.yang99@xxxxxxxxxx>
- [PATCH 6/8] PCI: iproc: fix a leaked reference by adding missing of_node_put
- From: Wen Yang <wen.yang99@xxxxxxxxxx>
- [PATCH 8/8] PCI: rpadlpar: fix a leaked reference by adding missing of_node_put
- From: Wen Yang <wen.yang99@xxxxxxxxxx>
- [PATCH 7/8] PCI: mediatek: fix a leaked reference by adding missing of_node_put
- From: Wen Yang <wen.yang99@xxxxxxxxxx>
- [PATCH 5/8] PCI: aardvark: fix a leaked reference by adding missing of_node_put
- From: Wen Yang <wen.yang99@xxxxxxxxxx>
- [PATCH 3/8] PCI: dwc: layerscape: fix a leaked reference by adding missing of_node_put
- From: Wen Yang <wen.yang99@xxxxxxxxxx>
- [PATCH 1/8] PCI: dwc: pci-dra7xx: fix a leaked reference by adding missing of_node_put
- From: Wen Yang <wen.yang99@xxxxxxxxxx>
- Re: [PATCH] Revert "dma-contiguous: do not allocate a single page from CMA area"
- From: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
- Re: [PATCH] Revert "dma-contiguous: do not allocate a single page from CMA area"
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] Revert "dma-contiguous: do not allocate a single page from CMA area"
- From: Robin Murphy <robin.murphy@xxxxxxx>
- [PATCH] Revert "dma-contiguous: do not allocate a single page from CMA area"
- From: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
- Re: Regression in Linux next with dma cma changes
- From: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
- Regression in Linux next with dma cma changes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH net-next 0/6] net: add individual virtual device filtering
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 1/6] net: core: dev_addr_lists: add VID to device address
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 2/6] net: 8021q: vlan_dev: add vid tag to addresses of uc and mc lists
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 4/6] ethernet: eth: add default vid len for all ehternet kind devices
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 5/6] net: ethernet: ti: cpsw: update mc filtering to use IVDF
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 6/6] net: ethernet: ti: cpsw: add macvlan and ucast/vlan filtering support
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH net-next 3/6] net: 8021q: vlan_dev: add vid tag for vlan device own address
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- [PATCH 0/2] Fixes for command errors during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH 1/2] mmc: sdhci: Add platform_cmd_err() to sdhci_ops
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH 2/4] bus: ti-sysc: Add support for PRUSS SYSC type
- From: Roger Quadros <rogerq@xxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Ming Lei <ming.lei@xxxxxxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Ming Lei <tom.leiming@xxxxxxxxx>
- Re: [PATCH 2/4] bus: ti-sysc: Add support for PRUSS SYSC type
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/4] bus: ti-sysc: Add support for PRUSS SYSC type
- From: Suman Anna <s-anna@xxxxxx>
- Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Merlijn Wajer <merlijn@xxxxxxxxxx>
- Re: [PATCH 0/4] clk: ti: get rid of CLK_IS_BASIC
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: remove block layer bounce buffering for MMC v2
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH 0/4] clk: ti: get rid of CLK_IS_BASIC
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH v2 1/2] dt-bindings: regulator: add LS2 load switch documentation
- From: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
- [PATCH v2 0/2] regulator: tps65218: support LS2
- From: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
- [PATCH v2 2/2] regulator: tps65218: add support for LS2
- From: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
- [PATCH AUTOSEL 4.20 19/72] clk: ti: Fix error handling in ti_clk_parse_divider_data()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 16/65] clk: ti: Fix error handling in ti_clk_parse_divider_data()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH] mfd: twl-core: disable irq while suspended
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 00/12] add missing of_node_put after of_device_is_available
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [PATCH 06/12] omapfb: add missing of_node_put after of_device_is_available
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [PATCH 11/12] ARM: OMAP2+: add missing of_node_put after of_device_is_available
- From: Julia Lawall <Julia.Lawall@xxxxxxx>
- [PATCH] mfd: twl-core: disable irq while suspended
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] deprecate old cpsw driver phy mode for v5.1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] deprecate old cpsw driver phy mode for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH 0/4] clk: ti: get rid of CLK_IS_BASIC
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- [GIT PULL] deprecate old cpsw driver phy mode for v5.1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] dts changes for cpsw phy driver for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL] two am335x ethernet phy mode fixes for v5.0-rc cycle
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2] regulator: tps65218: Add support for LS2
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v2] regulator: tps65218: Add support for LS2
- From: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] clk: clk-twl6040: Fix imprecise external abort for pdmclk
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [GIT PULL] clk: ti: updates for v5.1
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] phy: phy-twl4030-usb: fix denied runtime access
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2] phy: phy-twl4030-usb: fix denied runtime access
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2] phy: phy-twl4030-usb: fix denied runtime access
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] dts changes for cpsw phy driver for v5.1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] two am335x ethernet phy mode fixes for v5.0-rc cycle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] phy: phy-twl4030-usb: fix denied runtime access
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH 6/6] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: da850 dt cpufreq support
- From: Christophe Aeschlimann <c.aeschlimann@xxxxxxxxxxxx>
- Re: [PATCH 6/6] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v2] phy: phy-twl4030-usb: fix denied runtime access
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/6] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/6] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH 6/6] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/6] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: da850 dt cpufreq support
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 3/3] regulator: tps65218: Add support for LS2
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 1/3] regulator: tps65218.c: fix LS3 issues
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 6/6] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: da850 dt cpufreq support
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: [PATCH 0/6] ARM: dts: ti: cpsw: switch to phy-gmii-sel phy driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: da850 dt cpufreq support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- da850 dt cpufreq support
- From: Christophe Aeschlimann <c.aeschlimann@xxxxxxxxxxxx>
- [PATCH 0/6] ARM: dts: ti: cpsw: switch to phy-gmii-sel phy driver
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 3/6] ARM: dts: am4372: switch to use phy-gmii-sel
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 1/6] ARM: dts: dra7: switch to use phy-gmii-sel
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 5/6] dt-bindings: net: ti: deprecate cpsw-phy-sel bindings
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 6/6] net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 4/6] ARM: dts: am335x: switch to use phy-gmii-sel
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 2/6] ARM: dts: dm814x: switch to use phy-gmii-sel
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 1/3] regulator: tps65218.c: fix LS3 issues
- From: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
- [PATCH 2/3] dt-bindings: regulator: Add LS2 load switch
- From: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
- [PATCH 3/3] regulator: tps65218: Add support for LS2
- From: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
- [PATCH 0/3] regulator: tps65218: Fix LS3 and add LS2
- From: Christian Hohnstaedt <Christian.Hohnstaedt@xxxxxxxx>
- Re: [PATCH] arm/mach-omap2/display: fix possible object reference leak
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] arm/mach-omap2/display: fix possible object reference leak
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [PATCH] arm/mach-omap2/display: fix possible object reference leak
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [PATCH] arm/mach-omap2/display: fix possible object reference leak
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 02/14] ARM: dts: IGEP: Add WiLink UART node
- From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 09/14] dt-binding: remoteproc: Add binding doc for PRU Cores in the PRU-ICSS
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 03/14] dt-binding: irqchip: Add pruss-intc-irq driver for PRUSS interrupts
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/2] ARM: dts: am335x-evm/evmsk: Fix PHY mode for ethernet
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 2/2] ARM: dts: am335x-evm: Fix PHY mode for ethernet
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- [PATCH 1/2] ARM: dts: am335x-evmsk: Fix PHY mode for ethernet
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Linux-next 20190218: am57xx-evm: mmc1: ADMA error
- From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH 2/2] regulator: twl6030: Constify regulator_ops
- From: Axel Lin <axel.lin@xxxxxxxxxx>
- [PATCH 1/2] regulator: twl6030: Use regulator_list_voltage_linear_range for twl6030ldo_ops
- From: Axel Lin <axel.lin@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] clk: ti: get rid of CLK_IS_BASIC
- From: Tero Kristo <t-kristo@xxxxxx>
- Re: [PATCH v3 0/3] mach-omap2: handle autoidle denial
- From: Tero Kristo <t-kristo@xxxxxx>
- [GIT PULL] clk: ti: updates for v5.1
- From: Tero Kristo <t-kristo@xxxxxx>
- [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 2/8] mmc: sdhci: add support for using external DMA devices
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 4/8] mmc: sdhci-omap: Add using external dma
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 6/8] mmc: sdhci-omap: Add DISABLE_DTO_FOR_ERASE Quirk
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 5/8] mmc: sdhci: Add quirk for disabling DTO during erase command
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 8/8] mmc: sdhci-omap: Add am335x and am437x specific compatibles
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 7/8] dt-bindings: sdhci-omap: Add am335x and am437x specific bindings
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- [PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap
- From: Faiz Abbas <faiz_abbas@xxxxxx>
- Re: [GIT PULL 2/2] more dts changes for omaps for v5.1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL 2/2] more dts changes for omaps for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL] Fix omap4 and later lost cpu1 interrupts for periodic timer
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL 2/2] more dts changes for omaps for v5.1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL 1/2] defconfig changes for omaps for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
- Re: [GIT PULL 2/2] more dts changes for omaps for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL 2/2] more dts changes for omaps for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [GIT PULL 3/3] dts changes for omaps for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL 2/3] dts changes for ti81xx for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [GIT PULL 1/3] soc changes for ti81xx for v5.1
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Merlijn Wajer <merlijn@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [GIT PULL] omap soc regression fixes for v5.0-rc cycle
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v2 00/15] PCI: endpoint: Cleanup EPC features
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
- Re: [PATCH v2 08/15] PCI: endpoint: Fix pci_epf_alloc_space to set correct MEM TYPE flags
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v2 08/15] PCI: endpoint: Fix pci_epf_alloc_space to set correct MEM TYPE flags
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Attn:
- From: Mateusz Lipka <Mateusz.Lipka@xxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Suman Anna <s-anna@xxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- [GIT PULL 2/2] more dts changes for omaps for v5.1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL 1/2] defconfig changes for omaps for v5.1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [GIT PULL] Fix omap4 and later lost cpu1 interrupts for periodic timer
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 08/15] PCI: endpoint: Fix pci_epf_alloc_space to set correct MEM TYPE flags
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
- [PATCHv2] mfd: twl6040: Fix device init errors for ACCCTL register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] mfd: twl6040: Fix device init errors for ACCCTL register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [RFC PATCH net-next 2/5] net: 8021q: vlan_dev: add vid tag for uc and mc address lists
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Merlijn Wajer <merlijn@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Merlijn Wajer <merlijn@xxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH 11/15] PCI: pci-epf-test: Use pci_epc_get_features to get EPC features
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [RFC PATCH net-next 2/5] net: 8021q: vlan_dev: add vid tag for uc and mc address lists
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PATCH v2 10/14] remoteproc/pru: Add PRU remoteproc driver
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH 01/16] remoteproc: Extend rproc_da_to_va() API with a flags parameter
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 03/14] dt-binding: irqchip: Add pruss-intc-irq driver for PRUSS interrupts
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 10/14] remoteproc/pru: Add PRU remoteproc driver
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 06/14] remoteproc: add page lookup for TI PRU to ELF loader
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Suman Anna <s-anna@xxxxxx>
- Re: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Suman Anna <s-anna@xxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Adam Ford <aford173@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH] clk: clk-twl6040: Fix imprecise external abort for pdmclk
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] clk: clk-twl6040: Fix imprecise external abort for pdmclk
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [RFC PATCH net-next 2/5] net: 8021q: vlan_dev: add vid tag for uc and mc address lists
- From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Paweł Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [Letux-kernel] [PATCH] ARM: dts: omap3-gta04: declare backlight in lcd node
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 11/15] PCI: pci-epf-test: Use pci_epc_get_features to get EPC features
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
- Re: [PATCH v2 08/15] PCI: endpoint: Fix pci_epf_alloc_space to set correct MEM TYPE flags
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 11/15] PCI: pci-epf-test: Use pci_epc_get_features to get EPC features
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH 11/15] PCI: pci-epf-test: Use pci_epc_get_features to get EPC features
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH] fbdev: omap2: fix warnings in dss core
- From: Anders Roxell <anders.roxell@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH] arm/mach-omap2/display: fix possible object reference leak
- From: Peng Hao <peng.hao2@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH AUTOSEL 4.19 07/83] mfd: twl-core: Fix section annotations on {,un}protect_pm_master
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.19 18/83] mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 03/34] mfd: twl-core: Fix section annotations on {,un}protect_pm_master
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.14 10/34] mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.9 02/21] mfd: twl-core: Fix section annotations on {,un}protect_pm_master
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 4.4 02/16] mfd: twl-core: Fix section annotations on {,un}protect_pm_master
- From: Sasha Levin <sashal@xxxxxxxxxx>
- [PATCH AUTOSEL 3.18 02/14] mfd: twl-core: Fix section annotations on {,un}protect_pm_master
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Philipp Rossak <embed3d@xxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am335x: Add support for Bosch Guardian
- From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: am335x: Add support for Bosch Guardian
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 06/14] mmc: omap: handle highmem pages
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 11/15] PCI: pci-epf-test: Use pci_epc_get_features to get EPC features
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
- Re: [PATCH] clk: clk-twl6040: Fix imprecise external abort for pdmclk
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH 1/3] clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH] mfd: twl6040: Fix device init errors for ACCCTL register
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- remove block layer bounce buffering for MMC v2
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 07/14] mmc: omap: handle chained sglists
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 06/14] mmc: omap: handle highmem pages
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 05/14] mmc: moxart: handle highmem pages
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 02/14] mmc: remove the unused use_blk_mq field from struct mmc_host
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 03/14] mmc: add a need_kmap flag to struct mmc_host
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 08/14] mmc: s3cmci: handle highmem pages
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 09/14] mmc: s3cmci: handle chained sglists
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 11/14] mmc: sh_mmcif: handle highmem pages
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 14/14] dma-mapping: remove dma_max_pfn
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 12/14] mmc: sh_mmcif: handle chained sglists
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 13/14] mmc: core: don't use block layer bounce buffers
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 10/14] mmc: mvsdio: handle highmem pages
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 04/14] mmc: davinci: handle highmem pages
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH 01/14] scatterlist: add sg_kmap_atomic / sg_kunmap_atomic helpers
- From: Christoph Hellwig <hch@xxxxxx>
- [PATCH] clk: clk-twl6040: Fix imprecise external abort for pdmclk
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] mfd: twl6040: Fix device init errors for ACCCTL register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCs
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [Letux-kernel] [PATCH] ARM: dts: omap3-gta04: declare backlight in lcd node
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v2 08/15] PCI: endpoint: Fix pci_epf_alloc_space to set correct MEM TYPE flags
- From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
- [PATCH] ARM: dts: omap3-gta04: declare backlight in lcd node
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v2 00/15] PCI: endpoint: Cleanup EPC features
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH] ARM: dts: am335x: Add support for Bosch Guardian
- From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] bus: ti-sysc: Add support for PRUSS SYSC type
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 00/15] PCI: endpoint: Cleanup EPC features
- From: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
- Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCs
- From: Vignesh R <vigneshr@xxxxxx>
- Re: [PATCH v3 0/3] mach-omap2: handle autoidle denial
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [RFC PATCH 4/4] i2c: core: introduce master_xfer_irqless callback
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] fbdev: omap2: no need to check return value of debugfs_create functions
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- Re: [PATCH] fbdev: Use of_node_name_eq for node name comparisons
- From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
- Re: [PATCHv2] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Droid 4 modem support in kernel & ofono
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCHv2] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: Droid 4 modem support in kernel & ofono
- From: Pavel Machek <pavel@xxxxxx>
- Re: [PATCH v3 2/2] arm: dts: gta04: add gps support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] arm: dts: gta04: add pinctrl settings for wkup domain
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: dts: omap3-gta04a5: Replace LXR reference with a local one
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH RFC] ARM: omap2: fix lack of timer interrupts on CPU1 after hotplug
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCHv2] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH RFC] ARM: omap2: fix lack of timer interrupts on CPU1 after hotplug
- From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- [PATCH 2/2] cpufreq: OMAP: Register an Energy Model
- From: Yangtao Li <tiny.windzz@xxxxxxxxx>
- Re: [PATCH v2] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] omap3: give off mode enable a more prominent place
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 00/24] Add support for PCIe RC and EP mode in TI's AM654 SoC
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH] PM/runtime: Optimize pm_runtime_autosuspend_expiration()
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: upstream OMAP5 Pyra support
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- Re: upstream OMAP5 Pyra support
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- upstream OMAP5 Pyra support
- From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
- [PATCH v2] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] omap3: give off mode enable a more prominent place
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH 1/2] ARM: multi_v7_defconfig: Update for dropped options
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Murali Karicheri <m-karicheri2@xxxxxx>
- Re: [PATCH 1/2] ARM: multi_v7_defconfig: Update for dropped options
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Murali Karicheri <m-karicheri2@xxxxxx>
- Re: [PATCH v2 ] PM-runtime: fix deadlock with ktime
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2 ] PM-runtime: fix deadlock with ktime
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH] i2c: cbus-gpio: Switch to use GPIO descriptors
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] MMC: OMAP: fix the maximum timeout setting
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
- Re: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Marc Zyngier <marc.zyngier@xxxxxxx>
- Re: [PATCH 2/2] ARM: multi_v7_defconfig: Update for moved options
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: multi_v7_defconfig: Update for dropped options
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 01/14] dt-bindings: remoteproc: Add TI PRUSS bindings
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts
- From: Roger Quadros <rogerq@xxxxxx>
- Re: [PATCH 2/2] ARM: multi_v7_defconfig: Update for moved options
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: multi_v7_defconfig: Update for dropped options
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Vignesh R <vigneshr@xxxxxx>
- [PATCH 2/2] ARM: multi_v7_defconfig: Update for moved options
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] ARM: multi_v7_defconfig: Update for dropped options
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] ARM: omap2plus_defconfig: Update for moved options
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] ARM: omap2plus_defconfig: Update for dropped options
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]