[PATCH 3/4] ARM: dts: imx6qdl: Use new CODEC reset pin name

["Andrew F. Davis" <afd@xxxxxx>]

The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
 arch/arm/boot/dts/imx6qdl-var-dart.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
index 8752a4961c47..c41cac502bac 100644
--- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
@@ -183,7 +183,7 @@
 		IOVDD-supply = <&reg_3p3v>;
 		DVDD-supply = <&reg_3p3v>;
 		ai3x-ocmv = <0>;
-		gpio-reset = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
 	};
 };
 
-- 
2.21.0