[PATCH] arch: arm: Kconfig: pedantic formatting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@xxxxxxxxx>
---
 arch/arm/Kconfig              | 24 +++++++++++-----------
 arch/arm/mach-aspeed/Kconfig  | 10 ++++-----
 arch/arm/mach-ep93xx/Kconfig  |  8 ++++----
 arch/arm/mach-hisi/Kconfig    | 14 ++++++-------
 arch/arm/mach-ixp4xx/Kconfig  | 32 ++++++++++++++---------------
 arch/arm/mach-mmp/Kconfig     |  2 +-
 arch/arm/mach-omap1/Kconfig   | 36 ++++++++++++++++----------------
 arch/arm/mach-omap2/Kconfig   | 12 +++++------
 arch/arm/mach-prima2/Kconfig  |  6 +++---
 arch/arm/mach-s3c24xx/Kconfig | 32 ++++++++++++++---------------
 arch/arm/mach-s3c64xx/Kconfig | 16 +++++++--------
 arch/arm/mach-sa1100/Kconfig  |  4 ++--
 arch/arm/mach-vt8500/Kconfig  |  6 +++---
 arch/arm/mach-w90x900/Kconfig |  6 +++---
 arch/arm/mm/Kconfig           | 48 +++++++++++++++++++++----------------------
 arch/arm/plat-samsung/Kconfig | 26 +++++++++++------------
 16 files changed, 140 insertions(+), 142 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5085a1e..c89f683 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1115,14 +1115,14 @@ config ARM_ERRATA_764369
 	  in the diagnostic control register of the SCU.
 
 config ARM_ERRATA_775420
-       bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
-       depends on CPU_V7
-       help
-	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
-	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
-	 operation aborts with MMU exception, it might cause the processor
-	 to deadlock. This workaround puts DSB before executing ISB if
-	 an abort may occur on cache maintenance.
+	bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+	  r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	  operation aborts with MMU exception, it might cause the processor
+	  to deadlock. This workaround puts DSB before executing ISB if
+	  an abort may occur on cache maintenance.
 
 config ARM_ERRATA_798181
 	bool "ARM errata: TLBI/DSB failure on Cortex-A15"
@@ -1650,12 +1650,12 @@ config HW_PERF_EVENTS
 	depends on ARM_PMU
 
 config SYS_SUPPORTS_HUGETLBFS
-       def_bool y
-       depends on ARM_LPAE
+	def_bool y
+	depends on ARM_LPAE
 
 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
-       def_bool y
-       depends on ARM_LPAE
+	def_bool y
+	depends on ARM_LPAE
 
 config ARCH_WANT_GENERAL_HUGETLB
 	def_bool y
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index 2d5570e..f6eaf05 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -18,9 +18,9 @@ config MACH_ASPEED_G4
 	select CPU_ARM926T
 	select PINCTRL_ASPEED_G4
 	help
-	 Say yes if you intend to run on an Aspeed ast2400 or similar
-	 fourth generation BMCs, such as those used by OpenPower Power8
-	 systems.
+	  Say yes if you intend to run on an Aspeed ast2400 or similar
+	  fourth generation BMCs, such as those used by OpenPower Power8
+	  systems.
 
 config MACH_ASPEED_G5
 	bool "Aspeed SoC 5th Generation"
@@ -28,7 +28,7 @@ config MACH_ASPEED_G5
 	select CPU_V6
 	select PINCTRL_ASPEED_G5
 	help
-	 Say yes if you intend to run on an Aspeed ast2500 or similar
-	 fifth generation Aspeed BMCs.
+	  Say yes if you intend to run on an Aspeed ast2500 or similar
+	  fifth generation Aspeed BMCs.
 
 endif
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index c095236..597ea24 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -125,10 +125,10 @@ config MACH_MICRO9S
 	  Contec Micro9-Slim board.
 
 config MACH_SIM_ONE
-        bool "Support Simplemachines Sim.One board"
-        help
-          Say 'Y' here if you want your kernel to support the
-          Simplemachines Sim.One board.
+	bool "Support Simplemachines Sim.One board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Simplemachines Sim.One board.
 
 config MACH_SNAPPER_CL15
 	bool "Support Bluewater Systems Snapper CL15 Module"
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 65a048f..4850f8b 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -24,13 +24,13 @@ config ARCH_HI3xxx
 	  Support for Hisilicon Hi36xx SoC family
 
 config ARCH_HIP01
-       bool "Hisilicon HIP01 family"
-       depends on ARCH_MULTI_V7
-       select HAVE_ARM_SCU if SMP
-       select HAVE_ARM_TWD if SMP
-       select ARM_GLOBAL_TIMER
-       help
-         Support for Hisilicon HIP01 SoC family
+	bool "Hisilicon HIP01 family"
+	depends on ARCH_MULTI_V7
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select ARM_GLOBAL_TIMER
+	help
+	  Support for Hisilicon HIP01 SoC family
 
 config ARCH_HIP04
 	bool "Hisilicon HiP04 Cortex A15 family"
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index fea00812..7b47a3c 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -22,9 +22,9 @@ config MACH_AVILA
 	  see <file:Documentation/arm/IXP4xx>.
 
 config MACH_LOFT
-    bool "Loft"
-    depends on MACH_AVILA
-    help
+	bool "Loft"
+	depends on MACH_AVILA
+	help
 	  Say 'Y' here if you want your kernel to support the Giant
 	  Shoulder Inc Loft board (a minor variation on the standard
 	  Gateworks Avila Network Platform).
@@ -33,7 +33,7 @@ config ARCH_ADI_COYOTE
 	bool "Coyote"
 	select FORCE_PCI
 	help
-	  Say 'Y' here if you want your kernel to support the ADI 
+	  Say 'Y' here if you want your kernel to support the ADI
 	  Engineering Coyote Gateway Reference Platform. For more
 	  information on this platform, see <file:Documentation/arm/IXP4xx>.
 
@@ -56,8 +56,8 @@ config MACH_WG302V2
 config ARCH_IXDP425
 	bool "IXDP425"
 	help
-	  Say 'Y' here if you want your kernel to support Intel's 
-	  IXDP425 Development Platform (Also known as Richfield).  
+	  Say 'Y' here if you want your kernel to support Intel's
+	  IXDP425 Development Platform (Also known as Richfield).
 	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
 config MACH_IXDPG425
@@ -88,12 +88,12 @@ config MACH_KIXRP435
 	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 
 #
-# IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
-# number from the bootloader due to marketing monkeys, so we just enable it 
+# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
+# number from the bootloader due to marketing monkeys, so we just enable it
 # by default if IXDP425 is enabled.
 #
 config ARCH_IXCDP1100
-	bool 
+	bool
 	depends on ARCH_IXDP425
 	default y
 
@@ -200,14 +200,14 @@ config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
 	depends on PCI
 	help
-          IXP4xx provides two methods of accessing PCI memory space:
+	  IXP4xx provides two methods of accessing PCI memory space:
 
-          1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
-             To access PCI via this space, we simply ioremap() the BAR
-             into the kernel and we can use the standard read[bwl]/write[bwl]
-             macros. This is the preferred method due to speed but it
-             limits the system to just 64MB of PCI memory. This can be
-             problematic if using video cards and other memory-heavy devices.
+	  1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
+	     To access PCI via this space, we simply ioremap() the BAR
+	     into the kernel and we can use the standard read[bwl]/write[bwl]
+	     macros. This is the preferred method due to speed but it
+	     limits the system to just 64MB of PCI memory. This can be
+	     problematic if using video cards and other memory-heavy devices.
 
 	  2) If > 64MB of memory space is required, the IXP4xx can be
 	     configured to use indirect registers to access the whole PCI
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 94500be..144036e 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -149,7 +149,7 @@ config CPU_MMP2
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 
 config USB_EHCI_MV_U2O
-        bool "EHCI support for PXA USB OTG controller"
+	bool "EHCI support for PXA USB OTG controller"
 	depends on USB_EHCI_MV
 	help
 	  Enables support for OTG controller which can be switched to host mode.
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index c4694f2..2e7d733 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -55,7 +55,7 @@ config OMAP_MUX_WARNINGS
 	default y
 	help
 	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup.	 When there are no warnings
+	  to change the pin multiplexing setup. When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
 comment "OMAP Board Type"
@@ -65,20 +65,20 @@ config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
-          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
-          have such a board.
+	  TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+	  have such a board.
 
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
@@ -91,14 +91,14 @@ config MACH_HERALD
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
-          if you have such a board.
+	  if you have such a board.
 
 config OMAP_OSK_MISTRAL
 	bool "Mistral QVGA board Support"
 	depends on MACH_OMAP_OSK
-    	help
+	help
 	  The OSK supports an optional add-on board with a Quarter-VGA
 	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
 	  and camera connector.  Say Y here if you have this board.
@@ -106,14 +106,14 @@ config OMAP_OSK_MISTRAL
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
 	depends on ARCH_OMAP1 && ARCH_OMAP730
-    	help
+	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_FSAMPLE
 	bool "TI F-Sample"
 	depends on ARCH_OMAP1 && ARCH_OMAP730
-    	help
+	help
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
 
@@ -130,10 +130,10 @@ config MACH_OMAP_PALMZ71
 	bool "Palm Zire71"
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
 	help
-	 Support for the Palm Zire71 PDA. To boot the kernel,
-	 you'll need a PalmOS compatible bootloader; check out
-	 http://hackndev.com/palm/z71 for more information.
-	 Say Y here if you have such a PDA, say N otherwise.
+	  Support for the Palm Zire71 PDA. To boot the kernel,
+	  you'll need a PalmOS compatible bootloader; check out
+	  http://hackndev.com/palm/z71 for more information.
+	  Say Y here if you have such a PDA, say N otherwise.
 
 config MACH_OMAP_PALMTT
 	bool "Palm Tungsten|T"
@@ -179,10 +179,10 @@ config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
 	help
-          Support for generic OMAP-1510, 1610 or 1710 board with
-          no FPGA. Can be used as template for porting Linux to
-          custom OMAP boards. Say Y here if you have a custom
-          board.
+	  Support for generic OMAP-1510, 1610 or 1710 board with
+	  no FPGA. Can be used as template for porting Linux to
+	  custom OMAP boards. Say Y here if you have a custom
+	  board.
 
 endmenu
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5e33d1a..4db9516d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -174,16 +174,16 @@ config SOC_TI81XX
 	default y
 
 config OMAP_PACKAGE_CBC
-       bool
+	bool
 
 config OMAP_PACKAGE_CBB
-       bool
+	bool
 
 config OMAP_PACKAGE_CUS
-       bool
+	bool
 
 config OMAP_PACKAGE_CBP
-       bool
+	bool
 
 comment "OMAP Legacy Platform Data Board Type"
 	depends on ARCH_OMAP2PLUS
@@ -208,10 +208,10 @@ config MACH_OMAP3_PANDORA
 	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N810
-       bool
+	bool
 
 config MACH_NOKIA_N810_WIMAX
-       bool
+	bool
 
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 7426211..458c02f 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -21,7 +21,7 @@ config ARCH_ATLAS6
 	default y
 	select SIRF_IRQ
 	help
-          Support for CSR SiRFSoC ARM Cortex A9 Platform
+	  Support for CSR SiRFSoC ARM Cortex A9 Platform
 
 config ARCH_ATLAS7
 	bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform"
@@ -31,7 +31,7 @@ config ARCH_ATLAS7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	help
-          Support for CSR SiRFSoC ARM Cortex A7 Platform
+	  Support for CSR SiRFSoC ARM Cortex A7 Platform
 
 config ARCH_PRIMA2
 	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
@@ -40,7 +40,7 @@ config ARCH_PRIMA2
 	select ZONE_DMA
 	select PRIMA2_TIMER
 	help
-          Support for CSR SiRFSoC ARM Cortex A9 Platform
+	  Support for CSR SiRFSoC ARM Cortex A9 Platform
 
 config SIRF_IRQ
 	bool
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 686f0bb..bcc6ce4 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -17,8 +17,6 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
-
-
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -138,11 +136,11 @@ config S3C2410_IOTIMING
 	  and s3c2440/s3c2442 cpu frequency support.
 
 config S3C2410_CPUFREQ_UTILS
-       bool
-       depends on ARM_S3C24XX_CPUFREQ
-       help
-         Internal node to select timing code that is common to the s3c2410
-         and s3c2440/s3c244 cpu frequency support.
+	bool
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Internal node to select timing code that is common to the s3c2410
+	  and s3c2440/s3c244 cpu frequency support.
 
 # cpu frequency support common to s3c2412, s3c2413 and s3c2442
 
@@ -280,7 +278,7 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
-endif	# CPU_S3C2410
+endif # CPU_S3C2410
 
 config S3C2412_PM_SLEEP
 	bool
@@ -354,7 +352,7 @@ config MACH_VSTMS
 	help
 	  Say Y here if you are using an VSTMS board
 
-endif	# CPU_S3C2412
+endif # CPU_S3C2412
 
 if CPU_S3C2416
 
@@ -402,7 +400,7 @@ config MACH_S3C2416_DT
 	  Note: This is under development and not all peripherals can be supported
 	  with this machine file.
 
-endif	# CPU_S3C2416
+endif # CPU_S3C2416
 
 if CPU_S3C2440 || CPU_S3C2442
 
@@ -528,7 +526,7 @@ config SMDK2440_CPU2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 
-endif	# CPU_S3C2440
+endif # CPU_S3C2440
 
 if CPU_S3C2442
 
@@ -548,7 +546,7 @@ config MACH_NEO1973_GTA02
 	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
 config MACH_RX1950
 	bool "HP iPAQ rx1950"
@@ -560,9 +558,9 @@ config MACH_RX1950
 	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
-	   Say Y here if you're using HP iPAQ rx1950
+	  Say Y here if you're using HP iPAQ rx1950
 
-endif	# CPU_S3C2442
+endif # CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
@@ -571,7 +569,7 @@ config S3C2443_SETUP_SPI
 	help
 	  Common setup code for SPI GPIO configurations
 
-endif	# CPU_S3C2443 || CPU_S3C2416
+endif # CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
 
@@ -584,7 +582,7 @@ config MACH_SMDK2443
 	help
 	  Say Y here if you are using an SMDK2443
 
-endif	# CPU_S3C2443
+endif # CPU_S3C2443
 
 config PM_H1940
 	bool
@@ -593,4 +591,4 @@ config PM_H1940
 
 endmenu	# SAMSUNG S3C24XX SoCs Support
 
-endif	# ARCH_S3C24XX
+endif # ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 5700822..f6b05277 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -100,7 +100,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
 config S3C64XX_SETUP_SPI
 	bool
 	help
-	 Common setup code for SPI GPIO configurations
+	  Common setup code for SPI GPIO configurations
 
 config S3C64XX_SETUP_USB_PHY
 	bool
@@ -110,7 +110,7 @@ config S3C64XX_SETUP_USB_PHY
 # S36400 Macchine support
 
 config MACH_SMDK6400
-       bool "SMDK6400"
+	bool "SMDK6400"
 	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
@@ -202,7 +202,7 @@ config SMDK6410_SD_CH0
 	bool "Use channel 0 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
+	  Select CON7 (channel 0) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -211,7 +211,7 @@ config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
+	  Select CON6 (channel 1) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -257,7 +257,7 @@ config MACH_NCP
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	help
-          Machine support for the Samsung NCP
+	  Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
@@ -289,21 +289,21 @@ config MACH_SMARTQ
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	help
-	    Shared machine support for SmartQ 5/7
+	  Shared machine support for SmartQ 5/7
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 5
+	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 7
+	  Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index ce41c67..b1c092c 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -91,8 +91,8 @@ config SA1100_JORNADA720
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
-	  handheld computer.  See 
-	  <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> 
+	  handheld computer.  See
+	  <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
 
 config SA1100_JORNADA720_SSP
 	bool "HP Jornada 720 Extended SSP driver"
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 8841199..6343961 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -10,9 +10,9 @@ config ARCH_VT8500
 
 config ARCH_WM8505
 	bool "VIA/Wondermedia 85xx and WM8650"
- 	depends on ARCH_MULTI_V5
- 	select ARCH_VT8500
- 	select CPU_ARM926T
+	depends on ARCH_MULTI_V5
+	select ARCH_VT8500
+	select CPU_ARM926T
 
 config ARCH_WM8750
 	bool "WonderMedia WM8750"
diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index b16ffc0..1fb3a3b 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -23,7 +23,7 @@ config MACH_W90P910EVB
 	default y
 	select CPU_W90P910
 	help
-	   Say Y here if you are using the Nuvoton W90P910EVB
+	  Say Y here if you are using the Nuvoton W90P910EVB
 
 endmenu
 
@@ -33,7 +33,7 @@ config MACH_W90P950EVB
 	bool "Nuvoton NUC950 Evaluation Board"
 	select CPU_NUC950
 	help
-	   Say Y here if you are using the Nuvoton NUC950EVB
+	  Say Y here if you are using the Nuvoton NUC950EVB
 
 endmenu
 
@@ -43,7 +43,7 @@ config MACH_W90N960EVB
 	bool "Nuvoton NUC960 Evaluation Board"
 	select CPU_NUC960
 	help
-	   Say Y here if you are using the Nuvoton NUC960EVB
+	  Say Y here if you are using the Nuvoton NUC960EVB
 
 endmenu
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index b169e58..23e75a1 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -123,13 +123,13 @@ config CPU_ARM925T
 	select CPU_PABRT_LEGACY
 	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
- 	help
- 	  The ARM925T is a mix between the ARM920T and ARM926T, but with
+	help
+	  The ARM925T is a mix between the ARM920T and ARM926T, but with
 	  different instruction and data caches. It is used in TI's OMAP
- 	  device family.
+	  device family.
 
- 	  Say Y if you want support for the ARM925T processor.
- 	  Otherwise, say N.
+	  Say Y if you want support for the ARM925T processor.
+	  Otherwise, say N.
 
 # ARM926T
 config CPU_ARM926T
@@ -829,19 +829,19 @@ config HARDEN_BRANCH_PREDICTOR
 	depends on CPU_SPECTRE
 	default y
 	help
-	   Speculation attacks against some high-performance processors rely
-	   on being able to manipulate the branch predictor for a victim
-	   context by executing aliasing branches in the attacker context.
-	   Such attacks can be partially mitigated against by clearing
-	   internal branch predictor state and limiting the prediction
-	   logic in some situations.
+	  Speculation attacks against some high-performance processors rely
+	  on being able to manipulate the branch predictor for a victim
+	  context by executing aliasing branches in the attacker context.
+	  Such attacks can be partially mitigated against by clearing
+	  internal branch predictor state and limiting the prediction
+	  logic in some situations.
 
-	   This config option will take CPU-specific actions to harden
-	   the branch predictor against aliasing attacks and may rely on
-	   specific instruction sequences or control bits being set by
-	   the system firmware.
+	  This config option will take CPU-specific actions to harden
+	  the branch predictor against aliasing attacks and may rely on
+	  specific instruction sequences or control bits being set by
+	  the system firmware.
 
-	   If unsure, say Y.
+	  If unsure, say Y.
 
 config TLS_REG_EMUL
 	bool
@@ -983,14 +983,14 @@ if CACHE_L2X0
 config PL310_ERRATA_588369
 	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
 	help
-	   The PL310 L2 cache controller implements three types of Clean &
-	   Invalidate maintenance operations: by Physical Address
-	   (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
-	   They are architecturally defined to behave as the execution of a
-	   clean operation followed immediately by an invalidate operation,
-	   both performing to the same memory location. This functionality
-	   is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0)
-	   as clean lines are not invalidated as a result of these operations.
+	  The PL310 L2 cache controller implements three types of Clean &
+	  Invalidate maintenance operations: by Physical Address
+	  (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
+	  They are architecturally defined to behave as the execution of a
+	  clean operation followed immediately by an invalidate operation,
+	  both performing to the same memory location. This functionality
+	  is not correctly implemented in PL310 prior to r2p0 (fixed in r2p0)
+	  as clean lines are not invalidated as a result of these operations.
 
 config PL310_ERRATA_727915
 	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 53da57f..1946c3d 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -39,12 +39,12 @@ config SAMSUNG_ATAGS
 	def_bool n
 	depends on ATAGS
 	help
-	   This option enables ATAGS based boot support code for
-	   Samsung platforms, including static platform devices, legacy
-	   clock, timer and interrupt initialization, etc.
+	  This option enables ATAGS based boot support code for
+	  Samsung platforms, including static platform devices, legacy
+	  clock, timer and interrupt initialization, etc.
 
-	   Platforms that support only DT based boot need not to select
-	   this option.
+	  Platforms that support only DT based boot need not to select
+	  this option.
 
 if SAMSUNG_ATAGS
 
@@ -98,7 +98,7 @@ config S3C_DEV_HSMMC3
 config S3C_DEV_HWMON
 	bool
 	help
-	    Compile in platform device definitions for HWMON
+	  Compile in platform device definitions for HWMON
 
 config S3C_DEV_I2C1
 	bool
@@ -202,7 +202,7 @@ config S3C64XX_DEV_SPI2
 config SAMSUNG_DEV_TS
 	bool
 	help
-	    Common in platform device definitions for touchscreen device
+	  Common in platform device definitions for touchscreen device
 
 config SAMSUNG_DEV_KEYPAD
 	bool
@@ -247,13 +247,13 @@ config SAMSUNG_PM_DEBUG
 	  for more information.
 
 config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
+	bool "SMDK LED suspend/resume debugging"
+	depends on PM && (MACH_SMDK6410)
+	help
+	  Say Y here to enable the use of the SMDK LEDs on the baseboard
+	  for debugging of the state of the suspend and resume process.
 
-	 Note, this currently only works for S3C64XX based SMDK boards.
+	  Note, this currently only works for S3C64XX based SMDK boards.
 
 config SAMSUNG_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
-- 
1.9.1




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux