Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH] OMAPDSS: Add missing dependency on backlight for DSI-CM panel drier
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/2] mmc: omap_hsmmc: Enable SDIO interrupt
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCH v3 4/5] dma: cppi41: only allocate descriptor memory once
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• RE: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH] OMAPDSS: Add missing dependency on backlight for DSI-CM panel drier
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: 3.12-rc1: no longer compiles for Nokia n900 (omap based), display no longer works
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 0/2] patches to enable SDIO interrupt support for omap_hsmmc for v3.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] mmc: omap_hsmmc: Enable SDIO interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] mmc: omap_hsmmc: Fix context save and restore for DT
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: OMAP2+: Use pdata quirks for wl12xx legacy init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: OMAP2: pdata-quirks: set internal clock source for MMC2 on N950/N9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• [PATCH 9/9] dts: boneblack: add pinmux and hdmi node to enable display
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 2/9] omap4: dts: Add node for DES3DES module
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 0/9] ARM: dts: DT data for OMAP platforms for v3.13
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 3/9] ARM: dts: Add SHAM data and documentation for AM33XX
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 8/9] ARM: dts: AM33XX: Add LCDC info into am335x-evm
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 7/9] ARM: am437x: dts: Add DES node for am437x
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 5/9] am33xx: dts: Fix AES interrupt number
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 4/9] ARM: dts: Add AES data and documentation for AM33XX
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 1/9] omap4: dts: Add node for AES
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 6/9] ARM: am437x: dts: Add AES node for am437x
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• RE: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH v6 4/4] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v6 3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v6 2/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v6 2/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: Booting recent mainline on omap5-uevm
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: Booting recent mainline on omap5-uevm
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Brian Norris <computersforpeace@xxxxxxxxx>
• Re: [PATCH] arm: Fix build error with context tracking calls
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
  • From: Balaji T K <balajitk@xxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: Booting recent mainline on omap5-uevm
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/4] usb: musb: am35x: use SIMPLE_DEV_PM_OPS
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCHv3 0/2] ARM: dts: Add initial support for IGEP AQUILA
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• [PATCH] OMAPDSS: Add missing dependency on backlight for DSI-CM panel drier
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
  • From: Pawel Moll <pawel.moll@xxxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCHv7 30/36] ARM: dts: omap3 clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 16/36] ARM: dts: dra7 clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 31/36] CLK: TI: add omap3 clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 36/36] CLK: TI: add am43xx clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 33/36] ARM: OMAP3: use DT clock init if DT data is available
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 35/36] ARM: dts: AM43xx: link in clock DT data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 32/36] ARM: dts: AM35xx: use DT clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 34/36] ARM: dts: am43xx clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 27/36] CLK: TI: add interface clock support for OMAP3
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 29/36] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 24/36] ARM: dts: am33xx clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 28/36] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 25/36] CLK: TI: add am33xx clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 21/36] CLK: TI: add dra7 clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 23/36] ARM: dts: DRA7: link in clock DT data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 12/36] ARM: OMAP4: remove old clock data and link in new clock init code
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 26/36] ARM: AM33xx: remove old clock data and link in new clock init code
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 20/36] CLK: TI: DRA7: Add APLL support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 22/36] ARM: OMAP: DRA7: Enable clock init
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 13/36] ARM: dts: omap5 clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 19/36] ARM: dts: DRA7: Add PCIe related clock nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 14/36] CLK: TI: add omap5 clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 17/36] ARM: dts: clk: Add apll related clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 18/36] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 08/36] ARM: dts: omap4 clock data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 15/36] CLK: TI: omap5: Initialize USB_DPLL at boot
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 11/36] CLK: TI: add omap4 clock init file
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 09/36] clk: ti: add mux-gate clock support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 10/36] clk: ti: add support for basic mux clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 05/36] clk: ti: add support for TI fixed factor clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 07/36] CLK: TI: add support for clockdomain binding
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 06/36] CLK: TI: add support for OMAP gate clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 01/36] CLK: TI: Add DPLL clock support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 04/36] CLK: ti: add support for ti divider-clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 03/36] CLK: TI: add autoidle support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 02/36] CLK: TI: add DT alias clock registration mechanism
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v3] Add support for Newflow NanoBone board
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: "Dr. H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: DSS display-new custom enable/disable hooks
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 06/10] ARM: shmobile: Initialize PWM backlight enable_gpio field
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 00/10] pwm-backlight: Add GPIO and power supply support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• OMAP baseline test results for v3.12-rc2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Rob Landley <rob@xxxxxxxxxxx>
• [PATCH 2/2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 1/2] gpio/omap: maintain GPIO and IRQ usage separately
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH 2/2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• RE: Booting recent mainline on omap5-uevm
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: Booting recent mainline on omap5-uevm
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: Booting recent mainline on omap5-uevm
  • From: Suman Anna <s-anna@xxxxxx>
• Re: Booting recent mainline on omap5-uevm
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Sebastian Reichel <sre@xxxxxxxx>
• RE: Booting recent mainline on omap5-uevm
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Booting recent mainline on omap5-uevm
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [RFCv2 3/3] ARM: dts: N900: Add SSI information
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• DSS display-new custom enable/disable hooks
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [RFCv2 3/3] ARM: dts: N900: Add SSI information
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v2 2/3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH v2 3/3] ARM: OMAP2: delete board-rm680
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH v2 1/3] ARM: OMAP2: pdata-quirks: set internal clock source for MMC2 on N950/N9
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH v2 0/3] ARM: OMAP: convert N950/N9 to DT
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes
  • From: "Gupta, Pekon" <pekon@xxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [RFC 10/15] scripts/dtc: add count limit on nodes
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 15/15] scripts/dtc: add verbose options
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 13/15] bindings: OMAP: add new schema files
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 14/15] scripts/dtc: validate dts against schema bindings
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 12/15] scripts/dtc: check constraints on parents
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 11/15] scripts/dtc: check for children nodes
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 09/15] scripts/dtc: check value of properties
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 08/15] scripts/dtc: check array size
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 07/15] scripts/dtc: can inherit properties
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 06/15] scripts/dtc: check for required properties
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 05/15] scripts/dtc: check type on properties
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 04/15] scripts/dtc: add procedure to handle dts errors
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 03/15] scripts/dtc: validate each nodes and properties
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 02/15] scripts/dtc: build schema index for dts validation
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 01/15] scripts/dtc: fix most memory leaks in dtc
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• [RFC 00/15] Device Tree schemas and validation
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] RX-51: ARM errata 430973 workaround
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [RFC v2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [RFC v2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [RFC v2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• panda, 3.11 and wifi: 'wlcore: ERROR timeout waiting for the hardware to complete initialization'
  • From: Paolo Pisati <p.pisati@xxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [net-next PATCH 0/4] cpsw: support for control module register
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] ARM: DTS: omap3-devkit8000.dts: fix a typo
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH 00/10] pwm-backlight: Add GPIO and power supply support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v3 02/10] usb: phy: generic: Don't use regulator framework for RESET line
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 01/10] usb: phy: generic: Add gpio_reset to platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 07/10] ARM: dts: omap5-uevm: Use reset-gpios for hsusb2/3_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 00/10] USB: phy: phy-nop: Manage RESET GPIO in the driver
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 06/10] ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 04/10] ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 08/10] ARM: dts: omap3-beagle: Make USB host pin naming consistent
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 03/10] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v3 10/10] ARM: dts: omap3-beagle: Add USB OTG PHY details
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH 00/10] pwm-backlight: Add GPIO and power supply support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [RFC v2] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Sricharan R <r.sricharan@xxxxxx>
• [PATCHv2] arm: dts: omap5: Add status parameter.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 1/4] usb: musb: am35x: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH] arm: dts: omap5-uevm: Add status parameter for i2c/spi/uart.
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] arm: dts: omap5-uevm: Add status parameter for i2c/spi/uart.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH] arm: dts: omap5-uevm: Add status parameter for i2c/spi/uart.
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• [PATCH] arm: dts: omap5-uevm: Add status parameter for i2c/spi/uart.
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd
  • From: Nishanth Menon <nm@xxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: new binutils needed for arm in 3.12-rc1
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] RX-51: ARM errata 430973 workaround
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Pavel Machek <pavel@xxxxxx>
• new binutils needed for arm in 3.12-rc1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFCv2 3/3] ARM: dts: N900: Add SSI information
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] dma: edma: Add support for Cyclic DMA
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 3/3] dma: edma: Increase maximum SG limit to 20
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 1/3] dma: edma: Split out PaRAM set calculations into its own function
  • From: Joel Fernandes <joelf@xxxxxx>
• [PATCH 0/3] dma: edma: Add cyclic DMA support
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH v5 1/3] usb: dwc3: msm: Add device tree binding information
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH 01/10] pwm-backlight: Refactor backlight power on/off
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 00/10] pwm-backlight: Add GPIO and power supply support
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 02/10] pwm-backlight: Add optional enable GPIO
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 03/10] ARM: OMAP: Initialize PWM backlight enable_gpio field
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 05/10] ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 04/10] ARM: pxa: Initialize PWM backlight enable_gpio field
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 06/10] ARM: shmobile: Initialize PWM backlight enable_gpio field
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 07/10] unicore32: Initialize PWM backlight enable_gpio field
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 08/10] pwm-backlight: Use new enable_gpio field
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 10/10] pwm-backlight: Allow backlight to remain disabled on boot
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 09/10] pwm-backlight: Use an optional power supply
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: am35x: use SIMPLE_DEV_PM_OPS
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [RFCv2 3/3] ARM: dts: N900: Add SSI information
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [PATCH v6 8/8] ARM: dts: omap5: update omap-control-usb node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 7/8] ARM: dts: omap4: update omap-control-usb nodes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DW PHY's
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v5 1/3] usb: dwc3: msm: Add device tree binding information
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 1/3] usb: dwc3: msm: Add device tree binding information
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 36/51] DMA-API: usb: use dma_set_coherent_mask()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v6] gpio: pcf857x: Add OF support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/9] usb: phy: nop: Don't use regulator framework for RESET line
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2: HACK: hardcode hsmmc2 input clock source for N950/N9
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2: HACK: hardcode hsmmc2 input clock source for N950/N9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v3 4/5] dma: cppi41: only allocate descriptor memory once
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 4/5] dma: cppi41: only allocate descriptor memory once
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] usb: musb: am335x: Do not remove the session bit HOST-only mode
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2] RX-51: Add missing max_current to rx51_lp5523_led_config
  • From: joerg Reisenweber <joerg@xxxxxxxxxxxx>
• Re: [PATCH v7 09/10] usb: dwc3: omap: manage "usb_otg_ss_refclk960m" clock
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] RX-51: Add missing max_current to rx51_lp5523_led_config
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 37/51] DMA-API: usb: use new dma_coerce_mask_and_coherent()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 36/51] DMA-API: usb: use dma_set_coherent_mask()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 43/51] DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 24/51] DMA-API: dma: pl330: add dma_set_mask_and_coherent() call
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 43/51] DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 23/51] DMA-API: dma: pl08x: add dma_set_mask_and_coherent() call
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 5/5] dma: cppi41: add support for suspend and resume
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 5/5] dma: cppi41: add support for suspend and resume
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [RFC PATCH 15/15] arm: dts: dra7: add sata node
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/5] OMAPDSS: DISPC: Fix assignment of 0/1 to bool variables
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] usb: dwc3: Remove additional delay of 100ms when resuming
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v3 5/5] dma: cppi41: add support for suspend and resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v3 4/5] dma: cppi41: only allocate descriptor memory once
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 3/5] dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe()
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 2/5] dma: cppi41: s/deinit_cpii41/deinit_cppi41/
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 1/5] dma: cppi41: pass around device instead of platform_device
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 5/5] dma: cppi41: add support for suspend and resume
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] usb: dwc3: Remove additional delay of 100ms when resuming
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• OMAP baseline test results for v3.12-rc1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v3] ARM: VExpress: Makefile: add armv7 flags for inline assmembly code compiling
  • From: Chen Gang <gang.chen@xxxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH 3/5] OMAPDSS: DISPC: Fix assignment of 0/1 to bool variables
  • From: Peter Senna Tschudin <peter.senna@xxxxxxxxx>
• Re: [RFC PATCH 15/15] arm: dts: dra7: add sata node
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: Fix build error with context tracking calls
  • From: Frederic Weisbecker <fweisbec@xxxxxxxxx>
• Re: [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH v2 3/4] usb: musb: omap2430: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v2 3/4] usb: musb: omap2430: use SIMPLE_DEV_PM_OPS
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/5] dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe()
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 2/5] dma: cppi41: s/deinit_cpii41/deinit_cppi41/
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 4/5] dma: cppi41: only allocate descriptor memory once
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 5/5] dma: cppi41: add support for suspend and resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 1/5] dma: cppi41: pass around device instead of platform_device
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 0/5] dma: cppi41: some trivial fixes and support for suspend/resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 4/4] usb: musb: ux500: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 2/4] usb: musb: blackfin: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 1/4] usb: musb: am35x: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 3/4] usb: musb: omap2430: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [RFC] gpio/omap: auto-setup a GPIO when used as an IRQ
  • From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] dma: cppi41: add support for suspend and resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v2 5/5] dma: cppi41: add support for suspend and resume
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] wilink: add device tree support
  • From: Sebastian Reichel <sre@xxxxxxxx>
• Re: [PATCH v2 0/9] wilink: add device tree support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 22/51] DMA-API: amba: get rid of separate dma_mask
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• [PATCH v2 2/5] dma: cppi41: s/deinit_cpii41/deinit_cppi41/
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 3/5] dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe()
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 4/5] dma: cppi41: only allocate descriptor memory once
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 5/5] dma: cppi41: add support for suspend and resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 1/5] dma: cppi41: pass around device instead of platform_device
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v2 0/5] dma: cppi41: some trivial fixes and support for suspend/resume
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH 2/4] usb: musb: blackfin: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH 4/4] usb: musb: ux500: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH 3/4] usb: musb: omap2430: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH 1/4] usb: musb: am35x: use SIMPLE_DEV_PM_OPS
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 24/51] DMA-API: dma: pl330: add dma_set_mask_and_coherent() call
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v6] gpio: pcf857x: Add OF support
  • From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] wilink: add device tree support
  • From: Sebastian Reichel <sre@xxxxxxxx>
• [PATCH 2/3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 0/3] ARM: OMAP: convert N950/N9 to DT
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 3/3] ARM: OMAP2: delete board-rm680
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH 1/3] ARM: OMAP2: HACK: hardcode hsmmc2 input clock source for N950/N9
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 0/4] Add support for charging battery in Nokia RX-51
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 0/9] wilink: add device tree support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] OMAP/serial: Fix division by zero exception on 3M+ baud rates
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] OMAP/serial: Fix Mode13 vs Mode16 priority
  • From: Alexey Pelykh <alexey.pelykh@xxxxxxxxx>
• [PATCH] OMAP/serial: Fix misnamed variable
  • From: Alexey Pelykh <alexey.pelykh@xxxxxxxxx>
• [PATCH] OMAP/serial: Fix division by zero exception on 3M+ baud rates
  • From: Alexey Pelykh <alexey.pelykh@xxxxxxxxx>
• [PATCH] ARM: DTS: omap3-devkit8000.dts: fix a typo
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH] ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [PATCH] ARM: dts: omap3-beagle-xm: enable pullup for dvi on twl_gpio
  • From: robertcnelson <robertcnelson@xxxxxxxxx>
• Re: [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [net-next PATCH 4/4] ARM: dts: am33xx: adopt to cpsw-phy-sel driver to configure phy mode
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 3/4] drivers: net: cpsw: use cpsw-phy-sel driver to configure phy mode
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 2/4] drivers: net: cpsw-phy-sel: Add new driver for phy mode selection for cpsw
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 1/4] net: ethernet: cpsw: switch to devres allocations
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [net-next PATCH 0/4] cpsw: support for control module register
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/3] omap2: Change clk dev id for rng to omap3-rom-rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] omap2: Change clk dev id for rng to omap3-rom-rng
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2 1/3] omap2: Change clk dev id for rng to omap3-rom-rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH 4/4] ARM: OMAP2+: Use pdata quirks for wl12xx legacy init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] ARM: OMAP2+: Use pdata quirk support for board-generic.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] ARM: OMAP2+: Add quirk support for legacy platform data init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] ARM: OMAP2+: Always build in board-generic
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] Clean up legacy platform data handling for omaps for v3.13
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 24/51] DMA-API: dma: pl330: add dma_set_mask_and_coherent() call
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: OMAP35x MMC Host Controller compatibility with SDXC?
  • From: Kevyn-Alexandre Paré <kevyn.alexandre.pare@xxxxxxxxx>
• Re: [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/3] omap2: Change clk dev id for rng to omap3-rom-rng
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/3] omap2: Change clk dev id for rng to omap3-rom-rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-boneblack: move fixed regulator to board level
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v2 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/4] usb: musb: am335x: Do not remove the session bit HOST-only mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] usb: musb: am335x: add second port to beagle bone
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] usb: usb: dsps: update code according to the binding document
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb: musb: dsps fix the typo in reg-names of the dma node
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 16/51] DMA-API: ppc: vio.c: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 23/51] DMA-API: dma: pl08x: add dma_set_mask_and_coherent() call
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 40/51] DMA-API: crypto: fix ixp4xx crypto platform device support
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/51] DMA-API: provide a helper to set both DMA and coherent DMA masks
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] omap2: Change clk dev id for rng to omap3-rom-rng
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v2 0/3] OMAP3 ROM Random Number Generator support
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v2 2/3] hwrng: OMAP3 ROM Random Number Generator support
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v2 3/3] RX-51: Add support for OMAP3 ROM Random Number Generator
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/51] DMA-API: net: broadcom/b44: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 38/51] DMA-API: staging: use dma_set_coherent_mask()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 37/51] DMA-API: usb: use new dma_coerce_mask_and_coherent()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 36/51] DMA-API: usb: use dma_set_coherent_mask()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 34/51] DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 33/51] DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 32/51] DMA-API: mmc: sdhci-acpi: use dma_coerce_mask_and_coherent()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 14/51] DMA-API: net: b43: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH 31/51] DMA-API: media: omap3isp: use dma_coerce_mask_and_coherent()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 30/51] DMA-API: dma: dw_dmac.c: convert to use dma_coerce_mask_and_coherent()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 29/51] DMA-API: ata: pata_octeon_cf: convert to use dma_coerce_mask_and_coherent()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 28/51] DMA-API: sound: fix dma mask handling in a lot of drivers
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 26/51] DMA-API: usb: ohci-sa1111: add a note about DMA masks
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 27/51] DMA-API: provide a helper to setup DMA masks
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 21/51] DMA-API: usb: ssb-hcd: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 25/51] DMA-API: video: clcd: add dma_set_mask_and_coherent() call
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 20/51] DMA-API: usb: bcma: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 15/51] DMA-API: net: b43legacy: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 10/51] DMA-API: net: broadcom/bnx2x: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 19/51] DMA-API: media: dt3155v4l: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 17/51] DMA-API: block: nvme-core: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 12/51] DMA-API: net: intel/e1000: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 18/51] DMA-API: staging: et131x: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 13/51] DMA-API: net: sfc/efx.c: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 11/51] DMA-API: net: emulex/benet: replace dma_set_mask()+dma_set_coherent_mask() with new helper
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 24/51] DMA-API: dma: pl330: add dma_set_mask_and_coherent() call
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 22/51] DMA-API: amba: get rid of separate dma_mask
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 46/51] ARM: DMA-API: better handing of DMA masks for coherent allocations
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 45/51] DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 47/51] ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 48/51] ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 49/51] ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 50/51] ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 51/51] ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFC PATCH 15/15] arm: dts: dra7: add sata node
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Archit Taneja <archit@xxxxxx>
• Re: [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver
  • From: Sricharan R <r.sricharan@xxxxxx>
• [PATCH 1/1] usb: dwc3: Remove redundant pci_set_drvdata
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [RFC PATCH 12/15] ARM: dts: omap5: add ocp2scp1 address resource
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v11 0/8] PHY framework
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 0/8] PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 41/51] DMA-API: crypto: remove last references to 'static struct device *dev'
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 43/51] DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 44/51] DMA-API: dcdbas: update DMA mask handing
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 35/51] DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/51] DMA-API: provide a helper to set both DMA and coherent DMA masks
  • From: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>
• [PATCH 08/51] DMA-API: net: intel/ixgbevf: fix 32-bit DMA mask handling
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 03/51] DMA-API: net: intel/e1000e: fix 32-bit DMA mask handling
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 06/51] DMA-API: net: intel/ixgb: fix 32-bit DMA mask handling
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 07/51] DMA-API: net: intel/ixgbe: fix 32-bit DMA mask handling
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 05/51] DMA-API: net: intel/igbvf: fix 32-bit DMA mask handling
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 04/51] DMA-API: net: intel/igb: fix 32-bit DMA mask handling
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 01/51] DMA-API: provide a helper to set both DMA and coherent DMA masks
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 02/51] DMA-API: net: brocade/bna/bnad.c: fix 32-bit DMA mask handling
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] RX-51: Add missing max_current to rx51_lp5523_led_config
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH 00/51] DMA mask changes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] RX-51: Add missing max_current to rx51_lp5523_led_config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] PM / OPP: rename to dev_pm_opp * equivalents
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/3] PM / OPP: rename header to linux/pm_opp.h
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/3] PM / OPP: rename data structures to dev_pm equivalents
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/3] PM / OPP: rename to dev_pm_opp * equivalents
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] RX-51: Add missing max_current to rx51_lp5523_led_config
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH] ARM: dts: omap5-uevm: mark TWL6037 as system-power-controller
  • From: Nishanth Menon <nm@xxxxxx>
• Re: 3.12-rc1: no longer compiles for Nokia n900 (omap based), display no longer works
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  • From: Luca Coelho <luca@xxxxxxxxx>
• [PATCH] ARM: dts: am335x-boneblack: move fixed regulator to board level
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/2] ARM: dts: dra7-evm: add support for sd, eMMC
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP35x MMC Host Controller compatibility with SDXC?
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [RFC PATCH 01/15] phy: rename struct omap_control_usb to struct omap_control_phy
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [RFC PATCH 12/15] ARM: dts: omap5: add ocp2scp1 address resource
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 15/15] arm: dts: dra7: add sata node
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 07/11] ASoC: tlv320aic3x: Add regulators to DT bindings document
  • From: "Sarha, Jyri" <jsarha@xxxxxx>
• RE: [PATCH v3 01/11] ASoC: davinci-evm: Move sysclk logic away from evm_hw_params
  • From: "Sarha, Jyri" <jsarha@xxxxxx>
• Re: [PATCH v3 00/11] Fix AM335x-evm analog audio support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 07/11] ASoC: tlv320aic3x: Add regulators to DT bindings document
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [RFC PATCH 11/15] arm: omap5: hwmod: add missing ocp2scp hwmod data
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 12/15] ARM: dts: omap5: add ocp2scp1 address resource
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 14/15] ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 15/15] arm: dts: dra7: add sata node
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 13/15] arm: dts: omap5: add sata node
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v3 01/11] ASoC: davinci-evm: Move sysclk logic away from evm_hw_params
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [RFC PATCH 10/15] ARM: omap5: hwmod: Add ocp2scp3 and sata hwmods
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC PATCH 00/15] Add SATA support for TI OMAP5 and DRA7 SoCs
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 01/15] phy: rename struct omap_control_usb to struct omap_control_phy
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 02/15] phy: omap-control: Update DT binding information
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 03/15] ARM: dts: omap5: Add clocks to usb3_phy node
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 05/15] phy: omap-pipe3: Add SATA DPLL support
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 07/15] ARM: dts: omap5: Update usb3phy node
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 04/15] phy: omap-pipe3: use generic clock names
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 06/15] phy: omap-pipe3: update compatibility string and DT binding
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver
  • From: Roger Quadros <rogerq@xxxxxx>
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Mark Jackson <mpfj-list@xxxxxxxxxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Nishanth Menon <nm@xxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: George Cherian <george.cherian@xxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v3 11/11] ARM/dts: am335x-evm: Add audio support for am335x-evm.dts
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 10/11] ARM/dts: am33xx: mcasp: Add new dma register location to reg-property
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 09/11] ARM/dts: am33xx: Add mcasp0 and mcasp1 device tree entries
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 06/11] ASoC: davinci: Add support for AM33xx SoC Audio
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 08/11] ASoC: tlv320aic3x: Add codec pins to DT bindings document
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 07/11] ASoC: tlv320aic3x: Add regulators to DT bindings document
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 05/11] ASoC: davinci-mcasp: Interrupts property to optional and add interrupt-names
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 04/11] ASoC: davinci-mcasp: Extract DMA channels directly from DT
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 03/11] ASoC: davinci-mcasp: Add DMA register locations to DT
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 02/11] ASoC: davinci-evm: Add device tree binding
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 01/11] ASoC: davinci-evm: Move sysclk logic away from evm_hw_params
  • From: Jyri Sarha <jsarha@xxxxxx>
• [PATCH v3 00/11] Fix AM335x-evm analog audio support
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 2/2] drm: omap: disconnect devices when omapdrm module is removed
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 2/2] drm: omap: disconnect devices when omapdrm module is removed
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: 3.12-rc1: no longer compiles for Nokia n900 (omap based)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: 3.12-rc1: no longer compiles for Nokia n900 (omap based), display no longer works
  • From: Pavel Machek <pavel@xxxxxx>
• Re: 3.12-rc1: no longer compiles for Nokia n900 (omap based)
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources
  • From: Sekhar Nori <nsekhar@xxxxxx>
• 3.12-rc1: no longer compiles for Nokia n900 (omap based)
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 2/2] drm: omap: disconnect devices when omapdrm module is removed
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 1/2] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Archit Taneja <archit@xxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: George Cherian <george.cherian@xxxxxx>
• Re: [PATCH] ARM: dts: igep00x0: Add pinmux configuration for MCBSP2.
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  • From: Luca Coelho <luca@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH] RX-51: Add missing max_current to rx51_lp5523_led_config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH] RX-51: Add missing max_current to rx51_lp5523_led_config
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [GIT PULL 2/2] omap dt fixes against v3.12-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL 1/2] omap fixes against v3.12-rc1
  • From: Olof Johansson <olof@xxxxxxxxx>
• [GIT PULL 1/2] omap fixes against v3.12-rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] hwrng: OMAP3 ROM Random Number Generator support
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 2/2] RX-51: Add support for OMAP3 ROM Random Number Generator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] hwrng: OMAP3 ROM Random Number Generator support
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 2/2] RX-51: Add support for OMAP3 ROM Random Number Generator
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH 1/2] hwrng: OMAP3 ROM Random Number Generator support
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH 0/2] OMAP3 ROM Random Number Generator support
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH v4 2/2] RX-51: ARM errata 430973 workaround
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v3 2/2] RX-51: ARM errata 430973 workaround
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFCv2 2/3] ARM: OMAP2+: HSI: Introduce OMAP SSI driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 2/2] RX-51: ARM errata 430973 workaround
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 0/3] mmc: omap_hsmmc: get rid of ti,non-removable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] OMAP2+: mux: fix trivial typo in name
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 0/4] cpsw: support for control module register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] RX-51: ARM errata 430973 workaround
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] RX-51: ARM errata 430973 workaround
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/2] RX-51: ARM errata 430973 workaround
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH usb 2/2] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: TI816X: add clock domain support for TI816x
  • From: Aida Mynzhasova <aida.mynzhasova@xxxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH V4] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH V3] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH V3] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Sricharan R <r.sricharan@xxxxxx>
• [PATCH V2] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP5: id: Remove ES1.0 support
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] ARM: OMAP5: id: Remove ES1.0 support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: DRA7: realtime_counter: Add ratio registers for 20MHZ sys-clk frequency
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH V2] ARM: dts: DRA7: provide arch-timer frequenecy parameter
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH V2] ARM: dts: DRA7: provide arch-timer frequenecy parameter
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: DRA7: realtime_counter: Add ratio registers for 20MHZ sys-clk frequency\
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v7 05/10] usb: musb: omap2430: Don't use omap_get_control_dev()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 04/10] usb: phy: omap-usb3: Don't use omap_get_control_dev()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 01/10] usb: phy: omap-control: Get rid of platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 07/10] usb: phy: omap: get rid of omap_get_control_dev()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 03/10] usb: phy: omap-usb2: Don't use omap_get_control_dev()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 02/10] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 10/10] usb: phy: omap-usb2: Manage phy clock and not otg controller clock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 06/10] ARM: dts: omap4: update omap-control-usb nodes
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 09/10] usb: dwc3: omap: manage "usb_otg_ss_refclk960m" clock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 08/10] ARM: dts: omap5: update omap-control-usb node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 00/10] phy: omap-usb: Support multiple instances and new types
  • From: Roger Quadros <rogerq@xxxxxx>
• [GIT PULL] ARM: DTS: Fix OMAP bugs for 3.12-rc, take #2
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [GIT PULL] ARM: DTS: Fix OMAP bugs for 3.12-rc
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: dts: igep00x0: Add pinmux configuration for MCBSP2.
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: TI816X: add clock domain support for TI816x
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V2] ARM: dts: DRA7: provide arch-timer frequenecy parameter
  • From: Sricharan R <r.sricharan@xxxxxx>
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register
  • From: Sricharan R <r.sricharan@xxxxxx>
• [PATCH] ARM: DRA7: realtime_counter: Add ratio registers for 20MHZ sys-clk frequency
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: PCF857x and 16-bit GPIO expanders
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH] drm: omap: fix: Defer probe if an omapdss device requests for it at connect
  • From: Archit Taneja <archit@xxxxxx>
• Re: [GIT PULL] ARM: DTS: Fix OMAP bugs for 3.12-rc
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• [GIT PULL] ARM: DTS: Fix OMAP bugs for 3.12-rc
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: TI816X: add clock domain support for TI816x
  • From: Aida Mynzhasova <aida.mynzhasova@xxxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] RX-51: ARM errata 430973 workaround
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 02/11] omapdss: HDMI: create a HDMI PLL library
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] RFC: interrupt consistency check for OF GPIO IRQs
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ADP1653 board code for Nokia RX-51
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mailbox: remove unnecessary platform_set_drvdata()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: OMAP2: Make MACH_OMAP3EVM select NOP_USB_XCEIV
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: fix return value check in omap_device_build_from_dt()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] RX-51: ARM errata 430973 workaround
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 0/3] cleanup of gpio_pcf857x.c
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Suman Anna <s-anna@xxxxxx>
• OMAP35x MMC Host Controller compatibility with SDXC?
  • From: Kevyn-Alexandre Paré <kevyn.alexandre.pare@xxxxxxxxx>
• Re: [PATCH 02/11] omapdss: HDMI: create a HDMI PLL library
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCHv2 0/9] omap hwspinlock dt support
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 2/9] hwspinlock/omap: add support for dt nodes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 1/9] hwspinlock/core: add common dt bindings and OF helpers
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 3/9] ARM: dts: OMAP4: Add hwspinlock node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 4/9] ARM: OMAP5: hwmod data: Add spinlock data
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 6/9] hwspinlock/omap: support AM33xx
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 8/9] ARM: dts: AM33XX: Add hwspinlock node
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 9/9] ARM: AM33xx: hwmod_data: add the sysc configuration for spinlock
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 7/9] hwspinlock/omap: enable module before reading SYSSTATUS register
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCHv2 5/9] ARM: dts: OMAP5: Add hwspinlock node
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• PCF857x and 16-bit GPIO expanders
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH V2] ARM: dts: DRA7: provide arch-timer frequenecy parameter
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: DRA7: provide arch-timer frequenecy parameter
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• [PATCH] ARM: dts: DRA7: provide arch-timer frequenecy parameter
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 03/15] OMAPDSS: fix DPI and SDI device ids
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv6 01/45] CLK: TI: Add DPLL clock support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH v4 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v11 0/8] PHY framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH RFC v3 08/12] ARM: OMAP2+: CM: AM43x clockdomain data
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources
  • From: Joel Fernandes <joelf@xxxxxx>
• Re: [PATCH RFC v3 08/12] ARM: OMAP2+: CM: AM43x clockdomain data
  • From: Afzal Mohammed <afzal@xxxxxx>
• Re: [RFC PATCH 04/11] asm-generic: fncpy: Add function copying macros
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v4 0/2] ARM: dts: Beaglebone MMC fixes
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v4 2/4] ARM: dts: am335x-boneblack: add eMMC DT entry
  • From: Benoit Cousson <bcousson@xxxxxxxxxxxx>
• Re: [PATCH v4 0/3] cleanup of gpio_pcf857x.c
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RFC PATCH 00/11] Embeddable Position Independent Executable
  • From: Russ Dill <Russ.Dill@xxxxxx>
• [RFC PATCH 01/11] asm-generic: io: Add exec versions of ioremap
  • From: Russ Dill <Russ.Dill@xxxxxx>
• [RFC PATCH 03/11] misc: SRAM: Add option to map SRAM to allow code execution
  • From: Russ Dill <Russ.Dill@xxxxxx>