The following series adds Cyclic DMA support to TI EDMA DMA Engine driver. First we split out the calculations for the Slave DMA case into a separate function so that we may reuse it for the calculations of Cyclic DMA parameters. Next patch then adds the actual support for Cyclic DMA, enables interrupts correctly and uses's the callbacks in virt-dma during interrupts thus signalling back to the ALSA layer that a period was transmitted. Some background on motivation for this series: Currently, only user of Cyclic DMA in EDMA is davinci-pcm driver. As of today, this driver directly calls into the EDMA private API (arch/arm/common/edma.c) without going through the DMAEngine. davinci-pcm in future will be modified to use DMA Engine framework for Cyclic DMA instead of directly using the Private API. However that's a much larger effort, involving dealing with ping-pong from SRAM on user's of the Davinci McASP, etc. As a first step, we add Cyclic DMA support to the EDMA driver so that this may be used when the actual conversion of davinci-pcm happens. Tested series along with couple of hacks to davinci-pcm to work with DMA Engine: git@xxxxxxxxxx:joelagnel/linux-kernel.git (branch dma/cyclic) Joel Fernandes (3): dma: edma: Split out PaRAM set calculations into its own function dma: edma: Add support for Cyclic DMA dma: edma: Increase maximum SG limit to 20 drivers/dma/edma.c | 350 +++++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 273 insertions(+), 77 deletions(-) -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
