On Tuesday 24 September 2013 11:14 AM, Sekhar Nori wrote:
On Tuesday 24 September 2013 11:09 AM, Sourav Poddar wrote:
omap5 has all devices enable by default.
Disable thosw not required in omap5 uevm board.
s/thosw/those
Fix the following:
Added status parameter
Simulataneously, fix some tab formatting.
s/Simulataneously/Simultaneously
Signed-off-by: Sourav Poddar<sourav.poddar@xxxxxx>
---
arch/arm/boot/dts/omap5-uevm.dts | 38 +++++++++++++++++++++++++++++++-------
1 files changed, 31 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 65d7b60..78cf0f2 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -450,6 +450,18 @@
};
};
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+&i2c4 {
+ status = "disabled";
+};
The right thing to do would be to mark these as disabled in omap5.dtsi
so boards can enable only what they need instead of disable what they
don't need (which is potentially a very long list)
Yes, initially I thought so. But saw these varies from soc to soc.
On DRA, it is done the way you suggested. For omap5, I saw mmc
getting disabled in board dts.
I can change these though. Then, other modules like keypad/mmc should
also be disable in
dtsi file to have some uniformity. ?
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
