Re: [PATCH 3/4] usb: musb: am335x: Do not remove the session bit HOST-only mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 15, 2013 at 05:21:51PM +0200, Sebastian Andrzej Siewior wrote:
> This is what I observe:
> On the first connect, the musb starts with DEVCTL.Session set. On
> disconnect, musb_core calls try_idle. That functions removes the Session
> bit signalizing that the session is over (something that only in OTG is
> required). A new device, that is plugged, is no longer recognized.
> I've setup a timer and checked the DEVCTL register and I haven't seen a
> change in VBus and I saw the B-Device bit set. After setting the IDDIG
> into A mode and forcing the device to behave like a A device, I didn't
> see a change.
> Neither VBUS goes to 0b11 nor does a session start request comes.
> In the TI-v3.2 kernel they skip to call musb_platform_try_idle() in the
> OTG_STATE_A_WAIT_BCON state while not in OTG mode.
> Since the second port hast a standard A plug the patch changes the port
> to run in host mode only and skips the timer which would remove
> DEVCTL.Session so we can reconnect to another device later.
> 
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>

Acked-by: Felipe Balbi <balbi@xxxxxx>

> ---
>  arch/arm/boot/dts/am335x-evm.dts | 3 +++
>  drivers/usb/musb/musb_dsps.c     | 2 ++
>  2 files changed, 5 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 648a67e..794b38b9 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -192,6 +192,9 @@
>  
>  			usb@47401800 {
>  				status = "okay";
> +				musb1: usb@47401c00 {
> +					port-mode = <1>;
> +				};
>  			};
>  
>  			dma-controller@07402000  {
> diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
> index 7368577..b7b2346 100644
> --- a/drivers/usb/musb/musb_dsps.c
> +++ b/drivers/usb/musb/musb_dsps.c
> @@ -230,6 +230,8 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
>  		glue->last_timer = jiffies;
>  		return;
>  	}
> +	if (musb->port_mode == MUSB_PORT_MODE_HOST)
> +		return;
>  
>  	if (time_after(glue->last_timer, timeout) &&
>  				timer_pending(&glue->timer)) {
> -- 
> 1.8.4.rc2
> 

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux