Linux MMC Development
[Prev Page][Next Page]
- Re: [PATCH v3 1/3] mmc: core: Add mmc_regulator_set_vqmmc()
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 2/2] mmc: dw_mmc: Don't crash if we get an interrupt before slot has initted
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: dw_mmc: Only enable CD after setup and only if needed
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] mmc: dw_mmc: Give a good reset after we give power
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: dw_mmc: Make sure we only adjust the clock when power is on
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: Don't start commands while busy
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: fix bug that cause mmc_test failture
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 1/2] mmc: dw_mmc: Only enable CD after setup and only if needed
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 2/2] mmc: dw_mmc: Don't crash if we get an interrupt before slot has initted
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: Help needed: Enabling HPI causes some eMMC devices to stop working
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH V5 1/2] mmc: dw_mmc: exynos: Support eMMC's HS400 mode
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH/RFC] mmc: sh_mmcif: Add exclusion between cmd and interrupt
- From: Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx>
- Re: Help needed: Enabling HPI causes some eMMC devices to stop working
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: rockchip: add support MMC_CAP_RUNTIME_RESUME capability
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH 2/2] mmc: dw_mmc: Give a good reset after we give power
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: dw_mmc: Make sure we only adjust the clock when power is on
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH] mmc: pwrseq: simplify alloc/free hooks
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: Don't start commands while busy
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH V5 1/2] mmc: dw_mmc: exynos: Support eMMC's HS400 mode
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- Re: [PATCH V5 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH V5 1/2] mmc: dw_mmc: exynos: Support eMMC's HS400 mode
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: Don't start commands while busy
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: rockchip: Add DW_MCI_QUIRK_RETRY_DELAY
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 0/2] tmio: mmc: replace sh_mobile_sdhi_info to tmio_mmc_data
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: Don't start commands while busy
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH] mmc: sunxi: avoid invalid pointer calculation
- From: David Lanzendörfer <david.lanzendoerfer@xxxxxx>
- [PATCH] mmc: sunxi: avoid invalid pointer calculation
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 0/2] tmio: mmc: replace sh_mobile_sdhi_info to tmio_mmc_data
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 1/4] mmc: core: fold mmc_set_bus_width calls into sdio_enable_4bit_bus.
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 2/4] mmc: core: allow non-blocking form of mmc_claim_host
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 3/4] mmc: sdio: support switching to 1-bit before turning off clocks
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 4/4] mmc: omap_hsmmc: switch to 1-bit before stopping clocks.
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 0/4] Switch to 1-bit mode SDIO before disabling clocks.
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 2/2] mmc: sh_mobile_sdhi: remove sh_mobile_sdhi_info
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH 1/2] mmc: tmio: mmc: tmio: tmio_mmc_data has .chan_priv_?x
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- [PATCH 0/2] tmio: mmc: replace sh_mobile_sdhi_info to tmio_mmc_data
- From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: Don't start commands while busy
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: Don't start commands while busy
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/7] Fixes and improvements for SDHCI on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH] mmc: Fix hardware dependencies for sdhci-pxav3
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH] mmc: pwrseq_simple: fix error path in mmc_pwrseq_simple_alloc.
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH] mmc: pwrseq_simple: fix error path in mmc_pwrseq_simple_alloc.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: Don't start commands while busy
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH v2] mmc: dw_mmc: fix bug that cause mmc_test failture
- From: Doug Anderson <dianders@xxxxxxxxxx>
- [PATCH v2] mmc: dw_mmc: Don't start commands while busy
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: Don't start commands while busy
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 0/3] about data busy
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 2/2] mmc: dw_mmc: Give a good reset after we give power
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 1/2] mmc: dw_mmc: Make sure we only adjust the clock when power is on
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH] mmc: dw_mmc: Don't start commands while busy
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2] mmc: dw_mmc: fix bug that cause mmc_test failture
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v2] mmc: dw_mmc: rockchip: add support MMC_CAP_RUNTIME_RESUME capability
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 3/3] mmc: dw_mmc: Don't start command while data busy
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: fix bug that cause mmc_test failture
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: rockchip: add support MMC_CAP_RUNTIME_RESUME capability
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v4 0/3] about data busy
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Help needed: Enabling HPI causes some eMMC devices to stop working
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH] mmc: tmio: Remove bogus un-initialization in tmio_mmc_host_free()
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- "Driver 'mmcblk' needs updating - please use bus_type methods"
- From: "Minchev, Todor" <todor.minchev@xxxxxxxxx>
- Re: Kernel 3.19 on iMX6SL
- From: John Tobias <john.tobias.ph@xxxxxxxxx>
- Re: SDIO - High Speed - iMX6
- From: John Tobias <john.tobias.ph@xxxxxxxxx>
- Re: Kernel 3.19 on iMX6SL
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: SDIO - High Speed - iMX6
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: mmc: Driver Strength Device Property
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: mmc: Driver Strength Device Property
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: mmc: Driver Strength Device Property
- From: Philip Rakity <prakity@xxxxxxxxxx>
- Re: mmc: Driver Strength Device Property
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [RFC PATCH] mmc: dw_mmc: mark card as removed if error occurs and status is busy
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- mmc: Driver Strength Device Property
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- RE: [RFC PATCH 0/5]mmc: Soft Command queue implementation for eMMC5.1 device
- From: Alex Lemberg <Alex.Lemberg@xxxxxxxxxxx>
- Re: [PATCH v4 0/3] about data busy
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- RE: [RFC PATCH 0/5]mmc: Soft Command queue implementation for eMMC5.1 device
- From: "Dong, Chuanxiao" <chuanxiao.dong@xxxxxxxxx>
- RE: [RFC PATCH 0/5]mmc: Soft Command queue implementation for eMMC5.1 device
- From: Alex Lemberg <Alex.Lemberg@xxxxxxxxxxx>
- Re: [PATCH v4 0/3] about data busy
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- Re: [PATCH/RFC] mmc: sh_mmcif: Add exclusion between cmd and interrupt
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH] mmc: sirf: update sdhci_sirf_execute_tuning procedure
- From: Barry Song <21cnbao@xxxxxxxxx>
- [PATCH/RFC] mmc: sh_mmcif: Move dev_err() of mmcif_timeout_work()
- From: Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx>
- [PATCH/RFC] mmc: sh_mmcif: Add exclusion between cmd and interrupt
- From: Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx>
- Re: [PATCH v4 0/3] about data busy
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [RFC] mmc: Do no export the rpmb as a partition
- From: Daniel Yerushalmi <danielye@xxxxxxxxx>
- Re: Kernel 3.19 on iMX6SL
- From: John Tobias <john.tobias.ph@xxxxxxxxx>
- Re: SDIO - High Speed - iMX6
- From: John Tobias <john.tobias.ph@xxxxxxxxx>
- Re: SDIO - High Speed - iMX6
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: Kernel 3.19 on iMX6SL
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH v4 2/3] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v4 3/3] mmc: dw_mmc: Don't start command while data busy
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v4 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v4 0/3] about data busy
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Kernel 3.19 on iMX6SL
- From: John Tobias <john.tobias.ph@xxxxxxxxx>
- [PATCH v3 2/3] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v3 3/3] mmc: dw_mmc: Don't start command while data busy
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v3 1/3] mmc: dw_mmc: update clock after host reach a stable voltage
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v3 0/3] about data busy
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH RESEND] ARM: dts: exynos5422-odroidxu3: add mmc detect gpio
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH RESEND] ARM: dts: exynos5422-odroidxu3: add mmc detect gpio
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- [PATCH] mmc: dw_mmc: rockchip: add support MMC_CAP_RUNTIME_RESUME capability
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [RFC/PATCH] mmc: tmio: Fix PIO mode with CONFIG_HIGHMEM
- From: keita kobayashi <keita.kobayashi.ym@xxxxxxxxxxx>
- RE: [RFC PATCH 0/5]mmc: Soft Command queue implementation for eMMC5.1 device
- From: "Dong, Chuanxiao" <chuanxiao.dong@xxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Optimize write_w path for tegra114 and later
- From: Rhyland Klein <rklein@xxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH] mmc: pwrseq: simplify alloc/free hooks
- From: Alexandre Courbot <acourbot@xxxxxxxxxx>
- Re: [PATCH] mmc: tegra: Optimize write_w path for tegra114 and later
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- SDIO - High Speed - iMX6
- From: John Tobias <john.tobias.ph@xxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- [PATCH] mmc: tegra: Optimize write_w path for tegra114 and later
- From: Rhyland Klein <rklein@xxxxxxxxxx>
- [RFC] mmc: Do no export the rpmb as a partition
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- RE: [RFC PATCH 0/5]mmc: Soft Command queue implementation for eMMC5.1 device
- From: Alex Lemberg <Alex.Lemberg@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH V4 3/4] mmc: pwrseq: Initial support for the simple MMC power sequence provider
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH V4 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V4 3/4] mmc: pwrseq: Initial support for the simple MMC power sequence provider
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [ANNOUNCE] MMC in latency mode the next two weeks
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Addy <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: fix bug that cause mmc_test failture
- From: Addy <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Addy <addy.ke@xxxxxxxxxxxxxx>
- iMX6 SDR12 support
- From: John Tobias <john.tobias.ph@xxxxxxxxx>
- Doubt on mmc erase command
- From: Sheetal <sheetal.tigadoli@xxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- Re: [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- [RFC PATCH] mmc: dw_mmc: add status check before clock update
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH] mmc: dw_mmc: add status check before clock update
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: fix bug that cause mmc_test failture
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH 1/7] pinctrl: mediatek: emulate GPIO interrupt on both-edges
- From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
- Re: [PATCH V4 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH] mmc: sdhci: Set SDHCI_POWER_ON with external vmmc
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 1/7] pinctrl: mediatek: emulate GPIO interrupt on both-edges
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [GIT PULL] MMC for v.3.20
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V4 3/4] mmc: pwrseq: Initial support for the simple MMC power sequence provider
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [PATCH 1/7] pinctrl: mediatek: emulate GPIO interrupt on both-edges
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [RFC] MMC: CMD52 During Data Transfer support
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 2/4] mmc: sdhci: do not set AUTO_CMD12 for multi-block CMD53
- From: Scott Branden <sbranden@xxxxxxxxxxxx>
- [PATCH 4/4] mmc: sdhci-iproc: add device tree bindings
- From: Scott Branden <sbranden@xxxxxxxxxxxx>
- [PATCH 0/4] Add support for IPROC SDHCI controller
- From: Scott Branden <sbranden@xxxxxxxxxxxx>
- [PATCH 1/4] mmc: sdhci: add quirk for ACMD23 broken
- From: Scott Branden <sbranden@xxxxxxxxxxxx>
- [PATCH 3/4] mmc: sdhci-iproc: add IPROC SDHCI driver
- From: Scott Branden <sbranden@xxxxxxxxxxxx>
- Re: [PATCH V2 15/15] mmc: core: Don't print reset warning if reset is not supported
- From: Johan Rudholm <jrudholm@xxxxxxxxx>
- Re: [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH V2 15/15] mmc: core: Don't print reset warning if reset is not supported
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH V2 15/15] mmc: core: Don't print reset warning if reset is not supported
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH V2 00/15] mmc: host: Add facility to support re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH v2 0/2] about data busy
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v2 1/2] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH v2 2/2] mmc: dw_mmc: Don't start command while data busy
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Addy <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [RFC] MMC: CMD52 During Data Transfer support
- From: Barry Song <21cnbao@xxxxxxxxx>
- Re: "Timeout waiting for hardware interrupt" on Lenovo Thinkpad Tablet 10
- From: "Simon Raffeiner (SCC)" <simon.raffeiner@xxxxxxx>
- Re: mmc does not work in qemu n900
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: NeilBrown <neilb@xxxxxxx>
- RE: [PATCH v3] mmc: Add Production State Awareness Support
- From: "Luca Porzio (lporzio)" <lporzio@xxxxxxxxxx>
- [PATCH V2 01/11] mmc: core: Reset driver type to default
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 10/11] mmc: sdhci-pci: Add support for drive strength selection for SPT
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 05/11] mmc: core: Factor out common code in drive strength selection
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 06/11] mmc: core: Record card drive strength
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 08/11] mmc: mmc: Add driver strength selection
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 11/11] mmc: sdhci-pci: Enable HS400 for some Intel host controllers
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 09/11] mmc: sdhci: Add a callback to select drive strength
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 04/11] mmc: core: Add 'card' to drive strength selection callback
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 03/11] mmc: core: Simplify card drive strength mask
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 02/11] mmc: core: Allow card drive strength to be different to host
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 07/11] mmc: mmc: Read card's valid driver strength mask
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 00/11] mmc: Add support for drive strength for eMMCs
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH 5/7] mmc: sdhci-bcm-kona: kill the "external_clk" member in driver private struct
- From: Kevin Hao <haokexin@xxxxxxxxx>
- Re: [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support
- From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
- Re: [PATCH 5/7] mmc: sdhci-bcm-kona: kill the "external_clk" member in driver private struct
- From: Ray Jui <rjui@xxxxxxxxxxxx>
- [PATCH 7/7] mmc: sdhci: set the .remove to sdhci_pltfm_unregister()
- From: Kevin Hao <haokexin@xxxxxxxxx>
- [PATCH 6/7] mmc: sdhci: disable the clock in sdhci_pltfm_unregister()
- From: Kevin Hao <haokexin@xxxxxxxxx>
- [PATCH 5/7] mmc: sdhci-bcm-kona: kill the "external_clk" member in driver private struct
- From: Kevin Hao <haokexin@xxxxxxxxx>
- [PATCH 4/7] mmc: sdhci-sirf: kill the "clk" member in driver private struct
- From: Kevin Hao <haokexin@xxxxxxxxx>
- [PATCH 3/7] mmc: tegra: use devm help functions to get the clk and gpio
- From: Kevin Hao <haokexin@xxxxxxxxx>
- [PATCH 2/7] mmc: sdhci-dove: kill the driver specific private struct
- From: Kevin Hao <haokexin@xxxxxxxxx>
- [PATCH 1/7] mmc: sdhci-dove: remove the unneeded error check
- From: Kevin Hao <haokexin@xxxxxxxxx>
- [PATCH 0/7] mmc: sdhci: set .remove to sdhci_pltfm_unregister()
- From: Kevin Hao <haokexin@xxxxxxxxx>
- Re: [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- [PATCH 12/12] mmc: sdhci-pci: Enable HS400 for some Intel host controllers
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 11/12] mmc: sdhci-pci: Add support for drive strength selection for SPT
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 07/12] mmc: mmc: Read card's valid driver strength mask
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 10/12] mmc: sdhci: Add a callback to select drive strength
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 09/12] mmc: core: Add function to read driver-strength device property
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 08/12] mmc: mmc: Add driver strength selection
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 06/12] mmc: core: Record card drive strength
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 05/12] mmc: core: Factor out common code in drive strength selection
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 04/12] mmc: core: Add 'card' to drive strength selection callback
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 03/12] mmc: core: Simplify card drive strength mask
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 02/12] mmc: core: Allow card drive strength to be different to host
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 01/12] mmc: core: Reset driver type to default
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH 00/12] mmc: Add support for drive strength for eMMCs
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH v2] mmc: core: add runtime-resume caps to support resume at runtime_resume
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH] mmc: dw_mmc: fix bug that cause 'Timeout sending command'
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [RFC] mmc: sdhci: implement light and heavy runtime pm resume
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v2 0/3] Add support for hardware reset of eMMC card on reboot
- From: Kukjin Kim <kgene@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Add multiple GPIO and external clock to MMC pwrseq_simple
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 0/6] Add multiple GPIO and external clock to MMC pwrseq_simple
- From: Kukjin Kim <kgene@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Add multiple GPIO and external clock to MMC pwrseq_simple
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH V3 10/15] mmc: core: Add support for HS400 re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH RESEND] mmc: sdhci-s3c: solve problem with sleeping in atomic context
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH] mmc: core: make the poll interval for the broken CD adjustable
- From: Kevin Hao <haokexin@xxxxxxxxx>
- Re: [PATCH RESEND] mmc: sdhci-s3c: solve problem with sleeping in atomic context
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- [PATCH RESEND] mmc: sdhci-s3c: solve problem with sleeping in atomic context
- From: Paul Osmialowski <p.osmialowsk@xxxxxxxxxxx>
- Re: [PATCH v4 1/3] mmc: pwrseq: add driver for emmc hardware reset
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v4] mmc: moxart: fix probe logic
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH] mmc: sdhci-pltfm: remove the unneeded check of disabled device
- From: Kevin Hao <haokexin@xxxxxxxxx>
- mmc0: error -84 whilst initialising SD card
- From: Mario <nutrinfnon@xxxxxxx>
- [PATCH v4] mmc: moxart: fix probe logic
- From: Jonas Jensen <jonas.jensen@xxxxxxxxx>
- [PATCH v4 1/3] mmc: pwrseq: add driver for emmc hardware reset
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v3] mmc: moxart: fix probe logic
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v3] mmc: moxart: fix probe logic
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH v3] mmc: moxart: fix probe logic
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] mmc: core: Invoke mmc_pwrseq_post_power_on() prior MMC_POWER_ON state
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- [PATCH] mmc: core: Invoke mmc_pwrseq_post_power_on() prior MMC_POWER_ON state
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v3] mmc: moxart: fix probe logic
- From: Jonas Jensen <jonas.jensen@xxxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2] mmc: moxart: fix probe logic
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: "Timeout waiting for hardware interrupt" on Lenovo Thinkpad Tablet 10
- From: Sébastien Bourdeauducq <sb@xxxxxxxxx>
- Re: "Timeout waiting for hardware interrupt" on Lenovo Thinkpad Tablet 10
- From: "Simon Raffeiner (SCC)" <simon.raffeiner@xxxxxxx>
- Re: [PATCH v3 1/3] mmc: pwrseq: add driver for emmc hardware reset
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH v3 1/3] mmc: pwrseq: add driver for emmc hardware reset
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- "Timeout waiting for hardware interrupt" on Lenovo Thinkpad Tablet 10
- From: Sébastien Bourdeauducq <sb@xxxxxxxxx>
- Re: [PATCH v2] mmc: moxart: fix probe logic
- From: Jonas Jensen <jonas.jensen@xxxxxxxxx>
- [PATCH v3 1/3] mmc: pwrseq: add driver for emmc hardware reset
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH v2 1/3] mmc: pwrseq: add driver for emmc hardware reset
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] mmc: pwrseq: add driver for emmc hardware reset
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v2 0/3] Add support for hardware reset of eMMC card on reboot
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- [PATCH v2 2/3] ARM: dts: exynos4412-odroid*: add eMMC reset line
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH v2 1/3] mmc: pwrseq: add driver for emmc hardware reset
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH v2 3/3] ARM: dts: exynos5422-odroidxu3: add eMMC reset line
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH v2 0/3] Add support for hardware reset of eMMC card on reboot
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH v2] mmc: Resolve BKOPS compatability issue
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH 2/5] drivers: mmc: card: Fixes Missing blank line after variable initialization, coding style warning
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH 2/5] drivers: mmc: card: Fixes Missing blank line after variable initialization, coding style warning
- From: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxx>
- [PATCH 4/5] drivers: mmc: card: Fixed ERROR that open brace should be on the previous line
- From: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxx>
- [PATCH 5/5] drivers: mmc: card: Fixed warning line over 80 characters in file block
- From: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxx>
- [PATCH 3/5] drivers: mmc: card: Fixes WARNING braces are not necessary for single statement
- From: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxx>
- [PATCH 1/5] drivers: mmc: card: Fix replaces simple_strtoul func call with kstrtoul
- From: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxx>
- [PATCH 0/5] drivers; mmc: card:
- From: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxx>
- Re: [PATCH] drivers: mmc: card: Fixing few coding style errors from file block.c
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH] drivers: mmc: card: Fixing few coding style errors from file block.c
- From: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxx>
- [PATCH 11/15] mmc: kconfig: replace PPC_OF with PPC
- From: Kevin Hao <haokexin@xxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH 1/4] mmc: core: fold mmc_set_bus_width calls into sdio_enable_4bit_bus.
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 2/4] mmc: core: allow non-blocking form of mmc_claim_host
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 3/4] mmc: sdio: support switching to 1-bit before turning off clocks
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 4/4] mmc: omap_hsmmc: switch to 1-bit before stopping clocks.
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH-v2 0/4] mmc: switch to 1-bit mode which stopping clocks.
- From: NeilBrown <neilb@xxxxxxx>
- Re: mmc does not work in qemu n900
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH v3 0/6] Add multiple GPIO and external clock to MMC pwrseq_simple
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 4/6] mmc: pwrseq_simple: Add optional reference clock support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH 1/4] mmc: core: add support for hardware reset gpio line
- From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] mmc: core: add support for hardware reset gpio line
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v3 4/6] mmc: pwrseq_simple: Add optional reference clock support
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v3 0/6] Add multiple GPIO and external clock to MMC pwrseq_simple
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 1/4] mmc: core: add support for hardware reset gpio line
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH v2] mmc: Resolve BKOPS compatability issue
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v2] mmc: Resolve BKOPS compatability issue
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: addy ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- [PATCH v2] mmc: moxart: fix probe logic
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] mmc: moxart: fix probe logic
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] mmc: moxart: fix probe logic
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH] mmc: card: Fixing few coding style errors
- From: Sheetal Tigadoli <sheetal.tigadoli@xxxxxxxxx>
- [PATCH] mmc: moxart: fix probe logic
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH v3 1/6] mmc: pwrseq: Document that simple sequence support more than one GPIO
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v3 2/6] mmc: pwrseq_simple: Extend to support more pins
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v3 4/6] mmc: pwrseq_simple: Add optional reference clock support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v3 3/6] mmc: pwrseq: Document optional clock for the simple power sequence
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v3 5/6] ARM: dts: exynos5250-snow: Enable wifi power-on
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v3 6/6] ARM: dts: exynos5250-snow: Add cap-sdio-irq to wifi mmc node
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v3 0/6] Add multiple GPIO and external clock to MMC pwrseq_simple
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v2 4/6] mmc: pwrseq_simple: Add optional reference clock support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/6] mmc: pwrseq_simple: Add optional reference clock support
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: sdhci: Apply FSL ESDHC reset handling quirk to OF
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v4 0/7] Fixes and improvements for SDHCI on Armada 38x
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v4 3/7] mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 5/7] ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 7/7] ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 6/7] ARM: mvebu: Update the SDHCI node on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 4/7] mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v4 0/7] Fixes and improvements for SDHCI on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] mmc: core: add support for hardware reset gpio line
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- Re: [PATCH 1/4] mmc: core: add support for hardware reset gpio line
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v2] mmc: Resolve BKOPS compatability issue
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: sdhci: switch voltage before sdhci_set_ios in runtime resume
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2] mmc: tegra: Write xfer_mode, CMD regs in together
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V2 00/15] mmc: host: Add facility to support re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 01/15] mmc: host: Add facility to support re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 03/15] mmc: core: Add support for re-tuning before each request
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 02/15] mmc: core: Disable re-tuning when card is no longer initialized
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 08/15] mmc: mmc: Comment that callers need to hold re-tuning if the card is put to sleep
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 12/15] mmc: sdhci: Flag re-tuning is needed on CRC or End-Bit errors
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 11/15] mmc: sdhci: Change to new way of doing re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 13/15] mmc: block: Check re-tuning in the recovery path
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 05/15] mmc: core: Hold re-tuning during switch commands
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 04/15] mmc: core: Check re-tuning before retrying
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 07/15] mmc: core: Hold re-tuning while bkops ongoing
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 06/15] mmc: core: Hold re-tuning during erase commands
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH] mmc: sdhci: switch voltage before sdhci_set_ios in runtime resume
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH v2 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 1/4] mmc: core: add support for hardware reset gpio line
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH V2 15/15] mmc: core: Don't print reset warning if reset is not supported
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 14/15] mmc: block: Retry data requests when re-tuning is needed
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 10/15] mmc: core: Add support for HS400 re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- [PATCH V2 09/15] mmc: core: Separate out the mmc_switch status check so it can be re-used
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [RFC PATCH 1/1] mmc: dw_mmc: Add runtime pm to dw_mmc
- From: Karol Wrona <k.wrona@xxxxxxxxxxx>
- [PATCH v2] mmc: Resolve BKOPS compatability issue
- From: Alexey Skidanov <alexey.skidanov@xxxxxxxxxxx>
- Re: [PATCH v3 4/7] mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] mmc: dw_mmc: wait until card ready if tuning fails
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] mmc: core: add support for hardware reset gpio line
- From: Tobias Jakobi <liquid.acid@xxxxxxx>
- RE: [PATCH] mmc: Manual BKOPs enablement bug fix
- From: Alex Lemberg <Alex.Lemberg@xxxxxxxxxxx>
- Re: [PATCH 3/3] mmc: omap_hsmmc: switch to 1-bit before turning off clocks if interrupts expected.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 2/5] mmc: pwrseq_simple: Extend to support more pins
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH 0/2] mmc: pwrseq: Add support to multiple gpios in pwrseq simple
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- [PATCH V5 1/2] mmc: dw_mmc: exynos: Support eMMC's HS400 mode
- From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
- [PATCH V5 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
- From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
- [PATCH v5 0/2] mmc: dw_mmc: exynos: Add HS400 support
- From: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
- Re: [PATCH V4 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- [PATCH] mmc: sdhci: Apply FSL ESDHC reset handling quirk to OF
- From: Martin Hicks <mort@xxxxxxxx>
- Re: [PATCH V4 3/4] mmc: pwrseq: Initial support for the simple MMC power sequence provider
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- [PATCH 4/4] ARM: dts: exynos5422-odroidxu3: add eMMC reset line
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH v2] mmc: tegra: Write xfer_mode, CMD regs in together
- From: Rhyland Klein <rklein@xxxxxxxxxx>
- Re: [PATCH 2/5] mmc: pwrseq_simple: Extend to support more pins
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] mmc: core: add support for hardware reset gpio line
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/5] mmc: pwrseq: Document that simple sequence support more than one GPIO
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH 5/5] ARM: dts: exynos5250-snow: Enable wifi power-on
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- [PATCH] mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH 2/5] mmc: pwrseq_simple: Extend to support more pins
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH 1/5] mmc: pwrseq: Document that simple sequence support more than one GPIO
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH 5/5] ARM: dts: exynos5250-snow: Enable wifi power-on
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH v2 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v2 6/6] ARM: dts: exynos5250-snow: Add cap-sdio-irq to wifi mmc node
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v2 3/6] mmc: pwrseq: Document optional clock for the simple power sequence
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v2 2/6] mmc: pwrseq_simple: Extend to support more pins
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v2 0/6] Add multiple GPIO and external clock to MMC pwrseq_simple
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v2 1/6] mmc: pwrseq: Document that simple sequence support more than one GPIO
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v2 4/6] mmc: pwrseq_simple: Add optional reference clock support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH v2 5/6] ARM: dts: exynos5250-snow: Enable wifi power-on
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 4/7] mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH] mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- [PATCH 4/5] mmc: pwrseq_simple: Add optional reference clock support
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 0/5] Add multiple GPIO and external clock to MMC pwrseq_simple
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 2/5] mmc: pwrseq_simple: Extend to support more pins
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 1/5] mmc: pwrseq: Document that simple sequence support more than one GPIO
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 5/5] ARM: dts: exynos5250-snow: Enable wifi power-on
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- [PATCH 0/2] mmc: pwrseq: Add support to multiple gpios in pwrseq simple
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH V4 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH] mmc: Manual BKOPs enablement bug fix
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: Manual BKOPs enablement bug fix
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 0/2] mmc: pwrseq: Add support to multiple gpios in pwrseq simple
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH 3/5] mmc: pwrseq: Document optional clock for the simple power sequence
- From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
- Re: [PATCH] mmc: Manual BKOPs enablement bug fix
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH 2/2] mmc: pwrseq: Update document with multiple gpios support
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- [PATCH 1/2] mmc: pwrseq: Add support to control multiple gpios in simple pwrseq
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi.
- From: Suman Tripathi <stripathi@xxxxxxx>
- Re: [PATCH 3/3] mmc: omap_hsmmc: switch to 1-bit before turning off clocks if interrupts expected.
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi.
- From: Suman Tripathi <stripathi@xxxxxxx>
- [PATCH 1/3] mmc: core: allow non-blocking form of mmc_claim_host
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 2/3] mmc: core: export functions for setting bus width.
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH 3/3] mmc: omap_hsmmc: switch to 1-bit before turning off clocks if interrupts expected.
- From: NeilBrown <neilb@xxxxxxx>
- [PATCH-RFC 0/3] mmc: switch to 1-bit mode which stopping clocks.
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v1 1/2] mmc: host: arasan: Add addition of-arasan quirks and IOMMU support for arasan SDHCI driver.
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Steven Rostedt <rostedt@xxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Steven Rostedt <rostedt@xxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Richard Weinberger <richard@xxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Steven Rostedt <rostedt@xxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Steven Rostedt <rostedt@xxxxxxxxxxx>
- [PATCH v1 2/2] arm64: dts: Add the arasan sdhc nodes in apm-storm.dtsi.
- From: Suman Tripathi <stripathi@xxxxxxx>
- [PATCH v1 1/2] mmc: host: arasan: Add addition of-arasan quirks and IOMMU support for arasan SDHCI driver.
- From: Suman Tripathi <stripathi@xxxxxxx>
- [PATCH v1 0/2] Add SDHCI support for APM X-Gene SoC using ARASAN SDHCI controller.
- From: Suman Tripathi <stripathi@xxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- [PATCH] mmc: Manual BKOPs enablement bug fix
- From: Alexey Skidanov <alexey.skidanov@xxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH 1/7] pinctrl: mediatek: emulate GPIO interrupt on both-edges
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: rockchip: remove incorrect __exit_p()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: exynos: remove incorrect __exit_p()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: Fix menuconfig alignment of MMC_SDHCI_* options
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: Enable Ricoh MMC quirk by default
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: How to manage SDIO interrupts with a runtime power managed host.
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Richard Weinberger <richard@xxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Borislav Petkov <bp@xxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Richard Weinberger <richard@xxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- [PATCH] mmc: print message if a card supports secure erase/trim
- From: Alexander Holler <holler@xxxxxxxxxxxxx>
- Re: [PATCH] mmc: print message if a card supports secure erase/trim
- From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
- How to manage SDIO interrupts with a runtime power managed host.
- From: NeilBrown <neilb@xxxxxxx>
- Re: mmc does not work in qemu n900
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: mmc does not work in qemu n900
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- mmc does not work in qemu n900
- From: Pali Rohár <pali.rohar@xxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: rockchip: remove incorrect __exit_p()
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] mmc: dw_mmc: exynos: remove incorrect __exit_p()
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v3 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Marcin Wojtas <mw@xxxxxxxxxxxx>
- [PATCH] mmc: dw_mmc: fix bug that cause mmc_test failture
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH 1/2] mmc: core: use card pointer as the first parameter of execute_tuning()
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH 2/2] mmc: dw_mmc: wait until card ready if tuning fails
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH 0/2] fix bug that cause tuning failure
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- [PATCH] mmc: Enable Ricoh MMC quirk by default
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH] mmc: Fix menuconfig alignment of MMC_SDHCI_* options
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH 3/3] ARM: edma: Split up header file to platform_data and API file
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
- Re: [PATCH] mmc: sdhci: Don't signal the sdio irq if it's not setup
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH] mmc: sdhci: Don't signal the sdio irq if it's not setup
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] mmc: dw_mmc: exynos: remove incorrect __exit_p()
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH] mmc: dw_mmc: rockchip: remove incorrect __exit_p()
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH V4 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH V4 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v3 7/7] ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 5/7] ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 6/7] ARM: mvebu: Update the SDHCI node on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 3/7] mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 4/7] mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v3 0/7] Fixes and improvements for SDHCI on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH V4 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
- Re: [PATCH v2 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH RESEND] mmc: mmci: Get rid of dead code in mmci_dma_setup
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2] mmc: sdhci-pxav3: fix race between runtime pm and irq
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v2 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Marcin Wojtas <mw@xxxxxxxxxxxx>
- Re: [PATCH v2 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Marcin Wojtas <mw@xxxxxxxxxxxx>
- Re: [PATCH v2 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Mark Rutland <mark.rutland@xxxxxxx>
- [PATCH v2 7/7] ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 6/7] ARM: mvebu: Update the SDHCI node on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 4/7] mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 5/7] ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/7] mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/7] Fixes and improvements for SDHCI on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH v2] mmc: sdhci-pxav3: fix race between runtime pm and irq
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH] mmc: sdhci-pxav3: fix race between runtime pm and irq
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH] mmc: sdhci-pxav3: fix race between runtime pm and irq
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: block: Remove unnecessary temporary variable
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V4 0/4] mmc: core: Add support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [RFC PATCH 1/1] mmc: dw_mmc: Add runtime pm to dw_mmc
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- RE: [RFC 1/2] mmc: core: support UHS-II in core stack.
- From: "Sun, Yi Y" <yi.y.sun@xxxxxxxxx>
- Re: [PATCH v4 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH 3/3] ARM: edma: Split up header file to platform_data and API file
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH v4 1/2] mmc: dw_mmc: exynos: Support eMMC's HS400 mode
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- [RFC PATCH 1/1] mmc: dw_mmc: Add runtime pm to dw_mmc
- From: Karol Wrona <k.wrona@xxxxxxxxxxx>
- [RFC PATCH 0/1] mmc: dw_mmc: Add runtime pm to dw_mmc
- From: Karol Wrona <k.wrona@xxxxxxxxxxx>
- Re: [PATCH 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH] mmc: block: Remove unnecessary temporary variable
- From: Tobias Klauser <tklauser@xxxxxxxxxx>
- Re: [PATCH v2 08/11] mmc: pwrseq_simple: Add support for a delay
- From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
- Re: [PATCH 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Marcin Wojtas <mw@xxxxxxxxxxxx>
- Re: [PATCH 0/7] Fixes and improvements for SDHCI on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 08/11] mmc: pwrseq_simple: Add support for a delay
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v4 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
- From: Alim Akhtar <alim.akhtar@xxxxxxxxx>
- Re: [PATCH v2 08/11] mmc: pwrseq_simple: Add support for a delay
- From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
- Re: [PATCH next] mmc: sdhci-pxav3: Remove checks for optional core clock in error/remove path
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 0/2] mmc: rtsx: add check before sending request
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH] mmc: sdhci-pxav3: fix race between runtime pm and irq
- From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
- Re: [PATCH] mmc: sdhci: host: fix odd_ptr_err.cocci warnings
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- Re: [PATCH] mmc: sdhci: host: fix odd_ptr_err.cocci warnings
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH] mmc: vub300: remove unreachable return value handling
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH] mmc: sdhci: host: fix odd_ptr_err.cocci warnings
- From: kbuild test robot <fengguang.wu@xxxxxxxxx>
- Re: [PATCH v2 08/11] mmc: pwrseq_simple: Add support for a delay
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [RFC 1/2] mmc: core: support UHS-II in core stack.
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 2/4] sdhci-st: Add support for stih407 family silicon.
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH RESEND] mmc: mmci: Get rid of dead code in mmci_dma_setup
- From: Pramod Gurav <pramod.gurav@xxxxxxxxxxxxxxx>
- [PATCH 7/7] ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH 6/7] ARM: mvebu: Update the SDHCI node on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH 5/7] ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/7] mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/7] mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/7] mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to erratum ERR-7878951
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/7] mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x flavor
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/7] Fixes and improvements for SDHCI on Armada 38x
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] mmc: block: fix format string warning
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v5 1/6] mfd: rtsx: add func to split u32 into register
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- RE: [RFC 0/2] mmc: UHS-II implementation
- From: "Sun, Yi Y" <yi.y.sun@xxxxxxxxx>
- Re: [PATCH v4 2/2] ARM: dts: Add HS400 support for exynos5420 and exynos5800
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v4 1/2] mmc: dw_mmc: exynos: Support eMMC's HS400 mode
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCH v5 1/6] mfd: rtsx: add func to split u32 into register
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v2] mmc: OCTEON: Add host driver for OCTEON MMC controller
- From: Aleksey Makarov <aleksey.makarov@xxxxxxxxxx>
- Re: [PATCH 1/4] clk: st: STiH410: Fix pdiv and fdiv divisor when setting rate
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- [PATCH] mmc: block: fix format string warning
- From: Asaf Vertz <asaf.vertz@xxxxxxxxxxx>
- [PATCH 3/4] mmc: sdhci-st: Update ST SDHCI binding documentation.
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH 2/4] sdhci-st: Add support for stih407 family silicon.
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH 4/4] ARM: STi: DT: STiH407: Add dt nodes for sdhci and emmc.
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH 1/4] clk: st: STiH410: Fix pdiv and fdiv divisor when setting rate
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- [PATCH 0/4] Add sd/emmc support for stih407 family silicon
- From: Peter Griffin <peter.griffin@xxxxxxxxxx>
- Re: [PATCH v5 1/6] mfd: rtsx: add func to split u32 into register
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] mmc: OCTEON: Add host driver for OCTEON MMC controller
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 01/17] mmc: tmio: add tmio_mmc_host_alloc/free()
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 02/17] mmc: tmio: tmio_mmc_host has .dma
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 03/17] mmc: tmio: tmio_mmc_host has .write16_hook
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 04/17] mmc: tmio: tmio_mmc_host has .clk_enable
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 05/17] mmc: tmio: tmio_mmc_host has .clk_disable
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 06/17] mmc: tmio: tmio_mmc_host has .multi_io_quirk
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 07/17] mmc: tmio: tmio_mmc_host has .bus_shift
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 08/17] mmc: tmio: tmio_mmc_data has .alignment_shift
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 09/17] mmc: tmio: tmio_mmc_data has .dma_rx_offset
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 17/17] mmc: tmio: remove TMIO_MMC_HAVE_CTL_DMA_REG flag
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] mmc: tmio: add missing EXPORT_SYMBOL for tmio_mmc_host_alloc/free
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 17/17] mmc: tmio: remove TMIO_MMC_HAVE_CTL_DMA_REG flag
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 09/17] mmc: tmio: tmio_mmc_data has .dma_rx_offset
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 08/17] mmc: tmio: tmio_mmc_data has .alignment_shift
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 07/17] mmc: tmio: tmio_mmc_host has .bus_shift
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 06/17] mmc: tmio: tmio_mmc_host has .multi_io_quirk
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 03/17] mmc: tmio: tmio_mmc_host has .write16_hook
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 04/17] mmc: tmio: tmio_mmc_host has .clk_enable
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 05/17] mmc: tmio: tmio_mmc_host has .clk_disable
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 02/17] mmc: tmio: tmio_mmc_host has .dma
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 01/17] mmc: tmio: add tmio_mmc_host_alloc/free()
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 0/17 v2] tmio: mmc: header cleanup / sh_mobile_cleanup
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v5 4/4] mmc: sdhci: host: add new f_sdh30
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- Re: [PATCH v5 4/4] mmc: sdhci: host: add new f_sdh30
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v5 4/4] mmc: sdhci: host: add new f_sdh30
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH v5 3/4] mmc: sdhci: add a quirk for single block transactions
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH v5 2/4] mmc: sdhci: add a quirk for tuning work around
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH v5 1/4] mmc: sdhci: add a voltage switch callback function
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH v5 0/4] mmc: sdhci: adding support for a new Fujitsu sdhci IP
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- Re: [PATCH v4 4/4] mmc: sdhci: host: add new f_sdh30
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH] mmc: sdhci: Don't signal the sdio irq if it's not setup
- From: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
- Re: [PATCH V2 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: NeilBrown <neil@xxxxxxxxxx>
- Re: [PATCH] mmc: OCTEON: Add host driver for OCTEON MMC controller
- From: David Daney <ddaney.cavm@xxxxxxxxx>
- Re: [PATCH] mmc: OCTEON: Add host driver for OCTEON MMC controller
- From: Mark Rutland <mark.rutland@xxxxxxx>
- [PATCH] mmc: OCTEON: Add host driver for OCTEON MMC controller
- From: Aleksey Makarov <aleksey.makarov@xxxxxxxxxx>
- Re: [PATCH v4 4/4] mmc: sdhci: host: add new f_sdh30
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH v4 4/4] mmc: sdhci: host: add new f_sdh30
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH v4 3/4] mmc: sdhci: add a quirk for single block transactions
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH v4 2/4] mmc: sdhci: add a quirk for tuning work around
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH v4 1/4] mmc: sdhci: add a voltage switch callback function
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- [PATCH v4 0/4] mmc: sdhci: adding support for a new Fujitsu sdhci IP
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V4 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V4 3/4] mmc: pwrseq: Initial support for the simple MMC power sequence provider
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V4 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V4 1/4] mmc: core: Initial support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V4 0/4] mmc: core: Add support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH] mmc: vub300: remove unreachable return value handling
- From: Nicholas Mc Guire <der.herr@xxxxxxx>
- Re: [RFC 0/3] mmc: Add dynamic frequency scaling
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [PATCH v3 4/4] mmc: sdhci: host: add new f_sdh30
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- Re: [PATCH] mmc: sdhci-s3c: solve problem with sleeping in atomic context
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- [PATCH] mmc: sdhci-s3c: solve problem with sleeping in atomic context
- From: Paul Osmialowski <p.osmialowsk@xxxxxxxxxxx>
- Re: [PATCH V3 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V3 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH V3 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V2 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH V3 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
- [PATCH V3 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 3/4] mmc: pwrseq: Initial support for the simple MMC power sequence provider
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 1/4] mmc: core: Initial support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V3 0/4] mmc: core: Add support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V2 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V2 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH V2 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v3 4/4] mmc: sdhci: host: add new f_sdh30
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 3/5] mmc: card: Add eMMC command queuing support in mmc block layer
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 3/5] mmc: card: Add eMMC command queuing support in mmc block layer
- From: Asutosh Das <asutoshd@xxxxxxxxxxxxxx>
- Re: [PATCH 2/5] mmc: queue: initialization of command-queue support
- From: Asutosh Das <asutoshd@xxxxxxxxxxxxxx>
- Re: [PATCH v3 4/4] mmc: sdhci: host: add new f_sdh30
- From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
- Re: [PATCH 1/5] mmc: core: Add support to read command queue parameters
- From: Asutosh Das <asutoshd@xxxxxxxxxxxxxx>
- Re: [PATCHv5] mmc: remove MMC_CAP_ERASE to enable trim in eMMC/SD Device
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- Re: [PATCHv5] mmc: remove MMC_CAP_ERASE to enable trim in eMMC/SD Device
- From: Puthikorn Voravootivat <puthik@xxxxxxxxxxxx>
- Re: [PATCH V2 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: NeilBrown <neilb@xxxxxxx>
- Re: [PATCH v2 08/11] mmc: pwrseq_simple: Add support for a delay
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v2 08/11] mmc: pwrseq_simple: Add support for a delay
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V2 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH V2 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: Mark Rutland <mark.rutland@xxxxxxx>
- [PATCH v2 08/11] mmc: pwrseq_simple: Add support for a delay
- From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
- Re: [RFC 0/3] mmc: Add dynamic frequency scaling
- From: Tomeu Vizoso <tomeu@xxxxxxxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH 3/5] mmc: card: Add eMMC command queuing support in mmc block layer
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 2/5] mmc: queue: initialization of command-queue support
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
- Re: [RFC 0/3] mmc: Add dynamic frequency scaling
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [RFC 0/3] mmc: Add dynamic frequency scaling
- From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
- Re: [PATCH 1/5] mmc: core: Add support to read command queue parameters
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [GIT PULL] MMC fixes for v.3.19, take 3
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [RFC 0/3] mmc: Add dynamic frequency scaling
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v4 0/2] mmc: dw_mmc: exynos: Add HS400 support
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH v4 0/2] mmc: dw_mmc: exynos: Add HS400 support
- From: Kukjin Kim <kgene@xxxxxxxxxx>
- Re: [PATCH v4 0/2] mmc: dw_mmc: exynos: Add HS400 support
- From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
- [PATCH V2 4/4] mmc: pwrseq_simple: Add support for a reset GPIO pin
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V2 3/4] mmc: pwrseq: Initial support for the simple MMC power sequence provider
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V2 2/4] mmc: pwrseq: Document DT bindings for the simple MMC power sequence
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V2 1/4] mmc: core: Initial support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- [PATCH V2 0/4] mmc: core: Add support for MMC power sequences
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Arend van Spriel <arend@xxxxxxxxxxxx>
- Re: [PATCH 02/13] mmc: host: Add facility to support re-tuning
- From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
[Index of Archives]
[Linux Memonry Technology]
[Linux Media]
[Linux USB Devel]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite Trails]