[PATCH V2 07/11] mmc: sdhci-esdhc-imx: move all non dt probe code into one function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is an incremental fix of commit
e62bd351b("mmc: sdhci-esdhc-imx: Do not break platform data boards").

After commit 8d86e4fcccf6 ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()"),
we do not need to run the check of boarddata->wp_type/cd_type/max_bus_width
again for dt platform since those are already handled by mmc_of_parse().

Current code only exclude the checking of wp_type for dt platform which
does not make sense.

This patch moves all non dt probe code into one function.
Besides, since we only support SD3.0/eMMC HS200 for dt platform, the
support_vsel checking and ultra high speed pinctrl state are also merged
into sdhci_esdhc_imx_probe_dt.

Then we have two separately probe function for dt and non dt type.
This can make the driver probe more clearly.

Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 179 +++++++++++++++++++------------------
 1 file changed, 94 insertions(+), 85 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 4815391..10f03ee 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -878,14 +878,12 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
 static int
 sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 			 struct sdhci_host *host,
-			 struct esdhc_platform_data *boarddata)
+			 struct pltfm_imx_data *imx_data)
 {
 	struct device_node *np = pdev->dev.of_node;
+	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
 	int ret;
 
-	if (!np)
-		return -ENODEV;
-
 	if (of_get_property(np, "non-removable", NULL))
 		boarddata->cd_type = ESDHC_CD_PERMANENT;
 
@@ -917,6 +915,26 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 
 	mmc_of_parse_voltage(np, &host->ocr_mask);
 
+	/* sdr50 and sdr104 needs work on 1.8v signal voltage */
+	if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
+	    !IS_ERR(imx_data->pins_default)) {
+		imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
+						ESDHC_PINCTRL_STATE_100MHZ);
+		imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
+						ESDHC_PINCTRL_STATE_200MHZ);
+		if (IS_ERR(imx_data->pins_100mhz) ||
+				IS_ERR(imx_data->pins_200mhz)) {
+			dev_warn(mmc_dev(host->mmc),
+				"could not get ultra high speed state, work on normal mode\n");
+			/*
+			 * fall back to not support uhs by specify no 1.8v quirk
+			 */
+			host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+		}
+	} else {
+		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
+	}
+
 	/* call to generic mmc_of_parse to support additional capabilities */
 	ret = mmc_of_parse(host->mmc);
 	if (ret)
@@ -931,22 +949,85 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 static inline int
 sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 			 struct sdhci_host *host,
-			 struct esdhc_platform_data *boarddata)
+			 struct pltfm_imx_data *imx_data)
 {
 	return -ENODEV;
 }
 #endif
 
+static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev,
+			 struct sdhci_host *host,
+			 struct pltfm_imx_data *imx_data)
+{
+	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
+	int err;
+
+	if (!host->mmc->parent->platform_data) {
+		dev_err(mmc_dev(host->mmc), "no board data!\n");
+		return -EINVAL;
+	}
+
+	imx_data->boarddata = *((struct esdhc_platform_data *)
+				host->mmc->parent->platform_data);
+	/* write_protect */
+	if (boarddata->wp_type == ESDHC_WP_GPIO) {
+		err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
+		if (err) {
+			dev_err(mmc_dev(host->mmc),
+				"failed to request write-protect gpio!\n");
+			return err;
+		}
+		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+	}
+
+	/* card_detect */
+	switch (boarddata->cd_type) {
+	case ESDHC_CD_GPIO:
+		err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
+		if (err) {
+			dev_err(mmc_dev(host->mmc),
+				"failed to request card-detect gpio!\n");
+			return err;
+		}
+		/* fall through */
+
+	case ESDHC_CD_CONTROLLER:
+		/* we have a working card_detect back */
+		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+		break;
+
+	case ESDHC_CD_PERMANENT:
+		host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+		break;
+
+	case ESDHC_CD_NONE:
+		break;
+	}
+
+	switch (boarddata->max_bus_width) {
+	case 8:
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
+		break;
+	case 4:
+		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	case 1:
+	default:
+		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+		break;
+	}
+
+	return 0;
+}
+
 static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
 			of_match_device(imx_esdhc_dt_ids, &pdev->dev);
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_host *host;
-	struct esdhc_platform_data *boarddata;
 	int err;
 	struct pltfm_imx_data *imx_data;
-	bool dt = true;
 
 	host = sdhci_pltfm_init(pdev, &sdhci_esdhc_imx_pdata, 0);
 	if (IS_ERR(host))
@@ -1038,84 +1119,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
 		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
 
-	boarddata = &imx_data->boarddata;
-	if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) {
-		if (!host->mmc->parent->platform_data) {
-			dev_err(mmc_dev(host->mmc), "no board data!\n");
-			err = -EINVAL;
-			goto disable_clk;
-		}
-		imx_data->boarddata = *((struct esdhc_platform_data *)
-					host->mmc->parent->platform_data);
-		dt = false;
-	}
-	/* write_protect */
-	if (boarddata->wp_type == ESDHC_WP_GPIO && !dt) {
-		err = mmc_gpio_request_ro(host->mmc, boarddata->wp_gpio);
-		if (err) {
-			dev_err(mmc_dev(host->mmc),
-				"failed to request write-protect gpio!\n");
-			goto disable_clk;
-		}
-		host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
-	}
-
-	/* card_detect */
-	switch (boarddata->cd_type) {
-	case ESDHC_CD_GPIO:
-		if (dt)
-			break;
-		err = mmc_gpio_request_cd(host->mmc, boarddata->cd_gpio, 0);
-		if (err) {
-			dev_err(mmc_dev(host->mmc),
-				"failed to request card-detect gpio!\n");
-			goto disable_clk;
-		}
-		/* fall through */
-
-	case ESDHC_CD_CONTROLLER:
-		/* we have a working card_detect back */
-		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
-		break;
-
-	case ESDHC_CD_PERMANENT:
-		host->mmc->caps |= MMC_CAP_NONREMOVABLE;
-		break;
-
-	case ESDHC_CD_NONE:
-		break;
-	}
-
-	switch (boarddata->max_bus_width) {
-	case 8:
-		host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
-		break;
-	case 4:
-		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
-		break;
-	case 1:
-	default:
-		host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
-		break;
-	}
-
-	/* sdr50 and sdr104 needs work on 1.8v signal voltage */
-	if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
-	    !IS_ERR(imx_data->pins_default)) {
-		imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
-						ESDHC_PINCTRL_STATE_100MHZ);
-		imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
-						ESDHC_PINCTRL_STATE_200MHZ);
-		if (IS_ERR(imx_data->pins_100mhz) ||
-				IS_ERR(imx_data->pins_200mhz)) {
-			dev_warn(mmc_dev(host->mmc),
-				"could not get ultra high speed state, work on normal mode\n");
-			/* fall back to not support uhs by specify no 1.8v quirk */
-			host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
-		}
-	} else {
-		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
-	}
+	if (of_id)
+		err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
+	else
+		err = sdhci_esdhc_imx_probe_nondt(pdev, host, imx_data);
+	if (err)
+		goto disable_clk;
 
 	err = sdhci_add_host(host);
 	if (err)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux