On Mon, 2015-06-29 at 11:50 +0300, Laurent Pinchart wrote:
> Hi Ben,
>
> Thank you for the patch.
>
> On Friday 26 June 2015 16:23:30 Ben Hutchings wrote:
> > All the SHDIs can operate with either 3.3V or 1.8V signals, depending
> > on negotiation with the card.
> >
> > Implement the {get,set}_low_voltage operations and set the low-voltage
> > capability flag for the associated pins.
> >
> > Signed-off-by: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
> > ---
> > drivers/pinctrl/sh-pfc/core.c | 2 +-
> > drivers/pinctrl/sh-pfc/core.h | 1 +
> > drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 67 ++++++++++++++++++++++++++++++++-
> > 3 files changed, 68 insertions(+), 2
> > deletions(-)
> >
> > diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
> > index 7b2c9495c383..7d51f96afc9a 100644
> > --- a/drivers/pinctrl/sh-pfc/core.c
> > +++ b/drivers/pinctrl/sh-pfc/core.c
> > @@ -92,7 +92,7 @@ static int sh_pfc_map_resources(struct sh_pfc *pfc,
> > return 0;
> > }
> >
> > -static void __iomem *sh_pfc_phys_to_virt(struct sh_pfc *pfc, u32 reg)
> > +void __iomem *sh_pfc_phys_to_virt(struct sh_pfc *pfc, u32 reg)
> > {
> > struct sh_pfc_window *window;
> > phys_addr_t address = reg;
> > diff --git a/drivers/pinctrl/sh-pfc/core.h b/drivers/pinctrl/sh-pfc/core.h
> > index 6dc8a6fc2746..af355629c5d2 100644
> > --- a/drivers/pinctrl/sh-pfc/core.h
> > +++ b/drivers/pinctrl/sh-pfc/core.h
> > @@ -57,6 +57,7 @@ int sh_pfc_unregister_gpiochip(struct sh_pfc *pfc);
> > int sh_pfc_register_pinctrl(struct sh_pfc *pfc);
> > int sh_pfc_unregister_pinctrl(struct sh_pfc *pfc);
> >
> > +void __iomem *sh_pfc_phys_to_virt(struct sh_pfc *pfc, u32 address);
> > u32 sh_pfc_read_raw_reg(void __iomem *mapped_reg, unsigned int reg_width);
> > void sh_pfc_write_raw_reg(void __iomem *mapped_reg, unsigned int reg_width,
> > u32 data);
> > diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> > b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c index 22a5470889f5..38be7cbea4ca
> > 100644
> > --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> > +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> > @@ -1739,10 +1739,20 @@ static const u16 pinmux_data[] = {
> > #define PIN_NUMBER(r, c) (((r) - 'A') * 31 + (c) + 200)
> > #define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
> >
> > +#define PIN_LOW_VOLTAGE(bank, _pin, _name, sfx) \
> > + [RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_LOW_VOLTAGE
> > +
> > static const struct sh_pfc_pin pinmux_pins[] = {
> > PINMUX_GPIO_GP_ALL(),
> >
> > - /* Pins not associated with a GPIO port */
> > + /*
> > + * All pins assigned to GPIO bank 3 can be used for SD interfaces
> > + * in which case they support low voltage (1.8V) signalling.
> > + */
> > + PORT_GP_32(3, PIN_LOW_VOLTAGE, unused),
>
> Ouch. I didn't know gcc would even support initializing fields of array member
> structures separately from full initialization of the array member structure.
> Is it standard C ? Is it supported by LLVM ? I would prefer replacing
> PINMUX_GPIO_GP_ALL instead with a version that initializes the config field
> appropriately.
It appears to be defined in the C99 standard. (I only have the final
draft here, though.)
[...]
> > +static bool sdhi_get_low_voltage(struct sh_pfc *pfc, unsigned int pin)
> > +{
> > + void __iomem *mapped_reg;
> > + u32 data, mask;
> > +
> > + if (WARN(pin < RCAR_GP_PIN(3, 0) || pin > RCAR_GP_PIN(3, 31),
> > + "sdhi_get_low_voltage: invalid pin %#x", pin))
> > + return 0;
>
> If the rest of the driver behaves correctly this should never happen, right ?
Right.
> > + /* Map IOCTRL6 */
> > + mapped_reg = sh_pfc_phys_to_virt(pfc, 0xe606008c);
> > +
> > + /* Bits in IOCTRL6 are numbered in opposite order to pins */
> > + mask = 0x80000000 >> (pin & 0x1f);
> > +
> > + data = sh_pfc_read_raw_reg(mapped_reg, 32);
>
> Given that we know the register width here I would replace this with a direct
> call to ioread32(). Same for the read and write calls below.
[...]
OK.
Ben.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
