On 2015/8/3 19:17, Heiko Stübner wrote:
Hi Shawn,
Am Montag, 3. August 2015, 11:27:19 schrieb Shawn Lin:
DesignWare MMC Controller can support two types of DMA
mode: external dma and internal dma. We get a RK312x platform
integrated dw_mmc and ARM pl330 dma controller. This patch add
edmac ops to suuport these platforms. I've tested it on RK312x
platform with edmac mode and RK3288 platform with idmac mode.
Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---
Changes in v2:
- Fix typo of dev_info msg
- remove unused dmach from declaration of dw_mci_dma_slave
drivers/mmc/host/Kconfig | 24 +++++-
drivers/mmc/host/dw_mmc-pltfm.c | 4 +
drivers/mmc/host/dw_mmc.c | 169
++++++++++++++++++++++++++++++++++++++-- include/linux/mmc/dw_mmc.h |
18 ++++-
4 files changed, 205 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 6a0f9c7..2a66b08 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -607,16 +607,36 @@ config MMC_DW
help
This selects support for the Synopsys DesignWare Mobile Storage IP
block, this provides host support for SD and MMC interfaces, in both
- PIO and external DMA modes.
+ PIO, internal DMA mode and external DMA modes.
+
+choice
+ prompt "DesignWare MMC transfer mode"
+ depends on MMC_DW
+
+config MMC_DW_PIO
+ bool "Use PIO transfers only"
+ help
+ Use PIO to transfer data between memory and the hardware.
+ PIO is slower than DMA as it requires CPU instructions to
+ move the data. This has been the traditional default for
+ the DW MCI driver.
config MMC_DW_IDMAC
bool "Internal DMAC interface"
- depends on MMC_DW
help
This selects support for the internal DMAC block within the Synopsys
Designware Mobile Storage IP block. This disables the external DMA
interface.
+config MMC_DW_EDMAC
+ bool "External DMAC interface"
+ help
+ This selects support for the external DMAC block outside the Synopsys
+ Designware Mobile Storage IP block. This disables the internal DMA
+ interface.
+
+endchoice
+
more a drive-by comment:
This should definitly not be a "choice". We're in multiplatform times, where
you can have support for a multitude of socs using dw_mmc in one kernel. And
one might want to use pio, one might want to use the internal dma while
another one might want to use the external dma.
So which dma to use should definitly be decided at runtime and not at compile-
time.
Thanks for comment, Heiko.
Definitly it should be decided at runtime. So more DT-bindings' patches
should be
ACKed as well if we want to remove all the compile-time transfer mode.
Hi, Jaehoon Chung
Any suggestion?
Heiko
--
Shawn Lin
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
