tuning-step is the delay cell steps in tuning procedure. The default value of tuning-step is 1. For imx6 series usdhc, tuning procedure can be passed when the tuning-step value is 1. But imx7d usdhc need the tuning-step value as 2, otherwise it can't pass the tuning procedure. This patch add the tuning-step setting in driver, so that user can set the tuning-step value in dts. Signed-off-by: Haibo Chen <haibo.chen@xxxxxxxxxxxxx> --- drivers/mmc/host/sdhci-esdhc-imx.c | 9 +++++++++ include/linux/platform_data/mmc-esdhc-imx.h | 1 + 2 files changed, 10 insertions(+) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 763b928..f7ec66e 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -75,6 +75,7 @@ #define ESDHC_STD_TUNING_EN (1 << 24) /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ #define ESDHC_TUNING_START_TAP 0x1 +#define ESDHC_TUNING_STEP_SHIFT 16 /* pinctrl state */ #define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz" @@ -472,6 +473,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR); u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); + u32 tuning_ctrl; if (val & SDHCI_CTRL_TUNED_CLK) { v |= ESDHC_MIX_CTRL_SMPCLK_SEL; } else { @@ -482,6 +484,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) if (val & SDHCI_CTRL_EXEC_TUNING) { v |= ESDHC_MIX_CTRL_EXE_TUNE; m |= ESDHC_MIX_CTRL_FBCLK_SEL; + tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL); + tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP; + if (imx_data->boarddata.tuning_step) + tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT; + writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL); } else { v &= ~ESDHC_MIX_CTRL_EXE_TUNE; } @@ -969,6 +976,8 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, of_property_read_u32(np, "max-frequency", &boarddata->f_max); + of_property_read_u32(np, "tuning-step", &boarddata->tuning_step); + if (of_find_property(np, "no-1-8-v", NULL)) boarddata->support_vsel = false; else diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index 75f70f6..cedbf8e 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -46,5 +46,6 @@ struct esdhc_platform_data { unsigned int f_max; bool support_vsel; unsigned int delay_line; + unsigned int tuning_step; /* The delay cell steps in tuning procedure */ }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html