On 06.08.2015 16:26, Shawn Lin wrote: > 在 2015/8/6 15:08, Krzysztof Kozlowski 写道: >> On 06.08.2015 15:44, Shawn Lin wrote: >>> DesignWare MMC Controller can supports two types of DMA >>> mode: external dma and internal dma. We get a RK312x platform >>> integrated dw_mmc and ARM pl330 dma controller. This patch add >>> edmac ops to support these platforms. I've tested it on RK312x >>> platform with edmac mode and RK3288 platform with idmac mode. >>> >>> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> >>> >>> --- >>> >>> Changes in v4: >>> - remove "host->trans_mode" and use "host->use_dma" to indicate >>> transfer mode. >>> - remove all bt-bindings' changes since we don't need new properities. >>> - check transfer mode at runtime by reading HCON reg >>> - spilt defconfig changes for each sub-architecture >>> - fix the title of cover letter >> How did you fixed the title? It is still empty :) >> Subject: [RFC PATCH v4 0/9] > I mentioned that in ChangeLog-v4 but unfortunately I forgot it. > Thanks, Krzysztof. I will be more careful and add it for next version. > >> >>> - reuse some code for reducing code size >>> >>> Changes in v3: >>> - choose transfer mode at runtime >>> - remove all CONFIG_MMC_DW_IDMAC config option >>> - add supports-idmac property for some platforms >>> >>> Changes in v2: >>> - Fix typo of dev_info msg >>> - remove unused dmach from declaration of dw_mci_dma_slave >>> >>> drivers/mmc/host/Kconfig | 11 +- >>> drivers/mmc/host/dw_mmc-pltfm.c | 2 + >>> drivers/mmc/host/dw_mmc.c | 258 >>> ++++++++++++++++++++++++++++++++-------- >>> include/linux/mmc/dw_mmc.h | 27 ++++- >>> 4 files changed, 232 insertions(+), 66 deletions(-) >>> >>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig >>> index 6a0f9c7..a86c0eb 100644 >>> --- a/drivers/mmc/host/Kconfig >>> +++ b/drivers/mmc/host/Kconfig >>> @@ -607,15 +607,7 @@ config MMC_DW >>> help >>> This selects support for the Synopsys DesignWare Mobile >>> Storage IP >>> block, this provides host support for SD and MMC interfaces, >>> in both >>> - PIO and external DMA modes. >>> - >>> -config MMC_DW_IDMAC >>> - bool "Internal DMAC interface" >>> - depends on MMC_DW >>> - help >>> - This selects support for the internal DMAC block within the >>> Synopsys >>> - Designware Mobile Storage IP block. This disables the external >>> DMA >>> - interface. >>> + PIO, internal DMA mode and external DMA modes. >>> config MMC_DW_PLTFM >>> tristate "Synopsys Designware MCI Support as platform device" >>> @@ -644,7 +636,6 @@ config MMC_DW_K3 >>> tristate "K3 specific extensions for Synopsys DW Memory Card >>> Interface" >>> depends on MMC_DW >>> select MMC_DW_PLTFM >>> - select MMC_DW_IDMAC >>> help >>> This selects support for Hisilicon K3 SoC specific extensions >>> to the >>> Synopsys DesignWare Memory Card Interface driver. Select this >>> option >>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c >>> b/drivers/mmc/host/dw_mmc-pltfm.c >>> index ec6dbcd..7e1d13b 100644 >>> --- a/drivers/mmc/host/dw_mmc-pltfm.c >>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c >>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device >>> *pdev, >>> host->pdata = pdev->dev.platform_data; >>> regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>> + /* Get registers' physical base address */ >>> + host->phy_regs = (void *)(regs->start); >>> host->regs = devm_ioremap_resource(&pdev->dev, regs); >>> if (IS_ERR(host->regs)) >>> return PTR_ERR(host->regs); >>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >>> index 40e9d8e..5d6cdff 100644 >>> --- a/drivers/mmc/host/dw_mmc.c >>> +++ b/drivers/mmc/host/dw_mmc.c >>> @@ -56,7 +56,7 @@ >>> #define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */ >>> #define DW_MCI_FREQ_MIN 400000 /* unit: HZ */ >>> -#ifdef CONFIG_MMC_DW_IDMAC >>> + >>> #define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | >>> SDMMC_IDMAC_INT_NI | \ >>> SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \ >>> SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \ >>> @@ -99,7 +99,6 @@ struct idmac_desc { >>> __le32 des3; /* buffer 2 physical address */ >>> }; >>> -#endif /* CONFIG_MMC_DW_IDMAC */ >>> static bool dw_mci_reset(struct dw_mci *host); >>> static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); >>> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data) >>> return DMA_FROM_DEVICE; >>> } >>> -#ifdef CONFIG_MMC_DW_IDMAC >>> static void dw_mci_dma_cleanup(struct dw_mci *host) >>> { >>> struct mmc_data *data = host->data; >>> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci >>> *host) >>> mci_writel(host, BMOD, temp); >>> } >>> -static void dw_mci_idmac_complete_dma(struct dw_mci *host) >>> +static void dw_mci_dmac_complete_dma(void *arg) >>> { >>> + struct dw_mci *host = arg; >> Why changing the argument to void*? > > This function will be used as callback hook of dmaengine, and the > prototype is > "typedef void (*dma_async_tx_callback)(void *dma_async_param);". > w/o this change, we meet a warning for incompatible pointer case. Thanks for clarifying. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html