Linux LEDS Development
[Prev Page][Next Page]
- [PATCH v5 2/2] leds: lm3601x: Introduce the lm3601x LED driver, (continued)
- [PATCH v4 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver,
Dan Murphy
- [PATCH v3 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver,
Dan Murphy
- [PATCH] leds: lm3601x: fix semicolon.cocci warnings,
Julia Lawall
- [PATCH v3 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation,
Baolin Wang
- [PATCH v2 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver,
Dan Murphy
- [PATCH v3 0/3] led_trigger_register_format and tty triggers,
Uwe Kleine-König
- [PATCH v2 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation,
Baolin Wang
- [PATCH 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver,
Dan Murphy
- [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation,
Baolin Wang
- [PATCH v1] leds: wm831x-status: Use sysfs_match_string() helper,
Andy Shevchenko
- [PATCH V2 0/5] backlight: qcom-wled: Support for QCOM wled driver,
Kiran Gunda
- [PATCH V1 0/5] backlight: qcom-wled: Support for QCOM wled driver,
Kiran Gunda
- [RFC PATCH 0/3] UP Squared board drivers,
Javier Arteaga
- [RFC PATCH RESEND 0/3] UP Squared board drivers,
Javier Arteaga
- [RESEND PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye,
Enric Balletbo i Serra
- [GIT PULL] LED updates for 4.17-rc1,
Jacek Anaszewski
- Re: Potential DoS (or worse?) between 2.6.17 and 4.7, Jacek Anaszewski
- [RESEND PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.,
Enric Balletbo i Serra
- [PATCH v6 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle.,
Enric Balletbo i Serra
- [PATCH 4.9 v2 0/2] Clear LED_BLINK_SW flag in led_blink_set(),
Jacek Anaszewski
- [PATCH v3 0/2] Panasonic AN30259A support,
Simon Shields
- Re: [PATCH 4.4 16/34] led: core: Fix brightness setting when setting delay_off=0,
Ben Hutchings
- [PATCH v2 0/2] Panasonic AN30259A support,
Simon Shields
- [PATCH] leds: fix wrong dmi_match on PC Engines APU LEDs,
Hans Ulli Kroll
- A case of watchdog+LED shared GPIO pin,
Ильяс Гасанов
- Re: [PATCH v12] ath10k: add LED and GPIO controlling support for various chipsets,
Rafał Miłecki
- [PATCH] leds: Extends disk trigger for reads and writes,
Linus Walleij
- [PATCH v3 00/10] extend PWM framework to support PWM modes,
Claudiu Beznea
- [PATCH v3 01/10] pwm: extend PWM framework with PWM modes, Claudiu Beznea
- [PATCH v3 02/10] pwm: clps711x: populate PWM mode in of_xlate function, Claudiu Beznea
- [PATCH v3 03/10] pwm: cros-ec: populate PWM mode in of_xlate function, Claudiu Beznea
- [PATCH v3 04/10] pwm: pxa: populate PWM mode in of_xlate function, Claudiu Beznea
- [PATCH v3 05/10] pwm: add PWM mode to pwm_config(), Claudiu Beznea
- [PATCH v3 06/10] pwm: add PWM modes, Claudiu Beznea
- [PATCH v3 07/10] pwm: atmel: add pwm capabilities, Claudiu Beznea
- [PATCH v3 08/10] pwm: add push-pull mode support, Claudiu Beznea
- [PATCH v3 09/10] pwm: add documentation for pwm push-pull mode, Claudiu Beznea
- [PATCH v3 10/10] pwm: atmel: add push-pull mode support, Claudiu Beznea
- [PATCH v4 0/2] leds: Add driver for NCP5623 3-channel I2C LED driver,
Florian Vaussard
- [PATCH 0/2] Panasonic AN30259A support,
Simon Shields
- [GIT PULL] LED update for 4.16-rc3, Jacek Anaszewski
- [PATCH] MAINTAINERS: Remove Richard Purdie from LED maintainers,
Jacek Anaszewski
- [PATCH v9 2/2] leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform,
Vadim Pasternak
- [PATCH v8 0/2] Introduce mlxreg LED driver,
Vadim Pasternak
- [PATCH] leds: Add more product/board names for PC Engines APU2,
Timothy Redaelli
- [PATCH v7 0/2] Introduce mlxreg LED driver,
Vadim Pasternak
- [patch v6 0/1] Introduce smlxreg LED driver,
Vadim Pasternak
- [PATCH v3 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye,
Enric Balletbo i Serra
- [PATCH v2 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye,
Enric Balletbo i Serra
- Migrate documentation for LED subsystem to ReStructured text?,
Matthias Schmitz
- [PATCH AUTOSEL for 4.14 065/110] led: core: Fix brightness setting when setting delay_off=0,
Sasha Levin
- [PATCH AUTOSEL for 4.9 28/52] led: core: Fix brightness setting when setting delay_off=0,
Sasha Levin
- [PATCH AUTOSEL for 4.4 15/32] led: core: Fix brightness setting when setting delay_off=0, Sasha Levin
- [PATCH AUTOSEL for 3.18 11/24] led: core: Fix brightness setting when setting delay_off=0, Sasha Levin
- [PATCH 1/1] leds: leds-mlxcpld: Allow compilation for 32 bit arch,
Vadim Pasternak
- [PATCH] leds: use QoS to control LED suspend behavior from userspace,
0v3rdr0n3
- [GIT PULL] LED updates for 4.16-rc1, Jacek Anaszewski
- [PATCH v1] leds: Clarify supported chips by LM355x driver,
Andy Shevchenko
- [PATCH] led: core: Fix race on software blink cancellation,
Jacek Anaszewski
- [PATCH v2] leds: ledtrig-transient: Add SPDX license identifiers,
Shuah Khan
- [PATCH 0/4] backlight: pwm_bl: support linear interpolation and brightness to human eye,
Enric Balletbo i Serra
- [PATCH] leds: ledtrig-transient: Add SPDX license identifiers,
Shuah Khan
- [GIT PULL] LED fix for 4.15-rc7, Jacek Anaszewski
- [PATCH] leds: core: Fix regression caused by commit 2b83ff96f51d, Jacek Anaszewski
- Add driver for MCP45HV51 (digital potentiometer),
Gaëtan Carlier
- proper framework for meter sink?,
Oleksij Rempel
- [GIT PULL] LED fix for 4.15-rc6, Jacek Anaszewski
- [PATCH v5 1/6] dt: bindings: lp8860: Update bindings for lp8860,
Dan Murphy
- [PATCH v2 1/2] leds: as3645a: Fix quoted string split warning,
Dan Murphy
- [PATCH v4 0/6] Updated LP8860 driver series,
Dan Murphy
- [PATCH] leds: as3645a: Fix checkpatch warnings,
Dan Murphy
- [RFC PATCH 1/2] dt: bindings: as3645a: Update dt node example with standard,
Dan Murphy
- [PATCH v3 0/6] Updated LP8860 driver series,
Dan Murphy
- [PATCH v11 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver,
Dan Murphy
- [PATCH v10 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver,
Dan Murphy
- [PATCH] led: core: Fix brightness setting when setting active_off=0,
Matthieu CASTET
- [PATCH v9 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver,
Dan Murphy
- [PATCH v5] leds: trigger: Introduce a NETDEV trigger,
Ben Whitten
- [PATCH v4] leds: trigger: Introduce a NETDEV trigger,
Ben Whitten
- [RESEND PATCH v2] dt: bindings: as3645a: Fix the example node,
Dan Murphy
- [PATCH v2] dt: bindings: as3645a: Fix the example node,
Dan Murphy
- [PATCH v3] leds: trigger: Introduce a NETDEV trigger,
Ben Whitten
- [PATCH v8 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver,
Dan Murphy
- [PATCH v2 0/6] Updated lp8860 led driver,
Dan Murphy
- [PATCH] dt: bindings: as3645a: Fix the example node,
Dan Murphy
- [PATCH/RFC v2] leds: trigger: Introduce a NETDEV trigger,
Ben Whitten
- [PATCH 0/5] Numerous fixes for LP8860,
Dan Murphy
- [PATCH v7 1/2] dt: bindings: lm3692x: Add bindings for lm3692x LED driver,
Dan Murphy
- [PATCH] leds: blinkm: avoid uninitialized data use,
Arnd Bergmann
[Index of Archives]
[Linux Kernel Development]
[Security]
[Linux ARM Kernel]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Fedora ARM]