Hi Vadim,
Thanks for the update.
On 02/12/2018 09:15 PM, Vadim Pasternak wrote:
> Driver obtains LED devices according to system configuration and creates
> devices in form: "devicename:color:function", like
> The full path is to be:
> /sys/class/leds/mlxreg\:status\:amber/brightness
> After timer trigger activation:
> echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger
> Attributes for LED blinking will appaer in sysfs infrastructure:
> /sys/class/leds/mlxreg\:status\:amber/delay_off
> /sys/class/leds/mlxreg\:status\:amber/delay_on
>
> LED setting is controlled through the on-board programmable devices,
> which exports its register map. This device could be attached to any
> bus type, for which register mapping is supported.
>
> Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> Acked-by: Pavel Machek <pavel@xxxxxx>
> ---
> v5->v6
> Changes added by Vadim:
> - Change year to 2018 in Copyright;
> - Change structure mlxreg_core_led_platform_data name to common name
> mlxreg_core_platform_data, as it has been pushed to
> git://git.infradead.org/linux-platform-drivers-x86.git to branch,
> commit 1f976f6978bf6156ce822eb279ac86c519b10329 (1f976f6), file
> include/linux/platform_data/mlxreg.h
> - Add orange color, as alternative to red (some systems use orange,
> instead of red);
> - Drop mlxreg_led_dt_match, since the driver is to be activated by another
> common Mellanox platform driver, mlx-platform or mlx-platform-of;
> v4->v5
> Comments pointed out by Jacek:
> - Make consistent naming in mlxreg_led_brightness_set,
> mlxreg_led_brightness_get, mlxreg_led_config;
> - Remove unnecessary data assignment in mlxreg_led_config;
> Changes added by Vadim:
> - Add internal structure mlxreg_led_data to leds-mlxreg.c;
> v3->v4
> Comments pointed out by Jacek:
> - add led in declaration mlxreg_led_store_hw and mlxreg_led_get_hw;
> - rearrange local variables names in mlxreg_led_config;
> Comments pointed out by Pavel:
> - replace _HALF/_FULL with BLINK_3HZ/BLINK_6HZ;
> - in mlxreg_led_get_hw just return after access error;
> - explicit check for green led is not added, since control device can be
> programmed for blue LED and this case it reuses masks of green LED.
> v2->v3:
> Comments pointed out by Jacek:
> - fix order in includes;
> - add declaration pdata in mlxreg_led_store_hw and mlxreg_led_get_hw;
> - add declaration of led_data in mlxreg_led_config;
> - use LED_ON in assignment instead of 1;
> - fix mutex call in mlxreg_led_remove;
> v1->v2:
> Comments pointed out by Jacek:
> - remove macros MLXREG_MAP and MLXREG_CDEV;
> - brightness_set_blocking insteaf of brightness_set, this fix allows
> removing of context validation and workqueue and also three fields from
> struct mlxreg_core_led_data in mlxreg.h;
> - remove MLXREG_LED_NAME;
> - extend Kconfig description;
> Changes added by Vadim:
> - remove unnecessary includes after dropping workqueue;
> ---
> MAINTAINERS | 1 +
> drivers/leds/Kconfig | 10 ++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-mlxreg.c | 311 +++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 323 insertions(+)
> create mode 100644 drivers/leds/leds-mlxreg.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 95c3fa1..96625b2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8916,6 +8916,7 @@ M: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> L: linux-leds@xxxxxxxxxxxxxxx
> S: Supported
> F: drivers/leds/leds-mlxcpld.c
> +F: drivers/leds/leds-mlxreg.c
> F: Documentation/leds/leds-mlxcpld.txt
>
> MELLANOX PLATFORM DRIVER
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 3e763d2..c98abe1 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -694,6 +694,16 @@ config LEDS_MLXCPLD
> This option enabled support for the LEDs on the Mellanox
> boards. Say Y to enabled these.
>
> +config LEDS_MLXREG
> + tristate "LED support for the Mellanox switches management control"
> + depends on LEDS_CLASS
> + help
> + This option enabled support for the LEDs on the Mellanox Ethernet and
s/enabled/enables/
Just noticed that we have the same typo in two other places in this
Kconfig.
> + InfiniBand switches. The driver can be activated from the device tree
You don't seem to use OF API in the driver.
> + or by the direct platform device add call.
Could you please explain how it is supposed to work? Who is responsible
for regmap initialization? Do you plan on adding corresponding
platform_data to drivers/platform/x86/mlx-platform.c or so?
> Say Y to enabled these. To
> + compile this driver as a module, choose 'M' here: the module will be
> + called leds-mlxreg.
> +
> config LEDS_USER
> tristate "Userspace LED support"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 987884a..91eca81 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -72,6 +72,7 @@ obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o
> obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
> obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
> obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
> +obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
> obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
> obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
> obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
> diff --git a/drivers/leds/leds-mlxreg.c b/drivers/leds/leds-mlxreg.c
> new file mode 100644
> index 0000000..4dd2bd8
> --- /dev/null
> +++ b/drivers/leds/leds-mlxreg.c
> @@ -0,0 +1,311 @@
> +/*
> + * Copyright (c) 2018 Mellanox Technologies. All rights reserved.
> + * Copyright (c) 2018 Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are met:
> + *
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + * 3. Neither the names of the copyright holders nor the names of its
> + * contributors may be used to endorse or promote products derived from
> + * this software without specific prior written permission.
> + *
> + * Alternatively, this software may be distributed under the terms of the
> + * GNU General Public License ("GPL") version 2 as published by the Free
> + * Software Foundation.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
> + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
> + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
> + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
> + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
> + * POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_data/mlxreg.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +/* Codes for LEDs. */
> +#define MLXREG_LED_OFFSET_BLINK_3HZ 0x01 /* Offset from solid: 3Hz blink */
> +#define MLXREG_LED_OFFSET_BLINK_6HZ 0x02 /* Offset from solid: 6Hz blink */
> +#define MLXREG_LED_IS_OFF 0x00 /* Off */
> +#define MLXREG_LED_RED_SOLID 0x05 /* Solid red */
> +#define MLXREG_LED_GREEN_SOLID 0x0D /* Solid green */
> +#define MLXREG_LED_AMBER_SOLID 0x09 /* Solid amber */
> +#define MLXREG_LED_BLINK_3HZ 167 /* ~167 msec off/on - HW support */
> +#define MLXREG_LED_BLINK_6HZ 83 /* ~83 msec off/on - HW support */
> +
> +/**
> + * struct mlxreg_led_data - led control data:
> + *
> + * @data: led configuration data;
> + * @led_classdev: led class data;
> + * @base_color: base led color (other colors have constant offset from base);
> + * @led_data: led data;
> + * @data_parent: pointer to private device control data of parent;
> + */
> +struct mlxreg_led_data {
> + struct mlxreg_core_data *data;
> + struct led_classdev led_cdev;
> + u8 base_color;
> + void *data_parent;
> + char led_cdev_name[MLXREG_CORE_LABEL_MAX_SIZE];
> +};
> +
> +#define cdev_to_priv(c) container_of(c, struct mlxreg_led_data, led_cdev)
> +
> +/**
> + * struct mlxreg_led_priv_data - platform private data:
> + *
> + * @pdev: platform device;
> + * @pdata: platform data;
> + * @access_lock: mutex for attribute IO access;
> + */
> +struct mlxreg_led_priv_data {
> + struct platform_device *pdev;
> + struct mlxreg_core_platform_data *pdata;
> + struct mutex access_lock; /* protect IO operations */
> +};
> +
> +static int
> +mlxreg_led_store_hw(struct mlxreg_led_data *led_data, u8 vset)
> +{
> + struct mlxreg_led_priv_data *priv = led_data->data_parent;
> + struct mlxreg_core_platform_data *led_pdata = priv->pdata;
> + struct mlxreg_core_data *data = led_data->data;
> + u32 regval;
> + u32 nib;
> + int ret;
> +
> + /*
> + * Each LED is controlled through low or high nibble of the relevant
> + * register byte. Register offset is specified by off parameter.
> + * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> + * green.
> + * Parameter mask specifies which nibble is used for specific LED: mask
> + * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> + * higher nibble (bits from 4 to 7).
> + */
> + mutex_lock(&priv->access_lock);
> +
> + ret = regmap_read(led_pdata->regmap, data->reg, ®val);
> + if (ret)
> + goto access_error;
> +
> + nib = (ror32(data->mask, data->bit) == 0xf0) ? rol32(vset, data->bit) :
> + rol32(vset, data->bit + 4);
> + regval = (regval & data->mask) | nib;
> +
> + ret = regmap_write(led_pdata->regmap, data->reg, regval);
> +
> +access_error:
> + mutex_unlock(&priv->access_lock);
> +
> + return ret;
> +}
> +
> +static enum led_brightness
> +mlxreg_led_get_hw(struct mlxreg_led_data *led_data)
> +{
> + struct mlxreg_led_priv_data *priv = led_data->data_parent;
> + struct mlxreg_core_platform_data *led_pdata = priv->pdata;
> + struct mlxreg_core_data *data = led_data->data;
> + u32 regval;
> + int ret;
> +
> + /*
> + * Each LED is controlled through low or high nibble of the relevant
> + * register byte. Register offset is specified by off parameter.
> + * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
> + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
> + * green.
> + * Parameter mask specifies which nibble is used for specific LED: mask
> + * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
> + * higher nibble (bits from 4 to 7).
> + */
> + ret = regmap_read(led_pdata->regmap, data->reg, ®val);
> + if (ret < 0) {
> + dev_warn(led_data->led_cdev.dev, "Failed to get current brightness, error: %d\n",
> + ret);
> + /* Assume the LED is OFF */
> + return LED_OFF;
> + }
> +
> + regval = regval & ~data->mask;
> + regval = (ror32(data->mask, data->bit) == 0xf0) ? ror32(regval,
> + data->bit) : ror32(regval, data->bit + 4);
> + if (regval >= led_data->base_color &&
> + regval <= (led_data->base_color + MLXREG_LED_OFFSET_BLINK_6HZ))
> + ret = LED_FULL;
> + else
> + ret = LED_OFF;
> +
> + return ret;
> +}
> +
> +static int
> +mlxreg_led_brightness_set(struct led_classdev *cled, enum led_brightness value)
> +{
> + struct mlxreg_led_data *led_data = cdev_to_priv(cled);
> +
> + if (value)
> + return mlxreg_led_store_hw(led_data, led_data->base_color);
> + else
> + return mlxreg_led_store_hw(led_data, MLXREG_LED_IS_OFF);
> +}
> +
> +static enum led_brightness
> +mlxreg_led_brightness_get(struct led_classdev *cled)
> +{
> + struct mlxreg_led_data *led_data = cdev_to_priv(cled);
> +
> + return mlxreg_led_get_hw(led_data);
> +}
> +
> +static int
> +mlxreg_led_blink_set(struct led_classdev *cled, unsigned long *delay_on,
> + unsigned long *delay_off)
> +{
> + struct mlxreg_led_data *led_data = cdev_to_priv(cled);
> + int err;
> +
> + /*
> + * HW supports two types of blinking: full (6Hz) and half (3Hz).
> + * For delay on/off zero LED is setting to solid color. For others
> + * combination blinking is to be controlled by the software timer.
> + */
> + if (!(*delay_on == 0 && *delay_off == 0) &&
> + !(*delay_on == MLXREG_LED_BLINK_3HZ &&
> + *delay_off == MLXREG_LED_BLINK_3HZ) &&
> + !(*delay_on == MLXREG_LED_BLINK_6HZ &&
> + *delay_off == MLXREG_LED_BLINK_6HZ))
> + return -EINVAL;
> +
> + if (*delay_on == MLXREG_LED_BLINK_6HZ)
> + err = mlxreg_led_store_hw(led_data, led_data->base_color +
> + MLXREG_LED_OFFSET_BLINK_6HZ);
> + else if (*delay_on == MLXREG_LED_BLINK_3HZ)
> + err = mlxreg_led_store_hw(led_data, led_data->base_color +
> + MLXREG_LED_OFFSET_BLINK_3HZ);
> + else
> + err = mlxreg_led_store_hw(led_data, led_data->base_color);
> +
> + return err;
> +}
> +
> +static int mlxreg_led_config(struct mlxreg_led_priv_data *priv)
> +{
> + struct mlxreg_core_platform_data *led_pdata = priv->pdata;
> + struct mlxreg_core_data *data = led_pdata->data;
> + struct mlxreg_led_data *led_data;
> + struct led_classdev *led_cdev;
> + int brightness;
> + int i;
> + int err;
> +
> + for (i = 0; i < led_pdata->counter; i++, data++) {
> + led_data = devm_kzalloc(&priv->pdev->dev, sizeof(*led_data),
> + GFP_KERNEL);
> + if (!led_data)
> + return -ENOMEM;
> +
> + led_cdev = &led_data->led_cdev;
> + led_data->data_parent = priv;
> + if (strstr(data->label, "red") ||
> + strstr(data->label, "orange")) {
> + brightness = LED_OFF;
> + led_data->base_color = MLXREG_LED_RED_SOLID;
> + } else if (strstr(data->label, "amber")) {
> + brightness = LED_OFF;
> + led_data->base_color = MLXREG_LED_AMBER_SOLID;
> + } else {
> + brightness = LED_OFF;
> + led_data->base_color = MLXREG_LED_GREEN_SOLID;
> + }
> + sprintf(led_data->led_cdev_name, "%s:%s", "mlxreg",
> + data->label);
> + led_cdev->name = led_data->led_cdev_name;
> + led_cdev->brightness = brightness;
> + led_cdev->max_brightness = LED_ON;
> + led_cdev->brightness_set_blocking =
> + mlxreg_led_brightness_set;
> + led_cdev->brightness_get = mlxreg_led_brightness_get;
> + led_cdev->blink_set = mlxreg_led_blink_set;
> + led_cdev->flags = LED_CORE_SUSPENDRESUME;
> + led_data->data = data;
> + err = devm_led_classdev_register(&priv->pdev->dev, led_cdev);
> + if (err)
> + return err;
> +
> + if (led_cdev->brightness)
> + mlxreg_led_brightness_set(led_cdev,
> + led_cdev->brightness);
> + dev_info(led_cdev->dev, "label: %s, mask: 0x%02x, offset:0x%02x\n",
> + data->label, data->mask, data->reg);
> + }
> +
> + return 0;
> +}
> +
> +static int mlxreg_led_probe(struct platform_device *pdev)
> +{
> + struct mlxreg_core_platform_data *led_pdata;
> + struct mlxreg_led_priv_data *priv;
> +
> + led_pdata = dev_get_platdata(&pdev->dev);
> + if (!led_pdata) {
> + dev_err(&pdev->dev, "Failed to get platform data.\n");
> + return -EINVAL;
> + }
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + mutex_init(&priv->access_lock);
> + priv->pdev = pdev;
> + priv->pdata = led_pdata;
> +
> + return mlxreg_led_config(priv);
> +}
> +
> +static int mlxreg_led_remove(struct platform_device *pdev)
> +{
> + struct mlxreg_led_priv_data *priv = dev_get_drvdata(&pdev->dev);
> +
> + mutex_destroy(&priv->access_lock);
> +
> + return 0;
> +}
> +
> +static struct platform_driver mlxreg_led_driver = {
> + .driver = {
> + .name = "leds-mlxreg",
> + },
> + .probe = mlxreg_led_probe,
> + .remove = mlxreg_led_remove,
> +};
> +
> +module_platform_driver(mlxreg_led_driver);
> +
> +MODULE_AUTHOR("Vadim Pasternak <vadimp@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Mellanox LED regmap driver");
> +MODULE_LICENSE("Dual BSD/GPL");
> +MODULE_ALIAS("platform:leds-mlxreg");
>
--
Best regards,
Jacek Anaszewski
