Update the lp8860 bindings to fix various issues
found. Add address-cells and size-cells, rename
enable-gpio to enable-gpios, update the node name
to the device name and indent the node example.
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
v2 - New patch
.../devicetree/bindings/leds/leds-lp8860.txt | 28 ++++++++++++----------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index aad38dd94d4b..1b2fab05ec6a 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -6,24 +6,28 @@ current sinks that can be controlled by a PWM input
signal, a SPI/I2C master, or both.
Required properties:
- - compatible:
+ - compatible :
"ti,lp8860"
- - reg - I2C slave address
- - label - Used for naming LEDs
+ - reg : I2C slave address
+ - label : Used for naming LEDs
+ - #address-cells : 1
+ - #size-cells : 0
Optional properties:
- - enable-gpio - gpio pin to enable/disable the device.
- - supply - "vled" - LED supply
+ - enable-gpios : gpio pin to enable/disable the device.
+ - supply : "vled" - LED supply
Example:
-leds: leds@6 {
- compatible = "ti,lp8860";
- reg = <0x2d>;
- label = "display_cluster";
- enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- vled-supply = <&vbatt>;
-}
+ lp8860@2d {
+ compatible = "ti,lp8860";
+ #address-cells: 1
+ #size-cells: 0
+ reg = <0x2d>;
+ label = "display_cluster";
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+ }
For more product information please see the link below:
http://www.ti.com/product/lp8860-q1
--
2.15.0.124.g7668cbc60
