Linux Initial RAM Filesystem
[Prev Page][Next Page]
- [PATCH] Set IP options on bridge and vlan interface
- From: Kevin Yung <Kevin.Yung@xxxxxxxx>
- [PATCH] set peer for point-to-point connections
- From: Dan Horák <dan@xxxxxxxx>
- Re: Out of tree drivers missing from initramfs
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: Out of tree drivers missing from initramfs
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Re: [PATCH 4/6] rootfs-block: Support lilo style device numbers.
- From: Colin Guthrie <colin@xxxxxxxxxx>
- Re: [PATCH 4/6] rootfs-block: Support lilo style device numbers.
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 5/6] i18n: Run console_init prior to udev startup.
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 2/6] lvm: Ensure LVM is initialised in non-hostonly mode.
- From: Colin Guthrie <colin@xxxxxxxx>
- Re: [PATCH 2/6] lvm: Ensure LVM is initialised in non-hostonly mode.
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/6] dm/md: Only include UUIDs once in the command line.
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/3] Add an exception handle check function
- From: Baoquan <bhe@xxxxxxxxxx>
- Patch
- From: Kevin Yung <kevin.yung@xxxxxxxx>
- Patch for ip setting on bridge interface and vlan
- From: Kevin Yung <kevin.yung@xxxxxxxx>
- [PATCH 3/6] resume: Ensure we remove the timout job when we find the resume device
- From: Colin Guthrie <colin@xxxxxxxxxx>
- [PATCH 6/6] kernel-modules: Add ehci support for kernel 3.8+
- From: Colin Guthrie <colin@xxxxxxxxxx>
- [PATCH 5/6] i18n: Run console_init prior to udev startup.
- From: Colin Guthrie <colin@xxxxxxxxxx>
- [PATCH 1/6] dm/md: Only include UUIDs once in the command line.
- From: Colin Guthrie <colin@xxxxxxxxxx>
- [PATCH 2/6] lvm: Ensure LVM is initialised in non-hostonly mode.
- From: Colin Guthrie <colin@xxxxxxxxxx>
- [PATCH 4/6] rootfs-block: Support lilo style device numbers.
- From: Colin Guthrie <colin@xxxxxxxxxx>
- Various patches applied on Mageia that might be good for upstream
- From: Colin Guthrie <colin@xxxxxxxxxx>
- Re: [PATCH 2/2] gentoo.conf: let udevdir= be handled by pkg-config and use udevaltdirs
- From: Colin Guthrie <gmane@xxxxxxxxxxxxxx>
- [PATCH 2/2] gentoo.conf: let udevdir= be handled by pkg-config and use udevaltdirs
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/2] dracut-functions.sh: support for alternative udev dirs - udevaltdirs
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: Out of tree drivers missing from initramfs
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [ANNOUNCE] dracut-025
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: Out of tree drivers missing from initramfs
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Out of tree drivers missing from initramfs
- From: Joe Lawrence <Joe.Lawrence@xxxxxxxxxxx>
- Re: [PATCH] Extend 52f1b041 to allow devices to be specified in config files as well as cmdline.
- From: Harald Hoyer <harald@xxxxxxxxxxxxxxx>
- Re: [patch dracut v2] fix teamd exec in case config does not include devname
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] use linkup in dhclient-script.sh
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 2/2 V4] Add memory usage trace to diffrent hook points
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/2 V3] add function getargnum
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] Extend 52f1b041 to allow devices to be specified in config files as well as cmdline.
- From: Colin Guthrie <colin@xxxxxxxxxx>
- Re: [PATCH 1/3] Add an exception handle check function
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 2/2 V4] Add memory usage trace to diffrent hook points
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 2/2 V3] Add memory usage trace to diffrent hook points
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/3] Add an exception handle check function
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 2/2 V3] Add memory usage trace to diffrent hook points
- [PATCH 1/2 V3] add function getargnum
- [PATCH 0/2 V3] memory usage tracing update
- Re: [PATCH 1/3] Add an exception handle check function
- From: Baoquan <bhe@xxxxxxxxxx>
- Re: [PATCH 2/2 v2] Add memory usage trace to diffrent hook points
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 1/2] add function getargnum
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 2/2] gentoo.conf: let udevdir= be handled by pkg-config and use udevaltdirs
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/2] dracut-functions.sh: support for alternative udev dirs - udevaltdirs
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: [PATCH 2/2 v2] Add memory usage trace to diffrent hook points
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/2] add function getargnum
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 2/2 v2] Add memory usage trace to diffrent hook points
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch dracut v2] fix teamd exec in case config does not include devname
- From: Cong Wang <amwang@xxxxxxxxxx>
- [patch dracut v2] fix teamd exec in case config does not include devname
- From: Jiri Pirko <jiri@xxxxxxxxxxx>
- [patch dracut] fix teamd exec in case config does not include devname
- From: Jiri Pirko <jiri@xxxxxxxxxxx>
- [PATCH] use linkup in dhclient-script.sh
- From: dave@xxxxxxxxxx (Dave Young)
- Re: [PATCH 3/3] Add a special handler when mount rootfs failed
- From: Baoquan <bhe@xxxxxxxxxx>
- Re: [PATCH 1/3] Add an exception handle check function
- From: Baoquan <bhe@xxxxxxxxxx>
- [PATCH 3/3] Add a special handler when mount rootfs failed
- From: Baoquan He <bhe@xxxxxxxxxx>
- [PATCH 2/3] Specify a special handler when initqueue timeout
- From: Baoquan He <bhe@xxxxxxxxxx>
- [PATCH 1/3] Add an exception handle check function
- From: Baoquan He <bhe@xxxxxxxxxx>
- [PATCH 2/2] gentoo.conf: let udevdir= be handled by pkg-config and use udevaltdirs
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/2] dracut-functions.sh: support for alternative udev dirs - udevaltdirs
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: [RFC] iscsid / systemd / dracut integration effort
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- [PATCH v2] dracut: add team device support
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [systemd-devel] [RFC] iscsid / systemd / dracut integration effort
- From: Andy Grover <agrover@xxxxxxxxxx>
- Re: [systemd-devel] [RFC] iscsid / systemd / dracut integration effort
- From: Tomasz Torcz <tomek@xxxxxxxxxxxxxx>
- [PATCH] network: support multiple bonding interfaces
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [patch 6/6 v3] Wait for interface up at the early stage
- [patch 5/6 v3] Get ifaces for udev rule use
- [patch 4/6 v3] Wait for link ready before use the interface
- [patch 3/6 v3] Change to use linkup function in network scripts
- [patch 2/6 v3] Add function linkup
- [patch 1/6 v3] Move wait for if functions to net lib
- [patch 0/6 v3] network fixes for link waiting
- Re: [systemd-devel] [RFC] iscsid / systemd / dracut integration effort
- From: "Jóhann B. Guðmundsson" <johannbg@xxxxxxxxx>
- Re: [systemd-devel] [RFC] iscsid / systemd / dracut integration effort
- From: Chris Leech <cleech@xxxxxxxxxx>
- Re: [RFC] iscsi unit files and helper script
- From: Chris Leech <cleech@xxxxxxxxxx>
- Re: [RFC] iscsi unit files and helper script
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [systemd-devel] [RFC] iscsid / systemd / dracut integration effort
- From: "Jóhann B. Guðmundsson" <johannbg@xxxxxxxxx>
- [RFC] iscsid / systemd / dracut integration effort
- From: Chris Leech <cleech@xxxxxxxxxx>
- [RFC] dracut iscsi module: early attempt to launch iscsid from the initramfs
- From: Chris Leech <cleech@xxxxxxxxxx>
- [RFC] iscsi unit files and helper script
- From: Chris Leech <cleech@xxxxxxxxxx>
- [RFC] iscsiadm, iscsid: newroot command to survive switch_root
- From: Chris Leech <cleech@xxxxxxxxxx>
- [RFC] iscsid: add --initrd option to set run from initrd hint for systemd
- From: Chris Leech <cleech@xxxxxxxxxx>
- dracut allow-discards, remaining issue
- From: Robert Buchholz <robert.buchholz@xxxxxxxxxxxx>
- Re: Firmware assisted dump support in dracut
- From: Mahesh Jagannath Salgaonkar <mahesh@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Jiri Pirko <jiri@xxxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 1/2] dracut: add team device support
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: Firmware assisted dump support in dracut
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [patch 6/6 v2] Wait for interface up at the early stage
- [patch 5/6 v2] Get failsafe ifaces for udev rule use
- [patch 3/6 v2] Change to use linkup function in network scripts
- [patch 4/6 v2] Wait for link ready before use the interface
- [patch 2/6 v2] Add function linkup
- [patch 1/6 v2] Move wait for if functions to net lib
- [patch 0/6 v2] network fixes for link waiting
- Re: Firmware assisted dump support in dracut
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [patch RFC 6/6] Wait for interface up at the early stage
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch RFC 5/6] Get ifaces for udev rule use
- From: Dave Young <dyoung@xxxxxxxxxx>
- Firmware assisted dump support in dracut
- From: Mahesh J Salgaonkar <mahesh@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/2 v2] Add memory usage trace to diffrent hook points
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 1/2 v2] add function getargnum
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 2/2] Add memory usage trace to diffrent hook points
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 1/2] add function getargnum
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 2/2] Add memory usage trace to diffrent hook points
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [PATCH 1/2] add function getargnum
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [PATCH 2/2] Add memory usage trace to diffrent hook points
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 1/2] add function getargnum
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: NBD boot problem
- From: Wim Muskee <wimmuskee@xxxxxxxxx>
- [PATCH 2/2] dracut: document team cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 1/2] dracut: add team device support
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [patch RFC 0/6] network fixes for link waiting
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch RFC 0/6] network fixes for link waiting
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [patch RFC 0/6] network fixes for link waiting
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH] split plymouth module
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch RFC 5/6 resend] Get ifaces for udev rule use
- From: Dave Young <dyoung@xxxxxxxxxx>
- [patch RFC 5/6] Get ifaces for udev rule use
- [patch RFC 5/6 resend] Get ifaces for udev rule use
- From: Dave Young <dyoung@xxxxxxxxxx>
- [patch RFC 0/6] network fixes for link waiting
- Re: [patch RFC 1/6] Move wait for if functions to net lib
- From: Dave Young <dyoung@xxxxxxxxxx>
- [patch RFC 2/6] Add function linkup
- [patch RFC 6/6] Wait for interface up at the early stage
- [patch RFC 1/6] Move wait for if functions to net lib
- [patch RFC 3/6] Change to use linkup function in network scripts
- [patch RFC 4/6] Wait for link ready before use the interface
- [PATCH] Fix rd.blacklist.driver when no /etc/modprobe.d exists
- From: Nicolas Chauvet <kwizart@xxxxxxxxx>
- [PATCH] Fallback to external blkid and path_id in udev rules for <udev-176.
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: [PATCH] dmraid/lvm/mdraid activation logic fix.
- From: WANG Chao <chaowang@xxxxxxxxxx>
- [PATCH] add 'swapoff' to initramfs to fix shutdown/reboot
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] drop NEWROOT from module-setup.sh
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] dmraid/lvm/mdraid activation logic fix.
- From: WANG Chao <chaowang@xxxxxxxxxx>
- Re: [PATCH] 40network/ifup.sh: do_static() and do_ipv6auto return 0 if no errors.
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] 40network/ifup.sh: do_static() and do_ipv6auto return 0 if no errors.
- From: WANG Chao <chaowang@xxxxxxxxxx>
- Re: [ANNOUNCE] dracut 024
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] return proper value in function dracut_install
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [ANNOUNCE] dracut 024
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] Do not overwrite ifcfg files generated by Anaconda kickstart (#865192)
- From: Radek Vykydal <rvykydal@xxxxxxxxxx>
- [PATCH] Don't install FONT if it's the same as DEFAULT_FONT.
- From: Canek Peláez Valdés <caneko@xxxxxxxxx>
- [patch 0/2] two ssh-client module fixes
- [patch 2/2] ssh-client: add urandom seeding
- [patch 1/2] ssh-client: remove ctty related check
- Re: [patch 2/2] ssh-client: add urandom seeding
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch 2/2] ssh-client: add urandom seeding
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch 2/2] ssh-client: add urandom seeding
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch 2/2] ssh-client: add urandom seeding
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch 2/2] ssh-client: add urandom seeding
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch 2/2] ssh-client: add urandom seeding
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch 2/2] ssh-client: add urandom seeding
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] Add rd.noverifyssl argument (#852229)
- From: "Brian C. Lane" <bcl@xxxxxxxxxx>
- [PATCH] return proper value in function dracut_install
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 2/2] dracut-functions.sh: find_binary: path starting with variable
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/2] 90crypt: call systemd commands only if systemd binaries are there
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- initramfs-tools 0.109 release
- From: Michael Prokop <mika@xxxxxxxxxx>
- [PATCH] X86 ACPI: Use #ifdef not #if for CONFIG_X86 check
- From: "Luck, Tony" <tony.luck@xxxxxxxxx>
- Re: Please help: dracut arbitrary mount patches
- From: Dennis Schridde <devurandom@xxxxxxx>
- Please help: dracut arbitrary mount patches
- From: Dennis Schridde <devurandom@xxxxxxx>
- [PATCH v3] improve get_persistent_name function
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH v2] improve get_persistent_name function
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH cleanups] livenet: simplify writing net.ifaces
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [PATCH cleanups] livenet: simplify writing net.ifaces
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] busybox: fix installation from /sbin/busybox
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] busybox: fix installation from /sbin/busybox
- From: Daniel Drake <dsd@xxxxxxxxxx>
- [PATCH cleanups] livenet: simplify writing net.ifaces
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] ACPI: Only allow users with CAP_SYS_RAWIO rights to overwrite ACPI funcs at runtime
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 2/6] X86 ACPI: Introduce x86 arch specific arch_reserve_mem_area() for e820 handling
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 3/6] ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- [PATCH 4/6] ACPI: Implement physical address table override
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 3/6] ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 2/6] X86 ACPI: Introduce x86 arch specific arch_reserve_mem_area() for e820 handling
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 6/6] ACPI: Document ACPI table overriding via initrd
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 1/6] lib: Add early cpio decoder
- From: Thomas Renninger <trenn@xxxxxxx>
- [RESEND] Early cpio decoder and ACPI table override via initrd making use of it
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 5/6] ACPI: Create acpi_table_taint() function to avoid code duplication
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 1/2] lib: Add early cpio decoder
- From: "H. Peter Anvin" <hpa@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH] use by-uuid firstly in get_persistent_dev
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [dracut] weird code in dracut-logger.sh
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Len Brown <lenb@xxxxxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Len Brown <lenb@xxxxxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Yinghai Lu <yinghai@xxxxxxxxxx>
- [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 1/2] lib: Add early cpio decoder
- From: Thomas Renninger <trenn@xxxxxxx>
- Early cpio decoder and ACPI table override via initrd making use of it
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 1/2] lib: Add early cpio decoder
- From: Thomas Renninger <trenn@xxxxxxx>
- initramfs-tools 0.108 release
- From: Michael Prokop <mika@xxxxxxxxxx>
- Re: [PATCH 2/2 v2] use lib function ismounted in convertfs module
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/2 v2] ismounted fix
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/2 v2] ismounted fix
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [PATCH 2/2 v2] use lib function ismounted in convertfs module
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 1/2 v2] ismounted fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 1/3] ismounted fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 1/3] ismounted fix
- From: Karel Zak <kzak@xxxxxxxxxx>
- [PATCH 3/3] use lib function dir_ismounted in convertfs module
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 2/3] update to use dir_ismounted
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 1/3] ismounted fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH] move get_persistent_dev to dracut-functions.sh
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH] move get_persistent_dev to dracut-functions.sh
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [PATCH] move get_persistent_dev to dracut-functions.sh
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH] move get_persistent_dev to dracut-functions.sh
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [PATCH] move get_persistent_dev to dracut-functions.sh
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH liveupdates] apply-live-updates.sh: handle updates for /run
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH liveupdates] apply-live-updates.sh: handle updates for /run
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [PATCH] dracut: Override rd.md settings if rd.md.uuid is provided
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [PATCH liveupdates] apply-live-updates.sh: handle updates for /run
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] dracut: Override rd.md settings if rd.md.uuid is provided
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] Don't truncate the overlay file on a reset.
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] unquote nbd port
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] network: fix ip=ibft regression
- From: Chris Leech <cleech@xxxxxxxxxx>
- Re: [PATCH] dracut: Override rd.md settings if rd.md.uuid is provided
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [PATCH] dracut: Override rd.md settings if rd.md.uuid is provided
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [PATCH 1/2] lib: Add early cpio decoder
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [PATCH] Don't truncate the overlay file on a reset.
- From: Frederick Grose <fgrose@xxxxxxxxx>
- Re: [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 1/2] lib: Add early cpio decoder
- From: Thomas Renninger <trenn@xxxxxxx>
- Early cpio decoder and ACPI table override via initrd making use of it
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH] Don't truncate the overlay file on a reset.
- From: Frederick Grose <fgrose@xxxxxxxxx>
- [PATCH liveupdates] apply-live-updates.sh: handle updates for /run
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] hide 'setsid --help' output in emergency_shell()
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [PATCH] use check_block_and_slaves in for_each_host_dev_and_slaves
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH] use check_block_and_slaves in for_each_host_dev_and_slaves
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch v2 2/3] Add for_each_host_dev_and_slaves for device only checking
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch v2 1/3] wait host devs in base module
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch v2 2/3] Add for_each_host_dev_and_slaves for device only checking
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch v2 2/3] Add for_each_host_dev_and_slaves for device only checking
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch v2 1/3] wait host devs in base module
- From: Dave Young <dyoung@xxxxxxxxxx>
- [patch v2 2/3] Add for_each_host_dev_and_slaves for device only checking
- [patch v2 0/3] add --device option
- [patch v2 1/3] wait host devs in base module
- [patch v2 3/3] Add a dracut option --device to bring up a device in initramfs
- NBD boot problem
- From: Wim Muskee <wimmuskee@xxxxxxxxx>
- [PATCH] unquote nbd port
- From: Wim Muskee <wimmuskee@xxxxxxxxx>
- [PATCH] make splitsep preserve backslashes (RHBZ#851295)
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [patch v2 1/3] wait host devs in base module
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch v2 2/3] Add for_each_host_dev_and_slaves for device only checking
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch 1/3] wait host devs in base module
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch 1/3] wait host devs in base module
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch 2/3] Add for_each_host_dev for device only checking
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch 2/3] Add for_each_host_dev for device only checking
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch 1/3] wait host devs in base module
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [patch 3/3] Add a dracut option --device to bring up a device in initramfs
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch 2/3] Add for_each_host_dev for device only checking
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [patch 1/3] wait host devs in base module
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [patch 1/3] wait host devs in base module
- [patch 2/3] Add for_each_host_dev for device only checking
- [patch 0/3] add --device option
- [patch 3/3] Add a dracut option --device to bring up a device in initramfs
- Why is mixing BOOTIF= and ip= dangerous?
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: Getting "Cannot resume from device" (or something along these) lines with dracut and add_device+="LABEL=sf_unix_swap"
- From: Colin Guthrie <gmane@xxxxxxxxxxxxxx>
- Re: [PATCH] Add option to bring up a device in initramfs
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [PATCH] Add option to bring up a device in initramfs
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: multipath device issue
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: multipath device issue
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH] Add option to bring up a device in initramfs
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Getting "Cannot resume from device" (or something along these) lines with dracut and add_device+="LABEL=sf_unix_swap"
- From: Shlomi Fish <pickledibex@xxxxxxxxx>
- [PATCH] Add option to bring up a device in initramfs
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: multipath device issue
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: multipath device issue
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: multipath device issue
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: multipath device issue
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: multipath device issue
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: multipath device issue
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH] Revert "dracut-functions: $_x should exist, no need to test."
- From: Wang Chao <wangchao19890207@xxxxxxxxx>
- Re: Building new initrd with dracut-network packages for iscsi boot.
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: multipath device issue
- From: Harald Hoyer <harald@xxxxxxxxxx>
- multipath device issue
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH] Revert "dracut-functions: $_x should exist, no need to test."
- From: Michal Soltys <soltys@xxxxxxxx>
- Building new initrd with dracut-network packages for iscsi boot.
- From: Vinay Venkataraghavan <raghavanvinay@xxxxxxxxx>
- [ANNOUNCE] dracut 023 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] split emergency_shell function
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] split emergency_shell function
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH] Revert "dracut-functions: $_x should exist, no need to test."
- From: Chao Wang <chaowang@xxxxxxxxxx>
- [PATCH] dracut-functions: $_x should exist, no need to test.
- From: Chao Wang <chaowang@xxxxxxxxxx>
- [PATCH 2/2] dracut-lib: add find_mount, use it to implement ismounted
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/2] add comment for getargbool()
- From: Will Woods <wwoods@xxxxxxxxxx>
- PATCH: add support for xfs / reiserfs separate journal device
- From: Frederic Crozat <fcrozat@xxxxxxxx>
- [PATCH 2/7] 98usrmount: use rw and ro options instead of rd.usrmount.ro
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 7/7] modules.d/99base/mount-hook.sh is not used - removed
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 6/7] apply "ro" and "rw" options from cmdline to / mount
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 5/7] dracut-lib: new functions: listlist and are_lists_eq
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 4/7] 98usrmount: [ "x$_usr_found" != "x" ] - removed redundant 'x'
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 3/7] 98usrmount: print mount options
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/7] 95rootfs-block: fix left fsck rel. checks
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH] 90multipath: added kpartx.rules; multipath.rules - different prefix
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [Patch] 90kernel-modules: remove unused variables in install()
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 3/3] gentoo.conf: set udevdir
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 2/3] Config file for systemd on Gentoo.
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/3] Remove obsolete gentoo conf file.
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH] 90multipath: check() - Regexp fix to match multipath partition.
- From: Chao Wang <chaowang@xxxxxxxxxx>
- [PATCH] 95fstab-sys: Skip mounted filesystem.
- From: Chao Wang <chaowang@xxxxxxxxxx>
- [PATCH 2/2] Makefile: use implicit rules for install/dracut-install
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/2] Remove object file from repo: install/hashmap.o
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: [PATCH] 91crypt-loop: replace basename calls with string matching
- From: Harald Hoyer <harald.hoyer@xxxxxxxxx>
- [PATCH 5/5] 91crypt-loop: replace basename calls with string matching
- From: Leho Kraav <leho@xxxxxxxxx>
- [PATCH 2/5] 90crypt: enhance crypt-lib keydev mounting
- From: Leho Kraav <leho@xxxxxxxxx>
- [PATCH 3/5] 91crypt-loop: open root device with a key inside encrypted loop container
- From: Leho Kraav <leho@xxxxxxxxx>
- [PATCH 4/5] 91crypt-loop: use initqueue for cleanup strategy
- From: Leho Kraav <leho@xxxxxxxxx>
- [PATCH 1/5] 90crypt: recognize .img as loop key container
- From: Leho Kraav <leho@xxxxxxxxx>
- open root device with a key inside encrypted loop container
- From: Leho Kraav <leho@xxxxxxxxx>
- [PATCH] 91crypt-loop: replace basename calls with string matching
- From: Leho Kraav <leho@xxxxxxxxx>
- Re: [PATCH 1/2] init: Introduce early initrd files through uncompressed cpio passing
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 1/2] init: Introduce early initrd files through uncompressed cpio passing
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- Re: [PATCH 1/2] init: Introduce early initrd files through uncompressed cpio passing
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 1/2] init: Introduce early initrd files through uncompressed cpio passing
- From: "H. Peter Anvin" <hpa@xxxxxxxxx>
- [ANNOUNCE] dracut 022 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [ANNOUNCE] dracut 021 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH 2/2] ACPI: Override arbitrary ACPI tables via initrd for debugging
- From: Thomas Renninger <trenn@xxxxxxx>
- Early initrd file overwrite and ACPI table override making use of it
- From: Thomas Renninger <trenn@xxxxxxx>
- [PATCH 1/2] init: Introduce early initrd files through uncompressed cpio passing
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: Further specfile changes
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: Further specfile changes
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: Further specfile changes
- From: Thomas Renninger <trenn@xxxxxxx>
- Further specfile changes
- From: Thomas Renninger <trenn@xxxxxxx>
- Re: [PATCH 1/2]dhclient initqueue hook fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 1/2]dhclient initqueue hook fix
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/2]dhclient initqueue hook fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: nfs: install modprobe config file
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: nfs: install modprobe config file
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: nfs: install modprobe config file
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: nfs: install modprobe config file
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: nfs: install modprobe config file
- From: Harald Hoyer <harald@xxxxxxxxxx>
- nfs: install modprobe config file
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 1/2]dhclient initqueue hook fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 2/2]02caps: do not create /bin/sh link
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 1/2]dhclient initqueue hook fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH] fix readonly prefix
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] fix readonly prefix
- From: Mark Hamzy <hamzy@xxxxxxxxxx>
- Fix for typo
- From: Robert Schweikert <rjschwei@xxxxxxxx>
- Re: dracut does not load pata_atiixp module
- From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
- Re: dracut does not load pata_atiixp module
- From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
- dracut does not load pata_atiixp module
- From: Paulius Zaleckas <paulius.zaleckas@xxxxxxxxx>
- [PATCH 4/4] 95rootfs-block: skip checks rel. to fsck if rd.skipfsck is supplied
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 3/4] new option: rd.skipfsck to skip fsck for rootfs and /usr
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 2/4] 99base: don't require fs-lib to detect rootfstype
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/4] 98usrmount: force mounting /usr read-only option (rd.usrmount.ro)
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: [ANNOUNCE] dracut 020 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [ANNOUNCE] dracut 020 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/1] Convert MAC in BOOTIF parameter to lower case
- From: Srinivasa T N <seenutn@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] Convert MAC in BOOTIF parameter to lower case
- From: Srinivasa T N <seenutn@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] Convert MAC in BOOTIF parameter to lower case
- From: Anton Blanchard <anton@xxxxxxxxx>
- [PATCH] Fixed BOOTIF for converting mac addr to lowercase
- From: Srinivasa T N <seenutn@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/1] Convert MAC in BOOTIF parameter to lower case
- From: Srinivasa T N <seenutn@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/4] 90dmsquash-live: don't source fs-lib.sh as it is not used
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 3/4] dracut-lib.sh: Use "$*" instead of "$@" in warn, info, and so on...
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 2/4] man pages: hostonly mode generates host-specific configuration
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/4] 98usrmount: depend on fs-lib
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: [PATCH] network: support vlan tagged bonding
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] network: support vlan tagged bonding
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [Bug 43359] LVM volumes not detected
- From: Muthu Kumar <muthu.lkml@xxxxxxxxx>
- Re: [Bug 43359] LVM volumes not detected
- From: Muthu Kumar <muthu.lkml@xxxxxxxxx>
- [PATCH 2/2] ifcfg: fix output for ipv6 static addressing
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/2] fix ifup for static ipv6
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] Avoid annonying warnings when pkg-config is not installed.
- From: Juan RP <xtraeme@xxxxxxxxx>
- [ANNOUNCE] dracut 019 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: Dave Jones <davej@xxxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- [PATCH] Handle multiple underlying devices of a bridge
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: Harald Hoyer <harald.hoyer@xxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: Dan Williams <dan.j.williams@xxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: maximilian attems <max@xxxxxxx>
- Re: [PATCH 2/2] do emergency_shell in die() if rd.debug=1
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] dracut-lib.sh: add copytree(), use it where applicable
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/2] don't wait_for_loginit in emergency_shell()
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] add anaconda-style option parsing to ip_to_var
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/8] Add vlan support in network module
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH 8/8] Remove rd.neednet cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 7/8] Update the documentation of ifname= cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 6/8] Do not use ifenslave
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 5/8] Remove netroot check in cmdline parsing code
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 4/8] Add doc for birdge= cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 3/8] Add doc for bond= cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 2/8] Add doc for vlan= cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 1/8] Add vlan support in network module
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [BUGFIX Patch] fix a wrong usage of vinfo in init.sh
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [BUGFIX Patch] fix a wrong usage of vinfo in init.sh
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [BUGFIX Patch] fix a wrong usage of vinfo in init.sh
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [PATCH 2/2] dmsquash-live: do not hardcode path to mount(8) in generated hook.
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH 2/2] dmsquash-live: do not hardcode path to mount(8) in generated hook.
- From: Juan RP <xtraeme@xxxxxxxxx>
- [PATCH 1/2] modules.d/99base/init.sh: check for a valid init in case INIT is a symlink.
- From: Juan RP <xtraeme@xxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Remove scsi_wait_scan module
- From: maximilian attems <max@xxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] dracut-lib.sh: add find_mount()
- From: Karel Zak <kzak@xxxxxxxxxx>
- [PATCH] add anaconda-style option parsing to ip_to_var
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 2/2] do emergency_shell in die() if rd.debug=1
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/2] don't wait_for_loginit in emergency_shell()
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] dracut-lib.sh: add find_mount()
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] dracut-lib.sh: add copytree(), use it where applicable
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH 7/7] Avoid generating udev rules for master interfaces
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 6/7] Do not use ifenslave
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 5/7] Remove netroot check in cmdline parsing code
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 4/7] Add doc for bridge= cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 3/7] Add doc for bond= cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 2/7] Add doc for vlan= cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 1/7] Add vlan support in network module
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [PATCH 1/2] check kernel module existance
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/2] check kernel module existance
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [RFC PATCH 1/3] Add vlan support in network module
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [RFC PATCH 1/3] Add vlan support in network module
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [RFC PATCH 3/3] Avoid generating udev rules for vlan interface
- From: Cong Wang <amwang@xxxxxxxxxx>
- [RFC PATCH 2/3] Remove netroot check in cmdline parsing code
- From: Cong Wang <amwang@xxxxxxxxxx>
- [RFC PATCH 1/3] Add vlan support in network module
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [PATCH] dracut:fstab-sys: Wait for devices specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] add option --printsize
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH] add option --printsize
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] add option --printsize
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- [PATCH] add option --printsize
- From: Dave Young <dyoung@xxxxxxxxxx>
- [Patch] check ifenslave instead of brctl in parse-bond.sh
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [PATCH] dracut:fstab-sys: Wait for devices specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [PATCH] dracut:fstab-sys: Wait for devices specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [PATCH] dracut:fstab-sys: Wait for devices specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [PATCH 2/2] check install files passed by cmdline
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 1/2] check kernel module existance
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: dracut options for installing files and drivers
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: dracut options for installing files and drivers
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: dracut options for installing files and drivers
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: dracut options for installing files and drivers
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: [PATCH 3/3] url-lib: fix progressbar on s390, again
- From: Dan Horák <dan@xxxxxxxx>
- [PATCH 2/3] ifcfg: fix output for ipv6 static addressing
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 3/3] url-lib: fix progressbar on s390, again
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/3] fix ifup for static ipv6 address
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] 90kernel-modules/module-setup.sh: install xhci-hcd
- From: Olivier Blin <dev@xxxxxxxxx>
- Re: [PATCH] Fail to boot if mediacheck fails (#817419)
- From: John Reiser <jreiser@xxxxxxxxxxxx>
- Re: [PATCH] Fail to boot if mediacheck fails (#817419)
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut options for installing files and drivers
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: dracut options for installing files and drivers
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH] Fail to boot if mediacheck fails (#817419)
- From: "Brian C. Lane" <bcl@xxxxxxxxxx>
- Re: dracut options for installing files and drivers
- From: Harald Hoyer <harald@xxxxxxxxxx>
- dracut options for installing files and drivers
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: Does netroot=isci: option work with latest dracut
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: Does netroot=isci: option work with latest dracut
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: Does netroot=isci: option work with latest dracut
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: Does netroot=isci: option work with latest dracut
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH 1/2] fix _getcmdline arg-duplicating bug with /etc/cmdline*
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 2/2] ifcfg: fix resolv.conf
- From: Will Woods <wwoods@xxxxxxxxxx>
- Does netroot=isci: option work with latest dracut
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: What are the semantics of --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: What are the semantics of --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: What are the semantics of --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- What are the semantics of --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald.hoyer@xxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [PATCH] ifcfg: write DNS1=... for nameserver= args (RHBZ#815369)
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [PATCH] ifcfg: write DNS1=... for nameserver= args (RHBZ#815369)
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [PATCH] ifcfg: write DNS1=... for nameserver= args (RHBZ#815369)
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- [PATCH] ifcfg: write DNS1=... for nameserver= args (RHBZ#815369)
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 2/2] url-lib: don't use --progress-bar if TERM=dumb (RHBZ#814713)
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/2] url-lib: don't add existing handlers multiple times
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Cong Wang <amwang@xxxxxxxxxx>
- Re: [PATCH 2/2] move cleanup scripts to pre-pivot-cleanup hook
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 1/2] add pre-pivot-cleanup hook
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] lsinitrd: support symlinks
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: Debian multiarch support
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH,RFC] virtfs root filesystem support
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] rootfs-block: avoid remount when options don't change
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] a few patches
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: dracut does not mount iscsi targets specified using --mount option
- From: Cong Wang <amwang@xxxxxxxxxx>
- [PATCH 2/2] move cleanup scripts to pre-pivot-cleanup hook
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 1/2] add pre-pivot-cleanup hook
- From: Dave Young <dyoung@xxxxxxxxxx>
- dracut does not mount iscsi targets specified using --mount option
- From: Vivek Goyal <vgoyal@xxxxxxxxxx>
- Re: [Patch] network: move the kill-dhclient.sh hook later
- From: Dave Young <dyoung@xxxxxxxxxx>
- [Patch] network: move the kill-dhclient.sh hook later
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- [PATCH] lsinitrd: support symlinks
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Feature request: Support for the 'toram' boot parameter in dmsquash-live
- From: Espen Braastad <espen.braastad@xxxxxxxxxxxxxxxxxx>
- Re: Debian multiarch support
- From: Jon Ander Hernandez <jonan.h@xxxxxxxxx>
- [PATCH,RFC] virtfs root filesystem support
- From: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
- [PATCH] rootfs-block: avoid remount when options don't change
- From: Daniel Drake <dsd@xxxxxxxxxx>
- Re: Debian multiarch support
- From: Jon Ander Hernandez <jonan.h@xxxxxxxxx>
- Debian multiarch support
- From: Jon Ander Hernandez <jonan.h@xxxxxxxxx>
- [PATCH 5/5] shutdown: use emergency_shell from dracut-lib
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 4/5] Make splitsep work as documented with less vars than fields
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 3/5] network: add save_netinfo, fix problems with nfs->NM takeover
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 2/5] run setup_net at start of initqueue/online hook
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/5] dracut-lib: add str_ends, to go along with str_starts
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] a few patches
- From: Will Woods <wwoods@xxxxxxxxxx>
- [ANNOUNCE] dracut 018 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: NFS mount problem since 017
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: NFS mount problem since 017
- From: Wim Muskee <wimmuskee@xxxxxxxxx>
- Re: NFS mount problem since 017
- From: Harald Hoyer <harald@xxxxxxxxxx>
- dracut: fstab-sys included with --fstab but not --add-fstab
- From: "Mike Edenfield" <kutulu@xxxxxxxxxx>
- Re: NFS mount problem since 017
- From: Wim Muskee <wimmuskee@xxxxxxxxx>
- Re: NFS mount problem since 017
- From: Wim Muskee <wimmuskee@xxxxxxxxx>
- [PATCH 1/2] run setup_net at start of initqueue/online hook
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 2/2] network: add save_netinfo, fix problems with nfs->NM takeover
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [PATCH 1/2] add --tmpdir option to cmd line args and tmpdir to config file
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH 2/2] document --tmpdir option
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH 1/2] add --tmpdir option to cmd line args and tmpdir to config file
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH] Use /tmp instead of /var/tmp for temporary data.
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH] inst_symlink: create parent dir if doesn't exist
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: [PATCH] inst_symlink: create parent dir if doesn't exist
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- [PATCH] inst_symlink: create parent dir if doesn't exist
- From: Amadeusz Żołnowski <aidecoe@xxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH-v4 1/2] systemd: mount the securityfs filesystem at early stage
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- [PATCH] shutdown: fix PATH
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [systemd-devel] [PATCH-v4 1/2] systemd: mount the securityfs filesystem at early stage
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [PATCH] Avoid use of "export -n"
- From: Harald Hoyer <harald.hoyer@xxxxxxxxx>
- Re: [PATCH] provide name based nbd connects
- From: Harald Hoyer <harald.hoyer@xxxxxxxxx>
- [PATCH] use mount --rbind to move submounts under /run into $NEWROOT
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: NFS mount problem since 017
- From: Karel Zak <kzak@xxxxxxxxxx>
- NFS mount problem since 017
- From: Wim Muskee <wimmuskee@xxxxxxxxx>
- [PATCH] provide name based nbd connects
- From: Wim Muskee <wimmuskee@xxxxxxxxx>
- [PATCH] Avoid use of "export -n"
- From: Daniel Drake <dsd@xxxxxxxxxx>
- [PATCH-v4 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- [PATCH-v4 1/2] systemd: mount the securityfs filesystem at early stage
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [PATCH] fix "execvp: No such file or directory" in emergency_shell
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] Make sure 'set -x' gets turned back on in wait_for_loginit
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] Make sure 'set -x' gets turned back on in wait_for_loginit
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] fix "execvp: No such file or directory" in emergency_shell
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [systemd-devel] [PATCH-v3 1/2] systemd: mount the securityfs filesystem at early stage
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [PATCH-v3 1/2] systemd: mount the securityfs filesystem at early stage
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- [PATCH 3/3] remove --ctty arg and make cttyhack the default
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 2/3] only use openvt on systems where the console is a vt
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/3] fix emergency_shell with setsid (--ctty/cttyhack)
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] fix up console handling
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [systemd-devel] [PATCH-v3 1/2] systemd: mount the securityfs filesystem at early stage
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [PATCH-v3 1/2] systemd: mount the securityfs filesystem at early stage
- From: Dave Reisner <d@xxxxxxxxxxxxxx>
- [PATCH-v3 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- [PATCH-v3 1/2] systemd: mount the securityfs filesystem at early stage
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- [PATCH] Add 'live.updates' to livenet module
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] url-lib: clean up output
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] img-lib: fix unpack_img()
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] fix apply-live-updates failing because of /lib symlink
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 2/2] write-ifcfg.sh: add UUID=.. and save the lease files with the same uuid
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/2] write-ifcfg.sh: cleanups
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 2/2] add initqueue --env and "online" hook
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/2] network: refactor stuff from netroot/parse-ip-opts to net-lib
- From: Will Woods <wwoods@xxxxxxxxxx>
- initramfs-tools 0.101 release
- From: Michael Prokop <mika@xxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: Fail to mount a ext2 partition /dev/mmcblk0p1 on SD card as root file system in kernel 3.2
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- [PATCH] install ctcm network module on s390
- From: Dan Horák <dan@xxxxxxxx>
- Fail to mount a ext2 partition /dev/mmcblk0p1 on SD card as root file system in kernel 3.2
- From: Sonic Zhang <sonic.adi@xxxxxxxxx>
- [PATCH 2/2] move emergency_shell to dracut-lib.sh
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 1/2] url-lib: make nfs support optional
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: build initramfs faster
- From: Dennis Schridde <devurandom@xxxxxxx>
- build initramfs faster
- From: John Reiser <jreiser@xxxxxxxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: John Reiser <jreiser@xxxxxxxxxxxx>
- Re: [PATCH] usrmount should skip comments in fstab
- From: Dennis Schridde <devurandom@xxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: David Dillow <dave@xxxxxxxxxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: John Reiser <jreiser@xxxxxxxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: David Dillow <dave@xxxxxxxxxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: John Reiser <jreiser@xxxxxxxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: Cong Wang <xiyou.wangcong@xxxxxxxxx>
- Re: Testers wanted: dracut lazy install with cpio
- From: John Reiser <jreiser@xxxxxxxxxxxx>
- Testers wanted: dracut lazy install with cpio
- From: Harald Hoyer <harald.hoyer@xxxxxxxxx>
- Re: [PATCH] Use modinfo to gather module dependencies
- From: Dennis Schridde <devurandom@xxxxxxx>
- Re: [PATCH] Use modinfo to gather module dependencies
- From: Colin Guthrie <gmane@xxxxxxxxxxxxxx>
- Re: [PATCH] Use modinfo to gather module dependencies
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Fwd: Re: [PATCH] Use modinfo to gather module dependencies
- From: Dennis Schridde <devurandom@xxxxxxx>
- Re: [PATCH] Use modinfo to gather module dependencies
- From: Colin Guthrie <gmane@xxxxxxxxxxxxxx>
- Re: [PATCH] Use modinfo to gather module dependencies
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH] url-lib: make nfs support optional
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH] usrmount should skip comments in fstab
- From: Dennis Schridde <devurandom@xxxxxxx>
- [PATCH] Use modinfo to gather module dependencies
- From: Dennis Schridde <devurandom@xxxxxxx>
- [ANNOUNCE] dracut 017 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- [PATCH 1/2] systemd: mount the securityfs filesystem at early stage
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Kay Sievers <kay.sievers@xxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Kay Sievers <kay.sievers@xxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Kay Sievers <kay.sievers@xxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Colin Guthrie <gmane@xxxxxxxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [PATCH 1/2] systemd: mount the securityfs filesystem at early stage
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [Linux-ima-user] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 1/2] systemd: mount the securityfs filesystem at early stage
- From: Lennart Poettering <lennart@xxxxxxxxxxxxxx>
- Chicken+Egg: Using udevadm to detect LVM+RAID fails.
- From: Colin Guthrie <gmane@xxxxxxxxxxxxxx>
- [PATCH] url-lib: fix fetch_url return value for dotfiles
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Gustavo Sverzut Barbieri <barbieri@xxxxxxxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Gustavo Sverzut Barbieri <barbieri@xxxxxxxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx>
- Re: [Linux-ima-user] [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Michael Cassaniti <m.cassaniti@xxxxxxxxx>
- Re: [PATCH 3/3] add function wait_for_route_ok
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH v2] add function wait_for_route_ok
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 3/3] add function wait_for_route_ok
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: [PATCH 2/3] wait_for_if_up fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH] livenet: avoid spurious error message / wait_for_dev
- From: Will Woods <wwoods@xxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- [ANNOUNCE] dracut 016 release
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH] add net-lib, nfs-lib, url-lib, and img-lib
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Gustavo Sverzut Barbieri <barbieri@xxxxxxxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [systemd-devel] [PATCH 2/2] main: added support for loading IMA custom policies
- From: Gustavo Sverzut Barbieri <barbieri@xxxxxxxxxxxxxx>
- [PATCH 2/2] main: added support for loading IMA custom policies
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- [PATCH 1/2] systemd: mount the securityfs filesystem at early stage
- From: Roberto Sassu <roberto.sassu@xxxxxxxxx>
- Re: [PATCH 1/9] 40network: add net-lib.sh
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 3/3] add function wait_for_route_ok
- From: Harald Hoyer <harald@xxxxxxxxxx>
- Re: [PATCH 2/3] wait_for_if_up fix
- From: Harald Hoyer <harald@xxxxxxxxxx>
- [PATCH 3/3] add function wait_for_route_ok
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 1/3] ssh-client module install fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- [PATCH 2/3] wait_for_if_up fix
- From: Dave Young <dyoung@xxxxxxxxxx>
- Re: dracut: ordering of modules
- From: Daniel J Walsh <dwalsh@xxxxxxxxxx>
- Re: [PATCH 9/9] skiproot - script for network setup without network root
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 9/9] skiproot - script for network setup without network root
- From: Will Woods <wwoods@xxxxxxxxxx>
- [PATCH 8/9] add img-lib: a library for handling filesystem images
- From: Will Woods <wwoods@xxxxxxxxxx>
[Index of Archives]
[Linux Kernel]
[Linux USB Devel]
[Linux SCSI]
[Samba]
[Yosemite News]