Linux Kernel I2C

• Thread Index

• [PATCH 8/9] I2C: mv64xxx: move mv64xxx_i2c_prepare_for_io()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 7/9] I2C: mv64xxx: remove I2C_M_NOSTART code
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 6/9] I2C: mv64xxx: fix error handling for request_irq()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 5/9] I2C: mv64xxx: use devm_kzalloc()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 4/9] I2C: mv64xxx: use devm_clk_get() to avoid missing clk_put()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 3/9] I2C: mv64xxx: use devm_ioremap_resource()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 2/9] I2C: mv64xxx: use return value from mv64xxx_i2c_map_regs()
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 1/9] I2C: mv64xxx: work around signals causing I2C transactions to be aborted
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH 0/9] Fix Marvell mv63xxx I2C driver
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 08/33] drivers/i2c/busses: don't check resource with devm_ioremap_resource
  • From: Barry Song <21cnbao@xxxxxxxxx>
• [PATCH 08/33] drivers/i2c/busses: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: PROBLEM: modprobe hang at startup (3.8.x, 3.9.x, IBM x3550)
  • From: Robert Norris <robn@xxxxxxxxx>
• [PATCH] i2c: sirf: move driver init from module_init to subsys_initcall
  • From: Barry Song <Baohua.Song@xxxxxxx>
• Re: PROBLEM: modprobe hang at startup (3.8.x, 3.9.x, IBM x3550)
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] I2C-mv64xxx.c: work around signals causing I2C transactions to be aborted
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• [PATCH] i2c-i801: Document feature bits in modinfo
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: PROBLEM: modprobe hang at startup (3.8.x, 3.9.x, IBM x3550)
  • From: Robert Norris <robn@xxxxxxxxx>
• Re: PROBLEM: modprobe hang at startup (3.8.x, 3.9.x, IBM x3550)
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH REBASE] i2c-designware: make SDA hold time configurable
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
• Re: [PATCH v7] i2c-designware: make SDA hold time configurable
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: core: make it possible to match a pure device tree driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• [PATCH 2/2] i2c-designware: add Intel BayTrail ACPI ID
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c-designware: always clear interrupts before enabling them
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: make it possible to match a pure device tree driver
  • From: Grant Likely <grant.likely@xxxxxxxxxx>
• Re: [PATCH] i2c: core: make it possible to match a pure device tree driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V10 2/2] i2c/designware: Provide i2c bus recovery support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• RE: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful
  • From: "Zhang, Sonic" <Sonic.Zhang@xxxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: core: make it possible to match a pure device tree driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] i2c: core: make it possible to match a pure device tree driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] i2c: vt8500: Add support for I2C bus on Wondermedia SoCs
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [RFC 09/42] drivers/i2c/busses: don't check resource with devm_ioremap_resource
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [RFC 09/42] drivers/i2c/busses: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• RE: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful
  • From: "Zhang, Sonic" <Sonic.Zhang@xxxxxxxxxx>
• RE: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful
  • From: "Zhang, Sonic" <Sonic.Zhang@xxxxxxxxxx>
• RE: [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful
  • From: "Zhang, Sonic" <Sonic.Zhang@xxxxxxxxxx>
• [PATCH v2 0/2] i2c: fix two wrong mem release
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH v2 2/2] i2c: pxa: no need release_mem_region before request_mem_region successful
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• [PATCH v2 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it init successful
  • From: Libo Chen <libo.chen@xxxxxxxxxx>
• RE: [uclinux-dist-devel] [PATCH 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it`s init successful
  • From: "Zhang, Sonic" <Sonic.Zhang@xxxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• Re: [lm-sensors] i2c multimaster and the device driver detect function
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• i2c multimaster and the device driver detect function
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Josef Ahmad <josef.ahmad@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Josef Ahmad <josef.ahmad@xxxxxxxxxxxxxxx>
• Re: [PATCH v8] i2c: exynos5: add High Speed I2C controller driver
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: pxa: no need release_mem_region before request_mem_region successful
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: pxa: no need release_mem_region before request_mem_region successful
  • From: Gu Zheng <guz.fnst@xxxxxxxxxxxxxx>
• [PATCH v8] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Chatradhi <naveenkrishna.ch@xxxxxxxxx>
• Proposed utility
  • From: Dave Joubert <dave.joubert@xxxxxxxxxxxxxx>
• [PATCH 03/13] i2c: i2c-mxs: Let device core handle pinctrl
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• [PATCH 02/13] i2c: i2c-imx: Let device core handle pinctrl
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: i2c-bfin-twi: don`t free peripheral before it`s init successful
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• [PATCH 2/2] i2c: pxa: no need release_mem_region before request_mem_region successful
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• [PATCH 0/2] i2c: fix two wrong mem release
  • From: Libo Chen <clbchenlibo.chen@xxxxxxxxxx>
• Re: [PATCH] PM: Add pm_ops_ptr() macro
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 4/5] ARM: sun5i: dt: Add i2c muxing options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] ARM: sunxi: dt: Add i2c controller nodes to the DTSI
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: sun4i: dt: Add i2c muxing options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: sun5i: olinuxino: Enable the i2c controllers
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] i2c: sunxi: Add Allwinner A1X i2c driver
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH RESEND 0/5] Add I2C support for Allwinner SoCs
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PM: Add pm_ops_ptr() macro
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PULL REQUEST] i2c for 3.10
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Fwd: [PATCH v7] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
• Re: Fwd: [PATCH v7] i2c: exynos5: add High Speed I2C controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/5] ARM: sunxi: dt: Add i2c controller nodes to the DTSI
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: sun4i: dt: Add i2c muxing options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: sun5i: dt: Add i2c muxing options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: sun5i: olinuxino: Enable the i2c controllers
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] i2c: sunxi: Add Allwinner A1X i2c driver
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] Add I2C support for Allwinner SoCs
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Fwd: [PATCH v7] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
• [PATCH] i2c: Add bcm2079x-i2c client driver
  • From: "Jeffrey (Sheng-Hui) Chu" <jeffchu@xxxxxxxxxxxx>
• Re: [PATCH v3 1/6] at_hdmac: move to generic DMA binding
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• Re: [PATCH v3 5/6] mci: at91: convert to dma_request_slave_channel_compat()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH] PM: Add pm_ops_ptr() macro
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] at_hdmac: move to generic DMA binding
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Status of I2C mac-drivers needing attach_adapter?
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Access to bus with DDR DIMMs
  • From: Martin Hicks <mort@xxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Howto compile py-smbus with python 3.2
  • From: Tom Cox <tom@xxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Josef Ahmad <josef.ahmad@xxxxxxxxxxxxxxx>
• Re: Re: Re: Re: [PATCH] I2C: Change the value of octeon i2c adapter timeout value
  • From: EUNBONG SONG <eunb.song@xxxxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP: fix boot sequence
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: "Josef Ahmad" <josef.ahmad@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP: fix boot sequence
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c-xiic.c must always write 16-bit words to TX_FIFO
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Re: Re: [PATCH] I2C: Change the value of octeon i2c adapter timeout value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: omap: convert to module_platform_driver()
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 0/2] OMAP: fix boot sequence
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 1/6] at_hdmac: move to generic DMA binding
  • From: Vinod Koul <vinod.koul@xxxxxxxxx>
• [PATCH] i2c-xiic.c must always write 16-bit words to TX_FIFO
  • From: "Steven A. Falco" <sfalco@xxxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Josef Ahmad <josef.ahmad@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: "Josef Ahmad" <josef.ahmad@xxxxxxxxxxxxxxx>
• Re: how to gracefully unload an i2c driver if chip not detected?
  • From: Émeric Vigier <emeric.vigier@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] at_hdmac: move to generic DMA binding
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Retry transfer when no_ack status is detected
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: how to gracefully unload an i2c driver if chip not detected?
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: how to gracefully unload an i2c driver if chip not detected?
  • From: Émeric Vigier <emeric.vigier@xxxxxxxxxxxxxxxxxxxx>
• Re: Re: Re: [PATCH] I2C: Change the value of octeon i2c adapter timeout value
  • From: EUNBONG SONG <eunb.song@xxxxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: "Josef Ahmad" <josef.ahmad@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: fix RX FIFO overrun
  • From: "Bryan O'Donoghue" <bryan.odonoghue.lkml@xxxxxxxxxxxxxxxxx>
• [PATCH] i2c-designware: fix RX FIFO overrun
  • From: Josef Ahmad <josef.ahmad@xxxxxxxxxxxxxxx>
• Re: [PATCH] I2C: EXYNOS: High speed mode clock setting for HSI2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Re: [PATCH] I2C: Change the value of octeon i2c adapter timeout value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: i2c-mxs woes
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: i2c-mxs woes
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH] I2C: EXYNOS: High speed mode clock setting for HSI2C
  • From: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
• Re: i2c-mxs woes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: i2c-mxs woes
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/3] i2c: davinci: drop superfluous {get|put}_device
  • From: Sekhar Nori <nsekhar@xxxxxx>
• i2c-mxs woes
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] ARM: at91: dts: add i2c dma support
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v3 6/6] ARM: at91: dts: add MCI DMA support
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 3/3] i2c: designware-pci: drop superfluous {get|put}_device
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: designware-plat: drop superfluous {get|put}_device
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] ARM: at91: dts: set #dma-cells to the correct value
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: Re: [PATCH] I2C: Change the value of octeon i2c adapter timeout value
  • From: EUNBONG SONG <eunb.song@xxxxxxxxxxx>
• [PATCH v3 6/6] ARM: at91: dts: add MCI DMA support
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH v3 5/6] mci: at91: convert to dma_request_slave_channel_compat()
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH v3 4/6] ARM: at91: dts: add i2c dma support
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH v3 3/6] i2c: at91: convert to dma_request_slave_channel_compat()
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH v3 2/6] ARM: at91: dts: set #dma-cells to the correct value
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH v3 1/6] at_hdmac: move to generic DMA binding
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH v3 0/6] ARM: at91: move to generic DMA device tree binding
  • From: <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH] I2C: Change the value of octeon i2c adapter timeout value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] I2C: Change the value of octeon i2c adapter timeout value
  • From: EUNBONG SONG <eunb.song@xxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: Kontron PLD mfd driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 3/3] i2c: designware-pci: drop superfluous {get|put}_device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/3] i2c: designware-plat: drop superfluous {get|put}_device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/3] i2c: davinci: drop superfluous {get|put}_device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/3] remove {get|put}_device from I2C drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: Kontron PLD mfd driver
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: Kontron PLD mfd driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/6] at_hdmac: move to generic DMA binding
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/6] at_hdmac: move to generic DMA binding
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH] I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: 송은봉 <eunb.song@xxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: Kontron PLD mfd driver
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: Kontron PLD mfd driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] MAINTAINERS: Ben Dooks is inactive regarding I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH v6 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v7] i2c-designware: make SDA hold time configurable
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 6/6] ARM: at91: dts: add MCI DMA support
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH 5/6] mci: at91: convert to dma_request_slave_channel_compat()
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH 4/6] ARM: at91: dts: add i2c dma support
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH 3/6] i2c: at91: convert to dma_request_slave_channel_compat()
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH 2/6] ARM: at91: dts: set #dma-cells to the correct value
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH 1/6] at_hdmac: move to generic DMA binding
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH v2 0/6] ARM: at91: move to generic DMA device tree binding
  • From: <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH v7] i2c: exynos5: add High Speed I2C controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] mci: at91: convert to dma_request_slave_channel_compat()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 1/3] at_hdmac: move to generic DMA binding
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: Kontron PLD i2c bus driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: use of_alias_get_id to order i2c devices
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: use of_alias_get_id to order i2c devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: at91: convert to dma_request_slave_channel_compat()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: I2C_M_RECV_LEN for i2c-mxs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: mxs: remove races in PIO code
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] i2c-designware: move to managed functions (devm_*)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: Add SMBus emulation for block read
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: at91: move to generic DMA device tree bindings
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH 3/3] mci: at91: convert to dma_request_slave_channel_compat()
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH 2/3] i2c: at91: convert to dma_request_slave_channel_compat()
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH 1/3] at_hdmac: move to generic DMA binding
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH 0/3] ARM: at91: move to generic DMA device tree bindings
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH v2 2/2] i2c: mxs: do error checking and handling in PIO mode
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: mxs: remove races in PIO code
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: mxs: always end a transfer with a proper STOP
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: I2C_M_RECV_LEN for i2c-mxs
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 08/30] i2c: s3c2410: make header file local
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• ArchLinux ARM I2C concurrent support
  • From: Michael Powell <mwpowellhtx@xxxxxxxxx>
• Re: [PATCH 08/30] i2c: s3c2410: make header file local
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: I2C_M_RECV_LEN for i2c-mxs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: Kontron PLD mfd driver
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
• [v3] Support Elan Touchscreen eKTF product.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] gpio: Kontron PLD gpio driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: I2C_M_RECV_LEN for i2c-mxs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: I2C_M_RECV_LEN for i2c-mxs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] gpio: Kontron PLD gpio driver
  • From: Michael Brunner <mibru@xxxxxx>
• I2C_M_RECV_LEN for i2c-mxs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] i2c: s3c2410: make header file local
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c: imx: use of_alias_get_id to order i2c devices
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v3 05/10] i2c: s3c2410: make header file local
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v3 05/10] i2c: s3c2410: make header file local
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Having problems with i2c on an embedded EG20t
  • From: Mattias Helsing <helsing72@xxxxxxxxx>
• Re: [PATCH 1/3] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• [PATCH 08/30] i2c: s3c2410: make header file local
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 00/30] ARM: exynos multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 3/4] gpio: Kontron PLD gpio driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/6] DDR3: Print core timings at all supported standard speeds
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 5/6] DDR3: Repeat core timings as time values
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 4/6] DDR3: Use fine time base
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 3/6] DDR3: Store time bases, don't print them
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 2/6] DDR3: Fix core timings rounding
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 1/6] DDR3: Fix tRAS value
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 0/6] decode-dimms: Fix and improve DDR3 support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/4] gpio: Kontron PLD gpio driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: Kontron PLD i2c bus driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: Kontron PLD watchdog timer
  • From: Kevin Strasser <kevin.strasser@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] watchdog: Kontron PLD watchdog timer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 7/7] i2c-designware: switch to use runtime PM autosuspend
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 1/7] i2c-designware: move to managed functions (devm_*)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 5/7] i2c-designware: enable/disable the controller properly
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 4/7] i2c-designware: use dynamic adapter numbering on Lynxpoint
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 3/7] i2c-designware-pci: use managed functions pcim_* and devm_*
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 7/7] i2c-designware: switch to use runtime PM autosuspend
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 6/7] i2c-designware: use usleep_range() in the busy-loop
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 2/7] i2c-designware-pci: use dev_err() instead of printk()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] I2C: EXYNOS5: Set up the TX FIFO and RX FIFO for HSI2C
  • From: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH v5 1/3] i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c: imx: use of_alias_get_id to order i2c devices
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] gpio: Kontron PLD gpio driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: Add SMBus emulation for block read
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: remove CONFIG_HOTPLUG ifdefs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: Add SMBus emulation for block read
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] The AT24 driver only uses page size of 1 byte if no platform data is provided to the probe function. When this eeprom is detected via open firmware tree in powerpc architecture the correct chip type is given to the probe function. So the driver can extract the page size for optimal performance out of this chip type.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [5/7] i2c-designware: enable/disable the controller properly
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [4/7] i2c-designware: use dynamic adapter numbering on Lynxpoint
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [5/7] i2c-designware: enable/disable the controller properly
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [4/7] i2c-designware: use dynamic adapter numbering on Lynxpoint
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: how to gracefully unload an i2c driver if chip not detected?
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [5/7] i2c-designware: enable/disable the controller properly
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [1/7] i2c-designware: move to managed functions (devm_*)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [4/7] i2c-designware: use dynamic adapter numbering on Lynxpoint
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [1/7] i2c-designware: move to managed functions (devm_*)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [5/7] i2c-designware: enable/disable the controller properly
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [4/7] i2c-designware: use dynamic adapter numbering on Lynxpoint
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [3/7] i2c-designware-pci: use managed functions pcim_* and devm_*
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [1/7] i2c-designware: move to managed functions (devm_*)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] gpio: Kontron PLD gpio driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: mxs: always end a transfer with a proper STOP
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: mxs: always end a transfer with a proper STOP
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH RESEND] i2c: s3c2410: Add SMBus emulation for block read
  • From: Prasanna Kumar <prasanna.ps@xxxxxxxxxxx>
• Re: [PATCH] i2c: remove CONFIG_HOTPLUG ifdefs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: remove CONFIG_HOTPLUG ifdefs
  • From: Yijing Wang <wangyijing@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 1/5] i2c: stu300: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: mxs: do error checking and handling in PIO mode
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/3] i2c: mxs: always end a transfer with a proper STOP
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: mxs: do error checking and handling in PIO mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/4] gpio: Kontron PLD gpio driver
  • From: Kevin Strasser <kevin.strasser@xxxxxxxxxxxxxxx>
• [PATCH 1/4] mfd: Kontron PLD mfd driver
  • From: Kevin Strasser <kevin.strasser@xxxxxxxxxxxxxxx>
• [PATCH 4/4] watchdog: Kontron PLD watchdog timer
  • From: Kevin Strasser <kevin.strasser@xxxxxxxxxxxxxxx>
• [PATCH 2/4] i2c: Kontron PLD i2c bus driver
  • From: Kevin Strasser <kevin.strasser@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] i2c-designware: move to managed functions (devm_*)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH V10 2/2] i2c/designware: Provide i2c bus recovery support
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] i2c: davinci: rename "i2c_recover_bus" function
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH v7] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Chatradhi <naveenkrishna.ch@xxxxxxxxx>
• Re: [PATCH] i2c: davinci: rename "i2c_recover_bus" function
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: davinci: rename "i2c_recover_bus" function
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] i2c: davinci: rename "i2c_recover_bus" function
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: mxs: Slow down the I2C clock speed
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] ARM: mxs: Slow down the I2C clock speed
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 0/6] Make return type of i2c_del_adapter() (and i2c_del_mux_adapter()) void
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] ARM: mxs: Slow down the I2C clock speed
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 3/3] i2c: mxs: do error checking and handling in PIO mode
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/3] i2c: mxs: remove races in PIO code
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH V10 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices()
  • From: Aaron Lu <aaron.lu@xxxxxxxxx>
• [PATCH] ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 3/6] i2c: Ignore return value of i2c_del_adapter()
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 0/6] Make return type of i2c_del_adapter() (and i2c_del_mux_adapter()) void
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make the return type of i2c_del_mux_adapter() void
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 5/6] i2c: Ignore the return value of i2c_del_mux_adapter()
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 4/6] i2c: Make return type of i2c_del_adapter() void
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/6] i2c: Ignore return value of i2c_del_adapter()
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 0/6] Make return type of i2c_del_adapter() (and i2c_del_mux_adapter()) void
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 0/6] Make return type of i2c_del_adapter() (and i2c_del_mux_adapter()) void
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 0/6] Make return type of i2c_del_adapter() (and i2c_del_mux_adapter()) void
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/6] i2c: i2c_del_adapter: Don't treat removing a non-registered adapter as error
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/6] i2c: Remove detach_adapter
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/6] i2c: Ignore return value of i2c_del_adapter()
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/6] i2c: Ignore return value of i2c_del_adapter()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/6] i2c: Ignore return value of i2c_del_adapter()
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/6] i2c: Ignore return value of i2c_del_adapter()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/6] Make return type of i2c_del_adapter() (and i2c_del_mux_adapter()) void
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: at91: Use of_match_ptr() macro
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V4] i2c: davinci: update to devm_* API
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: davinci: rename recover bus functions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v6] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Chatradhi <naveenkrishna.ch@xxxxxxxxx>
• [PATCH v6] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Chatradhi <naveenkrishna.ch@xxxxxxxxx>
• [PATCH] i2c: remove CONFIG_HOTPLUG ifdefs
  • From: Yijing Wang <wangyijing@xxxxxxxxxx>
• Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3] i2c-mux-gpio: Check gpio_direction_output return value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-gpio: Add support for deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] i2c: s3c2410: Add SMBus emulation for block read
  • From: Prasanna Kumar <prasanna.ps@xxxxxxxxxxx>
• Re: [PATCH] i2c-gpio: Add support for deferred probing
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-gpio: Add support for deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH 1/3] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH 1/3] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC: PATCH v5] i2c: exynos5: add High Speed I2C controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] i2c: mpc: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 4/5] i2c:i2c-bfin-twi: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 3/5] i2c: puv3: add CONFIG_PM_SLEEP to suspend function
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 2/5] i2c: pnx: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 1/5] i2c: stu300: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: i2c_i801: status of use hardware semaphore patch?
  • From: Aaron Sierra <asierra@xxxxxxxxxxx>
• Re: [RFC: PATCH v5] i2c: exynos5: add High Speed I2C controller driver
  • From: Yuvaraj CD <yuvaraj.lkml@xxxxxxxxx>
• Re: [PATCH 1/3] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH V10 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] i2c-gpio: Add support for deferred probing
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 3.9
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Re: I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: EUNBONG SONG <eunb.song@xxxxxxxxxxx>
• Re: [PATCH] i2c: ismt: remove duplicate const
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-gpio: Add support for deferred probing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainer entry for atmel i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Fix my e-mail address in drivers and documentation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: iSMT SMBus patch for Intel Avoton DeviceIDs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: ismt: remove duplicate const
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: check the clk_prepare_enable() return value
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V2] i2c: tegra: assume CONFIG_OF, remove platform data
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] i2c: ocores: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 1/2] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 1/2] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: i2c_i801: status of use hardware semaphore patch?
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• i2c_i801: status of use hardware semaphore patch?
  • From: Jason Baron <jbaron@xxxxxxxxxx>
• [PATCH V2] i2c: tegra: assume CONFIG_OF, remove platform data
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: s3c2410: fixup the styling of the newly moved register definitions
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v2 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 4/7] i2c-designware: use dynamic adapter numbering on Lynxpoint
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 1/7] i2c-designware: move to managed functions (devm_*)
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 5/7] i2c-designware: enable/disable the controller properly
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 6/7] i2c-designware: use usleep_range() in the busy-loop
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 3/7] i2c-designware-pci: use managed functions pcim_* and devm_*
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 7/7] i2c-designware: switch to use runtime PM autosuspend
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH 2/7] i2c-designware-pci: use dev_err() instead of printk()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: pxa: Use i2c-core to get bus number now
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/12] i2c: i2c-mxs: move to use generic DMA helper
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: busses/i2c-pxa.c: fix potential null pointer dereference error
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH V10 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Shiraz Hashim <shiraz.hashim@xxxxxx>
• Re: [PATCH V10 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V10 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC: PATCH v5] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
• Current I2C workflow
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: i2c-mpc: make mpc_i2c_pm_ops static
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH] i2c: i2c-mpc: make mpc_i2c_pm_ops static
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• how to gracefully unload an i2c driver if chip not detected?
  • From: Émeric Vigier <emeric.vigier@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] The AT24 driver only uses page size of 1 byte if no platform data is provided to the probe function. When this eeprom is detected via open firmware tree in powerpc architecture the correct chip type is given to the probe function. So the driver can extract the page size for optimal performance out of this chip type.
  • From: Sergey Gerasimov <Sergey.Gerasimov@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
  • From: Sourav Poddar <sourav.poddar@xxxxxx>
• [PATCH] i2c: sirf: get the i2c pin group by pinctrl api
  • From: Barry Song <Barry.Song@xxxxxxx>
• Re: [PATCH] i2c: tegra: check the clk_prepare_enable() return value
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainer entry for atmel i2c driver
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH] MAINTAINERS: add maintainer entry for atmel i2c driver
  • From: <ludovic.desroches@xxxxxxxxx>
• [PATCH] i2c: tegra: check the clk_prepare_enable() return value
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• RE: [PATCH V4] i2c: davinci: update to devm_* API
  • From: "Vishwanathrao Badarkhe, Manish" <manishv.b@xxxxxx>
• Re: [PATCH V10 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH V10 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 3/3] i2c: mxs: do error checking and handling in PIO mode
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] i2c: mxs: remove races in PIO code
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: mxs: always end a transfer with a proper STOP
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/1] i2c: at91: Use of_match_ptr() macro
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v4 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [5/6] i2c: Ignore the return value of i2c_del_mux_adapter()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: add High Speed I2C controller driver
  • From: Simon Glass <sjg@xxxxxxxxxxxx>
• [PATCH] i2c: exynos5: add High Speed I2C controller driver
  • From: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
• [PATCH REPOST] i2c: tegra: assume CONFIG_OF, remove platform data
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 3/6] i2c: Ignore return value of i2c_del_adapter()
  • From: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 6/6] i2c: Make the return type of i2c_del_mux_adapter() void
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 5/6] i2c: Ignore the return value of i2c_del_mux_adapter()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 4/6] i2c: Make return type of i2c_del_adapter() void
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 3/6] i2c: Ignore return value of i2c_del_adapter()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 0/6] Make return type of i2c_del_adapter() (and i2c_del_mux_adapter()) void
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/6] i2c: i2c_del_adapter: Don't treat removing a non-registered adapter as error
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/6] i2c: Remove detach_adapter
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] i2c-mux-gpio: Check gpio_direction_output return value
  • From: "Peter Korsgaard" <peter.korsgaard@xxxxxxxxx>
• [PATCH v3] i2c-mux-gpio: Check gpio_direction_output return value
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [lm-sensors] Support for non-register devices
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 00/12] ARM: mxs: move to generic DMA device tree binding
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Cross compiling I2C code
  • From: Michael Powell <mwpowellhtx@xxxxxxxxx>
• Re: [PATCH v7] i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v7] i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• [PATCH v2 00/12] ARM: mxs: move to generic DMA device tree binding
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH v2 06/12] i2c: i2c-mxs: move to use generic DMA helper
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH V4] i2c: davinci: update to devm_* API
  • From: "Vishwanathrao Badarkhe, Manish" <manishv.b@xxxxxx>
• Re: [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration
  • From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
• Re: [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] i2c: s3c24xx: allow device core to setup default pin configuration
  • From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
• [PATCH v2] i2c: busses: i2c-ocores: Fix PM-related warning
  • From: <maxin.john@xxxxxxxx>
• Re: [PATCH] i2c: busses: i2c-ocores: Fix PM-related warning
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH] i2c: busses: i2c-ocores: Fix PM-related warning
  • From: "Maxin B. John" <maxin.john@xxxxxxxxx>
• [PATCH v2] i2c-mux-gpio: Check gpio_direction_output return value
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-mux-gpio: Check gpio_direction_output return value
  • From: "Peter Korsgaard" <peter.korsgaard@xxxxxxxxx>
• [PATCH] i2c-mux-gpio: Check gpio_direction_output return value
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: I2C and devicetrees
  • From: Mitch Bradley <wmb@xxxxxxxxxxxxx>
• Re: I2C and devicetrees
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: I2C and devicetrees
  • From: Mitch Bradley <wmb@xxxxxxxxxxxxx>
• Re: I2C and devicetrees
  • From: Thomas De Schampheleire <patrickdepinguin+devicetree@xxxxxxxxx>
• Re: [PATCH v4 1/2] i2c-core: dt: Pick i2c bus number from i2c alias if present
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v4 2/2] i2c: pxa: Use i2c-core to get bus number now
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 0/2] Add automatic bus number support for i2c busses with device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 1/2] i2c-core: dt: Pick i2c bus number from i2c alias if present
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: I2C and devicetrees
  • From: Thomas De Schampheleire <patrickdepinguin+linuxi2c@xxxxxxxxx>
• Re: [PATCH] i2c-gpio: Add support for deferred probing
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-gpio: Add support for deferred probing
  • From: Bo Shen <voice.shen@xxxxxxxxx>
• Re: [PATCH v3 0/2] Add automatic bus number support for i2c busses with device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add automatic bus number support for i2c busses with device tree
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c-gpio: Add support for deferred probing
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: anish singh <anish198519851985@xxxxxxxxx>
• [PATCH 06/12] i2c: i2c-mxs: move to use generic DMA helper
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add automatic bus number support for i2c busses with device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: Re: I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: 송은봉 <eunb.song@xxxxxxxxxxx>
• Re: I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: busses: i2c-ocores: Fix PM-related warning
  • From: maxin.john@xxxxxxxxx
• I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: 송은봉 <eunb.song@xxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 3.9
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: Fix my e-mail address in drivers and documentation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: iSMT SMBus patch for Intel Avoton DeviceIDs
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: I2C: Fix i2c fail problem when a process is terminated by a signal on octeon in 3.8
  • From: Jiri Kosina <jkosina@xxxxxxx>
• RE: [PATCH 1/1] i2c: iSMT SMBus patch for Intel Avoton DeviceIDs
  • From: "Heasley, Seth" <seth.heasley@xxxxxxxxx>
• [PULL REQUEST] i2c for 3.9
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 07/59] i2c/i2c-pxa: Fix possible NULL pointer dereference
  • From: Syam Sidhardhan <syamsidhardh@xxxxxxxxx>
• Re: [PATCH 07/59] i2c/i2c-pxa: Fix possible NULL pointer dereference
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] pinctrl: return real error codes when pinctrl is not included
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH] pinctrl: return real error codes when pinctrl is not included
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 07/59] i2c/i2c-pxa: Fix possible NULL pointer dereference
  • From: Syam Sidhardhan <syamsidhardh@xxxxxxxxx>
• Re: [PATCH] pinctrl: return real error codes when pinctrl is not included
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] pinctrl: return real error codes when pinctrl is not included
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] i2c: s3c2410: check for NULL pinctrl handle
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] pinctrl: return real error codes when pinctrl is not included
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] pinctrl or i2c-s3c2410: fix pinctrl NULL return values in stubs
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 1/1] i2c: iSMT SMBus patch for Intel Avoton DeviceIDs
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] i2c: iSMT SMBus patch for Intel Avoton DeviceIDs
  • From: "Heasley, Seth" <seth.heasley@xxxxxxxxx>
• Re: [PATCH 1/1] i2c: iSMT SMBus patch for Intel Avoton DeviceIDs
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• [PATCH 1/1] i2c: iSMT SMBus patch for Intel Avoton DeviceIDs
  • From: Seth Heasley <seth.heasley@xxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Don't start transfers when suspending
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Don't start transfers when suspending
  • From: Bastian Hecht <hechtb@xxxxxxxxx>
• Re: [PATCH] I2C: i2c-pxa - remove incorrect __exit annotations
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: ocores: Fix pointer to integer cast warning
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Don't start transfers when suspending
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH V3] i2c: davinci: update to devm_* API
  • From: "Vishwanathrao Badarkhe, Manish" <manishv.b@xxxxxx>
• [PATCH] I2C: i2c-pxa - remove incorrect __exit annotations
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] i2c: ocores: Fix pointer to integer cast warning
  • From: Andreas Larsson <andreas@xxxxxxxxxxx>
• Re: [PATCH] i2c: ocores: Fix pointer to integer cast warning
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• [PATCH] i2c: ocores: Fix pointer to integer cast warning
  • From: "Jayachandran C" <jchandra@xxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Don't start transfers when suspending
  • From: Bastian Hecht <hechtb@xxxxxxxxx>
• Re: i2c: Multiplexed I2C bus core support
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH v3] i2c-designware: make SDA hold time configurable
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v3] i2c-designware: make SDA hold time configurable
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
• Re: [PATCH v2] i2c-designware: make SDA hold time configurable
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: i2c: Multiplexed I2C bus core support
  • From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
• Re: i2c: Multiplexed I2C bus core support
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• [PATCH v2] i2c-designware: make SDA hold time configurable
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
• Re: [PATCH] I2C: add i2c_master_send_exact() and friends
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] I2C: add i2c_master_send_exact() and friends
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Don't start transfers when suspending
  • From: Magnus Damm <magnus.damm@xxxxxxxxx>
• [PATCH] I2C: add i2c_master_send_exact() and friends
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] I2C: add i2c_master_send_exact() and friends
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Don't start transfers when suspending
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: Remove unneeded platform_set_drvdata to NULL in remove
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c: tegra: assume CONFIG_OF, remove platform data
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: remove warning dump if timeout happen in transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: Remove unneeded platform_set_drvdata to NULL in remove
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH -next] i2c: fix i2c-ismt.c printk format warning
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: Remove unneeded platform_set_drvdata to NULL in remove
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: remove warning dump if timeout happen in transfer
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: Remove unneeded platform_set_drvdata to NULL in remove
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: remove warning dump if timeout happen in transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V3] i2c: davinci: update to devm_* API
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH -next] i2c: fix i2c-ismt.c printk format warning
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: i2c/i2c-mxs: use devm_request_and_ioremap
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH -next] i2c: fix i2c-ismt.c printk format warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] i2c: mux: Remove unneeded platform_set_drvdata to NULL in remove
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: Interrupt sharing and SDA hold time
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: mux: Add i2c-arbitrator-cros-ec 'mux' driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: Interrupt sharing and SDA hold time
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: remove warning dump if timeout happen in transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: remove warning dump if timeout happen in transfer
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH 10/11] ARM: s3c: i2c: add platform_device forward declaration
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-designware: Interrupt sharing and SDA hold time
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] i2c-designware: Interrupt sharing and SDA hold time
  • From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
• Re: [PATCH v3] i2c-i801: Add Device IDs for Intel Wellsburg PCH
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH v3] i2c-i801: Add Device IDs for Intel Wellsburg PCH
  • From: James Ralston <james.d.ralston@xxxxxxxxx>
• [PATCH] i2c: sh_mobile: Don't start transfers when suspending
  • From: Bastian Hecht <hechtb@xxxxxxxxx>
• Re: [PATCH v3] i2c: busses/i2c-pxa.c: fix potential null pointer dereference error
  • From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
• [PATCH 10/11] ARM: s3c: i2c: add platform_device forward declaration
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] i2c: tegra: remove warning dump if timeout happen in transfer
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH] i2c: tegra: remove warning dump if timeout happen in transfer
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH v3] i2c: busses/i2c-pxa.c: fix potential null pointer dereference error
  • From: Cong Ding <dinggnu@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: vt8500: Add support for Wondermedia I2C master-mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] Congatec CGEB base, i2c and watchdog driver support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] i2c-mux: i2c_add_mux_adapter() should use -1 for auto bus num
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: vt8500: Add support for Wondermedia I2C master-mode
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c-mux: create mux busses under a different parent device
  • From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
• [PATCH 2/2] i2c-mux: create "channel-n" symlinks for child segments
  • From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
• [PATCH 0/2] i2c-mux: expose i2c bus topology under sysfs
  • From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
• Re: [PATCH 1/1] i2c-i801: Add Device IDs for Intel Wellsburg PCH
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v1 4/4] i2c-mux: i2c_add_mux_adapter() should use -1 for auto bus num
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/4] i2c: mux: Add i2c-arbitrator 'mux' driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH -mm] i2c: style cleanups after idr_alloc() conversion
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c/for-current
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] i2c-mux: i2c_add_mux_adapter() should use -1 for auto bus num
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: vt8500: Add support for Wondermedia I2C master-mode
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/4] i2c: mux: Add i2c-arbitrator 'mux' driver
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v1 1/4] i2c: mux: Add i2c-arbitrator 'mux' driver
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH v1 4/4] i2c-mux: i2c_add_mux_adapter() should use -1 for auto bus num
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v1 1/4] i2c: mux: Add i2c-arbitrator 'mux' driver
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• i2c: Multiplexed I2C bus core support
  • From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
• Re: [PATCH] Congatec CGEB base, i2c and watchdog driver support
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: mxs: support non-dma mapable buffers
  • From: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: mxs: support non-dma mapable buffers
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: mxs: support non-dma mapable buffers
  • From: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
• Re: [i2c-mxs] Broken DMA operations from within a module
  • From: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
• Re: [i2c-mxs] Broken DMA operations from within a module
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [i2c-mxs] Broken DMA operations from within a module
  • From: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
• [PATCH 1/1] i2c-i801: Add Device IDs for Intel Wellsburg PCH
  • From: James Ralston <james.d.ralston@xxxxxxxxx>
• Re: [PATCH -mm] i2c: style cleanups after idr_alloc() conversion
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• RE: [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• RE: [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH -mm] i2c: style cleanups after idr_alloc() conversion
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH -mm] i2c: style cleanups after idr_alloc() conversion
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: I2C and devicetrees
  • From: Gerlando Falauto <gerlando.falauto@xxxxxxxxxxx>
• Re: [PATCH V4] i2c: add bcm2835 driver
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• Re: [PATCH V3] i2c: add bcm2835 driver
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• [PATCH] Congatec CGEB base, i2c and watchdog driver support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] watchdog: Add Congatec CGEB watchdog driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC] i2c: Providing hooks for i2c multimaster bus arbitration.
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• [PATCH 1/3] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] i2c: Add Congatec CGEB I2C driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH V4] i2c: add bcm2835 driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH V3] i2c: add bcm2835 driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH v3 0/2] Add automatic bus number support for i2c busses with device tree
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 2/2] i2c: pxa: Use i2c-core to get bus number now
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c-core: dt: Pick i2c bus number from i2c alias if present
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 1/2] i2c-core: dt: Pick i2c bus number from i2c alias if present
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [RFC] i2c: Providing hooks for i2c multimaster bus arbitration.
  • From: Simon Glass <sjg@xxxxxxxxxx>
• Re: [RFC] i2c: Providing hooks for i2c multimaster bus arbitration.
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [GIT PULL] i2c: vt8500: Add support for Wondermedia I2C master-mode
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• Re: [PATCH V3] i2c: add bcm2835 driver
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• Re: [PATCH RFC] misc/at24: distinguish between eeprom and fram chips
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• RE: [PATCH 2/6] idr: remove MAX_IDR_MASK and move left MAX_IDR_* into idr.c
  • From: "Hefty, Sean" <sean.hefty@xxxxxxxxx>
• Re: [PATCH] i2c: at91: fix unsed variable warning when building with !CONFIG_OF
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c-i801: Add Device IDs for Intel Wellsburg PCH
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [RFC] i2c: Providing hooks for i2c multimaster bus arbitration.
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH v3] i2c-ismt: Add Seth and Myself as maintainers
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH RFC] misc/at24: distinguish between eeprom and fram chips
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] i2c: sh_mobile: fix STOP condition generation
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] mxs: i2c: Implement arbitrary clock speed derivation algorithm
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• Re: [RFC PATCH] mxs: i2c: Implement arbitrary clock speed derivation algorithm
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RFC PATCH] mxs: i2c: Implement arbitrary clock speed derivation algorithm
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c-core: dt: Pick i2c bus number from i2c alias if present
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] idr: remove MAX_IDR_MASK and move left MAX_IDR_* into idr.c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: convert to idr_alloc()
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c-ismt: Add Seth and Myself as maintainers
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/6] idr: remove MAX_IDR_MASK and move left MAX_IDR_* into idr.c
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c-i801: Add Device IDs for Intel Wellsburg PCH
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c: at91: fix unsed variable warning when building with !CONFIG_OF
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH 2/2] gpio: mcp23s08: convert driver to DT
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/2] gpio: mcp23s08: Allow -1 as a legal value for global gpio base
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH RFC 1/1] gpio: mcp23s08: convert driver to DT
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH V3] i2c: add bcm2835 driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH 3/5] i2c-i801: Add Device IDs for Intel Wellsburg PCH
  • From: James Ralston <james.d.ralston@xxxxxxxxx>
• RE: [PATCH 2/6] idr: remove MAX_IDR_MASK and move left MAX_IDR_* into idr.c
  • From: "Hefty, Sean" <sean.hefty@xxxxxxxxx>
• Re: [PATCH] i2c: add bcm2835 driver
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH] MAINTAINERS: change my email and repos
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• [PATCH 2/6] idr: remove MAX_IDR_MASK and move left MAX_IDR_* into idr.c
  • From: Tejun Heo <tj@xxxxxxxxxx>
• [PATCH v2] i2c-ismt: Add Seth and Myself as maintainers
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-ismt: Add Seth and Myself as maintainers
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c-ismt: Add Seth and Myself as maintainers
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• RE: i2c-ismt driver maintenance
  • From: "Heasley, Seth" <seth.heasley@xxxxxxxxx>
• Re: [PATCH v4] i2c: exynos5: add High Speed I2C controller driver
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: i2c-ismt driver maintenance
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: convert to idr_alloc()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• i2c-ismt driver maintenance
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 2/2] i2c: s3c2410: fixup the styling of the newly moved register definitions
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH 1/2] i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2] i2c: convert to idr_alloc()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] i2c: convert to idr_alloc()
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 37/77] i2c: convert to idr_alloc()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 37/77] i2c: convert to idr_alloc()
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH 37/77] i2c: convert to idr_alloc()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V3] i2c: davinci: update to devm_* API
  • From: "Vishwanathrao Badarkhe, Manish" <manishv.b@xxxxxx>
• Re: [PATCH] ARM: davinci: da850: add DT node for I2C0
  • From: Sekhar Nori <nsekhar@xxxxxx>
• RE: [PATCH V2] i2c: davinci: update to devm_* API
  • From: "Vishwanathrao Badarkhe, Manish" <manishv.b@xxxxxx>
• [PATCH 37/77] i2c: convert to idr_alloc()
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH RFC] misc/at24: distinguish between eeprom and fram chips
  • From: Lars Poeschel <poeschel@xxxxxxxxxxx>
• [PATCH 0/2] Convert mcp23s08 to DT usage
  • From: Lars Poeschel <larsi@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] gpio: mcp23s08: Allow -1 as a legal value for global gpio base
  • From: Lars Poeschel <larsi@xxxxxxxxxxxxxxxxx>
• [PATCH 2/2] gpio: mcp23s08: convert driver to DT
  • From: Lars Poeschel <larsi@xxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] i2c: davinci: update to devm_* API
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH V2] i2c: davinci: update to devm_* API
  • From: "Vishwanathrao Badarkhe, Manish" <manishv.b@xxxxxx>
• Re: [PATCH RFC 1/1] gpio: mcp23s08: convert driver to DT
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>