Using autosuspend helps to reduce the resume latency in situations where another I2C message is going to be started soon. For example with HID over I2C touch panels we get several messages in a short period of time while the touch panel is in use. Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-designware-core.c | 3 ++- drivers/i2c/busses/i2c-designware-pcidrv.c | 3 ++- drivers/i2c/busses/i2c-designware-platdrv.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 0849648..71d33e6 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -595,7 +595,8 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) ret = -EIO; done: - pm_runtime_put(dev->dev); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); mutex_unlock(&dev->lock); return ret; diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index aacb64e..c8797e2 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -291,7 +291,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, /* Increase reference counter */ get_device(&pdev->dev); - pm_runtime_put_noidle(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); + pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_allow(&pdev->dev); return 0; diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index a22a852..46a25ca 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -175,9 +175,10 @@ static int dw_i2c_probe(struct platform_device *pdev) /* Increase reference counter */ get_device(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); + pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); - pm_runtime_put(&pdev->dev); return 0; } -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
